AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T-5348 BRACE GP-BULLDOZER S/N 8CH1-UP PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING AN ATTACHMENT D6H XL


IMPLEMENTS
BRACE GP
BULLDOZER GP
C-FRAME GP
LINKAGE GP
BULLDOZER GP

TRACK-TYPE TRACTOR D6H XL TRACK-TYPE TRACTOR 9KJ
 D6H Track-Type Tractor XL 9KJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2162 D6H XL 9KJ   (1992)

IMPLEMENTS

BRACE GP
BRACE GP-BULLDOZER
4T-5348 BRACE GP-BULLDOZER
 

#SEBP21620400
 

4T-5348: BRACE GP-BULLDOZER

4T-5348 BRACE GP-BULLDOZER
S/N 8CH1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00376821 SEBP2162
4T5348 BRACE GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5495 [2] STUD-BALL  
2. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
3. 1U-0928 [2] SCREW-ADJUSTMENT  
4. 7X-0370 [16] BOLT (3/4-10X3.5-IN)  
5. 3J-6559 [4] CAP-BEARING  
6. 8E-9212 CB [104] SHIM (0.8-MM THK)  
7. 3J-1770 [2] LOCK PIN  
8. 4F-1252 [2] PIN  
9. 160-6306 [2] CAP-BEARING  
10. 7X-0368 [4] BOLT (3/4-10X3-IN)  
11. 8E-5701 CB [52] SHIM (0.8-MM THK)  
12. 1U-0929 [2] SCREW-ADJUSTMENT  
13. 3J-6573 [2] SCREW-ADJUSTMENT  
14. 1U-1176 [2] PIN  
15. 4F-0255 [2] PIN  
16. 3B-4627 [2] PIN-COTTER  
17. 1U-1267 [2] BRACE AS  
    (EACH INCLUDES)
18. 8J-4866 [1] LUG  
19. 6F-3908 [1] HANDLE  
20. 3F-4854 [1] KNOB  
21. 7T-4970 [1] ARM AS  
22. 7T-9146 [1] ARM AS  
    (EACH ARM AS INCLUDES)
  4B-4098 [1] PLUG-CUP  
23. 1U-1174 [1] BRACKET (LH)  
  1U-1173 [1] BRACKET (RH)  
24. 1U-1175 [2] PLATE  
25. 3Y-3866 [1] NUT (2-3/4-8-THD)(FOR USE WITH 4 PLATE ARM AS)  
    -OR-
  9J-9147 [1] NUT (2-3/4-8-THD)(FOR USE WITH 2 CHANNEL ARM AS)  
26. 9W-0588 [1] BEARING (FOR USE WITH 4 PLATE ARM AS)  
    -OR-
  1U-1263 [1] BEARING (FOR USE WITH 2 CHANNEL ARM AS)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21620401
 

6I-8344: BULLDOZER AR-ANGLING

6I-8344 BULLDOZER AR-ANGLING
S/N 8CH1-UP
AN ATTACHMENT
i00403070 SEBP2162
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-1092 Y [1] BLADE GP-ANGLING  
  4T-5348 Y [1] BRACE GP-BULLDOZER  
  6I-8346 Y [1] C-FRAME GP  
  103-3047 Y [1] CYLINDER & LINES GP  
  103-3048 Y [1] CYLINDER & LINES GP  
  3G-9451 Y [1] MOUNTING GP-CYLINDER  
  4T-1753 Y [1] TRUNNION GP-BULLDOZER  
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21620402
 

6I-8345: BULLDOZER AR-ANGLING

6I-8345 BULLDOZER AR-ANGLING
S/N 8CH1-UP
AN ATTACHMENT
i00403074 SEBP2162
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-1092 Y [1] BLADE GP-ANGLING  
  4T-5348 Y [1] BRACE GP-BULLDOZER  
  6I-8346 Y [1] C-FRAME GP  
  4T-1753 Y [1] TRUNNION GP-BULLDOZER  
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21620403
 

