AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E-8919 SHAFT GP-DRIVE S/N 7PK1-UP PART OF 8E-8072 POWER TRAIN AR D4HTSK III TRACK SKIDDER


POWER TRAIN
SHAFT GP
TORQUE CONVERTER GP
TRANSMISSION GP
SHAFT GP
VALVE GP-RELIEF
VALVE GP-SELECTOR & PRESS CONT

TRACK SKIDDER D4HTSK III TRACK SKIDDER 7PK
 D4H Series III Track-Type Skidder 7PK00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2044 D4HTSK III 7PK   (1992)

POWER TRAIN

SHAFT GP
SHAFT GP-DRIVE
8E-8919 SHAFT GP-DRIVE
SHAFT GP-STEERING CLUTCH INPUT
8G-1929 SHAFT GP-STEERING CLUTCH INPUT
UNIVERSAL JOINT GP
8E-8928 UNIVERSAL JOINT GP
 

#SEBP20440180
 

8E-8919: SHAFT GP-DRIVE

8E-8919 SHAFT GP-DRIVE
S/N 7PK1-UP
PART OF 8E-8072 POWER TRAIN AR
i00416716 SEBP2044
8E8919 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-8928 Y [1] UNIVERSAL JOINT GP  
2. 8E-8952 [1] YOKE AS  
  1A-2358 [1] PLUG-CUP  
3. 7F-6935 [1] RACE-BEARING INNER  
4. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
  3V-2431 [8] WASHER (10.2X16X2-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20440181
 

8G-1929: SHAFT GP-STEERING CLUTCH INPUT

8G-1929 SHAFT GP-STEERING CLUTCH INPUT
S/N 7PK1-UP
PART OF 8E-8072 POWER TRAIN AR
i00419339 SEBP2044
8G1929 SHAFT GP-STEERING CLUTCH INPUT Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-4047 [1] SHAFT  
2. 8G-4048 [1] SHAFT  
 

#SEBP20440182
 

1T-1947: TORQUE CONVERTER GP

1T-1947 TORQUE CONVERTER GP
S/N 7PK1-251
PART OF 8E-7859 TORQUE CONVERTER GP
i00554842 SEBP2044
1T1947 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1T-1987 [1] HOUSING-ROTATING  
2. 1T-0294 [1] RING-RETAINING  
3. 1T-0414 [6] BOLT-12 POINT HEAD (5/16-18X1-IN)  
4. 1T-1455 [1] GEAR AS-DRIVE (66 TEETH)  
5. 1T-0576 [1] BUSHING  
6. 1T-0043 [1] BALL BEARING  
7. 1T-0290 [2] PLATE-CLAMP  
8. 1T-1434 [1] SHAFT-OUTPUT  
9. 1K-6986 [1] RING-RETAINING  
10. 1T-1437 [1] CARRIER-STATOR  
11. 1T-0907 [1] SLEEVE-SPLIT  
12. 1T-1649 [4] PLATE-CLAMP  
13. 2H-3738 [8] BOLT (5/16-24X1-IN)  
14. 1T-0738 [24] WASHER (8.4X19X1.83-MM THK)  
15. 2B-2695 [24] BOLT (5/16-18X0.875-IN)  
16. 1T-0406 [1] WHEEL-IMPELLER  
17. 1T-0289 [4] PIN  
18. 1T-0068 [4] PIN-SPRING  
19. 0T-0102 [6] BOLT (3/8-16X0.625-IN)  
20. 1T-0537 [1] RETAINER  
21. 0S-1584 [1] BOLT (1/2-20X1.75-IN)  
22. 1T-1428 [1] RETAINER-BEARING  
23. 7M-5130 [1] PIN-SPRING  
24. 101-4897 [1] BALL BEARING  
25. 1T-0407 [1] WHEEL AS-GUIDE  
26. 1T-0020 [1] WHEEL-TURBINE  
27. 1T-0234 [1] RING-METAL SEAL  
28. 2A-3348 [1] DOWEL  
 

