AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3176B Truck Engine CARB-Certified - ATAAC 9CK00001-UP ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



TRUCK ENGINE 3176B TRUCK ENGINE 9CK
 3176B Truck Engine CARB-Certified - ATAAC 9CK00001-UP SEBP2047 3176B 9CK   (1992)

Parts group 3176B:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
MOUNTING GP-ALTERNATOR
103-0743 MOUNTING GP-ALTERNATOR
103-0743 MOUNTING GP-ALTERNATOR
S/N 9CK1-27608; 9CK27670-31094; 9CK32684-32765
FOR USE WITH @@@@@100-6944@@@@@
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
104-7888 MOUNTING GP-ALTERNATOR
104-7888 MOUNTING GP-ALTERNATOR
S/N 9CK1-27611; 9CK27628-32685
FOR USE WITH @@@@@100-6944@@@@@
ALSO AN ATTACHMENT
ALTERNATOR GP-CHARGING
121-4134 ALTERNATOR GP-CHARGING
121-4134 ALTERNATOR GP-CHARGING
S/N 9CK1-32765
12-VOLT, 115-AMPERE
PART OF 9Y-7146 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT FOR @@@@@ 9X-6796@@@@@
AN ATTACHMENT
ALTERNATOR GP-CHARGING
8C-6163 ALTERNATOR GP-CHARGING
8C-6163 ALTERNATOR GP-CHARGING
S/N 9CK1-32765
12-VOLT, 105-AMPERE
AN ATTACHMENT
ALTERNATOR GP-CHARGING
9X-6796 ALTERNATOR GP-CHARGING
9X-6796 ALTERNATOR GP-CHARGING
S/N 9CK1-32765
12 VOLT, 115 AMPERE
PART OF 9Y-7146 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@121-4134@@@@@
AN ATTACHMENT
9Y-7146 ALTERNATOR GP-CHARGING
9Y-7146 ALTERNATOR GP-CHARGING
S/N 9CK1-32765
12 VOLT, 115 AMPERE
AN ATTACHMENT
CONTROL GP-ELECTRONIC
CONTROL GP-ELECTRONIC
120-8954 CONTROL GP-ELECTRONIC
120-8954 CONTROL GP-ELECTRONIC
S/N 9CK1-32765
FIELD REPLACEMENT FOR @@@@@119-3671@@@@@
FIELD INSTALLATION
ELECTRONICS GP-ENGINE
CONTROL & MTG GP-ENGINE ELEK
117-2665 CONTROL & MTG GP-ENGINE ELEK
117-2665 CONTROL & MTG GP-ENGINE ELEK
S/N 9CK16243-28978
CONTROL & MTG GP-ENGINE ELEK
117-2752 CONTROL & MTG GP-ENGINE ELEK
117-2752 CONTROL & MTG GP-ENGINE ELEK
S/N 9CK28979-28979
CONTROL & MTG GP-ENGINE ELEK
124-2673 CONTROL & MTG GP-ENGINE ELEK
124-2673 CONTROL & MTG GP-ENGINE ELEK
S/N 9CK26944-32765
CONTROL & MTG GP-ENGINE ELEK
4P-9538 CONTROL & MTG GP-ENGINE ELEK
4P-9538 CONTROL & MTG GP-ENGINE ELEK
S/N 9CK1-32669
CONTROL GP-ENG RATINGS ELEK
114-5549 CONTROL GP-ENG RATINGS ELEK
114-5549 CONTROL GP-ENG RATINGS ELEK
S/N 9CK6898-32669
255 KW (342 HP)
119-5942 CONTROL GP-ENG RATINGS ELEK
119-5942 CONTROL GP-ENG RATINGS ELEK
S/N 9CK26947-29743
261 KW (350 HP)
FIELD REPLACEMENT ORDER @@@@@119-5945@@@@@
CONTROL GP-ENG RATINGS ELEK
119-5945 CONTROL GP-ENG RATINGS ELEK
119-5945 CONTROL GP-ENG RATINGS ELEK
S/N 9CK1-32765
261 KW (350 HP)
FIELD REPLACEMENT FOR @@@@@119-5942@@@@@
FIELD INSTALLATION
119-5946 CONTROL GP-ENG RATINGS ELEK
119-5946 CONTROL GP-ENG RATINGS ELEK
S/N 9CK26944-31127
242 KW (324 HP)
FIELD REPLACEMENT ORDER @@@@@119-5949@@@@@
CONTROL GP-ENG RATINGS ELEK
119-5949 CONTROL GP-ENG RATINGS ELEK
119-5949 CONTROL GP-ENG RATINGS ELEK
S/N 9CK1-32765
242 KW (324 HP)
FIELD REPLACEMENT FOR @@@@@119-5946@@@@@
FIELD INSTALLATION
119-5950 CONTROL GP-ENG RATINGS ELEK
119-5950 CONTROL GP-ENG RATINGS ELEK
S/N 9CK27285-31114
272 KW (364 HP)
FIELD REPLACEMENT ORDER @@@@@119-5953@@@@@
CONTROL GP-ENG RATINGS ELEK
119-5953 CONTROL GP-ENG RATINGS ELEK
119-5953 CONTROL GP-ENG RATINGS ELEK
S/N 9CK27285-31114
272 KW (364 HP)
FIELD REPLACEMENT FOR @@@@@119-5950@@@@@
155-8716 CONTROL GP-ENG RATINGS ELEK
155-8716 CONTROL GP-ENG RATINGS ELEK
S/N 9CK1-18308
FIELD INSTALLATION
CONTROL GP-ENGINE ELECTRONIC
115-3055 CONTROL GP-ENGINE ELECTRONIC
115-3055 CONTROL GP-ENGINE ELECTRONIC
S/N 9CK26944-UP
PART OF 124-2673 CONTROL & MTG GP-ENGINE ELEK
CONTROL GP-ENGINE ELECTRONIC
119-3671 CONTROL GP-ENGINE ELECTRONIC
119-3671 CONTROL GP-ENGINE ELECTRONIC
S/N 9CK16243-28978
FIELD REPLACEMENT ORDER @@@@@120-8954@@@@@