8E-9323: BULLDOZER AR-SEMI-UNIVERSAL

8E-9323 BULLDOZER AR-SEMI-UNIVERSAL
S/N 8AH1-UP
AN ATTACHMENT
i00417145 SEBP2162
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9325 Y [1] BLADE GP-SEMI-UNIVERSAL  
  103-3047 Y [1] CYLINDER & LINES GP  
  103-3048 Y [1] CYLINDER & LINES GP  
  6Y-5705 Y [1] LINES GP-TILT & TIP CYLINDER  
  3G-9451 Y [1] MOUNTING GP-CYLINDER  
  8E-9375 Y [1] PUSH ARM GP  
  4T-1753 Y [1] TRUNNION GP-BULLDOZER  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21620404
 

8E-9324: BULLDOZER AR-SEMI-UNIVERSAL

8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
S/N 8AH1-UP
AN ATTACHMENT
i00417147 SEBP2162
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9325 Y [1] BLADE GP-SEMI-UNIVERSAL  
  6Y-5705 Y [1] LINES GP-TILT & TIP CYLINDER  
  8E-9375 Y [1] PUSH ARM GP  
  4T-1753 Y [1] TRUNNION GP-BULLDOZER  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21620405
 

6I-8346: C-FRAME GP

6I-8346 C-FRAME GP
S/N 8CH1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00403081 SEBP2162
6I8346 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0725 [1] RETAINER  
2. 8T-9398 [2] BOLT (3/4-10X1.75-IN)  
3. 160-6305 [2] CAP AS-BEARING  
  4T-4866 B [52] SHIM (0.8-MM THK)  
4. 6Y-7471 [1] PIN-PIVOT  
5. 7X-0444 [4] BOLT (1-8X6.5-IN)  
  8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
6. 4F-1204 [4] NUT (1-8-THD)  
7. 6I-8347 [1] C-FRAME AS  
  6F-2904 [2] BEARING AS  
8. 6I-8410 [1] BRACKET AS (RH)  
  6I-8411 [1] BRACKET AS (LH)  
    (EACH BRACKET AS INCLUDES)
9. 4J-2414 [1] TRUNNION  
10. 7T-9586 [6] BEARING  
11. 8P-9770 [1] PLATE  
12. 9W-4897 [6] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  8F-4387 [2] PLATE  
13. 9W-5375 [2] BAR  
14. 9W-9000 [1] ADAPTER AS  
  5M-6214 [1] PLUG (1/8-27 PTF)  
  8E-5486 [2] BUSHING  
15. 9V-0321 [1] BLOCK  
  B   USE AS REQUIRED
 

#SEBP21620406
 

8E-2305: LINKAGE GP-IMPLEMENT

8E-2305 LINKAGE GP-IMPLEMENT
S/N 9KJ1-UP
PART OF 9W-3525 INSTALLATION AR-WINCH
Type 1
AN ATTACHMENT
i00412505 SEBP2162
8E2305 LINKAGE GP-IMPLEMENT Parts scheme 8E2305 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-3205 [1] LEVER  
2. 1B-8706 [2] KEY-WOODRUFF  
3. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
4. 8Y-0736 [1] LEVER  
5. 6K-0095 [1] LEVER  
6. 4L-9337 [6] BOLT (3/8-16X1.5-IN)  
7. 2K-4973 [5] LOCKNUT (3/8-16-THD)  
8. 8Y-0735 [1] SUPPORT  
9. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-8801 [4] NUT (3/8-16-THD)  
11. 5G-8209 [1] LEVER  
12. 8T-4835 [1] BOLT (1/2-13X2-IN)  
13. 6V-8188 [1] NUT (1/2-13-THD)  
14. 1B-8704 [1] KEY-WOODRUFF  
15. 2K-0400 [1] END-YOKE ROD  
16. 1B-0676 [1] PIN  
17. 3B-4617 [1] PIN-COTTER  
18. 6V-2866 C [5] SPACER  
19. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
  1A-2812 [1] WASHER (0.06-MM THK)  
20. 6T-7163 [1] SEAL-DOMED  
21. 6T-7162 [1] SEAL-DOMED  
22. 3G-8856 [1] WASHER (17X30X5-MM THK)  
23. 3T-9345 [1] BRACKET  
24. 3P-3676 [1] CLAMP  
25. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
26. 6T-2411 [1] GUIDE  
27. 4J-3044 [2] BEARING AS-NEEDLE  
28. 8T-0741 [4] SEAL-LIP TYPE  
29. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
30. 8T-8915 [1] BOLT (3/8-16X3.25-IN)  
  2B-0941 [2] SPACER (10.5X19X19-MM THK)  
31. 5G-8210 [1] LEVER AS  
32. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
33. 5G-8211 [1] LEVER  
34. 9H-7089 [1] ROD END  
35. 9U-8993 [1] BAR AS  
36. 8T-9101 [1] BOLT (3/8-16X2.75-IN)  
37. 8Y-0734 [1] SHAFT  
38. 3B-4629 [1] PIN-COTTER  
39. 7X-0521 [2] WASHER-HARD (20X36.5X5-MM THK)  
40. 8T-1177 [4] BEARING-ROLLER  
41. 8F-7702 [4] SEAL-LIP TYPE  
42. 9U-9148 C [2] ROD  
  9W-9687 C [4] STUD  
  6V-8183 C [4] NUT-FULL (3/8-24-THD)  
43. 5J-5315 [2] ROD END  
44. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
45. 3S-2713 [4] NUT-FULL (3/8-24-THD)  
46. 5J-5315 [2] ROD END  
47. 2L-6267 [3] LOCKNUT (3/8-24-THD)  
48. 3L-5389 [2] TIE ROD  
49. 4D-4064 [4] ROD END (3/8-24-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21620407
 

