AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

222-1148 PUMP GP-FUEL INJECTION S/N 1ML3382-UP ALSO AN ATTACHMENT 3056 INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE 3056 INDUSTRIAL ENGINE 1ML
 3056 Industrial Engine 1ML00001-UP SEBP2043 3056 1ML   (1991)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-4029 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
222-1148 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
222-1148 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
222-1392 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
222-1392 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
223-9013 PUMP GP-FUEL INJECTION
 

#SEBP20430600
 

222-1148: PUMP GP-FUEL INJECTION

222-1148 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02212455 SEBP2043
2221148 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 7C-9255 [6] CLAMP  
3. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
4. 295-1295 [6] SEAL  
5. 9F-2247 [1] PLUG-PIPE  
6. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
7. 067-7006 [1] SEAL  
8. 101-3892 [1] CLIP  
9. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
10. 102-9904 [4] BOLT  
11. 102-9905 [1] CLIP  
12. 102-9906 [1] CLIP  
13. 102-9907 [1] CLIP  
14. 103-1027 [1] LINE AS (CYLINDER ONE)  
15. 103-1028 [1] LINE AS (CYLINDER TWO)  
16. 103-1026 [1] LINE AS (CYLINDER THREE)  
17. 103-1024 [1] LINE AS (CYLINDER FOUR)  
18. 103-1025 [1] LINE AS (CYLINDER FIVE)  
19. 103-1023 [1] LINE AS (CYLINDER SIX)  
20. 111-3422 M [1] NUT (M14X1.5-THD)  
21. 111-3423 [1] WASHER  
22. 114-2573 [1] SLEEVE  
25. 116-8572 [1] SEAL  
26. 247-9855 C [1] BOLT (M6X1X30-MM)  
27. 247-9844 C [5] BOLT (M6X1X16-MM)  
28. 126-2225 [1] GEAR  
29. 126-2243 [1] LINE-LEAKOFF  
30. 126-2245 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  126-2247 [1] HOLDER  
32. 126-2249 [1] NOZZLE  
35. 101-3877 [3] STUD (M8X1.25X37-MM)  
36. 203-6797 [1] SENSOR-SPEED (TIMING ADVANCE)  
37. 203-6798 [1] ADAPTER  
38. 241-4754 C [12] WASHER (6.35X9.75X1.55-MM THK)  
39. 210-6709 [1] COVER  
40. 216-4339 [1] WIRE-LOCK  
41. 222-1129 [1] PUMP GP-FUEL INJECTION  
   
  116-7068 F [1] GASKET  
  116-7073 F [1] SEAL  
  135-5016 F [1] CAP  
  135-5017 F [1] CAP  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP20430601
 

222-1392: PUMP GP-FUEL INJECTION

222-1392 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01781540 SEBP2043
2221392 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 7C-9255 [6] CLAMP  
3. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
4. 7W-0187 [6] SEAL  
5. 9S-5937 [1] LOCKNUT (10-32-THD)  
6. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
7. 067-6312 [4] BOLT  
8. 067-6980 [2] BOLT (M8X1.25-THD)  
9. 067-6999 [1] FERRULE  
10. 101-3877 [3] STUD (M8X1.25X37-MM)  
11. 101-3878 [1] GEAR (56-TEETH)  
12. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
13. 102-9903 [1] LINE-DRAIN  
14. 111-3422 M [1] NUT (M14X1.5-THD)  
15. 111-3423 [1] WASHER  
16. 124-3708 [2] CLIP  
17. 147-5513 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
18. 147-5514 [1] HOLDER  
19. 147-5515 [1] NOZZLE  
20. 162-9992 [1] CLIP  
21. 162-9993 [1] CLIP  
22. 162-9994 [1] CLIP  
23. 218-2857 [12] WASHER  
24. 221-0033 [1] LINE AS-FUEL  
25. 221-4021 [1] TUBE AS (CYLINDER ONE)  
26. 221-4022 [1] TUBE AS (CYLINDER TWO)  
27. 221-4023 [1] TUBE AS (CYLINDER THREE)  
28. 221-4024 [1] TUBE AS (CYLINDER FOUR)  
29. 221-4025 [1] TUBE AS (CYLINDER FIVE)  
30. 221-4026 [1] TUBE AS (CYLINDER SIX)  
31. 222-1390 [1] PUMP GP-FUEL INJECTION  
  7W-6249 [1] SOLENOID AS-SHUTOFF (12-VOLT)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20430602
 