CONTROL GP-VEH SPD FIL ELEK
117-7213 CONTROL GP-VEH SPD FIL ELEK
117-7213 CONTROL GP-VEH SPD FIL ELEK
S/N 9CK1-32765
FIELD INSTALLATION
SENSOR GP
CONTROL GP-ELECTRONIC
120-8954 CONTROL GP-ELECTRONIC
120-8954 CONTROL GP-ELECTRONIC
S/N 9CK1-32765
FIELD REPLACEMENT FOR @@@@@119-3671@@@@@
FIELD INSTALLATION
133-0659 KIT-TEMPERATURE SENSOR
133-0659 KIT-TEMPERATURE SENSOR
S/N 9CK1-32765
OUTSIDE AIR, PROVIDES REDUCED IDLE TIME DURING MILD WEATHER
FIELD INSTALLATION
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK1-645
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK646-6262
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK6263-25906
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK25907-25907
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK25908-26788
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK26789-28933
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK28934-31866
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK31867-32106
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK32107-32764
SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
4P-9545 SENSOR GP-ENGINE
S/N 9CK32765-32765
SENSOR GP-POSITION
121-0231 SENSOR GP-POSITION
121-0231 SENSOR GP-POSITION
S/N 9CK1-32765
THROTTLE
AN ATTACHMENT
SENSOR GP-POSITION
176-1602 SENSOR GP-POSITION
176-1602 SENSOR GP-POSITION
ROTARY, PROVIDES PEDAL MOUNTED CONTROL
FIELD REPLACEMENT FOR @@@@@ 3E-7700@@@@@
SENSOR GP-POSITION
3E-7700 SENSOR GP-POSITION
3E-7700 SENSOR GP-POSITION
S/N 9CK1-32765
PROVIDES PEDAL MOUNTED CONTROL
FIELD REPLACEMENT ORDER @@@@@176-1602@@@@@
AN ATTACHMENT
SENSOR GP-PRESSURE
161-9927 SENSOR GP-PRESSURE
161-9927 SENSOR GP-PRESSURE
S/N 9CK32765-UP
PART OF 4P-9545 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
161-9930 SENSOR GP-PRESSURE
161-9930 SENSOR GP-PRESSURE
S/N 9CK32765-UP
PART OF 4P-9545 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
S/N 9CK32765-32765
PART OF 4P-9545 SENSOR GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@249-5293@@@@@, 274-6717 SENSOR-PRESSURE
SENSOR GP-SPEED
127-1008 SENSOR GP-SPEED
127-1008 SENSOR GP-SPEED
S/N 9CK25907-25907; 9CK26788-28933
PART OF 4P-9545 SENSOR GP-ENGINE
FIELD REPLACEMENT ORDER @@@@@129-6628@@@@@
FIELD REPLACEMENT FOR @@@@@ 3E-6410@@@@@
SENSOR GP-SPEED
129-6628 SENSOR GP-SPEED
129-6628 SENSOR GP-SPEED
S/N 9CK25908-27186; 9CK28934-UP
PART OF 4P-9545 SENSOR GP-ENGINE
FIELD REPLACEMENT ORDER @@@@@265-9033@@@@@
FIELD REPLACEMENT FOR @@@@@127-1008@@@@@
SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
CAMSHAFT POSITION
FIELD REPLACEMENT FOR @@@@@129-6628@@@@@
SENSOR GP-SPEED
3E-6410 SENSOR GP-SPEED
3E-6410 SENSOR GP-SPEED
PART OF 4P-9545 SENSOR GP-ENGINE
FIELD REPLACEMENT ORDER @@@@@127-1008@@@@@
SENSOR GP-TEMPERATURE
106-0735 SENSOR GP-TEMPERATURE
106-0735 SENSOR GP-TEMPERATURE
S/N 9CK1-32765
PROVIDES SENSORS FOR MONITORING MARINE TRANSMISSION OIL TEMP AND PRESSURE, 3 PIN ACTIVE
PART OF 133-0659 KIT-TEMPERATURE SENSOR
STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
102-5836 STARTING MOTOR GP-ELECTRIC
102-5836 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-32765
24-VOLT. STARTING AID RECOMMENDED BELOW 0-DEG CELSIUS (32-DEG F)
FOR USE WITH 24-VOLT SYSTEM AND LH STARTER MOUNT FLYWHEEL HOUSING, REQUIRES: SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
102-5836 STARTING MOTOR GP-ELECTRIC
102-5836 STARTING MOTOR GP-ELECTRIC
S/N 9CK20075-28616
24-VOLT. STARTING AID RECOMMENDED BELOW 0-DEG CELSIUS (32-DEG F)
FOR USE WITH 24-VOLT SYSTEM AND LH STARTER MOUNT FLYWHEEL HOUSING, REQUIRES: SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
S/N 9CK20075-28616
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
24-VOLT
FIELD REPLACEMENT FOR @@@@@ 6V-5539@@@@@, @@@@@ 6V-5582@@@@@
