HYDRAULIC SYSTEM
LINES GP-PUMPLINES GP-RIPPER
LINES GP-CYLINDER
LINES GP-WINCH
CYLINDER GP
HYDRAULIC SYSTEM
LINES GP-PUMP
#SEBP21660360
6Y-5319: LINES GP-PUMP
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-7501 I | [1] | HOSE AS | |
| 2. | 1P-3703 | [4] | SEAL-RECTANGULAR | |
| 3. | 5P-7468 | [2] | CLIP (SLOT) | |
| 5P-7469 | [2] | CLIP (TAB) | ||
| 8T-7087 | [2] | GROMMET (34-MM ID) | ||
| 4. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 5. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 5G-7185 | [1] | PLATE AS | |
| 1F-0748 | [1] | NUT-WELD (1/2-13-THD) | ||
| 7. | 8C-6877 | [12] | BOLT (7/16-14X1.75-IN) | |
| 8T-5360 | [12] | WASHER (12X22.5X2.5-MM THK) | ||
| 8. | 1P-5766 | [6] | FLANGE-HALF | |
| 9. | 6V-8636 | [1] | CONNECTOR | |
| 10. | 3J-1907 C | [6] | SEAL-O-RING | |
| 11. | 3W-7498 | [1] | TUBE AS | |
| 1P-3709 | [1] | SEAL-RECTANGULAR | ||
| 12. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
| 6V-0852 | [2] | CAP-DUST | ||
| 13. | 6V-8397 | [4] | SEAL-O-RING | |
| 14. | 1P-3708 | [1] | SEAL-RECTANGULAR | |
| 15. | 6V-8724 C | [1] | ELBOW | |
| 16. | 6V-9836 | [1] | TEE-SWIVEL | |
| 17. | 3W-7500 I | [1] | HOSE AS | |
| 18. | 6V-9850 | [1] | ELBOW | |
| 19. | 8C-4365 M | [6] | BOLT (M14X2X80-MM) | |
| 20. | 6D-4244 | [1] | CLIP (LOOP) | |
| 21. | 5P-2566 | [6] | BOLT (1/2-13X1.5-IN) | |
| 22. | 6V-4432 | [4] | BOLT (1/2-13X4-IN) | |
| 23. | 6V-0484 | [2] | ELBOW | |
| 24. | 5P-4868 | [4] | CLAMP-HOSE | |
| 25. | 8E-1408 C | [1] | HOSE | |
| 5G-7191 | [1] | SPRING | ||
| 26. | 3W-7496 | [1] | TUBE AS | |
| 27. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 4S-5898 | [1] | SEAL-O-RING | ||
| 28. | 9T-4789 Y | [1] | VALVE GP-COUNTERBALANCE | |
| 4J-0520 | [2] | SEAL-O-RING | ||
| 29. | 5G-8944 I | [1] | HOSE AS | |
| 30. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 31. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 1P-3702 | [2] | SEAL-RECTANGULAR | |
| 33. | 3W-7503 I | [1] | HOSE AS | |
| 34. | 3W-7504 I | [1] | HOSE AS | |
| 35. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 36. | 8T-4223 C | [14] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 37. | 7G-5984 | [1] | CLIP (TAB) | |
| 7G-5985 | [1] | CLIP (SLOT) | ||
| 8T-7088 | [1] | GROMMET | ||
| 38. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 39. | 3W-7505 | [1] | SUPPORT AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 8V-6117 | [1] | SPACER-SPECIAL (THREADED) | ||
| 40. | 6V-8636 | [1] | CONNECTOR | |
| 41. | 6V-8397 | [4] | SEAL-O-RING | |
| 42. | 6V-8724 | [2] | ELBOW | |
| 43. | 1P-3703 C | [2] | SEAL-RECTANGULAR | |
| 44. | 3D-6627 | [3] | STUD-TAPERLOCK | |
| 1K-6872 | [3] | LOCKNUT (1/2-13-THD) | ||
| 45. | 6L-1698 | [3] | SPACER (13.87X21.34X12.7-MM THK) | |
| 46. | 5P-2094 E | HOSE (9CM) | ||
| 5P-2230 | [2] | CLAMP-HOSE | ||
| 47. | 3J-1907 | [3] | SEAL-O-RING | |
| 48. | 6Y-3204 | [2] | TUBE AS | |
| 49. | 7X-0346 | [2] | BOLT (5/8-11X2-IN)(HYDRAULIC TANK MOUNTING BOLT) | |
| 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK)(HYDRAULIC TANK MOUNTING BOLT) | ||
| 50. | 3W-7507 I | [1] | HOSE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21660361
