AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E-2305 LINKAGE GP-IMPLEMENT S/N 9LK1-UP PART OF 9W-3525 INSTALLATION AR-WINCH Type 2 AN ATTACHMENT D6H XL


IMPLEMENTS
LINKAGE GP
BULLDOZER GP
OPERATOR STATION
SEAT GP
AIR CONDITIONER GP

TRACK-TYPE TRACTOR D6H XL TRACK-TYPE TRACTOR 9LK
 D6H XL Series II Track-Type Tractor 9LK00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2166 D6H XL 9LK   (1992)

IMPLEMENTS

LINKAGE GP
LINKAGE GP-IMPLEMENT
8E-2305 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8E-2305 LINKAGE GP-IMPLEMENT
 

#SEBP21660420
 

8E-2305: LINKAGE GP-IMPLEMENT

8E-2305 LINKAGE GP-IMPLEMENT
S/N 9LK1-UP
PART OF 9W-3525 INSTALLATION AR-WINCH
Type 2
AN ATTACHMENT
i01286327 SEBP2166
8E2305 LINKAGE GP-IMPLEMENT Parts scheme 8E2305 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-3205 [1] LEVER  
2. 1B-8706 [2] KEY-WOODRUFF  
3. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
4. 8Y-0736 [1] LEVER  
5. 6K-0095 [1] LEVER  
6. 4L-9337 C [5] BOLT (3/8-16X1.5-IN)  
7. 2K-4973 [5] LOCKNUT (3/8-16-THD)  
8. 8Y-0735 [1] SUPPORT  
9. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-8801 [4] NUT (3/8-16-THD)  
11. 5G-8209 [1] LEVER  
12. 8T-4835 [1] BOLT (1/2-13X2-IN)  
13. 6V-8188 [1] NUT (1/2-13-THD)  
14. 1B-8704 [1] KEY-WOODRUFF  
15. 2K-0400 [1] END-YOKE ROD  
16. 1B-0676 [1] PIN  
17. 3B-4617 [1] PIN-COTTER  
18. 6V-2866 C [4] SPACER  
19. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
  1A-2812 [1] WASHER (0.06-MM THK)  
20. 6T-7163 [1] SEAL-DOMED  
21. 6T-7162 [1] SEAL-DOMED  
22. 3G-8856 [1] WASHER (17X30X5-MM THK)  
23. 3T-9345 [1] BRACKET  
24. 3P-3676 [1] CLAMP  
25. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
26. 6T-2411 [1] GUIDE  
27. 4J-3044 [2] BEARING AS-NEEDLE  
28. 8T-0741 [4] SEAL-LIP TYPE  
29. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
30. 8T-8915 [1] BOLT (3/8-16X3.25-IN)  
  2B-0941 [2] SPACER (10.5X19X19-MM THK)  
31. 5G-8210 [1] LEVER AS  
32. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
33. 5G-8211 [1] LEVER  
34. 9H-7089 [1] ROD END  
35. 9U-8993 [1] BAR AS  
36. 8T-9101 [1] BOLT (3/8-16X2.75-IN)  
37. 8T-9377 C [1] BOLT (3/8-16X2.25-IN)  
38. 9G-8661 C [1] SPACER (10X16X20-MM THK)  
39. 3B-4629 [1] PIN-COTTER  
40. 7X-0521 [2] WASHER-HARD (20X36.5X5-MM THK)  
41. 8T-1177 [4] BEARING-ROLLER  
42. 8F-7702 [4] SEAL-LIP TYPE  
43. 9U-9148 [2] ROD  
  9W-9687 [4] STUD  
  6V-8183 [4] NUT-FULL (3/8-24-THD)  
44. 5J-5315 [3] ROD END  
45. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
46. 3S-2713 [4] NUT-FULL (3/8-24-THD)  
47. 8Y-0734 [1] SHAFT  
48. 2L-6267 [3] LOCKNUT (3/8-24-THD)  
49. 3L-5389 [2] TIE ROD  
50. 4D-4064 [4] ROD END (3/8-24-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21660421
 