222-1392: PUMP GP-FUEL INJECTION

222-1392 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02217187 SEBP2043
2221392 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 7C-9255 [6] CLAMP  
3. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
4. 295-1295 [6] SEAL  
5. 9S-5937 [1] LOCKNUT (10-32-THD)  
6. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
7. 243-5020 C [4] BOLT (M8X0.75X21.5-MM)  
8. 243-5386 C [2] BOLT (M8X0.75X28.5-MM)  
9. 067-6999 [1] FERRULE  
10. 101-3877 [3] STUD (M8X1.25X37-MM)  
11. 101-3878 [1] GEAR (56-TEETH)  
12. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
13. 102-9903 [1] LINE-DRAIN  
14. 111-3422 M [1] NUT (M14X1.5-THD)  
15. 111-3423 [1] WASHER  
16. 124-3708 [2] CLIP  
17. 147-5513 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
17A. 147-5514 [1] HOLDER  
17B. 147-5515 [1] NOZZLE  
20. 162-9992 [1] CLIP  
21. 162-9993 [1] CLIP  
22. 162-9994 [1] CLIP  
23. 243-5393 C [12] WASHER (8.35X12.45X1.55-MM THK)  
24. 229-9396 [1] LINE AS-FUEL  
24A. 067-6999 [1] FERRULE  
24B. 106-8835 [1] NUT  
25. 221-4021 [1] TUBE AS (CYLINDER ONE)  
26. 221-4022 [1] TUBE AS (CYLINDER TWO)  
27. 221-4023 [1] TUBE AS (CYLINDER THREE)  
28. 221-4024 [1] TUBE AS (CYLINDER FOUR)  
29. 221-4025 [1] TUBE AS (CYLINDER FIVE)  
30. 221-4026 [1] TUBE AS (CYLINDER SIX)  
31. 222-1390 [1] PUMP GP-FUEL INJECTION  
  7W-6249 [1] SOLENOID AS-SHUTOFF (12-VOLT)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20430603
 

223-9013: PUMP GP-FUEL INJECTION

223-9013 PUMP GP-FUEL INJECTION
PART OF 223-9014 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i01780727 SEBP2043
2239013 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-6219 [1] SOLENOID (12-VOLT)  
2. 193-0161 [1] CABLE AS-ADAPTER  
 

#SEBP20430604
 

223-9014: PUMP GP-FUEL INJECTION

223-9014 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01780725 SEBP2043
2239014 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 [1] LOCKWIRE  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [4] NUT (M8X1.25-THD)  
4. 7C-9255 [6] CLAMP  
5. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
6. 7W-0187 [6] SEAL  
7. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
8. 067-6312 [4] BOLT  
9. 067-6980 [2] BOLT (M8X1.25-THD)  
10. 067-6998 [1] NUT (3/8-24-THD)  
11. 067-6999 [1] FERRULE  
12. 067-7006 [1] SEAL  
13. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
14. 101-3877 [3] STUD (M8X1.25X37-MM)  
15. 101-3878 [1] GEAR (56-TEETH)  
16. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
17. 102-9903 [1] LINE-DRAIN  
18. 111-3422 M [1] NUT (M14X1.5-THD)  
19. 111-3423 [1] WASHER  
20. 121-4492 [1] SLEEVE  
21. 124-3708 [2] CLIP  
22. 136-7022 [1] BRACKET  
23. 162-9992 [1] CLIP  
24. 162-9993 [1] CLIP  
25. 162-9994 [1] CLIP  
26. 198-5804 [1] GASKET (FUEL PUMP)  
27. 218-2857 [12] WASHER  
28. 220-0495 [1] LINE AS-FUEL  
29. 223-9013 Y [1] PUMP GP-FUEL INJECTION  
30. 221-4021 [1] TUBE AS (CYLINDER ONE)  
31. 221-4022 [1] TUBE AS (CYLINDER TWO)  
32. 221-4023 [1] TUBE AS (CYLINDER THREE)  
33. 221-4024 [1] TUBE AS (CYLINDER FOUR)  
34. 221-4025 [1] TUBE AS (CYLINDER FIVE)  
35. 221-4026 [1] TUBE AS (CYLINDER SIX)  
36. 221-4027 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
37. 7W-2596 [1] HOLDER  
38. 220-0491 [1] NOZZLE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430605
 