3W-7374: LINES GP-RIPPER
3W-7374 LINES GP-RIPPER
S/N 9LK1-UP
PART OF 6I-8153 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N 9LK1-UP
PART OF 6I-8153 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-4018 | [2] | COVER | |
| 1P-4576 | [4] | FLANGE-HALF | ||
| 2. | 4J-5267 | [2] | SEAL-O-RING | |
| 3. | 5S-7382 | [8] | BOLT (3/8-16X1.375-IN) | |
| 8T-4896 C | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 4. | 5G-9866 | [1] | BAFFLE AS | |
| 5B-9627 | [4] | WASHER (10.3X19X5-MM THK) | ||
| 5. | 7J-0729 | [2] | CLIP (SLOT) | |
| 6. | 7J-0728 | [2] | CLIP (TAB) | |
| 7. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 8. | 5G-9867 | [1] | BRACKET AS | |
| 9. | 9F-2978 | [6] | NUT-WELD (3/8-16-THD) | |
| 10. | 3W-7491 | [2] | TUBE AS | |
| 11. | 1P-3703 C | [3] | SEAL-RECTANGULAR | |
| 12. | 1P-4578 | [2] | FLANGE-HALF | |
| 13. | 3W-7487 I | [1] | HOSE AS | |
| 14. | 6V-8636 | [1] | CONNECTOR | |
| 15. | 3J-1907 | [4] | SEAL-O-RING | |
| 16. | 6V-8781 | [1] | TEE | |
| 17. | 3W-7490 I | [1] | HOSE AS | |
| 18. | 6V-8397 | [5] | SEAL-O-RING | |
| 19. | 7C-4353 C | [1] | CLIP | |
| 20. | 6V-9850 | [1] | ELBOW | |
| 21. | 3W-7489 I | [1] | HOSE AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 22. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| 8T-5360 | [4] | WASHER (12X22.5X2.5-MM THK) | ||
| 23. | 3W-7492 I | [1] | HOSE AS | |
| 24. | 8T-0075 | [1] | CONNECTOR | |
| 25. | 6V-8724 | [1] | ELBOW | |
| 26. | 4J-0519 C | [2] | SEAL-O-RING | |
| 27. | 5J-0489 CJ | [1] | WASHER (0.5X0.7X0.125-IN THK) | |
| 28. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 29. | 3W-6655 | [1] | COVER AS | |
| 30. | 8T-2501 | [4] | BOLT (3/8-16X2-IN) | |
| 31. | 8T-4896 C | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 33. | 5S-7379 C | [1] | BOLT (3/8-16X0.875-IN) | |
| 34. | 7C-4353 C | [1] | CLIP | |
| 35. | 6D-4244 | [1] | CLIP (LOOP) | |
| 36. | 8C-6877 | [4] | BOLT (7/16-14X1.75-IN) | |
| 8T-5360 | [4] | WASHER (12X22.5X2.5-MM THK) | ||
| 37. | 6V-0400 | [2] | FLANGE-HALF | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | FOR USE WITH TILT LINES | |||
#SEBP21660362
9W-1018: LINES GP-RIPPER
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-5888 | [1] | SPACER (0.42X0.67X0.63-IN THK) | |
| 2. | 9M-2904 | [8] | CLAMP-HOSE | |
| 3. | 112-4368 | [2] | SHIELD | |
| 4. | 130-1977 | [8] | SHIELD | |
| 5. | 130-9192 | [8] | GROMMET | |
| 6. | 208-6726 I | [1] | HOSE AS | |
| 7. | 208-6727 | [1] | SHIELD | |
| 8. | 208-9699 I | [1] | HOSE AS | |
| 9. | 3G-8047 | [1] | GROMMET | |
| 10. | 3G-8054 | [1] | CLIP (TAB) | |
| 11. | 3G-8057 | [1] | CLIP (SLOT) | |
| 12. | 4J-5267 | [4] | SEAL-O-RING | |
| 13. | 4L-9337 | [10] | BOLT (3/8-16X1.5-IN) | |
| 14. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 15. | 5P-7464 | [1] | CLIP (SLOT) | |
| 16. | 5P-7465 | [1] | CLIP (TAB) | |
| 17. | 6V-1249 | [1] | GROMMET (22-MM ID) | |
| 18. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 19. | 8T-2501 | [1] | BOLT (3/8-16X2-IN) | |
| 20. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP21660363
6Y-5705: LINES GP-TILT & TIP CYLINDER
6Y-5705 LINES GP-TILT & TIP CYLINDER
