8E-2888 CYLINDER AR-DUAL TILT S/N 8ZJ1-99999 DUAL TILT FOR USE WITH 6I-8344 BULLDOZER AR-ANGLING AN ATTACHMENT D6H XL



HYDRAULIC SYSTEM
CYLINDER GP
FILTER GP
HYDRAULIC GP

TRACK-TYPE TRACTOR D6H XL TRACK-TYPE TRACTOR 8ZJ
 D6H Series II XL Track-Type Tractor Power Shift 8ZJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2161 D6H XL 8ZJ   (1992)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & LINES GP
103-3047 CYLINDER & LINES GP
CYLINDER & LINES GP
103-3048 CYLINDER & LINES GP
8E-2888 CYLINDER AR-DUAL TILT
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
9T-2716 CYLINDER GP-RIPPER
 

#SEBP21610310
 

8E-2888: CYLINDER AR-DUAL TILT

8E-2888 CYLINDER AR-DUAL TILT
S/N 8ZJ1-99999
DUAL TILT
FOR USE WITH 6I-8344 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00413012 SEBP2161
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  9T-6095 Y [2] CYLINDER GP-TILT  
  8E-8257 Y [1] LINES GP-TILT CYLINDER  
  8C-8842 [8] BOLT (3/4-10X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21610311
 

9T-8952: CYLINDER GP-BULLDOZER LIFT

9T-8952 CYLINDER GP-BULLDOZER LIFT
S/N 8AH1-UP; 8CH1-UP; 8ZJ1-UP
101.6MM BORE X 1262MM STROKE
PART OF 103-3047, 103-3048 CYLINDER & LINES GP
AN ATTACHMENT
i00436925 SEBP2161
9T8952 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6E-4978 [1] HEAD  
2. 1F-6762 [1] BOLT (1-1/2-12X4.5-IN)  
3. 3G-8742 [1] WASHER (39.3X63.5X6-MM THK)  
4. 1M-1571 [1] RING-WEAR  
5. 8C-3839 [1] SEAL AS  
6. 9T-3885 [1] PISTON AS  
7. 8C-9160 [1] SEAL AS  
8. 9X-4611 [1] SEAL-O-RING  
9. 2K-6830 [1] RING-BACKUP  
10. 114-4304 [1] ROD AS  
11. 8E-9212 B [16] SHIM (0.8-MM THK)  
12. 4J-0121 [1] CAP AS-BEARING  
13. 0S-1756 [4] BOLT (3/4-10X4.25-IN)  
14. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
15. 8T-5668 [1] RING-WEAR  
16. 8C-3840 [1] SEAL-LIP TYPE  
17. 5J-0964 [1] SEAL-U-CUP  
18. 9T-8953 [1] CYLINDER AS  
19. 4J-6374 [2] BUSHING  
20. 1K-6985 [1] RING-RETAINING  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21610312
 

9T-8952: CYLINDER GP-BULLDOZER LIFT

9T-8952 CYLINDER GP-BULLDOZER LIFT
S/N 8AH1-99999; 8CH1-99999; 8ZJ1-99999
101.6MM BORE X 1262MM STROKE
PART OF 103-3047, 103-3048 CYLINDER & LINES GP
AN ATTACHMENT
i00436927 SEBP2161
9T8952 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 172-9981 C [1] HEAD  
2. 1F-6762 [1] BOLT (1-1/2-12X4.5-IN)  
3. 3G-8742 [1] WASHER (39.3X63.5X6-MM THK)  
4. 1M-1571 [1] RING-WEAR  
5. 167-2201 C [1] SEAL AS-BUFFER  
6. 9T-3885 [1] PISTON AS  
7. 8C-9160 [1] SEAL AS  
8. 175-7900 C [1] SEAL-O-RING  
9. 2K-6830 [1] RING-BACKUP  
10. 114-4304 [1] ROD AS  
11. 8E-9212 B [16] SHIM (0.8-MM THK)  
12. 4J-0121 [1] CAP AS-BEARING  
13. 0S-1756 [4] BOLT (3/4-10X4.25-IN)  
14. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
15. 8T-0785 C [1] RING-WEAR  
16. 167-2463 C [1] SEAL-WIPER  
17. 167-2312 C [1] SEAL-U-CUP  
18. 9T-8953 [1] CYLINDER AS  
19. 4J-6374 [2] BUSHING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21610313
 