223-9014: PUMP GP-FUEL INJECTION

223-9014 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02214274 SEBP2043
2239014 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 [1] LOCKWIRE  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [4] NUT (M8X1.25-THD)  
4. 7C-9255 [6] CLAMP  
5. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
6. 295-1295 [6] SEAL  
7. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
8. 243-5020 C [4] BOLT (M8X0.75X21.5-MM)  
9. 243-5386 C [2] BOLT (M8X0.75X28.5-MM)  
10. 067-6998 [1] NUT (3/8-24-THD)  
11. 067-6999 [1] FERRULE  
12. 067-7006 [1] SEAL  
13. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
14. 101-3877 [3] STUD (M8X1.25X37-MM)  
15. 101-3878 [1] GEAR (56-TEETH)  
16. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
17. 102-9903 [1] LINE-DRAIN  
18. 111-3422 M [1] NUT (M14X1.5-THD)  
19. 111-3423 [1] WASHER  
20. 121-4492 [1] SLEEVE  
21. 124-3708 [2] CLIP  
22. 136-7022 [1] BRACKET  
23. 162-9992 [1] CLIP  
24. 162-9993 [1] CLIP  
25. 162-9994 [1] CLIP  
26. 198-5804 [1] GASKET (FUEL PUMP)  
27. 243-5393 C [12] WASHER (8.35X12.45X1.55-MM THK)  
28. 220-0495 [1] LINE AS-FUEL  
29. 223-9013 Y [1] PUMP GP-FUEL INJECTION  
30. 221-4021 [1] TUBE AS (CYLINDER ONE)  
31. 221-4022 [1] TUBE AS (CYLINDER TWO)  
32. 221-4023 [1] TUBE AS (CYLINDER THREE)  
33. 221-4024 [1] TUBE AS (CYLINDER FOUR)  
34. 221-4025 [1] TUBE AS (CYLINDER FIVE)  
35. 221-4026 [1] TUBE AS (CYLINDER SIX)  
36. 221-4027 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
37. 7W-2596 [1] HOLDER  
38. 220-0491 [1] NOZZLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20430606
 

229-0075: PUMP GP-FUEL INJECTION

229-0075 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
ALSO AN ATTACHMENT
i01829390 SEBP2043
2290075 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 7C-9255 [6] CLAMP  
4. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
5. 7W-0187 [6] SEAL  
6. 033-7625 [1] ELBOW  
7. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
8. 365-3308 [1] NUT-COMPRESSION  
9. 067-6265 [1] FITTING-BRASS  
10. 067-7006 [1] SEAL  
11. 100-4458 M [1] BOLT (M8X1.25X14-MM)  
12. 101-3877 [3] STUD (M8X1.25X37-MM)  
13. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
14. 103-1027 [1] LINE AS (CYLINDER ONE)  
15. 103-1028 [1] LINE AS (CYLINDER TWO)  
16. 103-1026 [1] LINE AS (CYLINDER THREE)  
17. 103-1024 [1] LINE AS (CYLINDER FOUR)  
18. 103-1025 [1] LINE AS (CYLINDER FIVE)  
19. 103-1023 [1] LINE AS (CYLINDER SIX)  
20. 107-2347 [1] TUBE AS  
20A. 101-3985 [1] CLIP  
21. 107-2348 [1] CLIP  
22. 107-2349 [1] HOSE  
23. 114-2573 [1] SLEEVE  
24. 124-3713 [1] CONNECTION  
25. 124-3714 [5] BOLT  
26. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
27. 126-2243 [1] LINE-LEAKOFF  
28. 126-2245 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  126-2247 [1] HOLDER  
28A. 126-2249 [1] NOZZLE  
29. 154-6016 [1] GEAR-PUMP (56-TEETH)  
30. 162-0807 [1] LEAD  
31. 169-5326 [1] SWITCH-TEMPERATURE  
32. 203-6797 [1] SENSOR-SPEED (TIMING ADVANCE)  
33. 203-6798 [1] ADAPTER  
34. 204-7853 [12] WASHER  
35. 216-4339 [1] WIRE-LOCK  
36. 229-0070 [1] PUMP GP-FUEL INJECTION  
  M   METRIC PART
 