6Y-0949: PUSH ARM GP

6Y-0949 PUSH ARM GP
S/N 3TH1-UP; 5CH1-UP
CONVENTIONAL
PART OF 3A-8415 BULLDOZER AR-SEMI-UNIVERSAL, 3A-8414 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00388003 SEBP2166
6Y0949 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-6305 C [2] CAP AS-BEARING  
2. 7X-0444 [4] BOLT (1-8X6.5-IN)  
  4F-1204 [4] NUT (1-8-THD)  
3. 4T-1522 [1] PUSH ARM AS (RH)  
4. 9W-2580 [1] BEARING  
5. 9W-2579 [2] PLATE  
6. 8P-9770 [1] PLATE  
7. 9W-9165 [1] BEARING  
8. 4T-0732 [1] BRACKET  
9. 1U-2533 [1] BAR  
10. 1U-3991 Y [1] CYLINDER GP-TILT  
11. 3F-6185 [2] PIN (LARGE)  
  4F-0255 [2] PIN (SMALL)  
  3B-4627 [2] PIN-COTTER  
12. 8J-2880 [3] CAP AS-BEARING  
13. 7X-0375 [8] BOLT (3/4-10X5-IN)  
  4F-2710 [8] NUT (3/4-10-THD)  
14. 7X-0372 [6] BOLT (3/4-10X4.25-IN)  
  8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
15. 4T-1520 [1] CAGE AS  
  6J-5383 [1] BEARING  
16. 6V-8182 [10] NUT (3/4-10-THD)  
17. 8E-5703 B [78] SHIM (0.8-MM THK)  
18. 4T-1521 [1] PUSH ARM AS (LH)  
19. 4T-0780 [1] TRUNNION  
20. 9U-9341 [1] BRACKET  
21. 9W-9165 [1] BEARING  
22. 1U-2533 [1] BAR  
23. 9W-2580 [1] BEARING  
24. 8P-9770 [1] PLATE  
25. 124-9672 [1] BRACE AS-TILT  
  8E-2887 [1] YOKE  
26. 4T-4866 B [52] SHIM (0.8-MM THK)  
27. 7X-0373 [4] BOLT (3/4-10X5.5-IN)  
28. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
29. 7X-0582 [6] WASHER-HARD (20X44.5X6-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21660422
 

8E-9375: PUSH ARM GP

8E-9375 PUSH ARM GP
S/N 8BH1-UP
PART OF 8E-9323, 8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00417186 SEBP2166
8E9375 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-9672 [1] BRACE AS-TILT  
2. 8E-2887 [1] YOKE  
3. 4T-4866 B [52] SHIM (0.8-MM THK)  
4. 8E-5703 B [78] SHIM (0.8-MM THK)  
5. 160-6305 [2] CAP AS-BEARING  
6. 8J-2880 [3] CAP AS-BEARING  
7. 8E-9365 [1] PUSH ARM AS (RH)  
8. 9W-2580 [1] BEARING  
9. 9W-9165 [1] BEARING  
10. 9W-2579 [2] PLATE  
11. 8P-9770 [1] PLATE  
12. 1U-2533 [1] BAR  
13. 4T-0732 [1] BRACKET  
14. 7X-0444 [4] BOLT (1-8X6.5-IN)  
15. 4F-1204 [4] NUT (1-8-THD)  
16. 7X-0373 [4] BOLT (3/4-10X5.5-IN)  
17. 6V-8182 [10] NUT (3/4-10-THD)  
18. 7X-0375 [8] BOLT (3/4-10X5-IN)  
19. 4F-2710 [8] NUT (3/4-10-THD)  
20. 7X-0372 [6] BOLT (3/4-10X4.25-IN)  
21. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
22. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
23. 7X-0582 [6] WASHER-HARD (20X44.5X6-MM THK)  
24. 8E-9366 [1] PUSH ARM AS (LH)  
25. 9W-2580 [1] BEARING  
26. 9W-9165 [1] BEARING  
27. 124-9666 [1] BRACKET  
28. 8P-9770 [1] PLATE  
29. 1U-2533 [1] BAR  
30. 4T-0780 [1] TRUNNION  
31. 3F-6185 [9] PIN  
32. 4F-0255 [2] PIN  
33. 3B-4626 [2] PIN-COTTER  
34. 4T-1520 [1] CAGE AS  
  6J-5383 [1] BEARING  
35. 1U-3991 Y [1] CYLINDER GP-TILT  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP21660423
 

