HYDRAULIC SYSTEM
VALVE GP-SHUTTLEIMPLEMENTS
BRACE GPBULLDOZER GP
C-FRAME GP
LINKAGE GP
HYDRAULIC SYSTEM
VALVE GP-SHUTTLE
#SEBP21660410
4T-1860: VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
S/N 9LK1-UP
PART OF 4T-5133, 4T-5140, 6E-6029, 6E-6031 VALVE GP-CONTROL
ALSO AN ATTACHMENT
S/N 9LK1-UP
PART OF 4T-5133, 4T-5140, 6E-6029, 6E-6031 VALVE GP-CONTROL
ALSO AN ATTACHMENT
For full view, you need register
#SEBP21660411
4T-5348: BRACE GP-BULLDOZER
4T-5348 BRACE GP-BULLDOZER
S/N 8DH1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N 8DH1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-5495 | [2] | STUD-BALL | |
| 2. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 1U-0928 | [2] | SCREW-ADJUSTMENT | |
| 4. | 7X-0370 | [16] | BOLT (3/4-10X3.5-IN) | |
| 5. | 3J-6559 | [4] | CAP-BEARING | |
| 6. | 8E-9212 CB | [104] | SHIM (0.8-MM THK) | |
| 7. | 3J-1770 | [2] | LOCK PIN | |
| 8. | 4F-1252 | [2] | PIN | |
| 9. | 160-6306 | [2] | CAP-BEARING | |
| 10. | 7X-0368 | [4] | BOLT (3/4-10X3-IN) | |
| 11. | 8E-5701 CB | [52] | SHIM (0.8-MM THK) | |
| 12. | 1U-0929 | [2] | SCREW-ADJUSTMENT | |
| 13. | 3J-6573 | [2] | SCREW-ADJUSTMENT | |
| 14. | 1U-1176 | [2] | PIN | |
| 15. | 4F-0255 | [2] | PIN | |
| 16. | 3B-4627 | [2] | PIN-COTTER | |
| 17. | 1U-1267 | [2] | BRACE AS | |
| (EACH INCLUDES) | ||||
| 18. | 8J-4866 | [1] | LUG | |
| 19. | 6F-3908 | [1] | HANDLE | |
| 20. | 3F-4854 | [1] | KNOB | |
| 21. | 7T-4970 | [1] | ARM AS | |
| 22. | 7T-9146 | [1] | ARM AS | |
| (EACH ARM AS INCLUDES) | ||||
| 4B-4098 | [1] | PLUG-CUP | ||
| 23. | 1U-1174 | [1] | BRACKET (LH) | |
| 1U-1173 | [1] | BRACKET (RH) | ||
| 24. | 1U-1175 | [2] | PLATE | |
| 25. | 3Y-3866 | [1] | NUT (2-3/4-8-THD)(FOR USE WITH 4 PLATE ARM AS) | |
| -OR- | ||||
| 9J-9147 | [1] | NUT (2-3/4-8-THD)(FOR USE WITH 2 CHANNEL ARM AS) | ||
| 26. | 9W-0588 | [1] | BEARING (FOR USE WITH 4 PLATE ARM AS) | |
| -OR- | ||||
| 1U-1263 | [1] | BEARING (FOR USE WITH 2 CHANNEL ARM AS) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP21660412
6I-8344: BULLDOZER AR-ANGLING
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-1092 Y | [1] | BLADE GP-ANGLING | ||
| 4T-5348 Y | [1] | BRACE GP-BULLDOZER | ||
| 6I-8346 Y | [1] | C-FRAME GP | ||
| 9T-8952 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 9U-8593 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 3G-9451 Y | [1] | MOUNTING GP-CYLINDER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 4T-1753 Y | [1] | TRUNNION GP-BULLDOZER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21660413
6I-8345: BULLDOZER AR-ANGLING
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP21660414
3A-8415: BULLDOZER AR-SEMI-UNIVERSAL
3A-8415 BULLDOZER AR-SEMI-UNIVERSAL
S/N 3TH1-UP
FINE GRADING
AN ATTACHMENT
S/N 3TH1-UP
FINE GRADING
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-5203 Y | [1] | BLADE GP-SEMI-UNIVERSAL | ||
| 9T-8996 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 9U-8592 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 1U-2525 Y | [1] | LINES GP-TILT CYLINDER | ||
| 6Y-0949 Y | [1] | PUSH ARM GP | ||
| 3G-9451 Y | [1] | MOUNTING GP-CYLINDER | ||
| 3A-8438 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| UPPER RH CORNER OF BLADE | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21660415
8E-9323: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-9325 Y | [1] | BLADE GP-SEMI-UNIVERSAL | ||
| 9T-8952 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 9U-8593 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 6Y-5705 Y | [1] | LINES GP-TILT & TIP CYLINDER | ||
| 3G-9451 Y | [1] | MOUNTING GP-CYLINDER | ||
| 8E-9375 Y | [1] | PUSH ARM GP | ||
| 4T-1753 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21660416
8E-9324: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP21660417
3A-8414: BULLDOZER AR-STRAIGHT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-5186 Y | [1] | BLADE GP-STRAIGHT | ||
| 9T-8996 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 9U-8592 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 1U-2525 Y | [1] | LINES GP-TILT CYLINDER | ||