9T-2716: CYLINDER GP-RIPPER

9T-2716 CYLINDER GP-RIPPER
S/N 1EH1-99999
127-MM (5-IN) BORE X 362-MM (14.3-IN) STROKE
PART OF 9W-0804 RIPPER AR
AN ATTACHMENT
i00433095 SEBP2161
9T2716 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
  5J-4973 [1] RING-EXPANDER  
  5J-4974 [1] SEAL  
4. 9T-2715 [1] CYLINDER AS  
4A. 4K-3128 [2] BUSHING  
5. 5P-8249 [4] WASHER-HARD (24X41.5X4-MM THK)  
6. 9T-6863 C [1] HEAD  
7. 167-2201 C [1] SEAL AS-BUFFER  
8. 167-2312 C [1] SEAL-U-CUP  
9. 225-3281 C [1] SEAL-WIPER  
10. 9T-2714 [1] ROD AS  
11. 2K-4507 [1] BUSHING  
12. 1D-4628 [4] BOLT (7/8-9X3.25-IN)  
13. 2K-4096 [1] RING-BACKUP  
14. 310-2189 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER (50.95X82X12-MM THK)  
16. 2J-0564 [1] LOCKNUT (2-12-THD)  
17. 8T-5668 C [1] RING-WEAR  
18. 1P-4576 [4] FLANGE-HALF  
19. 4J-5267 [2] SEAL-O-RING  
20. 5H-4018 [2] COVER  
21. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
22. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21610314
 

166-2582: CYLINDER GP-TILT

166-2582 CYLINDER GP-TILT
S/N 8ZJ1-99999
165.1MM (6.5 IN) BORE X 127MM (5 IN) STROKE
FIELD REPLACEMENT FOR @@@@@ 1U-3991@@@@@
i01113044 SEBP2161
1662582 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 5J-4991 [1] SEAL AS  
2. 6E-5527 [1] HEAD  
3. 8E-5703 B [24] SHIM (0.8-MM THK)  
4. 8J-2880 [1] CAP AS-BEARING  
5. 166-2583 [1] CYLINDER AS  
  166-2584 [1] CAP AS  
  166-2585 [1] CAP  
  2J-8489 [1] BEARING  
6. 312-4247 [1] SEAL-WIPER  
7. 312-4248 [1] SEAL AS-BUFFER  
8. 364-4416 [1] ROD AS  
9. 367-9479 [1] PISTON  
10. 1D-4709 [4] BOLT (1-8X3-IN)  
11. 2J-0564 [1] LOCKNUT (2-12-THD)  
12. 312-4245 [1] SEAL-U-CUP  
13. 3J-9703 [1] RING-WEAR  
14. 5P-8250 [4] WASHER (28X49X5-MM THK)  
15. 6V-8182 [4] NUT (3/4-10-THD)  
16. 7J-8955 [1] RING-BACKUP (RUBBER)  
17. 7J-8956 [1] SEAL-O-RING  
18. 7X-0373 [4] BOLT (3/4-10X5.5-IN)  
19. 8T-8379 [1] SEAL-HEAD  
20. 9T-0094 [1] RING-WEAR  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21610315
 

1U-3991: CYLINDER GP-TILT

1U-3991 CYLINDER GP-TILT
S/N 8AH1-99999
165.1-MM (6.5-IN) BORE X 127-MM (5-IN) STROKE
PART OF 8E-9375 PUSH ARM GP
FIELD REPLACEMENT ORDER @@@@@166-2582@@@@@
AN ATTACHMENT
i00354456 SEBP2161
1U3991 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-0934 [1] CYLINDER AS  
  2K-0044 [1] ELBOW  
2. 2J-8489 [1] BEARING  
3. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
4. 3J-9703 [1] RING-WEAR  
5. 4T-0259 [1] PISTON  
6. 5J-4991 [1] SEAL AS  
7. 1U-4069 [1] ROD AS  
  3J-6572 B [14] SHIM (0.5-MM THK)  
8. 7J-8955 C [1] RING-BACKUP (RUBBER)  
9. 7J-8956 C [1] SEAL-O-RING  
10. 167-2208 C [1] SEAL AS-BUFFER  
11. 6E-5527 C [1] HEAD  
12. 1D-4709 [4] BOLT (1-8X3-IN)  
  5P-8250 [4] WASHER (28X49X5-MM THK)  
13. 167-2319 C [1] SEAL-U-CUP  
14. 225-3284 C [1] SEAL-WIPER  
15. 7X-0373 [4] BOLT (3/4-10X5.5-IN)  
  6V-8182 [4] NUT (3/4-10-THD)  
16. 8J-2880 [1] CAP AS-BEARING  
17. 8E-5703 B [24] SHIM (0.8-MM THK)  
18. 9T-0094 [1] RING-WEAR  
19. 6V-2710 [1] BOLT-LOCKING (1-1/2-12X3.5-IN)  
20. 8T-8379 C [1] SEAL-HEAD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21610316
 

