AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

220-2014 PUMP GP-FUEL INJECTION S/N 1ML1-3381 ALSO AN ATTACHMENT 3056 INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE 3056 INDUSTRIAL ENGINE 1ML
 3056 Industrial Engine 1ML00001-UP SEBP2043 3056 1ML   (1991)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
216-1412 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
220-1968 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
220-2014 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
220-2014 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-0779 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-0779 PUMP GP-FUEL INJECTION
 

#SEBP20430590
 

220-2014: PUMP GP-FUEL INJECTION

220-2014 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01780525 SEBP2043
2202014 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 BL LOCKWIRE (0.1-M)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [4] NUT (M8X1.25-THD)  
4. 7C-9255 [6] CLAMP  
5. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
6. 7W-0187 [6] SEAL  
7. 033-7625 [1] ELBOW  
8. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
9. 365-3308 [1] NUT-COMPRESSION  
10. 067-6265 [1] FITTING-BRASS  
11. 067-6300 [2] DAMPER  
12. 067-6301 [2] PLATE  
13. 067-6312 [3] BOLT  
14. 067-6317 [2] WASHER (0.4X0.566X0.04-IN THK)  
15. 067-6980 [3] BOLT (M8X1.25-THD)  
16. 067-6998 [2] NUT (3/8-24-THD)  
17. 067-6999 [2] FERRULE  
18. 067-7006 [1] SEAL  
19. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 101-3878 [1] GEAR (56-TEETH)  
22. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
23. 101-3908 [1] BOLT  
24. 101-3909 [1] LOCKNUT (M5-THD)  
25. 102-9903 [1] LINE-DRAIN  
26. 111-3422 M [1] NUT (M14X1.5-THD)  
27. 111-3423 [1] WASHER  
28. 121-4492 [1] SLEEVE  
29. 124-3708 [1] CLIP  
30. 133-3807 [1] TUBE AS  
30A. 067-6999 [1] FERRULE  
30B. 101-3986 [1] CLIP  
30C. 106-8835 [1] NUT  
31. 136-7022 [1] BRACKET  
32. 218-2897 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  147-5514 [1] HOLDER  
32A. 147-5515 [1] NOZZLE  
33. 162-9992 [1] CLIP  
34. 162-9993 [1] CLIP  
35. 162-9994 [1] CLIP  
36. 198-5804 [1] GASKET (FUEL PUMP)  
37. 218-2857 [12] WASHER  
38. 218-2858 [1] LINE AS-FUEL  
38A. 067-6999 [1] FERRULE  
38B. 106-8835 [1] NUT  
39. 218-2928 [1] LINE AS-FUEL  
39A. 067-6999 [1] FERRULE  
39B. 106-8835 [1] NUT  
40. 218-2945 [1] BOLT (BANJO)  
41. 220-2006 [1] TUBE AS (CYLINDER ONE)(CYLINDER NO 1)  
42. 220-2007 [1] TUBE AS (CYLINDER TWO)(CYLINDER NO 2)  
43. 220-2008 [1] TUBE AS (CYLINDER THREE)(CYLINDER NO 3)  
44. 220-2009 [1] TUBE AS (CYLINDER FOUR)(CYLINDER NO 4)  
45. 220-2010 [1] TUBE AS (CYLINDER FIVE)(CYLINDER NO 5)  
46. 220-2011 [1] TUBE AS (CYLINDER SIX)(CYLINDER NO 6)  
47. 220-1968 Y [1] PUMP GP-FUEL INJECTION  
  B   USE AS REQUIRED
  L   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430591
 