S/N 8BH1-UP
PART OF 8E-9323, 8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
S/N 8BH1-UP
PART OF 8E-9323, 8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8398 | [4] | SEAL-O-RING | |
| 2. | 6V-9169 | [2] | NUT (13/16-16-THD) | |
| 3. | 7T-6934 I | [1] | HOSE AS | |
| 4. | 3Y-5405 | [2] | RUBBER | |
| 5. | 4J-5267 | [4] | SEAL-O-RING | |
| 6. | 8T-4223 | [7] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 8. | 1P-4576 | [4] | FLANGE-HALF | |
| 9. | 5S-7382 | [8] | BOLT (3/8-16X1.375-IN) | |
| 10. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 5P-2228 | [3] | BOLT (1/2-13X1-IN) | |
| 12. | 4T-1564 | [1] | GUARD | |
| 13. | 4T-1563 | [1] | GUARD AS | |
| 14. | 7T-6931 I | [1] | HOSE AS | |
| 15. | 6V-8981 | [2] | ELBOW | |
| 16. | 6Y-5706 I | [1] | HOSE AS | |
| 17. | 6Y-5707 I | [1] | HOSE AS | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP21660364
1U-2525: LINES GP-TILT CYLINDER
1U-2525 LINES GP-TILT CYLINDER
S/N 3TH1-UP; 5CH1-UP
PART OF 3A-8415 BULLDOZER AR-SEMI-UNIVERSAL, 3A-8414 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
S/N 3TH1-UP; 5CH1-UP
PART OF 3A-8415 BULLDOZER AR-SEMI-UNIVERSAL, 3A-8414 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-3475 CI | [1] | HOSE AS | |
| 2. | 6Y-3476 CI | [1] | HOSE AS | |
| 3. | 4J-5267 C | [4] | SEAL-O-RING | |
| 4. | 4T-1564 | [1] | GUARD | |
| 3Y-5405 | [2] | RUBBER | ||
| 5. | 6V-8981 | [2] | ELBOW | |
| 6V-8398 | [4] | SEAL-O-RING | ||
| 6V-9169 | [2] | NUT (13/16-16-THD) | ||
| 6. | 5P-2228 C | [3] | BOLT (1/2-13X1-IN) | |
| 7. | 8T-4223 C | [7] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 8T-8917 C | [4] | BOLT (1/2-13X1.25-IN) | |
| 9. | 7T-6934 I | [1] | HOSE AS | |
| 10. | 7T-6931 I | [1] | HOSE AS | |
| 11. | 5S-7382 C | [8] | BOLT (3/8-16X1.375-IN) | |
| 8T-4896 C | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 12. | 1P-4576 | [4] | FLANGE-HALF | |
| 13. | 4T-1563 | [1] | GUARD AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP21660365
3W-3107: LINES GP-TILT CYLINDER
3W-3107 LINES GP-TILT CYLINDER
S/N 9LK1-UP
PART OF 9U-8589 CONTROL AR-HYDRAULIC
S/N 9LK1-UP
PART OF 9U-8589 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-9337 C | [4] | BOLT (3/8-16X1.5-IN) | |
| 2. | 8T-4896 C | [30] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 6Y-3477 CI | [1] | HOSE AS | |
| 4. | 5G-9153 C | [1] | MANIFOLD | |
| 5. | 5P-1075 C | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 6. | 1P-4575 C | [4] | FLANGE-HALF | |
| 4J-5267 | [2] | SEAL-O-RING | ||
| 7. | 1P-4576 C | [4] | FLANGE-HALF | |
| 8. | 6Y-3480 CI | [1] | HOSE AS | |
| 9. | 3G-8054 | [4] | CLIP (TAB) | |
| 3G-8057 | [4] | CLIP (SLOT) | ||
| 10. | 3G-8047 | [4] | GROMMET | |
| 11. | 6V-8801 C | [2] | NUT (3/8-16-THD) | |
| 12. | 4L-6454 C | [6] | BOLT (3/8-16X1-IN) | |
| 13. | 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | |
| 14. | 3H-8683 C | [8] | CLIP | |
| 1K-5888 C | [4] | SPACER (0.42X0.67X0.63-IN THK) | ||
| 15. | 5S-7382 C | [16] | BOLT (3/8-16X1.375-IN) | |
| 16. | 4J-0520 | [2] | SEAL-O-RING | |
| 17. | 5J-0489 C | [2] | WASHER (0.5X0.7X0.125-IN THK) | |
| 18. | 5S-7383 C | [1] | BOLT (3/8-16X1.75-IN) | |
