AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7T6996 IDLER GP-TRACK 4-REQUIRED D6H XR TRACK-TYPE TRACTOR


UNDERCARRIAGE
IDLER GP
BAR GP-EQUALIZER
FRAME GP-TRACK ROLLER
ADJUSTMENT GP-HYDRAULIC TRACK
PIVOT BAR GP
OPERATOR STATION
CONTROL GP-TRANSMISSION

TRACK-TYPE TRACTOR D6H XR TRACK-TYPE TRACTOR 6CK
 D6H XR SERIES II TRACTOR DIFFERENTIAL STEERING 6CK00001-UP (MACHINE) POWERED BY 3306 ENGINE SEBP2164 D6H XR 6CK   (1992)

UNDERCARRIAGE

IDLER GP
CAP GP-TRACK ROLLER
7G-5690 CAP GP-TRACK ROLLER
CAP GP-TRACK IDLER
6T-2024 CAP GP-TRACK IDLER
IDLER GP-TRACK
7T-6996 IDLER GP-TRACK
 

#SEBP21640230
 

7T-6996: IDLER GP-TRACK

7T6996 IDLER GP-TRACK
4-REQUIRED
c565783 SEBP2164
7T6996 IDLER GP-TRACK Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-3220 [1] SHAFT  
2. 6T-4871 [2] STABILIZER-SEAL  
3. 9W-6649 [2] SEAL GP-DUO-CONE  
4. 0S-1594 [24] BOLT  
  5M-2894 [24] WASHER  
5. 9G-9350 J [2] RETAINER AS  
    (EACH INCLUDES)
  2H-1190 [4] PIN-DOWEL  
  9G-9346 [1] WASHER-THRUST  
    -OR-
6. 9G-9349 J [2] RETAINER  
7. 106-7691 J [2] WASHER-THRUST  
8. 2H-3928 [2] SEAL-O-RING  
9. 6Y-0473 [1] PLUG-CLEAR  
  9G-5664 [1] STOPPER-RUBBER  
10. 7T-8940 [1] BEARING & IDLER AS  
   
   
    J-THESE PARTS ARE
    DIRECTLY
    INTERCHANGEABLE
 

#SEBP21640231
 

9U-8773: EQUALIZER BAR GP

9U8773 EQUALIZER BAR GP
c700806 SEBP2164
9U8773 EQUALIZER BAR GP Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3896 [1] PIN AS  
2. 8G-4190 [4] SEAL  
3. 9U-8481 [2] PIN AS  
4. 7X-0342 [2] BOLT (5/8-11X.74IN)  
5. 7X-0587 [2] WASHER-HARD (3MM THK)  
6. 3W-9678 [1] SPACER (12MM THK)  
7. 7X-0466 [1] BOLT  
8. 7V-3715 [1] WASHER  
9. 1J-6472 [4] RING-RETAINING (99.9MM OD)  
10. 3W-5979 [1] BAR AS  
11. 8G-8311 [2] BEARING-SLEEVE  
12. 7K-9205 [2] SEAL-LIP (63.5MM ID)  
13. 8G-8316 [2] SPACER  
14. 8G-4189 [2] BEARING-SELF ALIGNING  
15. 3B-8489 [2] FITTING-GREASE (1/8-27 THD)  
16. 030-7946 [1] ELBOW (7/16-20 STR THD)  
  3J-7354 [1] SEAL-O-RING (8.92MM ID)  
17. 4L-6454 [1] BOLT (3/8-16X1.0IN)  
18. 8T-4896 [3] WASHER-HARD (2.5MM THK)  
19. 124-0174 [1] CLIP (12.7MM ID)  
20. 8N-1702 I [1] HOSE AS  
21. 5S-7379 [2] BOLT (3/8-16X.875IN)  
22. 6Y-3954 [1] SUPPORT AS  
23. 8L-6557 [1] CONNECTOR  
24. 3B-8485 [1] FITTING-HYDRAULIC  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP21640232
 