STARTING MOTOR GP-ELECTRIC
3E-7863 STARTING MOTOR GP-ELECTRIC
3E-7863 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-32765
12 VOLT
FIELD REPLACEMENT FOR @@@@@ 8C-3592@@@@@
6N-1889 STARTING MOTOR GP-ELECTRIC
6N-1889 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-32765
24-VOLT
PART OF 102-5836 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT
6V-5539 STARTING MOTOR GP-ELECTRIC
6V-5539 STARTING MOTOR GP-ELECTRIC
S/N 9CK20075-28616
24-VOLT
PART OF 102-5836 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
FIELD REPLACEMENT FOR @@@@@ 6N-1889@@@@@, @@@@@ 8C-3644@@@@@, @@@@@ 7T-0794@@@@@, @@@@@ 9X-4452@@@@@, @@@@@ 6V-5540@@@@@
ALSO AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
6V-5540 STARTING MOTOR GP-ELECTRIC
6V-5540 STARTING MOTOR GP-ELECTRIC
S/N 9CK20075-28616
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
ALSO AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
6V-5582 STARTING MOTOR GP-ELECTRIC
6V-5582 STARTING MOTOR GP-ELECTRIC
S/N 9CK20075-28616
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
ALSO AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
7T-0794 STARTING MOTOR GP-ELECTRIC
7T-0794 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-32765
24-VOLT
PART OF 6N-1889 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
8C-3592 STARTING MOTOR GP-ELECTRIC
8C-3592 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-1561
PART OF 9Y-7129 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 3E-7863@@@@@, @@@@@ 8C-3593@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
8C-3592 STARTING MOTOR GP-ELECTRIC
8C-3592 STARTING MOTOR GP-ELECTRIC
S/N 9CK1562-32765
PART OF 9Y-7129 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 3E-7863@@@@@, @@@@@ 8C-3593@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
8C-3593 STARTING MOTOR GP-ELECTRIC
8C-3593 STARTING MOTOR GP-ELECTRIC
12 VOLT
FIELD REPLACEMENT FOR @@@@@ 8C-3592@@@@@
STARTING MOTOR GP-ELECTRIC
8C-3644 STARTING MOTOR GP-ELECTRIC
8C-3644 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-32765
24-VOLT
PART OF 6N-1889 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
9X-4452 STARTING MOTOR GP-ELECTRIC
9X-4452 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-32765
24-VOLT
PART OF 6N-1889 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT
9Y-7129 STARTING MOTOR GP-ELECTRIC
9Y-7129 STARTING MOTOR GP-ELECTRIC
S/N 9CK1-32765
12-VOLT. STARTING AID RECOMMENDED BELOW 0 DEG CELSIUS (32 DEG F)
AN ATTACHMENT
WIRING GP
CONTROL GP-VEH SPD FIL ELEK
117-7213 CONTROL GP-VEH SPD FIL ELEK
117-7213 CONTROL GP-VEH SPD FIL ELEK
S/N 9CK1-32765
FIELD INSTALLATION
SENSOR GP-PRESSURE
161-9927 SENSOR GP-PRESSURE
161-9927 SENSOR GP-PRESSURE
S/N 9CK32765-UP
PART OF 4P-9545 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
161-9930 SENSOR GP-PRESSURE
161-9930 SENSOR GP-PRESSURE
S/N 9CK32765-UP
PART OF 4P-9545 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
S/N 9CK32765-32765
PART OF 4P-9545 SENSOR GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@249-5293@@@@@, 274-6717 SENSOR-PRESSURE
WIRING GP-ELECTRONIC CONTROL
4P-9534 WIRING GP-ELECTRONIC CONTROL
4P-9534 WIRING GP-ELECTRONIC CONTROL
S/N 9CK1-32765
WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
FIELD INSTALLATION
WIRING GP-UNIT INJECTOR
4P-9536 WIRING GP-UNIT INJECTOR
4P-9536 WIRING GP-UNIT INJECTOR
S/N 9CK1-32765
ELECTRONICS GP-MONITOR
CONTROL GP-MONITOR
185-5797 CONTROL GP-MONITOR
185-5797 CONTROL GP-MONITOR
S/N 9CK1-32765
ENGLISH, SPANISH, FRENCH
AN ATTACHMENT
MODULE GP-DISPLAY
245-4846 MODULE GP-DISPLAY
245-4846 MODULE GP-DISPLAY -MESSENGER
PROVIDES NEW DISPLAY WITH METAL INTEGRATED BEZEL TO SEAL THE UNIT
AN ATTACHMENT
MODULE GP-DISPLAY
247-4829 MODULE GP-DISPLAY