3A-8438: TRUNNION GP-BULLDOZER

3A-8438 TRUNNION GP-BULLDOZER
S/N 3TH1-UP; 5CH1-UP
PART OF 3A-8415 BULLDOZER AR-SEMI-UNIVERSAL, 3A-8414 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00362789 SEBP2166
3A8438 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3A-8437 [2] TRUNNION AS  
2. 8T-9399 [24] BOLT (3/4-10X2.25-IN)  
  8T-4994 [24] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP21660424
 

4T-1753: TRUNNION GP-BULLDOZER

4T-1753 TRUNNION GP-BULLDOZER
S/N 8BH1-UP; 8DH1-UP; 9LK1-UP
PART OF 6I-8344, 6I-8345 BULLDOZER AR-ANGLING, 8E-9323, 8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00375420 SEBP2166
4T1753 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4103 [2] TRUNNION  
2. 8T-9399 [20] BOLT (3/4-10X2.25-IN)  
 

#SEBP21660425
 

6W-8505: ADJUSTER GP-SEAT

6W-8505 ADJUSTER GP-SEAT
S/N 9LK1-UP
PART OF 6W-8502 SUSPENSION GP-SEAT
i00411101 SEBP2166
6W8505 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8V-4881 [4] ROLLER  
2. 4V-7860 [1] LEVER  
3. 6W-8506 [1] HOUSING AS (LOWER)  
4. 4V-7850 [1] PLATE-SLIDE TRACK  
5. 4V-7855 [1] LATCH AS  
6. 4V-7881 [1] ROD-LATCH  
7. 4V-8256 [2] SPRING  
8. 013-8289 [1] BOLT (1/2-13X0.75-IN)  
9. 4V-7859 [1] ROD-LATCH  
10. 4V-7857 [1] LATCH AS  
11. 5V-1497 [7] RETAINER  
12. 1B-6182 [1] SPACER (13.11X19.05X1.18-MM THK)  
13. 4V-7865 [1] CAP  
 

#SEBP21660426
 

106-9655: AIR CONDITIONER AR

106-9655 AIR CONDITIONER AR
S/N 9LK1-99999
R134A REFRIGERANT
AN ATTACHMENT
i01065644 SEBP2166
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  106-4003 Y [1] AIR CONDITIONER GP  
  106-7634 Y [1] COMPRESSOR GP-REFRIGERANT  
  107-3750 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  106-9656 Y [1] LINES GP-AIR CONDITIONER  
   
  110-6393 [1] PLATE-INSTRUCTION (AIR CONDITIONER)  
    ON LH SIDE OF DASH ABOVE LOUVRE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21660427
 

8E-8329: AIR CONDITIONER AR

8E-8329 AIR CONDITIONER AR
S/N 9LK1-UP
CANNOT BE USED WITH FAN GP-REVERSIBLE
AN ATTACHMENT
i00416087 SEBP2166
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  100-4976 Y [1] AIR CONDITIONER GP  
  7C-8433 Y [1] COMPRESSOR GP-REFRIGERANT  
  7E-5651 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  8E-7798 Y [1] LINES GP-AIR CONDITIONER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21660428
 