#SEBP20430607
 

229-0075: PUMP GP-FUEL INJECTION

229-0075 PUMP GP-FUEL INJECTION
S/N 1ML3382-UP
ALSO AN ATTACHMENT
i02214290 SEBP2043
2290075 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 7C-9255 [6] CLAMP  
4. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
5. 321-3109 [6] SEAL  
6. 033-7625 [1] ELBOW  
7. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
8. 365-3308 [1] NUT-COMPRESSION  
9. 067-6265 [1] FITTING-BRASS  
10. 067-7006 [1] SEAL  
11. 100-4458 M [1] BOLT (M8X1.25X14-MM)  
12. 101-3877 [3] STUD (M8X1.25X37-MM)  
13. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
14. 103-1027 [1] LINE AS (CYLINDER ONE)  
15. 103-1028 [1] LINE AS (CYLINDER TWO)  
16. 103-1026 [1] LINE AS (CYLINDER THREE)  
17. 103-1024 [1] LINE AS (CYLINDER FOUR)  
18. 103-1025 [1] LINE AS (CYLINDER FIVE)  
19. 103-1023 [1] LINE AS (CYLINDER SIX)  
20. 107-2347 [1] TUBE AS  
20A. 101-3985 [1] CLIP  
21. 107-2348 [1] CLIP  
22. 107-2349 [1] HOSE  
23. 114-2573 [1] SLEEVE  
24. 247-9855 C [1] BOLT (M6X1X30-MM)  
25. 247-9844 C [5] BOLT (M6X1X16-MM)  
26. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
27. 126-2243 [1] LINE-LEAKOFF  
28. 126-2245 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  126-2247 [1] HOLDER  
28A. 126-2249 [1] NOZZLE  
29. 154-6016 [1] GEAR-PUMP (56-TEETH)  
30. 162-0807 [1] LEAD  
31. 169-5326 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
32. 203-6797 [1] SENSOR-SPEED (TIMING ADVANCE)  
33. 203-6798 [1] ADAPTER  
34. 241-4754 C [12] WASHER (6.35X9.75X1.55-MM THK)  
35. 216-4339 [1] WIRE-LOCK  
36. 229-0070 [1] PUMP GP-FUEL INJECTION  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP20430608
 

233-8695: PUMP GP-FUEL INJECTION

233-8695 PUMP GP-FUEL INJECTION
PART OF 233-9150 PUMP GP-FUEL INJECTION
i02239677 SEBP2043
2338695 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-6219 [1] SOLENOID (12-VOLT)  
2. 193-0161 [1] CABLE AS-ADAPTER  
 