| 19. | 8T-2502 C | [2] | BOLT (3/8-16X1.125-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP21660366
9W-9079: LINES GP-TILT CYLINDER
9W-9079 LINES GP-TILT CYLINDER
S/N 9LK1-UP
PART OF 9W-9057 CYLINDER AR-DUAL TILT
AN ATTACHMENT
S/N 9LK1-UP
PART OF 9W-9057 CYLINDER AR-DUAL TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-0596 | [1] | GUARD AS (LH) | |
| 2. | 6Y-0597 | [1] | GUARD AS (RH) | |
| 3. | 4L-6454 C | [2] | BOLT (3/8-16X1-IN) | |
| 4. | 3K-0360 | [2] | SEAL-O-RING | |
| 5. | 8T-4223 C | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 9W-9083 I | [2] | HOSE AS | |
| 7. | 9W-9082 I | [2] | HOSE AS | |
| 8. | 1P-4576 | [20] | FLANGE-HALF | |
| 9. | 9B-7237 C | [40] | BOLT (3/8-16X1.25-IN) | |
| 10. | 8T-4896 C | [48] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 6V-1249 | [2] | GROMMET (22-MM ID) | |
| 12. | 6Y-3469 CI | [1] | HOSE AS | |
| 13. | 6Y-3470 CI | [1] | HOSE AS | |
| 14. | 4J-5267 C | [12] | SEAL-O-RING | |
| 15. | 3G-8047 | [1] | GROMMET | |
| 16. | 3G-8054 | [1] | CLIP (TAB) | |
| 17. | 3G-8057 | [1] | CLIP (SLOT) | |
| 18. | 6V-8625 | [2] | ELBOW | |
| 19. | 2P-6588 | [2] | HEAD-ADAPTER | |
| 20. | 6V-8398 | [2] | SEAL-O-RING | |
| 21. | 5S-8766 | [1] | GUARD (LH) | |
| 22. | 5S-8709 | [1] | GUARD-CENTER | |
| 23. | 5S-8765 | [1] | GUARD (RH) | |
| 24. | 5S-8718 | [1] | TUBE AS | |
| 25. | 5S-8714 | [2] | TUBE AS | |
| 26. | 5S-8712 | [6] | BLOCK | |
| 27. | 5S-7383 C | [6] | BOLT (3/8-16X1.75-IN) | |
| 28. | 7X-0325 C | [6] | BOLT (1/2-13X2.5-IN) | |
| 29. | 8T-8917 C | [10] | BOLT (1/2-13X1.25-IN) | |
| 30. | 6Y-0625 | [1] | BRACKET AS | |
| 31. | 6Y-0598 | [1] | BRACKET AS | |
| 32. | 5P-7464 | [2] | CLIP (SLOT) | |
| 33. | 5P-7465 | [2] | CLIP (TAB) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP21660367
3W-7832: LINES GP-WINCH
3W-7832 LINES GP-WINCH
S/N 9LK1-UP
PART OF 9W-3525 INSTALLATION AR-WINCH
AN ATTACHMENT
S/N 9LK1-UP
PART OF 9W-3525 INSTALLATION AR-WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-8444 | [3] | GROMMET (37-MM ID) | |
| 2. | 3W-8311 | [1] | BRACKET AS | |
| 3. | 9U-8729 | [1] | HOSE AS | |
| 4. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 5. | 8B-6561 | [1] | SPACER (5.56X22.22X55.58-MM THK) | |
| 6. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 7. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 1P-4579 | [2] | FLANGE-HALF | |
| 9. | 4J-0524 | [2] | SEAL-O-RING | |
| 10. | 1P-4577 | [2] | FLANGE-HALF | |
| 11. | 4J-0520 | [2] | SEAL-O-RING | |
| 12. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 13. | 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 14. | 8T-9378 | [1] | BOLT (3/8-16X4-IN) | |
| 15. | 5P-7468 | [7] | CLIP (SLOT) | |
| 5P-7469 | [7] | CLIP (TAB) | ||
| 16. | 7D-7233 | [1] | CLIP (LOOP) | |
| 17. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 18. | 5G-9146 I | [1] | HOSE AS | |
| 19. | 8T-8917 | [1] | BOLT (1/2-13X1.25-IN) | |
| 20. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP21660368
6Y-6964: LINES GP-WINCH
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6L-3616 | [1] | CONNECTOR | |
| 2. | 6V-0367 | [1] | ADAPTER | |
| 3. | 6V-0432 | [1] | TEE-FLARED | |
