AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U3991 CYLINDER GP-TILT (CHGS 7-12) 165.1 MM (6.5 IN.) BORE X 127 MM (5 IN.) STROKE BULLDOZER S/N 1CH1-UP,1DH1-UP PART OF 6Y0949 PUSH ARM AN ATTACHMENT D6H XR


HYDRAULIC SYSTEM
CYLINDER GP
PUMP GP
HYDRAULIC GP
PUMP GP
OPERATOR STATION
CONTROL GP-HYDRAULIC

TRACK-TYPE TRACTOR D6H XR TRACK-TYPE TRACTOR 5KK
 D6H XR SERIES II TRACK-TYPE TRACTOR / POWER SHIFT / 5KK00001-UP (MACHINE) POWERED BY 3306 ENGINE SEBP2163 D6H XR 5KK   (1992)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
9W-9057 CYLINDER AR-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3991 CYLINDER GP-TILT
CYLINDER & LINES GP
103-3048 CYLINDER & LINES GP
CYLINDER & LINES GP
103-3047 CYLINDER & LINES GP
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
MOUNTING GP-CYLINDER
3G-9451 MOUNTING GP-CYLINDER
 

#SEBP21630300
 

1U-3991: CYLINDER GP-TILT

1U3991 CYLINDER GP-TILT (CHGS 7-12)
165.1 MM (6.5 IN.) BORE X 127 MM (5 IN.) STROKE
BULLDOZER S/N 1CH1-UP,1DH1-UP
PART OF 6Y0949 PUSH ARM
AN ATTACHMENT
c619309 SEBP2163
1U3991 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0934 [1] CYLINDER AS  
2. 2J-8489 [1] BEARING  
3. 3S-6162 [1] WASHER-HARD (6MM THK)  
4. 3J-9703 J [1] RING-WEAR  
5. 4T-0259 [1] PISTON  
6. 5J-4991 [1] SEAL AS  
7. 1U-4069 [1] ROD AS  
8. 7J-8955 C [1] RING-BACKUP  
9. 7J-8956 C [1] SEAL-O-RING  
10. 8C-9126 [1] SEAL AS  
11. 6E-5527 C [1] HEAD  
12. 1D-4709 [4] BOLT (1-8X3IN)  
  5P-8250 [4] WASHER (5.0MM THK)  
13. 5J-8300 J [1] SEAL-U-CUP  
14. 8C-5218 [1] SEAL-LIP  
15. 7X-0373 [4] BOLT (3/4-10X5.50IN)  
  6V-8182 [4] NUT (3/4-10 THD)  
16. 8J-2880 [1] CAP-BEARING  
17. 8E-5703 B [24] SHIM (0.8MM THK)  
18. 9T-0094 [1] RING-WEAR  
19. 6V-2710 [1] BOLT-LOCKING  
20. 8T-8379 C [1] SEAL-HEAD  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1408 [1] KIT-HYD CYLINDER SEAL  
    (INCL. SEALS, RINGS,
    AND PARTS MARKED J)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21630301
 

103-3048: CYLINDER & LINES GP

1033048 CYLINDER & LINES GP-LH
BULLDOZER S/N 1BH1-UP,1CH1-UP,1DH1-UP,6HH1-UP
9T8952-PAGE 206
PART OF 6Y5718, 6Y5719, 6Y5721, 9U9314 BULLDOZER ARS
AN ATTACHMENT
c637293 SEBP2163
1033048 CYLINDER & LINES GP Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9182 [1] ELBOW-FACE SEAL  
  7M-8485 [1] SEAL-O-RING (29.74MM ID)  
2. 5S-7379 [4] BOLT (3/8-16X.875IN)  
3. 8T-4896 [10] WASHER-HARD (2.5MM THK)  
4. 1P-4577 [2] FLANGE-HALF  
5. 5S-7382 [4] BOLT (3/8-16X1.375IN)  
6. 8T-2502 [1] BOLT (3/8-16X1.13IN)  
7. 6V-8801 [2] NUT (3/8-16 THD)  
8. 9U-9122 [1] CLAMP (TAB)  
  9U-9121 [1] CLAMP (SLOT)  
9. 6I-8134 I [1] HOSE AS  
10. 9X-8260 [1] CONNECTOR-O-RING  
  4K-1388 [1] SEAL-O-RING (26.59MM ID)  
11. 129-3217 [1] GUARD AS  
12. 4J-0520 [3] SEAL-O-RING (32.92MM ID)  
13. 6I-8135 I [1] HOSE AS  
14. 8T-1897 [1] CLIP (SLOT)  
  8T-1898 [1] CLIP (TAB)  
15. 6V-8400 [1] SEAL-0-RING (29.9MM ID)  
  9U-9161 [1] TUBE AS  
16. 6V-9746 [1] SEAL-O-RING (18.94MM ID)  
17. 9T-8952 Y [1] CYLINDER GP-BULLDOZER LIFT  
18. 8S-0023 [1] CLIP (SLOT)  
  8S-0024 [1] CLIP (TAB)  
19. 4L-9337 [1] BOLT (3/8-16X1.50IN)  
  5P-1075 [2] WASHER-HARD (3MM THK)  
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21630302
 