9U-8776: FRAME GP-TELESCOPING RECOIL

9U8776 FRAME GP-TELESCOPING RECOIL-RH
S/N 6CK1-380
9U8492-PAGE 160
c711727 SEBP2164
9U8776 FRAME GP-TELESCOPING RECOIL Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-2077 [1] BEARING  
2. 3W-1852 [1] RING-RETAINER  
3. 9X-4582 [1] SEAL AS  
4. 8T-4223 [26] WASHER-HARD  
5. 8T-2502 [4] BOLT  
6. 8T-4896 [4] WASHER-HARD  
7. 8E-1212 [1] COVER AS  
  5P-9891 [1] PLATE-WARNING  
  7B-3028 [4] SCREW-DRIVE  
8. 8T-8919 [26] BOLT  
9. 6Y-8037 [2] GUIDE AS  
    (EACH INCLUDES)
  8T-7532 [1] FILM-WARNING  
10. 9U-8492 Y [1] TRACK ADJUSTER & RECOIL GP  
11. 9U-8456 [2] STRIP  
  9U-8791 [2] SPACER  
12. 9U-9206 [2] STRIP  
  9U-9209 [2] SPACER  
13. 5H-6734 [1] SEAL-O-RING  
14. 1B-5174 [2] PLUG-PIPE  
15. 9U-8782 [1] FRAME AS  
  6V-2226 [1] PLATE-WARNING  
  4B-4158 [4] SCREW  
16. 3T-1162 [1] BEARING-SLEEVE  
17. 7T-5886 [2] DOWEL  
18. 9U-8451 [1] GUARD AS (RH FRONT)  
  9U-8457 [1] GUARD AS (LH FRONT)  
    (EA GUARD AS INCLS)
  6J-0499 [1] LUG  
19. 8E-1326 [1] FRAME AS  
  1P-1413 [1] BOSS  
20. 7T-5886 [2] DOWEL  
21. 7P-8370 [1] BEARING (190.7MM OD)  
  7J-1333 [1] BEARING (137.04MM OD)  
22. 9U-8786 [1] GUARD AS-RH (REAR)  
  9U-8787 [1] GUARD AS-LH (REAR)  
23. 9G-1962 [2] HOOK  
   
24. 8G-9530 AB [4] SHIM (8MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP21640233
 

9U-8776: FRAME GP-TELESCOPING RECOIL

9U8776 FRAME GP-TELESCOPING RECOIL-RH
S/N 6CK381-UP
9U8492-PAGE 160
c706404 SEBP2164
9U8776 FRAME GP-TELESCOPING RECOIL Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-2077 [1] BEARING  
2. 3W-1852 [1] RING-RETAINER  
3. 9X-4582 [1] SEAL AS  
4. 8T-4223 [26] WASHER-HARD (3MM THK)  
5. 8T-2502 [4] BOLT (3/8-16X1.13IN)  
  8T-4896 [4] WASHER-HARD (2.5MM THK)  
6. 5C-6565 C [14] BOLT (1/2-13X1.25IN)  
7. 8E-1212 [1] COVER AS  
  5P-9891 [1] PLATE-WARNING  
  7B-3028 [4] SCREW-DRIVE (#4X3/16IN)  
8. 8T-8919 C [12] BOLT (1/2-13X1.75IN)  
9. 6Y-8037 [2] GUIDE AS  
    (EACH INCLUDES)
  8T-7532 [1] FILM-WARNING  
10. 9U-8492 Y [1] TRACK ADJUSTER & RECOIL GP  
11. 9U-8456 [2] STRIP  
    (REAR OUTER, REAR INNER)
12. 9U-9206 [2] STRIP  
13. 5H-6734 [1] SEAL-O-RING (113.89MM ID)  
14. 1B-5174 [2] PLUG-PIPE (3/4-14 NPTF)  
15. 8E-1326 [1] FRAME AS  
  1P-1413 [1] BOSS  
    (5/8-11X1.0IN OAL)
16. 7T-5886 [2] DOWEL  
17. 7P-8370 [1] BEARING (190.7MM OD)  
  7J-1333 [1] BEARING (137.04MM OD)  
18. 9U-8786 [1] GUARD AS-RH (REAR)  
  9U-8787 [1] GUARD AS-LH (REAR)  
19. 9G-1962 [2] HOOK  
20. 9U-8782 [1] FRAME AS  
  6V-2226 [1] PLATE-WARNING  
  4B-4158 [4] SCREW (DRIVE)  
21. 3T-1162 [1] BEARING-SLEEVE  
22. 7T-5886 [2] DOWEL  
23. 9U-8451 [1] GUARD AS (RH FRONT)  
  9U-8457 [1] GUARD AS (LH FRONT)  
    (EA GUARD AS INCLS)
  6J-0499 [1] LUG (1/2-13 THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21640234
 