#SEBP20440183
 

1T-2026: TORQUE CONVERTER GP

1T-2026 TORQUE CONVERTER GP
S/N 7PK252-UP
PART OF 8E-7859 TORQUE CONVERTER GP
i00554843 SEBP2044
1T2026 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1T-1987 [1] HOUSING-ROTATING  
2. 1T-0294 [1] RING-RETAINING  
3. 1T-0414 [6] BOLT-12 POINT HEAD (5/16-18X1-IN)  
4. 1T-2024 [1] GEAR AS-DRIVE (66 TEETH)  
  1T-0576 [1] BUSHING  
  8B-1312 [2] DOWEL  
5. 1T-0234 [1] RING-METAL SEAL  
6. 1T-0043 [1] BALL BEARING  
7. 1T-0290 [2] PLATE-CLAMP  
8. 1T-1434 [1] SHAFT-OUTPUT  
9. 1K-6986 [1] RING-RETAINING  
10. 1T-2023 [1] CARRIER-STATOR  
11. 1T-0907 [1] SLEEVE-SPLIT  
12. 1T-1413 [2] PLATE-CLAMP  
13. 1B-0581 [14] BOLT (5/16-24X1.5-IN)  
14. 1T-0738 [24] WASHER (8.4X19X1.83-MM THK)  
15. 0S-1618 [24] BOLT (5/16-18X1-IN)  
16. 1T-1691 [1] IMPELLER-CONVERTER  
17. 1T-0289 [4] PIN  
18. 1T-0068 [4] PIN-SPRING  
19. 0T-0102 [6] BOLT (3/8-16X0.625-IN)  
20. 1T-0537 [1] RETAINER  
21. 0S-1584 [1] BOLT (1/2-20X1.75-IN)  
22. 1T-1428 [1] RETAINER-BEARING  
23. 7M-5130 [1] PIN-SPRING  
24. 101-4897 [1] BALL BEARING  
25. 1T-1981 [1] STATOR AS-CONVERTER  
26. 1T-0020 [1] WHEEL-TURBINE  
27. 2A-3348 [1] DOWEL  
28. 1T-1673 [1] PLATE-SUPPORT  
 

#SEBP20440184
 

8E-7859: TORQUE CONVERTER GP

8E-7859 TORQUE CONVERTER GP
S/N 7PK1-251
PART OF 8E-8072 POWER TRAIN AR
i00712918 SEBP2044
8E7859 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0484 [1] BOLT (1/2-20X2.25-IN)  
2. 7G-3496 [1] RETAINER  
3. 5P-5846 [1] SEAL-O-RING  
4. 7G-3495 [1] YOKE  
5. 1D-4326 [1] SEAL-LIP TYPE  
6. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
7. 5M-2894 [36] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 1A-2029 [28] BOLT (3/8-16X1.125-IN)  
9. 5P-9806 [1] SEAL-O-RING  
10. 2H-3934 [1] SEAL-O-RING  
11. 8F-9516 [1] SEAL-O-RING  
12. 1T-1947 Y [1] TORQUE CONVERTER GP  
13. 5F-1678 [1] SEAL-O-RING  
14. 7G-0585 [1] COVER-TORQUE CONVERTER  
15. 7J-0204 [2] SEAL-O-RING  
16. 1N-5999 [2] PLUG-O-RING  
17. 6L-3616 [2] CONNECTOR  
18. 8P-4894 [2] TUBE AS  
19. 7G-3498 [2] GEAR AS-PUMP DRIVE (66-TEETH)  
    (EACH INCLUDES)
  7G-0587 [1] PLUG-CUP  
20. 5P-7068 [2] BEARING AS-ROLLER  
21. 8P-8701 [2] WASHER-THRUST  
22. 2M-4287 [2] RING-SNAP  
23. 4K-6804 [2] SEAL-O-RING  
24. 8G-8240 [2] ADAPTER  
25. 1U-8846 B [1] SEALANT-GASKET  
26. 1P-5285 [1] COVER  
27. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
28. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP20440185
 