103-3047: CYLINDER & LINES GP

1033047 CYLINDER & LINES GP-RH
BULLDOZER S/N 1BH1-UP,1CH1-UP,1DH1-UP,6HH1-UP
9T8952-PAGE 206
PART OF 6Y5718, 6Y5719, 6Y5721, 9U9314 BULLDOZER ARS
AN ATTACHMENT
c637294 SEBP2163
1033047 CYLINDER & LINES GP Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9182 [1] ELBOW-FACE SEAL  
  7M-8485 [1] SEAL-O-RING (29.74MM ID)  
2. 5S-7379 [4] BOLT (3/8-16X.875IN)  
3. 8T-4896 [10] WASHER-HARD (2.5MM THK)  
4. 1P-4577 [2] FLANGE-HALF  
5. 5S-7382 [4] BOLT (3/8-16X1.375IN)  
6. 8T-2502 [1] BOLT (3/8-16X1.13IN)  
7. 6V-8801 [2] NUT (3/8-16 THD)  
8. 9U-9122 [1] CLAMP (TAB)  
9. 9U-9121 [1] CLAMP (SLOT)  
10. 9X-8260 [1] CONNECTOR-O-RING  
  4K-1388 [1] SEAL-O-RING  
11. 9U-9162 [1] TUBE AS  
  6V-8400 [1] SEAL-0-RING (29.9MM ID)  
12. 6I-8136 I [1] HOSE AS  
13. 6I-8133 I [1] HOSE AS  
14. 129-3217 [1] GUARD AS  
15. 4J-0520 [3] SEAL-O-RING (32.92MM ID)  
16. 9T-8952 Y [1] CYLINDER GP-BULLDOZER LIFT  
17. 8T-1897 [1] CLIP (SLOT)  
  8T-1898 [1] CLIP (TAB)  
18. 5P-1075 [2] WASHER-HARD (3MM THK)  
  4L-9337 [1] BOLT (3/8-16X1.50IN)  
19. 6V-9746 [1] SEAL-O-RING (18.94MM ID)  
20. 8S-0023 [1] CLIP (SLOT)  
  8S-0024 [1] CLIP (TAB)  
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21630303
 

9T-8952: CYLINDER GP-BULLDOZER LIFT

9T8952 CYLINDER GP-DOZER LIFT-2 REQUIRED-(CHG 00-07)-TYPE 1
101.6 MM (4 IN.) BORE X 262 MM (10.3 IN.) STROKE
PART OF 1033047, 1033048 CYLINDERS & LINES
AN ATTACHMENT
c592695 SEBP2163
9T8952 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4978 [1] HEAD  
2. 1F-6762 [1] BOLT  
3. 3G-8742 [1] WASHER  
4. 1M-1571 [1] RING-WEAR  
5. 8C-3839 [1] SEAL AS  
6. 9T-3885 [1] PISTON AS  
7. 8C-9160 [1] SEAL AS  
8. 9X-4611 [1] SEAL-O-RING  
9. 2K-6830 [1] RING-BACKUP  
10. 114-4304 [1] ROD AS  
11. 8E-9212 B [16] SHIM  
12. 4J-0121 [1] CAP-BEARING  
13. 0S-1756 [4] BOLT  
14. 2J-3506 [4] NUT-FULL  
15. 8T-5668 [1] RING-WEAR  
16. 8C-3840 [1] SEAL-LIP  
17. 5J-0964 [1] SEAL-U-CUP  
18. 9T-8953 [1] CYLINDER AS  
19. 4J-6374 [2] BEARING-SLEEVE  
20. 1K-6985 [1] RING-RETAINING  
  B   USE AS REQUIRED
 