8E-2305: LINKAGE GP-IMPLEMENT

8E-2305 LINKAGE GP-IMPLEMENT
S/N 9KJ1-UP
PART OF 9W-3525 INSTALLATION AR-WINCH
Type 2
AN ATTACHMENT
i00412513 SEBP2162
8E2305 LINKAGE GP-IMPLEMENT Parts scheme 8E2305 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-3205 [1] LEVER  
2. 1B-8706 [2] KEY-WOODRUFF  
3. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
4. 8Y-0736 [1] LEVER  
5. 6K-0095 [1] LEVER  
6. 4L-9337 C [5] BOLT (3/8-16X1.5-IN)  
7. 2K-4973 [5] LOCKNUT (3/8-16-THD)  
8. 8Y-0735 [1] SUPPORT  
9. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-8801 [4] NUT (3/8-16-THD)  
11. 5G-8209 [1] LEVER  
12. 8T-4835 [1] BOLT (1/2-13X2-IN)  
13. 6V-8188 [1] NUT (1/2-13-THD)  
14. 1B-8704 [1] KEY-WOODRUFF  
15. 2K-0400 [1] END-YOKE ROD  
16. 1B-0676 [1] PIN  
17. 3B-4617 [1] PIN-COTTER  
18. 6V-2866 C [4] SPACER  
19. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
  1A-2812 [1] WASHER (0.06-MM THK)  
20. 6T-7163 [1] SEAL-DOMED  
21. 6T-7162 [1] SEAL-DOMED  
22. 3G-8856 [1] WASHER (17X30X5-MM THK)  
23. 3T-9345 [1] BRACKET  
24. 3P-3676 [1] CLAMP  
25. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
26. 6T-2411 [1] GUIDE  
27. 4J-3044 [2] BEARING AS-NEEDLE  
28. 8T-0741 [4] SEAL-LIP TYPE  
29. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
30. 8T-8915 [1] BOLT (3/8-16X3.25-IN)  
  2B-0941 [2] SPACER (10.5X19X19-MM THK)  
31. 5G-8210 [1] LEVER AS  
32. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
33. 5G-8211 [1] LEVER  
34. 9H-7089 [1] ROD END  
35. 9U-8993 [1] BAR AS  
36. 8T-9101 [1] BOLT (3/8-16X2.75-IN)  
37. 8T-9377 C [1] BOLT (3/8-16X2.25-IN)  
38. 9G-8661 C [1] SPACER (10X16X20-MM THK)  
39. 3B-4629 [1] PIN-COTTER  
40. 7X-0521 [2] WASHER-HARD (20X36.5X5-MM THK)  
41. 8T-1177 [4] BEARING-ROLLER  
42. 8F-7702 [4] SEAL-LIP TYPE  
43. 9U-9148 [2] ROD  
  9W-9687 [4] STUD  
  6V-8183 [4] NUT-FULL (3/8-24-THD)  
44. 5J-5315 [3] ROD END  
45. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
46. 3S-2713 [4] NUT-FULL (3/8-24-THD)  
47. 8Y-0734 [1] SHAFT  
48. 2L-6267 [3] LOCKNUT (3/8-24-THD)  
49. 3L-5389 [2] TIE ROD  
50. 4D-4064 [4] ROD END (3/8-24-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21620408
 