247-4829 MODULE GP-DISPLAY -MESSENGER
AN ATTACHMENT
MODULE GP-DISPLAY
302-0417 MODULE GP-DISPLAY
302-0417 MODULE GP-DISPLAY -MESSENGER
FIELD INSTALLATION
HARNESS GP
117-2763 HARNESS AS-ENGINE
117-2763 HARNESS AS-ENGINE
PART OF 4P-9534 WIRING GP-ELECTRONIC CONTROL
FOR USE WITH INTEGRATED JAKE BRAKE
114-3481 HARNESS AS-MONITOR
114-3481 HARNESS AS-MONITOR -CAT ID DISPLAY
S/N 9CK1-32765
PART OF 185-5797 CONTROL GP-MONITOR, 128-2914, 137-4558, 137-4561, 150-8720, 150-8721, 150-8722, 168-7906 DISPLAY GP-CAT ID
AN ATTACHMENT AND FIELD INSTALLATION
213-6329 HARNESS AS-MONITOR
213-6329 HARNESS AS-MONITOR -DISPLAY
S/N 9CK1-32765
PART OF 302-0417 MODULE GP-DISPLAY
249-5293 HARNESS AS-SENSOR
249-5293 HARNESS AS-SENSOR
S/N 9CK32765-UP
PART OF 161-9930 SENSOR GP-PRESSURE

Information:

(For parts list, see above)

Disassembly and Assembly
Water Temperature Sensor
3176B DIESEL TRUCK ENGINE
Truck Engine News
Brushless Alternators May Not Charge In Certain Conditions
1986/07/01
New Strap Used In Alternator Mounting Groups{1357}
1996/06/24
New Belt Tighteners Used In Alternator Mounting Groups{1358}
1996/06/24
New Strap Used In Alternator Mounting Groups{1357}
1996/08/23
New Belt Tighteners Used In Alternator Mounting Groups{1358}
1996/08/23
Improved Brackets Used In Refrigerant Compressor Mounting Groups{1802}
1997/05/27
New Alternator Now Used{1405,7168}
1997/05/27
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Drive End Bearing Service For 50/75 Amp Brushless Alternators {1405}
Drive End Bearing Service For 50/75 Amp Brushless Alternators {1405}
Specifications
Alternator
3176B DIESEL TRUCK ENGINE
Alternator
30SI Series and 34SI Series Alternator
Alternator
Alternator - Delco 21SI
Alternator
Alternator - Delco 27SI
Systems Operation
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
General Information
Alternator - Delco 21SI
Component Description
Alternator - Delco 21SI
Normal Operation
Alternator - Delco 21SI
General Information
Alternator - Delco 27SI
Normal Operation
Alternator - Delco 27SI
Component Description
Alternator - Delco 27SI
Testing and Adjusting
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Capacitor - Test
Alternator - Delco 21SI
Diode Assembly - Test
Alternator - Delco 21SI
Brush Length - Check
Alternator - Delco 21SI
Field Winding - Test
Alternator - Delco 21SI
Insulated Screw - Check
Alternator - Delco 21SI
Rectifier - Test
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 21SI
Stator - Test
Alternator - Delco 21SI
Residual Magnetism - Restore
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 27SI
Stator - Test
Alternator - Delco 27SI
Diode Assembly - Test
Alternator - Delco 27SI
Rectifier - Test
Alternator - Delco 27SI
Insulated Screw - Check
Alternator - Delco 27SI
Residual Magnetism - Restore
Alternator - Delco 27SI
Capacitor - Test
Alternator - Delco 27SI
Troubleshooting
General Information
Alternator - Delco 21SI
Charging System
Alternator - Delco 21SI
General Information
Alternator - Delco 27SI
Alternator
Alternator - Delco 27SI
Disassembly and Assembly
Alternator
3176B DIESEL TRUCK ENGINE
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Alternator - Disassemble
Alternator - Delco 21SI
Alternator - Assemble
Alternator - Delco 21SI
Alternator - Disassemble
Alternator - Delco 27SI
Alternator - Assemble
Alternator - Delco 27SI
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Improved Alternator Groups Now Available{1405}
1998/05/04
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2005/08/01
Engine News
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Operation and Maintenance Manual
Cold Weather Recommendation Charts
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09
Disassembly and Assembly