9T-6095: CYLINDER GP-TILT

9T-6095 CYLINDER GP-TILT
S/N 8ZJ1-UP
152-MM (6-IN) BORE X 108-MM (4-IN) STROKE
PART OF 8E-2888 CYLINDER AR-DUAL TILT
AN ATTACHMENT
i00435138 SEBP2161
9T6095 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-6094 [1] CYLINDER AS  
2. 2J-8489 [1] BEARING  
3. 5J-5731 [1] LOCKNUT (1-3/4-12-THD)  
4. 9T-6087 [1] WASHER (44.63X92X6.35-MM THK)  
5. 1J-0708 [1] RING-WEAR  
6. 6E-1205 [1] HEAD  
7. 2K-3258 [1] RING-BACKUP (RUBBER)  
8. 5H-3252 [1] SEAL-O-RING  
9. 9T-6093 [1] ROD-PISTON  
10. 1D-4627 [4] BOLT (7/8-9X3-IN)  
  5P-8249 [4] WASHER-HARD (24X41.5X4-MM THK)  
11. 9T-6092 [1] PISTON AS  
12. 5J-4989 [1] SEAL AS  
13. 8C-3840 [1] SEAL-LIP TYPE  
14. 5J-0964 [1] SEAL-U-CUP  
15. 8C-3839 [1] SEAL AS  
16. 8T-5668 [1] RING-WEAR  
17. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
18. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21610317
 

9T-6095: CYLINDER GP-TILT

9T-6095 CYLINDER GP-TILT
S/N 8ZJ1-99999
152-MM (6-IN) BORE X 108-MM (4-IN) STROKE
PART OF 8E-2888 CYLINDER AR-DUAL TILT
AN ATTACHMENT
i00435141 SEBP2161
9T6095 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-6094 [1] CYLINDER AS  
1A. 2J-8489 [1] BEARING  
2. 5J-5731 [1] LOCKNUT (1-3/4-12-THD)  
3. 132-1249 C [2] WASHER (44X84X6.35-MM THK)  
4. 1J-0708 [1] RING-WEAR  
5. 118-1170 C [1] PISTON AS  
5A. 1J-8569 [2] INSERT-PISTON  
6. 5H-3252 [1] SEAL-O-RING  
7. 2K-3258 [1] RING-BACKUP  
8. 6E-1205 [1] HEAD  
9. 9T-6093 [1] ROD-PISTON  
10. 5P-8249 [4] WASHER-HARD (24X41.5X4-MM THK)  
11. 1D-4627 [4] BOLT (7/8-9X3-IN)  
12. 8T-5668 [1] RING-WEAR  
13. 167-2201 C [1] SEAL AS-BUFFER  
14. 167-2312 C [1] SEAL-U-CUP  
15. 225-3281 C [1] SEAL-WIPER  
16. 5J-4989 [1] SEAL AS  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21610318
 

9T-8157: FILTER GP-OIL

9T-8157 FILTER GP-OIL
S/N 8ZJ1-99999
PART OF 9U-8963 LINES GP-PUMP
i00436325 SEBP2161
9T8157 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-8578 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
2. 101-1168 [1] PLUG  
3. 3J-1907 [1] SEAL-O-RING  
4. 5F-9144 [1] SEAL-O-RING  
5. 9S-8002 [1] PLUG (7/16-20-THD)  
6. 3J-7354 [1] SEAL-O-RING  
 

#SEBP21610319
 

6I-8151: HYDRAULIC AR

6I-8151 HYDRAULIC AR
S/N 8ZJ1-99999
LIFT, TILT, RIPPER - LOAD SENSING
AN ATTACHMENT
i00402998 SEBP2161
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  9G-6033 Y [1] CONTROL GP-HYDRAULIC HAND  
  9G-5394 Y [1] LINES GP-RIPPER  
  100-3216 Y [1] VALVE GP-BANK  
  2D-8154 [3] STUD-TAPERLOCK (1/2-13X2.36-IN)(TAPERLOCK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6H XL :

CYLINDER & LINES GP
103-3048 CYLINDER & LINES GP
CYLINDER & LINES GP
103-3047 CYLINDER & LINES GP
CLUTCH & BRAKE GP-STEERING
8E-9540 CLUTCH & BRAKE GP-STEERING
8E-8733 UNDERCARRIAGE AR
9U-9061 TRACK GP
6I-9673 TRACK GP
6I-9658 TRACK GP
6I-9657 TRACK GP
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
9T-2716 CYLINDER GP-RIPPER
CYLINDER GP-TILT
166-2582 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3991 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
FILTER GP-OIL
9T-8157 FILTER GP-OIL

Truck sale:

1994 CAT D6H XL
Call 
1994 CAT D6H XL

Chown Equipment Ltd.
1996 CAT D6H XL
USD $29,000 
1996 CAT D6H XL

Michigan CAT
Novi, Michigan
 
Call 
1993 CAT D6H XL

Heavy Equipment, Loaders & Parts, Inc
Lebanon, Pennsylvania
1994 CAT D6H XL
USD $41,340 
1994 CAT D6H XL

BIG MACHINERY BV
Velddriel, The Netherlands
1996 CAT D6H XL
USD $55,000 
1996 CAT D6H XL

Clark Heavy Equipment
Pleasureville, Kentucky