220-2014: PUMP GP-FUEL INJECTION

220-2014 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02212398 SEBP2043
2202014 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 BL LOCKWIRE (0.1-M)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [4] NUT (M8X1.25-THD)  
4. 7C-9255 [6] CLAMP  
5. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
6. 295-1295 [6] SEAL  
7. 033-7625 [1] ELBOW  
8. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
9. 365-3308 [1] NUT-COMPRESSION  
10. 067-6265 [1] FITTING-BRASS  
11. 067-6300 [2] DAMPER  
12. 067-6301 [2] PLATE  
13. 243-5020 C [3] BOLT (M8X0.75X21.5-MM)  
14. 067-6317 [2] WASHER (0.4X0.566X0.04-IN THK)  
15. 243-5386 C [3] BOLT (M8X0.75X28.5-MM)  
16. 067-6998 [2] NUT (3/8-24-THD)  
17. 067-6999 [2] FERRULE  
18. 067-7006 [1] SEAL  
19. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 101-3878 [1] GEAR (56-TEETH)  
22. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
23. 101-3908 [1] BOLT  
24. 101-3909 [1] LOCKNUT (M5-THD)  
25. 102-9903 [1] LINE-DRAIN  
26. 111-3422 M [1] NUT (M14X1.5-THD)  
27. 111-3423 [1] WASHER  
28. 121-4492 [1] SLEEVE  
29. 124-3708 [1] CLIP  
30. 133-3807 [1] TUBE AS  
30A. 067-6999 [1] FERRULE  
30B. 101-3986 [1] CLIP  
30C. 106-8835 [1] NUT  
31. 136-7022 [1] BRACKET  
32. 218-2897 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  147-5514 [1] HOLDER  
32A. 147-5515 [1] NOZZLE  
33. 162-9992 [1] CLIP  
34. 162-9993 [1] CLIP  
35. 162-9994 [1] CLIP  
36. 198-5804 [1] GASKET (FUEL PUMP)  
37. 243-5393 C [12] WASHER (8.35X12.45X1.55-MM THK)  
38. 218-2858 [1] LINE AS-FUEL  
38A. 067-6999 [1] FERRULE  
38B. 106-8835 [1] NUT  
39. 218-2928 [1] LINE AS-FUEL  
39A. 067-6999 [1] FERRULE  
39B. 106-8835 [1] NUT  
40. 218-2945 [1] BOLT (BANJO)  
41. 220-2006 [1] TUBE AS (CYLINDER ONE)(CYLINDER NO 1)  
42. 220-2007 [1] TUBE AS (CYLINDER TWO)(CYLINDER NO 2)  
43. 220-2008 [1] TUBE AS (CYLINDER THREE)(CYLINDER NO 3)  
44. 220-2009 [1] TUBE AS (CYLINDER FOUR)(CYLINDER NO 4)  
45. 220-2010 [1] TUBE AS (CYLINDER FIVE)(CYLINDER NO 5)  
46. 220-2011 [1] TUBE AS (CYLINDER SIX)(CYLINDER NO 6)  
47. 220-1968 Y [1] PUMP GP-FUEL INJECTION  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  L   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430592
 

221-0779: PUMP GP-FUEL INJECTION

221-0779 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01794710 SEBP2043
2210779 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 147-5512 Y [1] PUMP GP-FUEL INJECTION  
2. 114-2573 [1] SLEEVE  
3. 067-7006 [1] SEAL  
4. 216-4339 D [1] WIRE-LOCK  
5. 154-6016 [1] GEAR-PUMP (56-TEETH)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 6I-0291 M [3] NUT (M8X1.25-THD)  
8. 103-1027 [1] LINE AS (CYLINDER ONE)  
9. 103-1028 [1] LINE AS (CYLINDER TWO)  
10. 103-1026 [1] LINE AS (CYLINDER THREE)  
11. 103-1024 [1] LINE AS (CYLINDER FOUR)  
12. 103-1025 [1] LINE AS (CYLINDER FIVE)  
13. 103-1023 [1] LINE AS (CYLINDER SIX)  
14. 147-5513 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14A. 147-5514 [1] HOLDER  
14B. 147-5515 [1] NOZZLE  
15. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
16. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
17. 7W-0187 [6] SEAL  
18. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
19. 102-9903 [1] LINE-DRAIN  
20. 124-3714 [5] BOLT  
21. 218-2857 [12] WASHER  
22. 067-6980 [1] BOLT (M8X1.25-THD)  
23. 101-3892 [1] CLIP  
24. 102-9904 [4] BOLT  
25. 102-9905 [1] CLIP  
26. 102-9906 [1] CLIP  
27. 102-9907 [1] CLIP  
28. 7C-9255 [6] CLAMP  
31. 067-6265 [1] FITTING-BRASS  
32. 033-7625 [1] ELBOW  
33. 365-3308 [1] NUT-COMPRESSION  
34. 100-4458 M [1] BOLT (M8X1.25X14-MM)  
35. 107-2347 [1] TUBE AS  
36. 101-3985 [1] CLIP  
37. 107-2348 [2] CLIP  
38. 107-2349 [1] HOSE  
39. 197-3907 [4] BOLT (M8X1.25X16-MM)  
40. 169-5326 [1] SWITCH-TEMPERATURE  
41. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
42. 162-0807 [1] LEAD  
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430593
 