Water Temperature Sensor
3176B DIESEL TRUCK ENGINE
Truck Engine News
Proper Welding Procedure On Truck Engines With Electronic Controls{1400}
1998/05/01
Special Instruction
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Service Letter-NACD
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Service Letter-China
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Asia
Service Letter-APD
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Electronic Control Training Aid{0713}
1996/12/09
Truck Engine News
Jacobs Announces Rework Program For Certain Engine Brake Control Modules On 3176 Truck Engines{1119}
1990/02/01
New Personality Modules Require New Service Program Modules
1990/03/01
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01
New 7X-1715 Cable Assembly (Small, 40 Pin Breakout) Available{0779,1900}
1994/02/01
Service Tools For Electronic Controls{0781,0782}
1994/04/22
Service Procedure For 40 Pin Connector Seal{1901}
1994/08/30
December 1993 FLASH File Update And Fan Control Logic{1902}
1994/08/30
False Logging Of Diagnostic Codes 100-01 (FC46) "Low Oil Pressure" And 100-11 (FC46) "Very Low Oil Pressure"{1902}
1994/08/30
Corrections To 3176B/3406E Electronic Troubleshooting Guide{0374,1901}
1994/10/01
Description Of January 1995 (JAN95) Personality Module Changes {1902}
1995/01/01
Special Electronic Control Module (ECM) Used With J1939 Data Link And Eaton Autoshift Transmission{1901}
1995/02/01
Requirement For FLASH Programming Capability{1900,1901}
1995/05/01
Description Of June 1995 (JUN95) Personality Module Changes{1902}
1995/10/01
Flashing 3176B And 3406E Personality Modules With NOV95 Software {1901}
1995/12/15
False Logging Of Engine Retarder Diagnostic Codes{1900,1901,1119}
1996/01/23
False Logging Of Cylinder Fault Codes While Using The Engine Retarder{1900,1901,1119}
1996/03/27
Uprateability Improvements{1902}
1996/03/27
Personality Module Covers On Electronic Control Modules (ECM'S){1902}
1996/03/27
Electronic Changes And Features{1901}
1996/03/27
Things To Check BEFORE Replacing An Electronic Control Module (ECM){1901}
1996/04/19
Software Update Recommended For The Electronic Control Module (ECM){1902}
1996/07/30
Help Available for PC Based Service Tools Used For All Electronic Engines {1902}
1996/09/01
July 1996 Software Release{1902}
1996/12/23
Description Of August 1996 (AUG96) Software Modifications{1902}
1997/01/27
Description Of March 1997 (MAR97) Software Modifications{1920}
1997/04/01
Electronic Control Module (ECM) Part Number Changes{1901}
1997/07/01
Proper Welding Procedure On Truck Engines With Electronic Controls{1400}
1998/05/01
Flash File Bulletin Board System To Be Discontinued {1920}
1998/09/01
"Programming Cat Electronic Truck Engines" Update {1920}
1998/09/01
Electronic Controller Analyzer Programmer (ECAP) Truck SPM Version 2.3 Update{1920}
1999/01/01
Electronic Technician (ET) Version 2.3 Update{1920}
1999/01/01
New Automated Cylinder Cutout Test Available With Electronic Technician (ET) Version 2.4 Software Release{0781,1920}
1999/06/01
Engine Control Module (ECM) Hotline Is Now Available {1901}
2015/07/24
Do Not Replace The Engine Control Module (ECM) Because A 84-02 Diagnostic Fault Code Has Occurred {1900, 1901}
2000/03/01
Caterpillar Electronic Control Modules and Computer Viruses {1901, 7620}
2000/11/01
The Driver's Edition of Pocket Tec <SUP>TM</SUP> is Now Available {1900, 7620}
2001/07/01
Look up FLS and FTS Values for Rerates. {7620}
2001/08/01
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2005/08/01
Responsibilities for Emission Certified Engines {1000, 1900}
2005/09/01
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Update on the Factory Password System {1901, 7620}
2008/02/01