9U-8777: FRAME GP-TELESCOPING RECOIL

9U8777 FRAME GP-TELESCOPING RECOIL-LH
S/N 6CK1-380
9U8492-PAGE 160
c712387 SEBP2164
9U8777 FRAME GP-TELESCOPING RECOIL Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-2077 [1] BEARING  
2. 3W-1852 [1] RING-RETAINER  
3. 9X-4582 [1] SEAL AS  
4. 8T-4223 [26] WASHER-HARD  
5. 8T-2502 [4] BOLT  
  8T-4896 [4] WASHER-HARD  
6. 1B-5174 [2] PLUG-PIPE  
7. 8E-1212 [1] COVER AS  
  5P-9891 [1] PLATE-WARNING  
  7B-3028 [4] SCREW-DRIVE  
8. 8T-8919 [26] BOLT  
9. 6Y-8037 [2] GUIDE AS  
    (EACH INCLUDES)
  8T-7532 [1] FILM-WARNING  
10. 9U-8492 Y [1] TRACK ADJUSTER & RECOIL GP  
11. 9U-8456 [2] STRIP  
  9U-8791 [2] SPACER  
12. 9U-9206 [2] STRIP  
  9U-9209 [2] SPACER  
13. 5H-6734 [1] SEAL-O-RING  
14. 8E-1329 [1] FRAME AS  
  1P-1413 [1] BOSS  
15. 7T-5886 [2] DOWEL  
16. 7P-8370 [1] BEARING (190.7MM OD)  
  7J-1333 [1] BEARING (137.04MM OD)  
17. 9U-8786 [1] GUARD AS-RH (REAR)  
  9U-8787 [1] GUARD AS-LH (REAR)  
18. 9G-1962 [2] HOOK  
19. 9U-8782 [1] FRAME AS  
  6V-2226 [1] PLATE-WARNING  
  4B-4158 [4] SCREW  
20. 3T-1162 [1] BEARING-SLEEVE  
21. 7T-5886 [2] DOWEL  
22. 9U-8451 [1] GUARD AS (RH FRONT)  
  9U-8457 [1] GUARD AS (LH FRONT)  
    (EA GUARD AS INCLS)
  6J-0499 [1] LUG  
   
23. 8G-9530 AB [4] SHIM  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP21640235
 

9U-8777: FRAME GP-TELESCOPING RECOIL

9U8777 FRAME GP-TELESCOPING RECOIL-LH
S/N 6CK381-UP
9U8492-PAGE 160
c712669 SEBP2164
9U8777 FRAME GP-TELESCOPING RECOIL Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-2077 [1] BEARING  
2. 3W-1852 [1] RING-RETAINER  
3. 9X-4582 [1] SEAL AS  
4. 8T-4223 [26] WASHER-HARD (3MM THK)  
5. 8T-2502 [4] BOLT (3/8-16X1.13IN)  
  8T-4896 [4] WASHER-HARD (2.5MM THK)  
6. 5C-6565 C [14] BOLT (1/2-13X1.25IN)  
7. 8E-1212 [1] COVER AS  
  5P-9891 [1] PLATE-WARNING  
  7B-3028 [4] SCREW-DRIVE (#4X3/16IN)  
8. 8T-8919 C [12] BOLT (1/2-13X1.75IN)  
9. 6Y-8037 [2] GUIDE AS  
    (EACH INCLUDES)
  8T-7532 [1] FILM-WARNING  
10. 9U-8492 Y [1] TRACK ADJUSTER & RECOIL GP  
11. 9U-8456 [2] STRIP (REAR OUTER, REAR INNER)  
12. 9U-9206 [2] STRIP  
13. 5H-6734 [1] SEAL-O-RING (113.89MM ID)  
14. 1B-5174 [2] PLUG-PIPE (3/4-14 NPTF)  
15. 8E-1329 [1] FRAME AS  
  1P-1413 [1] BOSS (5/8-11X1.0IN OAL)  
16. 7T-5886 [2] DOWEL  
17. 7P-8370 [1] BEARING (190.7MM OD)  
  7J-1333 [1] BEARING (137.04MM OD)  
18. 9U-8786 [1] GUARD AS-RH (REAR)  
  9U-8787 [1] GUARD AS-LH (REAR)  
19. 9G-1962 [2] HOOK  
20. 9U-8782 [1] FRAME AS  
  6V-2226 [1] PLATE-WARNING  
  4B-4158 [4] SCREW (DRIVE)  
21. 3T-1162 [1] BEARING-SLEEVE  
22. 7T-5886 [2] DOWEL  
23. 9U-8451 [1] GUARD AS (RH FRONT)  
  9U-8457 [1] GUARD AS (LH FRONT)  
    (EA GUARD AS INCLS)
  6J-0499 [1] LUG (1/2-13 THD)  
   
24. 8G-9530 AB [4] SHIM (8MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21640236
 