221-0779: PUMP GP-FUEL INJECTION

221-0779 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02212410 SEBP2043
2210779 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 147-5512 Y [1] PUMP GP-FUEL INJECTION  
2. 114-2573 [1] SLEEVE  
3. 067-7006 [1] SEAL  
4. 216-4339 D [1] WIRE-LOCK  
5. 154-6016 [1] GEAR-PUMP (56-TEETH)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 6I-0291 M [3] NUT (M8X1.25-THD)  
8. 103-1027 [1] LINE AS (CYLINDER ONE)  
9. 103-1028 [1] LINE AS (CYLINDER TWO)  
10. 103-1026 [1] LINE AS (CYLINDER THREE)  
11. 103-1024 [1] LINE AS (CYLINDER FOUR)  
12. 103-1025 [1] LINE AS (CYLINDER FIVE)  
13. 103-1023 [1] LINE AS (CYLINDER SIX)  
14. 147-5513 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14A. 147-5514 [1] HOLDER  
14B. 147-5515 [1] NOZZLE  
15. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
16. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
17. 295-1295 [6] SEAL  
18. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
19. 102-9903 [1] LINE-DRAIN  
20. 243-5020 C [5] BOLT (M8X0.75X21.5-MM)  
21. 243-5393 C [12] WASHER (8.35X12.45X1.55-MM THK)  
22. 243-5386 C [1] BOLT (M8X0.75X28.5-MM)  
23. 101-3892 [1] CLIP  
24. 102-9904 [4] BOLT  
25. 102-9905 [1] CLIP  
26. 102-9906 [1] CLIP  
27. 102-9907 [1] CLIP  
28. 7C-9255 [6] CLAMP  
31. 067-6265 [1] FITTING-BRASS  
32. 033-7625 [1] ELBOW  
33. 365-3308 [1] NUT-COMPRESSION  
34. 100-4458 M [1] BOLT (M8X1.25X14-MM)  
35. 107-2347 [1] TUBE AS  
36. 101-3985 [1] CLIP  
37. 107-2348 [2] CLIP  
38. 107-2349 [1] HOSE  
39. 197-3907 [4] BOLT (M8X1.25X16-MM)  
40. 169-5326 [1] SWITCH-TEMPERATURE  
41. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
42. 162-0807 [1] LEAD  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430594
 

221-2972: PUMP GP-FUEL INJECTION

221-2972 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01781573 SEBP2043
2212972 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 7C-9255 [6] CLAMP  
3. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
4. 7W-0187 [6] SEAL  
5. 9F-2247 [1] PLUG-PIPE  
6. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
7. 067-6312 [5] BOLT  
8. 067-6980 [1] BOLT (M8X1.25-THD)  
9. 067-7006 [1] SEAL  
10. 101-3877 [3] STUD (M8X1.25X37-MM)  
11. 101-3878 [1] GEAR (56-TEETH)  
12. 101-3892 [1] CLIP  
13. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
14. 102-9895 [1] LINE AS (CYLINDER ONE)  
15. 102-9896 [1] LINE AS (CYLINDER TWO)  
16. 102-9897 [1] LINE AS (CYLINDER THREE)  
17. 102-9898 [1] LINE AS (CYLINDER FOUR)  
18. 102-9899 [1] LINE AS (CYLINDER FIVE)  
19. 102-9900 [1] LINE AS (CYLINDER SIX)  
20. 102-9903 [1] LINE-DRAIN  
21. 102-9904 [4] BOLT  
22. 102-9905 [1] CLIP  
23. 102-9906 [1] CLIP  
24. 102-9907 [1] CLIP  
25. 107-2561 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  101-3899 [1] HOLDER  
27. 107-2562 [1] NOZZLE  
28. 111-3422 M [1] NUT (M14X1.5-THD)  
29. 111-3423 [1] WASHER  
30. 114-2573 [1] SLEEVE  
31. 216-4339 [1] WIRE-LOCK  
32. 218-2857 [12] WASHER  
33. 221-2967 [1] PUMP GP-FUEL INJECTION  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20430595
 