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 1900, 7610}
2008/05/01
Setting Modifications for the Messenger Display that Is Used With On-Highway Truck Engines in South America and Venezuela {1901, 1920, 7490}
2008/12/01
FLS/FTS Settings When Rerating Certain Heavy-Duty On-Highway Truck Engines {1000, 1901}
FLS/FTS Settings When Rerating Certain Heavy-Duty On-Highway Truck Engines {1000, 1901}
Engine News
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
Engine Harness Assembly (Bypass) Flashes Messenger When Communication Through the Service Connector is Not Possible {0779, 0781}
2004/04/01
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Cold Weather Recommendation Charts
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Personality Module Installation Guidelines for Bulk Hauler/Remote Applications{1902}
Personality Module Installation Guidelines for Bulk Hauler/Remote Applications{1902}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
ECM Communication and Flashing Issues{0709, 1901, 7620}
ECM Communication and Flashing Issues{0709, 1901, 7620}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Letter-NACD
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Replacing (FEB97) Engine Software In Certain 3176B, C-10, C-12, And 3406E Engines Used In On-Highway Vehicles
Product Support Program For Replacing (FEB97) Engine Software In Certain 3176B, C-10, C-12, And 3406E Engines Used In On-Highway Vehicles
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Australia
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-CFEL
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-CSARL
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Americas
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Replacing (FEB97) Engine Software In Certain 3176B, C-10, C-12, And 3406E Engines Used In On-Highway Vehicles
Product Support Program For Replacing (FEB97) Engine Software In Certain 3176B, C-10, C-12, And 3406E Engines Used In On-Highway Vehicles
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Brazil
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Replacing (FEB97) Engine Software In Certain 3176B, C-10, C-12, And 3406E Engines Used In On-Highway Vehicles
Product Support Program For Replacing (FEB97) Engine Software In Certain 3176B, C-10, C-12, And 3406E Engines Used In On-Highway Vehicles
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Technical Information Bulletin
Engine Idle Rpm May Be Unstable On Start Up
Engine Idle Rpm May Be Unstable On Start Up
Factory Password Availability
Factory Password Availability
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Specifications
Ether Starting Aid
3176B DIESEL TRUCK ENGINE
Tool Operating Manual
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Service Letter-China
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Asia
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove 1374560 And 1374563 Software From Parts Stock
Remove 1374560 And 1374563 Software From Parts Stock
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Disassembly and Assembly
Electronic Control Module (EMC)
3176B DIESEL TRUCK ENGINE
Personality Module (PM)
3176B DIESEL TRUCK ENGINE
Service Magazine
New Personality Modules Require New Service Program Modules {1902}
1990/03/26
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Electronic Control Training Aid{0713}
1996/12/09
Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Improved Alternator Groups Now Available{1405}
1998/05/04
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Truck Engine News
New Address For Repair Of Diagnostic Tools
1982/06/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Brushless Alternators May Not Charge In Certain Conditions
