AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G-9308 EDGE GP-BIT & CUTTING -LEVEL CUT S/N 7EH1-UP PART OF 6Y-6089 BLADE GP-ANGLING AN ATTACHMENT D4HTSK III


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP
GRAPPLE GP

TRACK SKIDDER D4HTSK III TRACK SKIDDER 7PK
 D4H Series III Track-Type Skidder 7PK00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2044 D4HTSK III 7PK   (1992)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
140-6787 BIT-END
140-6788 BIT-END
EDGE GP-BIT & CUTTING
3G-9308 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2814 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2815 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2816 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2817 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2818 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2819 EDGE GP-BIT & CUTTING
 

#SEBP20440480
 

3G-9308: EDGE GP-BIT & CUTTING

3G-9308 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N 7EH1-UP
PART OF 6Y-6089 BLADE GP-ANGLING
AN ATTACHMENT
i00365773 SEBP2044
3G9308 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-9306 [2] EDGE-CUTTING  
2. 8E-9378 [1] BIT-END (LH)  
3. 8E-9379 [1] BIT-END (RH)  
4. 2J-3506 [20] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [20] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [20] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20440481
 

507-2814: EDGE GP-BIT & CUTTING

507-2814 EDGE GP-BIT & CUTTING
S/N 7PK1-UP
19-MM. LEVEL CUT
FIELD INSTALLATION
i07393310 SEBP2044
5072814 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 323-4279 [1] BIT-END (RH)  
3. 323-4280 [1] BIT-END (LH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20440482
 

507-2815: EDGE GP-BIT & CUTTING

507-2815 EDGE GP-BIT & CUTTING
S/N 7PK1-UP
16-MM. LEVEL CUT, REVERSIBLE
FIELD INSTALLATION
i07394781 SEBP2044
5072815 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 8E-9377 [2] EDGE-CUTTING  
3. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20440483
 

507-2816: EDGE GP-BIT & CUTTING

507-2816 EDGE GP-BIT & CUTTING
S/N 7PK1-UP
19-MM. GENERAL DUTY
FIELD INSTALLATION
i07393472 SEBP2044
5072816 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 140-6787 [1] BIT-END (RH)  
3. 140-6788 [1] BIT-END (LH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20440484
 

507-2817: EDGE GP-BIT & CUTTING

507-2817 EDGE GP-BIT & CUTTING
S/N 7PK1-UP
19-MM. EXTENDED CUT
FIELD INSTALLATION
i07393291 SEBP2044
5072817 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5407 [1] BIT-END (RH)  
2. 4T-5408 [1] BIT-END (LH)  
3. 4T-6659 [2] EDGE-CUTTING  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20440485
 

507-2818: EDGE GP-BIT & CUTTING

507-2818 EDGE GP-BIT & CUTTING
S/N 7PK1-UP
19-MM. ABRASION RESISTANT MATERIAL
FIELD INSTALLATION
i07393282 SEBP2044
5072818 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 473-9970 [1] BIT-END (LH)  
3. 473-9971 [1] BIT-END (RH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20440486
 

507-2819: EDGE GP-BIT & CUTTING

507-2819 EDGE GP-BIT & CUTTING
S/N 7PK1-UP
16-MM. REVERSIBLE, LEVEL CUT
FIELD INSTALLATION
i07393473 SEBP2044
5072819 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 3G-9306 [2] EDGE-CUTTING  
3. 2J-3506 [20] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [20] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [20] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20440487
 

6T-1531: FAIRLEAD GP-WINCH

6T-1531 FAIRLEAD GP-WINCH
S/N 7PK1-UP
AN ATTACHMENT
i00401980 SEBP2044
6T1531 FAIRLEAD GP-WINCH Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-7287 [2] SHAFT  
2. 3B-8489 C [6] FITTING-GREASE (1/8-27 PTF)  
3. 0S-0509 C [6] BOLT (3/8-16X0.75-IN)  
4. 6T-7286 C [3] PLATE  
5. 9G-7735 [1] FRAME AS  
6. 6T-7288 C [1] SHAFT  
7. 6D-7479 C [6] WASHER (1.531X2.38X0.105-IN THK)  
8. 6V-3204 C [6] SEAL-RING  
  6F-0711 C [6] SEAL-O-RING  
9. 3T-0390 C [1] ROLLER AS  
10. 3T-0389 [2] ROLLER AS  
11. 9G-7755 [2] PIN  
12. 9G-7756 [2] SUPPORT  
13. 3B-4647 [2] PIN-COTTER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20440488
 