| 4. | 9L-9045 | [1] | TEE | |
| 5. | 9G-2036 | [1] | TUBE AS | |
| 6. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 7. | 6T-6624 | [1] | TUBE AS | |
| 8. | 9L-8557 | [1] | TEE-INVERTED FLARED | |
| 9. | 9G-2039 | [1] | TUBE AS | |
| 10. | 0L-2072 | [2] | CLIP | |
| 11. | 7T-9475 | [1] | TUBE AS | |
| 12. | 6T-5928 | [1] | TUBE AS | |
| 13. | 5K-9243 | [2] | ELBOW-FLARED | |
| 14. | 5K-9238 | [4] | CONNECTOR | |
| 15. | 5M-2894 C | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 9G-2038 | [1] | TUBE AS | |
| 17. | 4F-4879 | [1] | BOLT (3/8-16X0.5-IN) | |
| 3V-3308 | [1] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 18. | 6Y-9349 | [1] | VALVE AS | |
| 19. | 5K-9244 | [1] | ELBOW-FLARED | |
| 20. | 0T-0102 | [1] | BOLT (3/8-16X0.625-IN) | |
| 21. | 0T-0573 C | [2] | BOLT (3/8-16X2.75-IN) | |
| 22. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 23. | 6L-3616 | [10] | CONNECTOR | |
| 24. | 9W-5058 | [1] | TUBE AS | |
| 25. | 9W-5059 | [1] | TUBE AS | |
| 26. | 9W-5060 | [1] | TUBE AS | |
| 27. | 9W-5061 | [1] | TUBE AS | |
| 28. | 9W-5062 | [1] | TUBE AS | |
| 29. | 9S-4191 | [5] | PLUG (9/16-18-THD) | |
| 3J-1907 | [5] | SEAL-O-RING | ||
| 30. | 8M-4435 | [2] | SEAL-O-RING | |
| 31. | 2S-4958 | [1] | SLEEVE | |
| 32. | 0L-2072 | [1] | CLIP | |
| 4F-4879 | [1] | BOLT (3/8-16X0.5-IN) | ||
| 3V-3308 | [1] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 33. | 5K-9243 | [1] | ELBOW-FLARED | |
| 34. | 6K-6967 | [1] | ADAPTER-PIPE | |
| 35. | 7T-9738 | [1] | TUBE AS | |
| 36. | 8E-0590 C | [1] | TUBE AS | |
| 37. | 9G-2032 | [1] | TUBE AS | |
| 38. | 9G-2033 | [1] | TUBE AS | |
| 39. | 9G-2034 | [1] | TUBE AS | |
| 40. | 5K-9239 | [1] | CONNECTOR | |
| 41. | 2P-4439 | [1] | ADAPTER | |
| 42. | 5K-9238 C | [3] | CONNECTOR | |
| 43. | 9S-7720 | [1] | ELBOW-FLARED | |
| 44. | 6K-6826 C | [1] | ELBOW (45-DEG) | |
| 45. | 8E-0589 C | [1] | TUBE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP21660369
3G-9451: MOUNTING GP-CYLINDER
3G-9451 MOUNTING GP-CYLINDER
S/N 3TH1-UP; 5CH1-UP; 8BH1-UP; 8DH1-UP; 9LK1-UP
PART OF 6I-8344 BULLDOZER AR-ANGLING, 3A-8415, 8E-9323 BULLDOZER AR-SEMI-UNIVERSAL, 3A-8414 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
S/N 3TH1-UP; 5CH1-UP; 8BH1-UP; 8DH1-UP; 9LK1-UP
PART OF 6I-8344 BULLDOZER AR-ANGLING, 3A-8415, 8E-9323 BULLDOZER AR-SEMI-UNIVERSAL, 3A-8414 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-9405 | [4] | CAP AS | |
| (EACH INCLUDES) | ||||
| 2A. | 3G-9402 | [1] | BUSHING | |
| 3. | 4T-4875 | [2] | PIN | |
| 4. | 5P-2671 | [2] | SEAL-LIP TYPE | |
| 5. | 299-5344 | [2] | YOKE | |
| 6. | 6Y-9280 C | [2] | CLAMP (TAB) | |
| 7. | 6Y-9281 C | [2] | CLAMP (SLOT) | |
| 8. | 9N-4233 C | [2] | STRAP | |
| 9. | 5P-2566 C | [2] | BOLT (1/2-13X1.5-IN) | |
| 10. | 6V-8188 C | [2] | NUT (1/2-13-THD) | |
| 11. | 7X-2557 M | [8] | BOLT (M16X2X140-MM) | |
| 12. | 8T-2561 | [2] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 13. | 8T-4123 C | [2] | WASHER (3.62X5.75X0.375-MM THK) | |
| 14. | 8T-4137 CM | [2] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-4223 C | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