#SEBP21630304
 

9T-8952: CYLINDER GP-BULLDOZER LIFT

9T8952 CYLINDER GP-BULLDOZER LIFT-2 REQUIRED-(CHG 08)-TYPE 2
101.6MM (4 IN) BORE X 1262MM (49.7 IN) STROKE
PART OF 1033047, 1033048 CYLINDERS & LINES
AN ATTACHMENT
c638142 SEBP2163
9T8952 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-3397 C [1] HEAD  
2. 1F-6762 [1] BOLT (1 1/2-12X4.5IN)  
3. 3G-8742 [1] WASHER  
4. 1M-1571 [1] RING-WEAR  
5. 8C-3839 [1] SEAL AS  
6. 9T-3885 [1] PISTON AS  
7. 8C-9160 [1] SEAL AS  
8. 9X-4611 [1] SEAL-O-RING  
9. 2K-6830 [1] RING-BACKUP  
10. 114-4304 [1] ROD AS  
11. 8E-9212 B [16] SHIM (.8MM THK)  
12. 4J-0121 [1] CAP-BEARING  
13. 0S-1756 [4] BOLT (3/4-10X4.25IN)  
14. 2J-3506 [4] NUT-FULL (3/4-10 THD)  
15. 8T-0785 C [1] RING-WEAR  
16. 8C-3840 [1] SEAL-LIP  
17. 5J-0964 [1] SEAL-U-CUP  
18. 9T-8953 [1] CYLINDER AS  
19. 4J-6374 [2] BEARING-SLEEVE  
20. 1K-6985 [1] RING-RETAINING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21630305
 

3G-9451: MOUNTING GP-CYLINDER

3G9451 MOUNTING GP-CYLINDER
BULLDOZER S/N 1BH1-UP,1CH1-UP,1DH1-UP,6HH1-UP
PART OF 6Y5718, 6Y5719, 6Y5721, 9U9314 BULLDOZER ARS
AN ATTACHMENT
c541633 SEBP2163
3G9451 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4875 [2] PIN  
2. 3B-8489 [2] FITTING-GREASE  
3. 5M-3062 C [2] BOLT  
  8T-2561 [2] WASHER  
4. 7X-0358 [8] BOLT  
5. 6Y-2658 [2] YOKE  
6. 5P-2671 [2] SEAL-LIP TYPE  
7. 6Y-9280 C [2] CLAMP (TAB)  
  6Y-9281 C [2] CLAMP (SLOT)  
8. 5P-8248 C [2] WASHER-HARD  
9. 8T-4835 C [2] BOLT  
10. 8T-4223 C [4] WASHER  
11. 6V-8188 C [2] NUT  
12. 9N-4233 C [2] STRAP  
13. 3G-9405 [4] CAP AS  
    (EACH INCLUDES)
14. 3G-9402 [1] BEARING-SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21630306
 

3T-8360: PUMP GP-GEAR

3T8360 PUMP GP-GEAR-1 SECTION-WINCH
3T8359-PAGE 209
PART OF 7T0421 INSTALLATION AR-WINCH
AN ATTACHMENT
c484498 SEBP2163
3T8360 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-8359 Y [1] PUMP GP-GEAR  
2. 0S-1585 [2] BOLT  
3. 3T-8923 [1] ADAPTER-OIL PUMP  
4. 5F-3106 [1] SEAL-O-RING  
5. 1S-2174 [1] SEAL-O-RING  
6. 0S-1566 [2] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21630307
 

6I-8151: HYDRAULIC AR

6I8151 HYDRAULIC AR-3 VALVE
LIFT, TILT, RIPPER-LOAD SENSING
AN ATTACHMENT
SEBP21630307 SEBP2163
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
   