8E-9375: PUSH ARM GP

8E-9375 PUSH ARM GP
S/N 8AH1-UP
PART OF 8E-9323, 8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00695219 SEBP2162
8E9375 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-6305 [2] CAP AS-BEARING  
2. 7X-0444 [4] BOLT (1-8X6.5-IN)  
  4F-1204 [4] NUT (1-8-THD)(1-8-2B THD)  
3. 8E-9365 [1] PUSH ARM AS (RH)  
4. 9W-2580 [1] BEARING  
5. 9W-2579 [2] PLATE  
6. 8P-9770 [1] PLATE  
7. 9W-9165 [1] BEARING  
8. 4T-0732 [1] BRACKET  
9. 1U-2533 [1] BAR  
10. 1U-3991 Y [1] CYLINDER GP-TILT  
11. 3F-6185 [2] PIN (LARGE)  
  4F-0255 [2] PIN (SMALL)  
  3B-4627 [2] PIN-COTTER  
12. 8J-2880 [3] CAP AS-BEARING  
13. 7X-0375 [8] BOLT (3/4-10X5-IN)  
  4F-2710 [8] NUT (3/4-10-THD)(3/4-10-3B THD)  
14. 8E-9366 [1] PUSH ARM AS (LH)  
15. 4T-0780 [1] TRUNNION  
16. 9W-9165 [1] BEARING  
17. 9W-2580 [1] BEARING  
18. 8P-9770 [1] PLATE  
19. 124-9666 [1] BRACKET  
20. 1U-2533 [1] BAR  
21. 4T-4866 B [52] SHIM (0.8-MM THK)  
22. 124-9672 [1] BRACE AS-TILT  
  8E-2887 [1] YOKE  
23. 7X-0582 [6] WASHER-HARD (20X44.5X6-MM THK)  
24. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
25. 8E-5703 B [78] SHIM (0.8-MM THK)  
26. 7X-0372 [6] BOLT (3/4-10X4.25-IN)  
  8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
27. 4T-1520 [1] CAGE AS  
  6J-5383 [1] BEARING  
28. 6V-8182 [10] NUT (3/4-10-THD)  
29. 7X-0373 [4] BOLT (3/4-10X5.5-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP21620409
 

4T-1753: TRUNNION GP-BULLDOZER

4T-1753 TRUNNION GP-BULLDOZER
S/N 8AH1-UP; 8CH1-UP; 9KJ1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING, 8E-9323, 8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00375416 SEBP2162
4T1753 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4103 [2] TRUNNION  
2. 8T-9399 [20] BOLT (3/4-10X2.25-IN)  
 

Information:

Caterpillar Parts SIS Catalog D6H XL :

VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-SELECTOR & PRESS CONT
6T-2842 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-RELIEF
9T-5364 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-5144 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-3541 VALVE GP-RELIEF
VALVE GP-RELIEF
6E-6025 VALVE GP-RELIEF
VALVE GP-RELIEF
4T-5142 VALVE GP-RELIEF
VALVE GP-RELIEF
4T-1008 VALVE GP-RELIEF
6I-8344 BULLDOZER AR-ANGLING
6I-8345 BULLDOZER AR-ANGLING
8E-9323 BULLDOZER AR-SEMI-UNIVERSAL
8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
C-FRAME GP
6I-8346 C-FRAME GP
LINKAGE GP-IMPLEMENT
8E-2305 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8E-2305 LINKAGE GP-IMPLEMENT
PUSH ARM GP
8E-9375 PUSH ARM GP

Truck sale:

1994 CAT D6H XL
Call 
1994 CAT D6H XL

Chown Equipment Ltd.
1996 CAT D6H XL
USD $29,000 
1996 CAT D6H XL

Michigan CAT
Novi, Michigan
 
Call 
1993 CAT D6H XL

Heavy Equipment, Loaders & Parts, Inc
Lebanon, Pennsylvania
1994 CAT D6H XL
USD $41,340 
1994 CAT D6H XL

BIG MACHINERY BV
Velddriel, The Netherlands
1996 CAT D6H XL
USD $55,000 
1996 CAT D6H XL

Clark Heavy Equipment
Pleasureville, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.