8E-7859: TORQUE CONVERTER GP

8E-7859 TORQUE CONVERTER GP
S/N 7PK252-UP
PART OF 8E-8072 POWER TRAIN AR
i00712919 SEBP2044
8E7859 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0484 [1] BOLT (1/2-20X2.25-IN)  
2. 7G-3496 [1] RETAINER  
3. 5P-5846 [1] SEAL-O-RING  
4. 7G-3495 [1] YOKE  
5. 9X-7541 [1] SEAL-LIP TYPE  
6. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
7. 5M-2894 [36] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 1A-2029 [28] BOLT (3/8-16X1.125-IN)  
9. 5P-9806 [1] SEAL-O-RING  
10. 2H-3934 [1] SEAL-O-RING  
11. 8F-9516 [1] SEAL-O-RING  
12. 1T-2026 CY [1] TORQUE CONVERTER GP  
13. 5F-1678 [1] SEAL-O-RING  
14. 7G-0585 [1] COVER-TORQUE CONVERTER  
15. 7J-0204 [2] SEAL-O-RING  
16. 1N-5999 [2] PLUG-O-RING  
17. 6L-3616 [2] CONNECTOR  
18. 8P-4894 [2] TUBE AS  
19. 7G-3498 [2] GEAR AS-PUMP DRIVE (66-TEETH)  
    (EACH INCLUDES)
  7G-0587 [1] PLUG-CUP  
20. 5P-7068 [2] BEARING AS-ROLLER  
21. 8P-8701 [2] WASHER-THRUST  
22. 2M-4287 [2] RING-SNAP  
23. 4K-6804 [2] SEAL-O-RING  
24. 8G-8240 [2] ADAPTER  
25. 1U-8846 B [1] SEALANT-GASKET  
26. 1P-5285 [1] COVER  
27. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
28. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20440186
 

8E-7893: TRANSMISSION AR

8E-7893 TRANSMISSION AR
S/N 3CX1-UP
POWER SHIFT
PART OF 8E-8072 POWER TRAIN AR
i00415935 SEBP2044
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8P-3046 Y [1] CONTROL GP-TRANSMISSION HYD  
  8E-7895 Y [1] GEAR GP-BEVEL & TRANSFER  
  8E-7894 Y [1] PLANETARY GP-TRANSMISSION  
   
    AVAILABLE GASKET KIT(S):
  102-8398 [1] KIT-GASKET (HYDRAULIC CONTROL)  
  103-9206 [1] KIT-GASKET (PLANETARY)  
  103-9207 [1] KIT-GASKET (POWER TRAIN OIL LINES)  
  103-9209 [1] KIT-GASKET (TORQUE CONVERTER OR DIVIDER)  
  103-9210 [1] KIT-GASKET (TRANSMISSION FILTER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20440187
 

8E-8928: UNIVERSAL JOINT GP

8E-8928 UNIVERSAL JOINT GP
S/N 7PK1-UP
PART OF 8E-8919 SHAFT GP-DRIVE
i00416732 SEBP2044
8E8928 UNIVERSAL JOINT GP Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TUBE-UNIVERSAL JOINT  
2. 5T-1362 [2] SPIDER & BEARING AS  
3. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
  3V-2431 [8] WASHER (10.2X16X2-MM THK)  
 

#SEBP20440188
 

2P-3675: VALVE GP-RELIEF

2P-3675 VALVE GP-RELIEF -TORQUE CONVERTER OUTLET
S/N 7PK1-UP
PART OF 8G-2448 LINES GP-POWER TRAIN OIL
i00158001 SEBP2044
2P3675 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-1384 [1] SPOOL AS-RELIEF  
  2S-1385 [1] SPOOL-RELIEF VALVE  
2. 8M-2538 [1] POPPET  
3. 5M-9548 [1] SPRING  
4. 8M-4409 [1] RETAINER  
5. 7M-8592 [1] RING-RETAINING  
6. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
9. 0S-1594 [4] BOLT (3/8-16X1-IN)  
  3B-4506 [4] LOCKWASHER  
10. 4M-8239 [2] COVER  
11. 2S-1382 [1] SPRING  
12. 061-7540 C [1] SEAL-O-RING  
13. 6V-4365 C [1] SEAL-O-RING  
14. 4M-1751 B [1] SPACER (15.09X0.4-MM THK)  
  5S-7001 B [3] SPACER (7.54X14.15X0.9-MM THK)  
15. 8M-4986 C [2] SEAL-O-RING  
16. 141-1546 [1] PLUG-PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20440189
 