#SEBP20430609
 

233-9150: PUMP GP-FUEL INJECTION

233-9150 PUMP GP-FUEL INJECTION
S/N 1ML1-3381
i01959685 SEBP2043
2339150 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 [1] LOCKWIRE  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [4] NUT (M8X1.25-THD)  
4. 7C-9255 [6] CLAMP  
5. 7W-0186 [6] SPACER (21.6X26.8X3.2-MM THK)  
6. 7W-0187 [6] SEAL  
7. 033-7625 [1] ELBOW  
8. 033-7873 [6] WASHER (10.01X20.85X2.03-MM THK)  
9. 365-3308 [1] NUT-COMPRESSION  
10. 067-6265 [1] FITTING-BRASS  
11. 067-6300 [2] DAMPER  
12. 067-6301 [2] PLATE  
13. 067-6312 [3] BOLT  
14. 067-6317 [2] WASHER (0.4X0.566X0.04-IN THK)  
15. 067-6980 [3] BOLT (M8X1.25-THD)  
16. 067-6998 [2] NUT (3/8-24-THD)  
17. 067-6999 [2] FERRULE  
18. 067-7006 [1] SEAL  
19. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 101-3878 [1] GEAR (56-TEETH)  
22. 101-3895 M [12] BOLT (M8X1.25X35-MM)  
23. 101-3908 [1] BOLT  
24. 101-3909 [1] LOCKNUT (M5-THD)  
25. 102-9903 [1] LINE-DRAIN  
26. 111-3422 M [1] NUT (M14X1.5-THD)  
27. 111-3423 [1] WASHER  
28. 121-4492 [1] SLEEVE  
29. 124-3708 [1] CLIP  
30. 133-3807 [1] TUBE AS  
30A. 067-6999 [1] FERRULE  
30B. 101-3986 [1] CLIP  
30C. 106-8835 [1] NUT  
31. 136-7022 [1] BRACKET  
32. 147-5513 [6] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  147-5514 [1] HOLDER  
32A. 147-5515 [1] NOZZLE  
33. 162-9992 [1] CLIP  
34. 162-9993 [1] CLIP  
35. 162-9994 [1] CLIP  
36. 198-5804 [1] GASKET (FUEL PUMP)  
37. 218-2857 [12] WASHER  
38. 218-2858 [1] LINE AS-FUEL  
38A. 067-6999 [1] FERRULE  
38B. 106-8835 [1] NUT  
39. 218-2928 [1] LINE AS-FUEL  
39A. 067-6999 [1] FERRULE  
39B. 106-8835 [1] NUT  
40. 218-2945 [1] BOLT (BANJO)  
41. 220-2006 [1] TUBE AS (CYLINDER ONE)(CYLINDER NO 1)  
42. 220-2007 [1] TUBE AS (CYLINDER TWO)(CYLINDER NO 2)  
43. 220-2008 [1] TUBE AS (CYLINDER THREE)(CYLINDER NO 3)  
44. 220-2009 [1] TUBE AS (CYLINDER FOUR)(CYLINDER NO 4)  
45. 220-2010 [1] TUBE AS (CYLINDER FIVE)(CYLINDER NO 5)  
46. 220-2011 [1] TUBE AS (CYLINDER SIX)(CYLINDER NO 6)  
47. 233-8695 Y [1] PUMP GP-FUEL INJECTION  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
O-Ring Seal In Fuel Injection Pump Group Is A Serviceable Part{1251}
1994/04/18
3054 And 3056 Commercial Engine Fuel Injection Pump Service{1251}
1994/11/01
Fuel System Component Information {1254}
1996/01/17
Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/11/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/01
Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}
1999/01/01
Remanufactured Stanadyne Fuel Injection Pumps are Available for 3054 and 3056 Engines {1251}
2000/11/01
Support for Fuel Injection Pumps {1251}
2008/07/14
Delphi Fuel Injection Pumps on 3054, 3056, 3054B, 3054C, C3.3, C4.4 (MECH), and C7.1 (MECH)Engines {1251}
2013/07/30
Operation and Maintenance Manual
Fuel Injection Nozzles - Test/Exchange
3054 and 3056 Industrial and Generator Set Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines
Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines
Specifications
Fuel Injection Pump
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles
3054 and 3056 Industrial and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Timing - Check
3054 and 3056 Industrial and Generator Set Engines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles - Install
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Install
3054 and 3056 Industrial and Generator Set Engines
Service Magazine
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps {1251,1251,1000}
1998/08/17
Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3056 :

PUMP GP-FUEL INJECTION
222-1148 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-4029 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-4029 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-4019 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-2972 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-2972 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-0779 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
221-0779 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
222-1392 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
222-1392 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
223-9013 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
223-9014 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
223-9014 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
229-0075 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
229-0075 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
233-8695 PUMP GP-FUEL INJECTION

Truck sale:

CATERPILLAR 3056 1999
 
CATERPILLAR 3056 1999
- STATIONARY GENERATOR SETS
HEWITT EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.