221-2972: PUMP GP-FUEL INJECTION

221-2972 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02212423 SEBP2043
2212972 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 7C-9255 [6] CLAMP  
3. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
4. 295-1295 [6] SEAL  
5. 9F-2247 [1] PLUG-PIPE  
6. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
7. 243-5020 C [5] BOLT (M8X0.75X21.5-MM)  
8. 243-5386 C [1] BOLT (M8X0.75X28.5-MM)  
9. 067-7006 [1] SEAL  
10. 101-3877 [3] STUD (M8X1.25X37-MM)  
11. 101-3878 [1] GEAR (56-TEETH)  
12. 101-3892 [1] CLIP  
13. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
14. 102-9895 [1] LINE AS (CYLINDER ONE)  
15. 102-9896 [1] LINE AS (CYLINDER TWO)  
16. 102-9897 [1] LINE AS (CYLINDER THREE)  
17. 102-9898 [1] LINE AS (CYLINDER FOUR)  
18. 102-9899 [1] LINE AS (CYLINDER FIVE)  
19. 102-9900 [1] LINE AS (CYLINDER SIX)  
20. 102-9903 [1] LINE-DRAIN  
21. 102-9904 [4] BOLT  
22. 102-9905 [1] CLIP  
23. 102-9906 [1] CLIP  
24. 102-9907 [1] CLIP  
25. 107-2561 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  101-3899 [1] HOLDER  
27. 107-2562 [1] NOZZLE  
28. 111-3422 M [1] NUT (M14X1.5-THD)  
29. 111-3423 [1] WASHER  
30. 114-2573 [1] SLEEVE  
31. 216-4339 [1] WIRE-LOCK  
32. 243-5393 C [12] WASHER (8.35X12.45X1.55-MM THK)  
33. 221-2967 [1] PUMP GP-FUEL INJECTION  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20430596
 

221-4019: PUMP GP-FUEL INJECTION

221-4019 PUMP GP-FUEL INJECTION
PART OF 221-4029 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i01781031 SEBP2043
2214019 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-6219 [1] SOLENOID (12-VOLT)  
2. 193-0161 [1] CABLE AS-ADAPTER  
 

#SEBP20430597
 

221-4029: PUMP GP-FUEL INJECTION

221-4029 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01781032 SEBP2043
2214029 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 [1] LOCKWIRE  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [4] NUT (M8X1.25-THD)  
4. 7C-9255 [6] CLAMP  
5. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
6. 7W-0187 [6] SEAL  
7. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
8. 067-6312 [4] BOLT  
9. 067-6980 [2] BOLT (M8X1.25-THD)  
10. 067-6998 [1] NUT (3/8-24-THD)  
11. 067-6999 [1] FERRULE  
12. 067-7006 [1] SEAL  
13. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
14. 101-3877 [3] STUD (M8X1.25X37-MM)  
15. 101-3878 [1] GEAR (56-TEETH)  
16. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
17. 102-9903 [1] LINE-DRAIN  
18. 111-3422 M [1] NUT (M14X1.5-THD)  
19. 111-3423 [1] WASHER  
20. 121-4492 [1] SLEEVE  
21. 124-3708 [2] CLIP  
22. 136-7022 [1] BRACKET  
23. 162-9992 [1] CLIP  
24. 162-9993 [1] CLIP  
25. 162-9994 [1] CLIP  
26. 198-5804 [1] GASKET (FUEL PUMP)  
27. 218-2857 [12] WASHER  
28. 220-0495 [1] LINE AS-FUEL  
29. 221-4019 Y [1] PUMP GP-FUEL INJECTION  
30. 221-4021 [1] TUBE AS (CYLINDER ONE)  
31. 221-4022 [1] TUBE AS (CYLINDER TWO)  
32. 221-4023 [1] TUBE AS (CYLINDER THREE)  
33. 221-4024 [1] TUBE AS (CYLINDER FOUR)  
34. 221-4025 [1] TUBE AS (CYLINDER FIVE)  
35. 221-4026 [1] TUBE AS (CYLINDER SIX)  
36. 221-4027 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
37. 7W-2596 [1] HOLDER  
38. 220-0491 [1] NOZZLE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430598
 

221-4029: PUMP GP-FUEL INJECTION

221-4029 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02212424 SEBP2043
2214029 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 [1] LOCKWIRE  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [4] NUT (M8X1.25-THD)  
4. 7C-9255 [6] CLAMP  
5. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
6. 295-1295 [6] SEAL  
7. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
8. 243-5020 C [4] BOLT (M8X0.75X21.5-MM)  
9. 243-5386 C [2] BOLT (M8X0.75X28.5-MM)  
10. 067-6998 [1] NUT (3/8-24-THD)  
11. 067-6999 [1] FERRULE  
12. 067-7006 [1] SEAL  
13. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
14. 101-3877 [3] STUD (M8X1.25X37-MM)  
15. 101-3878 [1] GEAR (56-TEETH)  
16. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
17. 102-9903 [1] LINE-DRAIN  
18. 111-3422 M [1] NUT (M14X1.5-THD)  
19. 111-3423 [1] WASHER  
20. 121-4492 [1] SLEEVE  
21. 124-3708 [2] CLIP  
22. 136-7022 [1] BRACKET  
23. 162-9992 [1] CLIP  
24. 162-9993 [1] CLIP  
25. 162-9994 [1] CLIP  
26. 198-5804 [1] GASKET (FUEL PUMP)  
27. 243-5393 C [12] WASHER (8.35X12.45X1.55-MM THK)  
28. 220-0495 [1] LINE AS-FUEL  
29. 221-4019 Y [1] PUMP GP-FUEL INJECTION  
30. 221-4021 [1] TUBE AS (CYLINDER ONE)  
31. 221-4022 [1] TUBE AS (CYLINDER TWO)  
32. 221-4023 [1] TUBE AS (CYLINDER THREE)  
33. 221-4024 [1] TUBE AS (CYLINDER FOUR)  
34. 221-4025 [1] TUBE AS (CYLINDER FIVE)  
35. 221-4026 [1] TUBE AS (CYLINDER SIX)  
36. 221-4027 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
37. 7W-2596 [1] HOLDER  
38. 220-0491 [1] NOZZLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430599
 