9U-8492: TRACK ADJUSTER & RECOIL GP

9U8492 TRACK ADJUSTER & RECOIL GP
TYPE 1
PART OF 9U8776, 9U8777 FRAME-TELESCOPIC RECOIL
c552758 SEBP2164
9U8492 TRACK ADJUSTER & RECOIL GP Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-0640 [1] PISTON  
2. 9U-8778 [1] CYLINDER  
3. 9S-8010 [1] PLUG-O-RING  
4. 2S-4078 [1] SEAL-O-RING  
5. 0S-1571 [2] BOLT  
6. 5M-2894 [2] WASHER  
7. 3W-2369 [1] PLATE AS  
8. 3T-0598 [1] TUBE  
9. 9U-8790 [1] PLATE AS  
10. 9U-8491 [1] SPRING-RECOIL  
11. 6V-8142 [1] SEAL-UPPER-CUP  
12. 6Y-5799 [2] LOCK  
13. 2S-5925 [1] VALVE  
14. 2S-5926 [1] VALVE  
15. 2L-1701 [4] BOLT  
  5P-8247 [4] WASHER-HARD  
16. 2J-6274 [1] SEAL-O-RING  
 

#SEBP21640237
 

9U-8492: TRACK ADJUSTER & RECOIL GP

9U8492 TRACK ADJUSTER & RECOIL GP
TYPE 2
PART OF 9U8776, 9U8777 FRAME-TELESCOPIC RECOIL
c616784 SEBP2164
9U8492 TRACK ADJUSTER & RECOIL GP Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-0640 [1] PISTON  
2. 108-0200 C [1] CYLINDER  
3. 9S-8010 [1] PLUG-O-RING (1-5/8-12'THD)  
4. 2S-4078 [1] SEAL-O-RING (37.46MM ID)  
5. 8T-4182 MC [2] BOLT (M10X1.5X45MM)  
6. 8T-4121 C [2] WASHER (2.5MM THK)  
7. 3W-2369 [1] PLATE AS  
8. 3T-0598 [1] TUBE  
9. 9U-8790 [1] PLATE AS  
10. 9U-8491 [1] SPRING-RECOIL  
11. 6V-8142 [1] SEAL-U-CUP  
12. 6Y-5799 [2] LOCK  
13. 2S-5925 [1] VALVE (FILL)  
14. 2S-5926 [1] VALVE (RELIEF)  
15. 7X-2553 MC [4] BOLT (M16X2.0X40MM)  
  9X-8257 C [4] WASHER (3.50MM THK)  
16. 2J-6274 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP21640238
 

5G-9837: PIVOT BAR GP

5G9837 PIVOT BAR GP
c603792 SEBP2164
5G9837 PIVOT BAR GP Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0427 [16] BOLT  
2. 5G-9842 [2] SEAL  
3. 5G-9839 [2] SHAFT AS  
    (EACH INCLUDES)
4. 5G-9841 [1] RING  
5. 9M-3786 [2] SEAL-O-RING  
6. 7X-0366 [10] BOLT  
  8T-4994 [10] WASHER  
7. 0S-1589 [12] BOLT  
8. 5G-8993 [2] RETAINER  
9. 3T-2051 [2] COVER  
10. 8E-1900 [2] WASHER-THRUST  
11. 5G-9843 [2] PLATE  
   
    QUANTITIES SHOWN ARE
    THOSE REQUIRED FOR
    BOTH LH AND RH SIDES
 

#SEBP21640239
 

8E-2411: CONTROL GP-STEERING & TMSN

8E2411 CONTROL GP-STEERING & TRANSMISSION-PART 1 OF 2
3T1078-PAGE 165, 6Y5501-PAGE 166
c747650 SEBP2164
8E2411 CONTROL GP-STEERING & TMSN Parts scheme
  For full view, you need register