| 6Y-0949 Y | [1] | PUSH ARM GP | ||
| 3G-9451 Y | [1] | MOUNTING GP-CYLINDER | ||
| 3A-8438 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| UPPER RH CORNER OF BLADE | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21660418
6I-8346: C-FRAME GP
6I-8346 C-FRAME GP
S/N 8DH1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N 8DH1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0725 | [1] | RETAINER | |
| 2. | 8T-9398 | [2] | BOLT (3/4-10X1.75-IN) | |
| 3. | 160-6305 | [2] | CAP AS-BEARING | |
| 4T-4866 B | [52] | SHIM (0.8-MM THK) | ||
| 4. | 6Y-7471 | [1] | PIN-PIVOT | |
| 5. | 7X-0444 | [4] | BOLT (1-8X6.5-IN) | |
| 8T-5361 | [4] | WASHER-HARD (28X49X5-MM THK) | ||
| 6. | 4F-1204 | [4] | NUT (1-8-THD) | |
| 7. | 6I-8347 | [1] | C-FRAME AS | |
| 6F-2904 | [2] | BEARING AS | ||
| 8. | 6I-8410 | [1] | BRACKET AS (RH) | |
| 6I-8411 | [1] | BRACKET AS (LH) | ||
| (EACH BRACKET AS INCLUDES) | ||||
| 9. | 4J-2414 | [1] | TRUNNION | |
| 10. | 7T-9586 | [6] | BEARING | |
| 11. | 8P-9770 | [1] | PLATE | |
| 12. | 9W-4897 | [6] | BRACKET AS | |
| (EACH BRACKET AS INCLUDES) | ||||
| 8F-4387 | [2] | PLATE | ||
| 13. | 9W-5375 | [2] | BAR | |
| 14. | 9W-9000 | [1] | ADAPTER AS | |
| 5M-6214 | [1] | PLUG (1/8-27 PTF) | ||
| 8E-5486 | [2] | BUSHING | ||
| 15. | 9V-0321 | [1] | BLOCK | |
| B | USE AS REQUIRED | |||
#SEBP21660419
8E-2305: LINKAGE GP-IMPLEMENT
8E-2305 LINKAGE GP-IMPLEMENT
S/N 9LK1-UP
PART OF 9W-3525 INSTALLATION AR-WINCH
Type 1
AN ATTACHMENT
S/N 9LK1-UP
PART OF 9W-3525 INSTALLATION AR-WINCH
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6H XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8P-3205 | [1] | LEVER | |
| 2. | 1B-8706 | [2] | KEY-WOODRUFF | |
| 3. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 4. | 8Y-0736 | [1] | LEVER | |
| 5. | 6K-0095 | [1] | LEVER | |
| 6. | 4L-9337 | [6] | BOLT (3/8-16X1.5-IN) | |
| 7. | 2K-4973 C | [4] | LOCKNUT (3/8-16-THD) | |
| 8. | 8Y-0735 | [1] | SUPPORT | |
| 9. | 8T-4896 C | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 6V-8801 C | [4] | NUT (3/8-16-THD) | |
| 11. | 5G-8209 | [1] | LEVER | |
| 12. | 8T-4835 | [1] | BOLT (1/2-13X2-IN) | |
| 13. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 14. | 1B-8704 | [1] | KEY-WOODRUFF | |
| 15. | 2K-0400 | [1] | END-YOKE ROD | |
| 16. | 1B-0676 | [1] | PIN | |
| 17. | 3B-4617 | [1] | PIN-COTTER | |
| 18. | 9H-7089 | [1] | ROD END | |
| 5G-8211 | [1] | LEVER | ||
| 3S-2713 | [1] | NUT-FULL (3/8-24-THD) | ||
| 19. | 8C-6561 | [1] | BOLT (5/16-18X1.375-IN) | |
| 1A-2812 | [1] | WASHER (0.06-MM THK) | ||
| 20. | 6T-7163 | [1] | SEAL-DOMED | |
| 21. | 6T-7162 | [1] | SEAL-DOMED | |
| 22. | 3G-8856 | [1] | WASHER (17X30X5-MM THK) | |
| 23. | 3T-9345 | [1] | BRACKET | |
| 24. | 2B-0941 C | [2] | SPACER (10.5X19X19-MM THK) | |
| 25. | 9U-8993 C | [1] | BAR AS | |
| 26. | 6T-2411 | [1] | GUIDE | |
| 27. | 4J-3044 | [2] | BEARING AS-NEEDLE | |
| 28. | 8T-0741 | [4] | SEAL-LIP TYPE | |
| 29. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 30. | 5S-7383 C | [1] | BOLT (3/8-16X1.75-IN) | |
| 31. | 3P-3676 C | [1] | CLAMP | |
| 32. | 4D-4064 C | [1] | ROD END (3/8-24-THD) | |
| 33. | 6V-2866 C | [3] | SPACER | |
| 34. | 8T-8915 C | [1] | BOLT (3/8-16X3.25-IN) | |
| 35. | 8T-9101 C | [1] | BOLT (3/8-16X2.75-IN) | |
| 36. | 8Y-0734 | [1] | SHAFT | |
| 37. | 3B-4629 | [1] | PIN-COTTER | |
| 38. | 7X-0521 | [2] | WASHER-HARD (20X36.5X5-MM THK) | |
| 39. | 8T-1177 | [4] | BEARING-ROLLER | |
| 40. | 8F-7702 | [4] | SEAL-LIP TYPE | |
| 41. | 9U-9148 C | [2] | ROD | |
| 42. | 4D-4064 C | [3] | ROD END (3/8-24-THD) | |
| 43. | 6V-8183 C | [8] | NUT-FULL (3/8-24-THD) | |
| 44. | 9W-9687 C | [4] | STUD | |
| 45. | 3L-5389 | [2] | TIE ROD | |
| 46. | 2L-6267 C | [3] | LOCKNUT (3/8-24-THD) | |
| 47. | 3S-2713 | [4] | NUT-FULL (3/8-24-THD) | |
| 48. | 5J-5315 | [3] | ROD END | |
| 49. | 6V-2866 C | [2] | SPACER | |
| 50. | 5S-7383 C | [1] | BOLT (3/8-16X1.75-IN) | |
| 51. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