8P-3044: VALVE GP-SELECTOR & PRESS CONT

8P-3044 VALVE GP-SELECTOR & PRESS CONT -TRANSMISSION
S/N 3CX1-UP
PART OF 8P-3045 VALVE GP-TRANSMISSION CONTROL
i00417785 SEBP2044
8P3044 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-5567 C [1] SPOOL AS-RELIEF  
1A. 4M-2381 [1] SPRING  
1B. 4B-9880 [1] BALL  
1C. 3D-8317 [1] RING-RETAINING  
1D. 8M-1013 [1] RETAINER  
2. 5M-9623 B [1] SHIM (0.9-MM THK)  
3. 9P-3041 [1] SPRING (INNER)  
4. 7G-4842 [1] SPRING (OUTER)  
5. 6P-4971 [2] STOP  
6. 1J-5353 [2] PIN-SPRING  
7. 9G-5301 C [1] PISTON-LOAD  
8. 2H-2995 [1] SETSCREW (10-24X0.438-IN)  
9. 5M-9622 B [1] SHIM (1.6-MM THK)  
10. 6P-4938 [1] COVER  
11. 8T-7258 C [2] SEAL-O-RING  
12. 238-5508 C [1] PLUG AS-ORIFICE  
  8L-2779 [1] SEAL-O-RING  
  215-7183 [1] ORIFICE-SCREEN  
13. 2B-2695 [3] BOLT (5/16-18X0.875-IN)  
14. 6P-9785 [1] SPRING  
15. 3P-8485 [1] RING-RETAINING  
16. 6P-9783 [1] SPRING (INNER)  
17. 6P-9784 [1] SPRING (OUTER)  
18. 7G-9563 [1] SPOOL  
19. 6P-9786 [1] RETAINER  
20. 2S-4872 [1] STOP  
21. 2A-3746 [2] PLUG-CUP  
22. 9P-6219 [1] SPOOL-SELECTOR  
23. 3T-4215 C [1] SLUG  
24. 3T-3494 C [1] SPOOL-RATIO  
25. 7S-4607 [4] DETENT AS  
26. 8P-6321 [1] DOWEL  
27. 9W-5568 C [1] SLUG  
28. 6P-4940 [1] STOP  
29. 6T-4254 [1] SPOOL-SPEED SELECTOR  
30. 2S-0696 [2] DOWEL  
31. 5M-9624 B [3] SHIM (0.25-MM THK)  
32. 6T-0401 [1] BODY AS-SELECTOR VALVE  
32A. 3T-8269 [1] PLUG-ORIFICE  
33. 1P-8116 [4] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog D4HTSK III :

SEGMENT GP-SPROCKET
7G-0841 SEGMENT GP-SPROCKET
SEGMENT GP-SPROCKET
7G-0841 SEGMENT GP-SPROCKET
PUMP GP-GEAR
3T-7898 PUMP GP-GEAR
PUMP GP-GEAR
3T-7897 PUMP GP-GEAR
8E-8072 POWER TRAIN AR
PLANETARY GP-TRANSMISSION
8E-7894 PLANETARY GP-TRANSMISSION
MOUNTING GP-TRANSMISSION
3T-9633 MOUNTING GP-TRANSMISSION
LINES GP-POWER TRAIN OIL
8G-2448 LINES GP-POWER TRAIN OIL
SHAFT GP-STEERING CLUTCH INPUT
8G-1929 SHAFT GP-STEERING CLUTCH INPUT
TORQUE CONVERTER GP
1T-1947 TORQUE CONVERTER GP
TORQUE CONVERTER GP
1T-2026 TORQUE CONVERTER GP
TORQUE CONVERTER GP
8E-7859 TORQUE CONVERTER GP
TORQUE CONVERTER GP
8E-7859 TORQUE CONVERTER GP
8E-7893 TRANSMISSION AR
UNIVERSAL JOINT GP
8E-8928 UNIVERSAL JOINT GP
VALVE GP-RELIEF
2P-3675 VALVE GP-RELIEF

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.