   
  9G-6033 Y [1] CONTROL GP-HYDRAULIC HAND  
   
  9G-5394 Y [1] LINES GP-RIPPER  
   
  100-3216 Y [1] VALVE GP-BANK-3  
   
  2D-8154 [3] STUD-TAPERLOCK  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21630308
 

3T-8359: PUMP GP-GEAR

3T8359 PUMP GP-GEAR-WINCH
PART OF 3T8360 PUMP-GEAR
AN ATTACHMENT
c596590 SEBP2163
3T8359 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-8922 [1] COVER AS-OIL PUMP  
  1M-3780 [1] BEARING  
2. 1A-5183 [1] BOLT  
3. 2D-8009 [2] SEAL-O-RING  
4. 9M-2210 [1] BODY AS-OIL PUMP  
5. 3S-0004 [6] WASHER  
6. 3T-8926 [1] COVER AS-OIL PUMP  
  1M-3780 [1] BEARING  
  1H-0974 [2] DOWEL  
7. 3T-8927 [1] GEAR AS-PUMP  
8. 9M-8281 [1] GEAR AS-PUMP  
9. 5S-6622 [1] SEAL-LIP  
10. 9S-4191 [1] PLUG-O-RING  
11. 3J-1907 [1] SEAL-O-RING  
12. 0L-1143 [5] BOLT  
 

#SEBP21630309
 

9G-5669: CONTROL GP-HYDRAULIC HAND

9G5669 CONTROL GP-HYDRAULIC HAND-PART 1 OF 2
LIFT & TILT
c748001 SEBP2163
9G5669 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-3989 [1] SHAFT-GOVERNOR CONTROL  
2. 8T-0741 [10] SEAL-LIP  
3. 8T-0798 [2] BEARING-ROLLER  
4. 8Y-0737 [1] CHANNEL AS  
5. 4J-3044 [4] BEARING-NEEDLE  
6. 8T-4896 [6] WASHER-HARD  
7. 030-7571 [4] BOLT  
8. 102-2913 [1] FILM-INSTRUCTION  
9. 4L-6454 [4] BOLT  
10. 9W-4262 [1] HANDLE  
11. 2J-7295 [1] SPRING  
12. 7G-8018 [1] SHAFT AS  
13. 3W-3986 [1] LEVER  
14. 3T-9345 [1] BRACKET  
15. 8T-2502 [2] BOLT  
16. 6V-8183 [8] NUT-FULL  
17. 5H-4215 [1] ROD  
18. 5J-5315 [6] ROD END  
19. 2L-6267 [6] LOCKNUT  
20. 9G-1240 [1] SEAL  
21. 6P-5209 [1] COVER  
22. 6P-5208 [1] GUIDE-CONTROL  
23. 6P-5207 [1] SEAL-DOMED  
24. 7T-6763 [1] LEVER  
25. 4L-9337 [5] BOLT  
  6V-8801 [5] NUT  
26. 3T-9351 [1] SHAFT-GOVERNOR CONTROL  
27. 8T-2637 [1] PIN-SPRING  
28. 7X-3374 [1] NUT-FULL  
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6H XR :

CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
9W-9057 CYLINDER AR-TILT
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
LINES GP-WINCH
7G-7857 LINES GP-WINCH
LINES GP-BULLDOZER
9U-8962 LINES GP-BULLDOZER
LINES GP-RIPPER
9W-1018 LINES GP-RIPPER
LINES GP-RIPPER
9G-5394 LINES GP-RIPPER
CYLINDER & LINES GP
103-3048 CYLINDER & LINES GP
CYLINDER & LINES GP
103-3047 CYLINDER & LINES GP
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
9T-8952 CYLINDER GP-BULLDOZER LIFT
MOUNTING GP-CYLINDER
3G-9451 MOUNTING GP-CYLINDER
PUMP GP-GEAR
3T-8360 PUMP GP-GEAR
6I-8151 HYDRAULIC AR
PUMP GP-GEAR
3T-8359 PUMP GP-GEAR

Truck sale:

1986 CAT D6H XR
USD $39,500 
1986 CAT D6H XR

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
1996 CAT D6H XR
Call 
1996 CAT D6H XR

Hayden Machinery LLC
Springfield, Missouri
1992 CAT D6H XR
USD $49,500 
1992 CAT D6H XR

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.