222-1148: PUMP GP-FUEL INJECTION

222-1148 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01781481 SEBP2043
2221148 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 7C-9255 [6] CLAMP  
3. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
4. 7W-0187 [6] SEAL  
5. 9F-2247 [1] PLUG-PIPE  
6. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
7. 067-7006 [1] SEAL  
8. 101-3892 [1] CLIP  
9. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
10. 102-9904 [4] BOLT  
11. 102-9905 [1] CLIP  
12. 102-9906 [1] CLIP  
13. 102-9907 [1] CLIP  
14. 103-1027 [1] LINE AS (CYLINDER ONE)  
15. 103-1028 [1] LINE AS (CYLINDER TWO)  
16. 103-1026 [1] LINE AS (CYLINDER THREE)  
17. 103-1024 [1] LINE AS (CYLINDER FOUR)  
18. 103-1025 [1] LINE AS (CYLINDER FIVE)  
19. 103-1023 [1] LINE AS (CYLINDER SIX)  
20. 111-3422 M [1] NUT (M14X1.5-THD)  
21. 111-3423 [1] WASHER  
22. 114-2573 [1] SLEEVE  
25. 116-8572 [1] SEAL  
26. 124-3713 [1] CONNECTION  
27. 124-3714 [5] BOLT  
28. 126-2225 [1] GEAR  
29. 126-2243 [1] LINE-LEAKOFF  
30. 126-2245 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  126-2247 [1] HOLDER  
32. 126-2249 [1] NOZZLE  
35. 101-3877 [3] STUD (M8X1.25X37-MM)  
36. 203-6797 [1] SENSOR-SPEED (TIMING ADVANCE)  
37. 203-6798 [1] ADAPTER  
38. 204-7853 [12] WASHER  
39. 210-6709 [1] COVER  
40. 216-4339 [1] WIRE-LOCK  
41. 222-1129 [1] PUMP GP-FUEL INJECTION  
   
  116-7068 F [1] GASKET  
  116-7073 F [1] SEAL  
  135-5016 F [1] CAP  
  135-5017 F [1] CAP  
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
O-Ring Seal In Fuel Injection Pump Group Is A Serviceable Part{1251}
1994/04/18
3054 And 3056 Commercial Engine Fuel Injection Pump Service{1251}
1994/11/01
Fuel System Component Information {1254}
1996/01/17
Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/11/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/01
Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}
1999/01/01
Remanufactured Stanadyne Fuel Injection Pumps are Available for 3054 and 3056 Engines {1251}
2000/11/01
Support for Fuel Injection Pumps {1251}
2008/07/14
Delphi Fuel Injection Pumps on 3054, 3056, 3054B, 3054C, C3.3, C4.4 (MECH), and C7.1 (MECH)Engines {1251}
2013/07/30
Operation and Maintenance Manual
Fuel Injection Nozzles - Test/Exchange
3054 and 3056 Industrial and Generator Set Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines
Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines
Specifications
Fuel Injection Pump
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles
3054 and 3056 Industrial and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Timing - Check
3054 and 3056 Industrial and Generator Set Engines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles - Install
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Install
3054 and 3056 Industrial and Generator Set Engines
Service Magazine
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps {1251,1251,1000}
1998/08/17
Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3056 :

PUMP GP-FUEL INJECTION
220-1968 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
216-1412 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
216-1412 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
184-2519 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
147-5512 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
137-4316 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
137-4315 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
103-2878 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
220-2014 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-0779 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-0779 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-2972 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-2972 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-4019 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-4029 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-4029 PUMP GP-FUEL INJECTION

Truck sale:

CATERPILLAR 3056 1999
 
CATERPILLAR 3056 1999
- STATIONARY GENERATOR SETS
HEWITT EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.