1986/07/01
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled
1987/12/01
New Personality Modules Require New Service Program Modules
1990/03/01
Improved 7X1700 Electronic Tool Group (Communication Adapter) Supports Flash Memory Downloading
1993/07/01
New 7X-1715 Cable Assembly (Small, 40 Pin Breakout) Available{0779,1900}
1994/02/01
Service Tools For Electronic Controls{0781,0782}
1994/04/22
Service Procedure For 40 Pin Connector Seal{1901}
1994/08/30
December 1993 FLASH File Update And Fan Control Logic{1902}
1994/08/30
False Logging Of Diagnostic Codes 100-01 (FC46) &quot;Low Oil Pressure&quot; And 100-11 (FC46) &quot;Very Low Oil Pressure&quot;{1902}
1994/08/30
Corrections To 3176B/3406E Electronic Troubleshooting Guide{0374,1901}
1994/10/01
Special Electronic Control Module (ECM) Used With J1939 Data Link And Eaton Autoshift Transmission{1901}
1995/02/01
Requirement For FLASH Programming Capability{1900,1901}
1995/05/01
Corrupted Fleet Trip Data{1900}
1996/01/23
Basic Electronic Troubleshooting Guide Is Now Available{1900}
1996/01/23
Listing Of Deutsch Connector Components{0374,1408}
1997/11/18
Engine News
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Engine Idle Rpm May Be Unstable On Start Up
Engine Idle Rpm May Be Unstable On Start Up
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Disassembly and Assembly
Oil Pressure Sensor
3176B DIESEL TRUCK ENGINE
Speed/Timing Sensor
3176B DIESEL TRUCK ENGINE
Service Magazine
Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09
Use 140-2266 Harness Assembly (70-Pin Breakout &quot;T&quot;) For Testing And Adjusting{1900,0781}
1998/03/23
Truck Engine News
New 7X-1715 Cable Assembly (Small, 40 Pin Breakout) Available{0779,1900}
1994/02/01
New Speed/Timing Sensor {1912}
1996/02/26
New Control Group Does Not Have An Oil Pressure Sensor And Requires Installation Of A Sensor Kit {1904,1924}
1996/09/01
Proper Welding Procedure On Truck Engines With Electronic Controls{1400}
1998/05/01
Troubleshooting The 5 Volt Sensors {1900,1906,1917,1921,1922,1923,1924,1928}
1998/09/01
An Improved Speed-Timing Sensor is Now Available {1912}
2006/06/01
Special Instruction
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installing 133-0659 Temperature Sensor Kit{1900, 1921}
Installing 133-0659 Temperature Sensor Kit{1900, 1921}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Specifications
Coolant And Fuel Temperature Sensors
3176B DIESEL TRUCK ENGINE
Oil, Boost, Atmospheric Pressure Sensors
3176B DIESEL TRUCK ENGINE
Inlet Air Temperature Sensor
3176B DIESEL TRUCK ENGINE
Speed/Timing Sensor
3176B DIESEL TRUCK ENGINE
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Product Support Program For Installing Improved Software To Reduce Engine Wear Caused By Excessive Soot In The Oil Of Certain 3176B And C-10 Truck Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Oil Pressure Sensor
3176B DIESEL TRUCK ENGINE
Water Temperature Sensor
3176B DIESEL TRUCK ENGINE
Speed/Timing Sensor
3176B DIESEL TRUCK ENGINE
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Electronic Control Training Aid{0713}
1996/12/09
Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09
Use 140-2266 Harness Assembly (70-Pin Breakout &quot;T&quot;) For Testing And Adjusting{1900,0781}
1998/03/23
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Truck Engine News
Adjust Bosch Solenoid If Replaced Or Reinstalled
1987/12/01
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Specifications
Starter Solenoid
3176B DIESEL TRUCK ENGINE
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2005/08/01
Operation and Maintenance Manual
Cold Weather Recommendation Charts
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Specifications
