8N-9558 MOUNTING GP-ENGINE FLEXIBLE FOR USE WITH ELECTRIC GENERATOR SETS AN ATTACHMENT 3304 INDUSTRIAL ENGINE

3N-4119 MOUNTING GP-HYD PUMP DRIVE
PROVIDES MOUNTING OF CUSTOMER INSTALLED HYDRAULIC PUMP DRIVE WITH CUT-OFF CLUTCH ON FRONT OF ENGINE, CLUTCH MUST BE SAE 8 IN, SINGLE PLATE, OVER CENTER, WITH SAE NO. 5 HOUSING & NO. 305 PILOT BEARING
AN ATTACHMENT

i00366298 SEBP2156

3N4119 MOUNTING GP-HYD PUMP DRIVE Parts scheme

For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7L-5882	[1]	PULLEY-COUPLING
2.	0S-1571	[6]	BOLT (3/8-16X1.75-IN)
3.	5M-2894	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	0S-1594	[8]	BOLT (3/8-16X1-IN)
5.	7L-0603	[1]	ADAPTER
6.	0S-1585	[8]	BOLT (1/2-13X1.5-IN)
7.	5P-8245	[11]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	3N-4124	[1]	SUPPORT AS (R.H.)
9.	0L-1143	[3]	BOLT (3/8-16X2.5-IN)
10.	0S-1619	[2]	BOLT (3/8-16X3-IN)
11.	3N-4125	[1]	SUPPORT AS (L.H.)
12.	1D-4717	[1]	NUT (3/8-16-THD)
13.	0L-1352	[2]	BOLT (3/8-16X3.25-IN)
14.	0L-1329	[3]	BOLT (1/2-13X3-IN)
15.	167-8123	[1]	DAMPER AS
16.	0S-1595	[6]	BOLT (1/2-13X1.25-IN)
17.	2M-0849	[6]	WASHER-HARD (13.5X25.5X5-MM THK)
18.	3N-1332	[1]	HOUSING-ADAPTER
19.	9Y-9895	[1]	SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)
20.	3N-4126	[1]	ADAPTER-SEAL
21.	2P-1692	[1]	SEAL-O-RING
22.	3N-8231	[1]	ADAPTER-DAMPER

#SEBP21560072

3N-2924: PAN GP-OIL

PAN GP-OIL

3N-2924 PAN GP-OIL

i00366177 SEBP2156

For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-6045	[1]	GASKET-PAN PLATE
2.	030-8535	[12]	BOLT-LOCKING (3/8-16X0.875-IN)
3.	2P-2351	[1]	PLATE AS-OIL PAN
5.	034-3557	[24]	BOLT-LOCKING (3/8-16X1.125-IN)
6.	4W-5745	[1]	PAN AS-OIL
7.	8S-1963	[1]	GASKET-OIL PAN
8.	2A-3852	[1]	PLUG (OIL PAN DRAIN)
9.	5M-2894	[36]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	2A-3398	[1]	GASKET
			-OR-
	1S-3889	[1]	WASHER
	8M-4432	[1]	SEAL-O-RING

#SEBP21560073

4N-7142: PAN GP-OIL

PAN GP-OIL

4N-7142 PAN GP-OIL
PROVIDES RH & LH DIPSTICK LOCATIONS
FOR USE WITH @@@@@ 5L-1594@@@@@

i00370897 SEBP2156

For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-6045	[1]	GASKET-PAN PLATE
2.	030-8535	[12]	BOLT-LOCKING (3/8-16X0.875-IN)
3.	2P-2351	[1]	PLATE AS-OIL PAN
5.	034-3557 B	[24]	BOLT-LOCKING (3/8-16X1.125-IN)
6.	4W-5816 C	[1]	PAN AS-OIL
7.	8S-1963	[1]	GASKET-OIL PAN
8.	2A-3852	[2]	PLUG (OIL PAN DRAIN)
9.	5M-2894 B	[36]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	2A-3398	[2]	GASKET
11.	8T-6764 C	[1]	PLUG-PIPE (1/8-27-THD)
12.	8T-6762 B	[1]	PLUG-PIPE (1/2-14-THD)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP21560074

1W-2467: PISTON & ROD GP

PISTON & ROD GP

1W-2467 PISTON & ROD GP
21.0:1 RATIO. WITH HIGH COMPRESSION RATIO (HCR)-4000 FEET ALTITUDE AND ABOVE

i00355954 SEBP2156

For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-9804	[1]	PIN-PISTON
2.	9H-4015	[2]	RETAINER-PIN
3.	8N-1984	[1]	ROD AS-CONNECTING
	8N-1985	[1]	BEARING-CONNECTING ROD
4.	1P-9956	[2]	BOLT-CONNECTING ROD
	5S-6348	[2]	NUT (1/2-20-THD)
5.	328-5572	[1]	BEARING-CONNECTING ROD (STANDARD)
	8N-8221 A	[1]	BEARING-CONNECTING ROD (0.254-MM US)
	8N-8222 A	[1]	BEARING-CONNECTING ROD (0.508-MM US)
	8N-8223 A	[1]	BEARING-CONNECTING ROD (0.762-MM US)
6.	8N-3185	[1]	PISTON GP
	8N-3184	[1]	BODY AS-PISTON
7.	9S-7788	[1]	RING-PISTON (OIL CONTROL)
8.	5S-6750	[1]	RING-PISTON (INTERMEDIATE)
9.	9S-3029	[1]	RING-PISTON (TOP)

			AVAILABLE REPAIR KIT(S):
	9S-3068	[1]	RING GP-PISTON
			(CONSISTS OF COMPLETE SET OF RINGS FOR ONE PISTON.)
	A		NOT PART OF THIS GROUP
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP21560075

3N-9098: POWER TAKE-OFF GP

POWER TAKE-OFF GP

3N-9098 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH SAE NO. 1 FLYWHEEL
AN ATTACHMENT

i00366960 SEBP2156

For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9382	[12]	BOLT (7/16-14X1.25-IN)
2.	6V-0455	[1]	BALL BEARING
3.	0S-1595	[8]	BOLT (1/2-13X1.25-IN)
4.	6B-8575	[1]	KEY-SQUARE
5.	3N-9097 Y	[1]	CLUTCH GP
	Y		SEPARATE ILLUSTRATION

#SEBP21560076

4P-3074: POWER TAKE-OFF GP

POWER TAKE-OFF GP

4P-3074 POWER TAKE-OFF GP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT

i00375421 SEBP2156

For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7B-3235	[8]	BOLT (1/2-13X1.375-IN)
2.	6V-0455	[1]	BALL BEARING
3.	7F-8896	[1]	KEY-SQUARE
4.	4P-3073 Y	[1]	CLUTCH GP
5.	7X-0308	[12]	BOLT (7/16-14X1.375-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP21560077

4W-2651: POWER TAKE-OFF GP

POWER TAKE-OFF GP

4W-2651 POWER TAKE-OFF GP
REAR CLUTCH
FOR USE WITH SAE 2 FLYWHEEL HOUSING & #306 PILOT BRG. BORE
AN ATTACHMENT

i00378765 SEBP2156

For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-0898	[1]	BALL BEARING
2.	0S-1591	[8]	BOLT (3/8-16X1.5-IN)
3.	4L-4866	[1]	KEY-SQUARE
4.	4W-2650 Y	[1]	CLUTCH GP
5.	8T-2502	[12]	BOLT (3/8-16X1.125-IN)
	Y		SEPARATE ILLUSTRATION