100-4976: AIR CONDITIONER GP

100-4976 AIR CONDITIONER GP
S/N 9LK1-UP
PART OF 8E-8329 AIR CONDITIONER AR
AN ATTACHMENT
i00460632 SEBP2166
1004976 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-9555 [1] GROMMET  
2. 5P-5643 D SEAL  
3. 3T-9473 [1] COIL-EVAPORATOR  
4. 2V-0099 [1] KNOB-CONTROL  
5. 2G-0401 [1] VALVE  
  6M-5062 [1] SEAL-O-RING  
6. 1V-3113 [1] CLIP  
  2A-3211 [1] WASHER (5.5X12.3X0.8-MM THK)  
  7S-4346 [1] SCREW-MACHINE (10-32X0.5-IN)  
7. 8P-6355 [1] CLIP  
  5P-7070 BE INSULATION-STRIP  
8. 9W-1828 [1] PANEL AS  
  6T-5600 [4] BOSS  
  3E-3037 [1] FILM-FACE (BLOWER, TEMPERATURE CONTROL)  
9. 8F-7219 [1] SEAL-O-RING  
10. 3E-5465 [1] THERMOSTAT (CAB AIR)(COOLING)  
11. 2P-4339 [1] NUT-JAM (7/16-28-THD)  
12. 2V-1937 [1] GROMMET  
13. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
14. 5P-5992 E HOSE (10 CM LG)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP21660429
 

106-4003: AIR CONDITIONER GP

106-4003 AIR CONDITIONER GP
S/N 9LK1-UP
PART OF 106-9655 AIR CONDITIONER AR
AN ATTACHMENT
i01065740 SEBP2166
1064003 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your D6H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-7706 [1] COIL-EVAPORATOR  
2. 2V-1937 B [2] GROMMET  
3. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 5P-5643 BD SEAL  
5. 2P-4339 [1] NUT-JAM (7/16-28-THD)  
6. 2V-0099 [1] KNOB-CONTROL  
7. 3E-5465 [1] THERMOSTAT (CAB AIR)  
8. 1V-3113 [1] CLIP  
  7S-4346 [1] SCREW-MACHINE (10-32X0.5-IN)  
  2A-3211 [1] WASHER (5.5X12.3X0.8-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

Information:

Caterpillar Parts SIS Catalog D6H XL :

LINKAGE GP-IMPLEMENT
8E-2305 LINKAGE GP-IMPLEMENT
C-FRAME GP
6I-8346 C-FRAME GP
3A-8414 BULLDOZER AR-STRAIGHT
8E-9324 BULLDOZER AR-SEMI-UNIVERSAL
8E-9323 BULLDOZER AR-SEMI-UNIVERSAL
3A-8415 BULLDOZER AR-SEMI-UNIVERSAL
6I-8345 BULLDOZER AR-ANGLING
6I-8344 BULLDOZER AR-ANGLING
PUSH ARM GP
6Y-0949 PUSH ARM GP
PUSH ARM GP
8E-9375 PUSH ARM GP
TRUNNION GP-BULLDOZER
3A-8438 TRUNNION GP-BULLDOZER
TRUNNION GP-BULLDOZER
4T-1753 TRUNNION GP-BULLDOZER
ADJUSTER GP-SEAT
6W-8505 ADJUSTER GP-SEAT
106-9655 AIR CONDITIONER AR
8E-8329 AIR CONDITIONER AR
AIR CONDITIONER GP
100-4976 AIR CONDITIONER GP

Truck sale:

1994 CAT D6H XL
Call 
1994 CAT D6H XL

Chown Equipment Ltd.
1996 CAT D6H XL
USD $29,000 
1996 CAT D6H XL

Michigan CAT
Novi, Michigan
 
Call 
1993 CAT D6H XL

Heavy Equipment, Loaders & Parts, Inc
Lebanon, Pennsylvania
1994 CAT D6H XL
USD $41,340 
1994 CAT D6H XL

BIG MACHINERY BV
Velddriel, The Netherlands
1996 CAT D6H XL
USD $55,000 
1996 CAT D6H XL

Clark Heavy Equipment
Pleasureville, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.