Ether Starting Aid
3176B DIESEL TRUCK ENGINE
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Truck Engine News
Adjust Bosch Solenoid If Replaced Or Reinstalled
1987/12/01
New Starting Motors Used {1453}
2002/05/01
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2005/08/01
Operation and Maintenance Manual
Starting Recommendations
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Cold Weather Recommendation Charts
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starter Motor
3176B DIESEL TRUCK ENGINE
Starter Solenoid
3176B DIESEL TRUCK ENGINE
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Electric Starting Motor
3176B DIESEL TRUCK ENGINE
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
Truck Engine News
New Address For Repair Of Diagnostic Tools
1982/06/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
New Personality Modules Require New Service Program Modules
1990/03/01
Improved 7X1700 Electronic Tool Group (Communication Adapter) Supports Flash Memory Downloading
1993/07/01
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01
New 7X-1715 Cable Assembly (Small, 40 Pin Breakout) Available{0779,1900}
1994/02/01
Use 1U-9500 Flow Communicator On Caterpillar Diagnostic Tools{1250,0782}
1998/02/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
Update Caterpillar Electronic Technician (Cat ET) to the Newest Version {0785}
2003/08/01
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
Schedule to Discontinue Technical Product and Warranty Support on Selected Pocket Tec Parts {0785}
2006/03/01
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
Engine Harness Assembly (Bypass) Flashes Messenger When Communication Through the Service Connector is Not Possible {0779, 0781}
2004/04/01
Schedule to Discontinue Technical Product and Warranty Support on Selected Pocket Tec Parts {0781, 1900}
2006/03/20
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
ECM Communication and Flashing Issues{0709, 1901, 7620}
ECM Communication and Flashing Issues{0709, 1901, 7620}
Technical Information Bulletin
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Tool Operating Manual
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Service Tools
Alternator - Delco 21SI
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Alternator - Delco 27SI
Service Tools
Starting Motor - Delco 50-MT
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New Personality Modules Require New Service Program Modules {1902}
1990/03/26
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
Improved Electronic Tool Group (Communication Adapter) Supports Flash Memory Downloading{1900}
1993/08/09
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Truck Engine News
117-7213 Control Group (Vehicle Speed Filter) Available For Field Installation{1914}
1994/09/01
Torque Increased for Nuts on Fuel Injector Wiring Harness {1290}
1999/12/01
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/01
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
Engine Harness Assembly (Bypass) Flashes Messenger When Communication Through the Service Connector is Not Possible {0779, 0781}
2004/04/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
Use 140-2266 Harness Assembly (70-Pin Breakout &quot;T&quot;) For Testing And Adjusting{1900,0781}
1998/03/23
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Truck Engine News
Setting Modifications for the Messenger Display that Is Used With On-Highway Truck Engines in South America and Venezuela {1901, 1920, 7490}
2008/12/01
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2005/08/01
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2014/07/15
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.