Parts for your D6H XR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5501 Y [1] CONTROL GP-STEERING & TMSN  
2. 6Y-3216 [1] PLATE AS  
3. 8T-4896 [13] WASHER-HARD (2.5MM THK)  
4. 5S-7379 [4] BOLT (3/8-16X.875IN)  
5. 6Y-2768 [1] HOUSING-BEARING  
  4H-9105 [1] SEAL-O-RING (110.72MM ID)  
6. 4D-4064 [1] ROD END  
7. 6Y-5009 [1] LEVER-LOCK  
8. 9L-7712 [1] NUT (3/8-24 THD)  
9. 3B-4615 [3] PIN-COTTER  
10. 6Y-2851 [1] ROD-EYE  
11. 6V-8183 [3] NUT-FULL (3/8-24 THD)  
12. 6G-6396 [1] WASHER  
13. 3T-1078 Y [1] VALVE GP-BRAKE  
14. 6V-8189 [2] NUT (5/16-18 THD)  
  7X-0440 [2] BOLT (5/16-18X1.75IN)  
  8T-4224 [2] WASHER-HARD (2MM THK)  
15. 8E-3082 I [1] HOSE AS  
16. 8E-3081 I [1] HOSE AS  
17. 9W-4565 [1] BOOT  
18. 6V-8724 [2] ELBOW (9/16-18 THD)  
19. 6V-8397 [6] SEAL-O-RING (9.27MM ID)  
20. 3J-1907 [5] SEAL-O-RING (11.89MM ID)  
21. 6V-8636 [2] CONNECTOR  
22. 1B-0676 [2] PIN  
23. 6V-9200 [1] ELBOW-FACE SEAL  
  3J-7354 [1] SEAL-O-RING (8.92MM ID)  
24. 8T-4122 [2] WASHER (3.5MM THK)  
25. 3W-8209 [1] SUPPORT AS  
26. 9P-2388 [1] LEVER  
27. 1B-8704 [2] KEY-WOODRUFF  
28. 4L-9337 [2] BOLT (3/8-16X1.50IN)  
29. 2K-4973 [3] LOCKNUT (3/8-16 THD)  
30. 9G-0742 [2] BOOT  
31. 3W-8206 [1] ROD AS  
32. 9C-1111 I [1] HOSE AS  
33. 1S-0996 [1] CLIP (20.64MM ID)  
34. 6V-9001 [1] ELBOW-45 DEGREE (9/16-18 THD)  
35. 3W-8208 [1] SHAFT-GOVERNOR CONTROL  
36. 5S-7382 [1] BOLT (3/8-16X1.375IN)  
37. 8T-9364 [2] BOLT (1/4-20X.625IN)  
  8T-4205 [2] WASHER-HARD (2MM THK)  
38. 5D-1849 [1] LEVER  
39. 9W-9629 [1] PLATE AS  
  9F-6445 [2] NUT (1/4-20 THD)  
40. 8T-2502 [8] BOLT (3/8-16X1.13IN)  
41. 4M-5974 [1] ROD  
42. 6I-9578 [1] SPACER  
43. 1A-9252 [3] END-ADJUSTMENT ROD  
44. 6V-3265 [2] CLIP (9.52MM ID)  
45. 9G-0715 [2] COVER  
  8M-5661 [2] SEAL-O-RING (47.22MM ID)  
46. 6V-8801 [1] NUT (3/8-16 THD)  
47. 5P-8502 [1] PADLOCK GP  
  6V-5874 A [1] COVER  
  5P-8500 A [2] KEY  
48. 6J-0488 [1] SCREW-HEAD (3/8-16X.875IN)  
49. 6H-3616 [2] PLUG-PROTECTION  
50. 8C-3108 [1] PLUG  
51. 5P-7988 [3] PLUG-BUTTON  
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Service Magazine
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Caterpillar Parts SIS Catalog D6H XR :

CAP GP-TRACK IDLER
6T-2024 CAP GP-TRACK IDLER
GUARD GP-TRACK GUIDE
6I-9025 GUARD GP-TRACK GUIDE
GUARD GP-TRACK GUIDE
9U-8467 GUARD GP-TRACK GUIDE
LINK AS-TRACK
6I-9670 LINK AS-TRACK
LINK AS-TRACK
8E-4327 LINK AS-TRACK
6I-9649 TRACK GP
6I-9650 TRACK GP
6I-9647 TRACK GP
EQUALIZER BAR GP
9U-8773 EQUALIZER BAR GP
FRAME GP-TELESCOPING RECOIL
9U-8776 FRAME GP-TELESCOPING RECOIL
FRAME GP-TELESCOPING RECOIL
9U-8776 FRAME GP-TELESCOPING RECOIL
FRAME GP-TELESCOPING RECOIL
9U-8777 FRAME GP-TELESCOPING RECOIL
FRAME GP-TELESCOPING RECOIL
9U-8777 FRAME GP-TELESCOPING RECOIL
TRACK ADJUSTER & RECOIL GP
9U-8492 TRACK ADJUSTER & RECOIL GP
TRACK ADJUSTER & RECOIL GP
9U-8492 TRACK ADJUSTER & RECOIL GP
PIVOT BAR GP
5G-9837 PIVOT BAR GP

Truck sale:

1986 CAT D6H XR
USD $39,500 
1986 CAT D6H XR

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
1996 CAT D6H XR
Call 
1996 CAT D6H XR

Hayden Machinery LLC
Springfield, Missouri
1992 CAT D6H XR
USD $49,500 
1992 CAT D6H XR

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.