9N-4824: FRAME GP-GRAPPLE

9N-4824 FRAME GP-GRAPPLE
S/N 7PK1-UP
PART OF 6I-8949, 9U-8329 GRAPPLE AR
AN ATTACHMENT
i00437806 SEBP2044
9N4824 FRAME GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-9205 [4] SEAL-LIP TYPE  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 1U-0563 [2] BEARING  
4. 5P-3882 [28] BOLT-LOCKING (3/4-10X2.25-IN)  
5. 8T-4994 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 5P-3882 B [6] BOLT-LOCKING (3/4-10X2.25-IN)  
  8T-4994 B [6] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 8E-0173 [1] SUBFRAME AS  
8. 9V-0321 [2] BLOCK  
9. 3T-6090 [2] BOSS  
10. 2J-7730 [2] CLAMP-HOSE  
11. 2B-2994 [2] DOWEL  
12. 8E-0175 [4] PIN AS  
13. 7X-0343 [6] BOLT (5/8-11X1.25-IN)  
14. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
15. 8E-0184 [2] PIN AS  
16. 8E-8058 [1] ARCH AS  
  3J-5169 [4] NUT-WELD (5/8-11-THD)  
  7J-7778 [4] LUG (1/2-13-THD)  
  7T-1099 [6] LINK  
17. 8V-6808 [2] BLOCK  
18. 2J-7730 [2] CLAMP-HOSE  
19. 8F-9836 [6] BOSS (3/8-16-THD)  
20. 8T-9393 [4] BOLT (5/8-11X1.5-IN)  
21. 8E-0180 [1] PLATE AS  
22. 6S-7119 [4] SPACER (50.8X63.5X15-MM THK)  
23. 8E-0181 [2] ROLLER  
24. 8M-3842 [4] BALL BEARING  
25. 7X-0346 [8] BOLT (5/8-11X2-IN)  
  7X-0448 [8] NUT (5/8-11-THD)  
26. 8E-0183 [1] FAIRLEAD AS  
27. 8V-3533 [4] SPACER  
28. 8E-0182 [2] SHAFT AS  
29. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
30. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8E-0176 [2] SPACER  
32. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
33. 4L-6454 [2] BOLT (3/8-16X1-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
34. 8E-0177 [2] PLATE  
35. 2V-8314 B [2] SHIM PACK (INCLUDES 9-SHIMS)  
36. 5P-1610 [2] BALL BEARING  
37. 8E-0179 [1] SHAFT  
38. 8E-0178 [1] ROLLER  
  B   USE AS REQUIRED
 

#SEBP20440489
 

9N-4947: FRAME GP-GRAPPLE

9N-4947 FRAME GP-GRAPPLE
S/N 7PK1-UP
PART OF 9N-4872 GRAPPLE AR
AN ATTACHMENT
i00437983 SEBP2044
9N4947 FRAME GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your D4HTSK III TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-9205 [4] SEAL-LIP TYPE  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 1U-0563 [2] BEARING  
4. 5P-3882 [28] BOLT-LOCKING (3/4-10X2.25-IN)  
5. 8T-4994 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 8T-9393 [4] BOLT (5/8-11X1.5-IN)  
7. 8E-0173 [1] SUBFRAME AS  
8. 9V-0321 [2] BLOCK  
9. 3T-6090 [2] BOSS (20.0MM DIA)  
10. 2J-7730 [2] CLAMP-HOSE  
11. 7T-1099 [3] LINK  
12. 8S-6004 [2] BOSS (1.25MM DIA)  
13. 7X-0343 [6] BOLT (5/8-11X1.25-IN)  
14. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
15. 8E-0184 [2] PIN AS  
16. 8E-8058 [1] ARCH AS  
  7J-7778 [4] LUG (1/2-13-THD)  
  7T-1099 [6] LINK  
17. 8V-6808 [2] BLOCK  
18. 2J-7730 [2] CLAMP-HOSE  
19. 8F-9836 [6] BOSS (3/8-16-THD)  
20. 3J-5169 [4] NUT-WELD (5/8-11-THD)  
21. 8E-0180 [1] PLATE AS  
22. 6S-7119 [4] SPACER (50.8X63.5X15-MM THK)  
23. 9N-4975 [1] PLATE AS  
24. 9N-4976 [1] PLATE  
25. 7X-0346 [8] BOLT (5/8-11X2-IN)  
  7X-0448 [8] NUT (5/8-11-THD)  
26. 2B-2994 [2] DOWEL  
27. 8E-0175 [4] PIN AS  
 

Information:

Special Instruction
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog D4HTSK III :

CROSSHEAD GP-GRAPPLE
8C-9310 CROSSHEAD GP-GRAPPLE
CROSSHEAD GP-GRAPPLE
111-3395 CROSSHEAD GP-GRAPPLE
CROSSHEAD GP-GRAPPLE
111-3394 CROSSHEAD GP-GRAPPLE
CROSSHEAD GP-GRAPPLE
103-0247 CROSSHEAD GP-GRAPPLE
COVER GP-SHIPPING
7G-4789 COVER GP-SHIPPING
CONVERSION GP-WINCH
6Y-7225 CONVERSION GP-WINCH
118-0024 CONVERSION AR-WINCH
CONTROL GP-WINCH
9U-8356 CONTROL GP-WINCH
EDGE GP-BIT & CUTTING
507-2814 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2815 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2816 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2817 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2818 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2819 EDGE GP-BIT & CUTTING
FAIRLEAD GP-WINCH
6T-1531 FAIRLEAD GP-WINCH
FRAME GP-GRAPPLE
9N-4824 FRAME GP-GRAPPLE

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.