1006179 GOVERNOR GP-UNIT INJECTOR 7E8794-PAGE 62 PART OF 4P5731 GOVERNOR 910E COMPACT WHEEL LOADER

FUEL SYSTEM

GOVERNOR GP

0. 100-6179 GOVERNOR G
1. 131-4852 GOVERNOR G
2. 7E-8794 DRIVE GP-G
3. 7W-8434 LINES GP-G

CONTROL GP-GOVERNOR

4. 7E-9429 CONTROL GP

CONTROL GP-FUEL INJECTION

5. 7W-8600 CONTROL GP

GOVERNOR GP

6. 4P-5748 KIT-GOVERN

PUMP GP-FUEL INJECTION

7. 7E-3423 PUMP GP-FU
8. 7E-3423 PUMP GP-FU

OPERATOR STATION

PEDAL GP

9. 9C-9138 PEDAL GP-G
0. INFORMATION

COMPACT WHEEL LOADER 910E COMPACT WHEEL LOADER 1SF
910F WHEEL LOADER 1SF01104-UP (MACHINE) POWERED BY 3114 ENGINE SEBP2178 910E 1SF (1989)

FUEL SYSTEM

GOVERNOR GP

4P-5731 GOVERNOR GP-UNIT INJECTOR

4P-5503 GOVERNOR GP-UNIT INJECTOR

100-6179 GOVERNOR GP-UNIT INJECTOR

131-4852 GOVERNOR GP-UNIT INJECTOR

7E-8794 DRIVE GP-GOV & TRANSFER PUMP

7W-8434 LINES GP-GOVERNOR OIL

#SEBP21780090

100-6179: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

1006179 GOVERNOR GP-UNIT INJECTOR
7E8794-PAGE 62
PART OF 4P5731 GOVERNOR

c630535 SEBP2178

1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1460	[1]	RING-RETAINING
2.	108-1612	[1]	CLEVIS
3.	6D-9953	[1]	PIN-SPRING
4.	7C-8854	[1]	PIN-CLEVIS
5.	115-2553	[1]	VALVE-GOVERNOR SERVO
6.	8C-3312	[1]	RING-RETAINING
7.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
8.	5P-9757	[1]	SEAL-O-RING
9.	108-1613	[1]	PISTON-SERVO
10.	125-8158	[1]	SLEEVE-RACK CONTROL
11.	9Y-1837	[1]	SPRING
12.	8T-7069	[1]	RING-RETAINING
13.	117-9098	[1]	SLEEVE-LIMITING
14.	7N-2171	[1]	RING-RETAINING
15.	114-1803 C	[1]	LEVER AS
16.	Z	[1]	PIN
17.	Z	[2]	SWIVEL
18.	Z	[1]	LEVER
19.	7W-5594	[1]	SHAFT AS-PIVOT
20.	Z	[1]	PIN
21.	7C-5480	[1]	SPRING-TORSION
22.	7C-8640	[1]	SPRING-CAM
23.	123-6433	[1]	ARBOR AS-TORQUE CAM
24.	8T-8895 M	[1]	SETSCREW-SOCKET
25.	7E-3216	[1]	BLOCK AS-BEARING
26.	6F-5933	[2]	BEARING-NEEDLE
27.	7E-3217	[1]	LEVER AS
28.	Z	[1]	SWIVEL
29.	8C-8546 M	[9]	BOLT-SOCKET HEAD
30.	3P-3547	[1]	RING-RETAINING
31.	4P-5743	[1]	LEVER AS-LIMIT
32.	Z	[1]	PIN
33.	Z	[1]	LEVER-TORQUE
34.	7C-6205	[1]	PLUG
35.	6V-8189	[1]	NUT
36.	115-1192	[1]	SEAL-GOVERNOR HOUSING
37.	3T-0849 M	[6]	BOLT-SOCKET HEAD
38.	7W-4313	[1]	WASHER
39.	6I-4514	[1]	HOUSING AS
40.	Z	[1]	SHAFT
41.	Z	[1]	PLUG
42.	8T-6702 M	[1]	SETSCREW-SOCKET
43.	5C-2874 M	[2]	NUT
44.	7C-6204	[1]	PLUG
45.	7L-3386	[1]	SEAL-O-RING
46.	7C-5884	[1]	COVER-OIL SUMP
47.	6V-5213 M	[3]	BOLT-SOCKET HEAD
48.	4P-3539	[1]	LEVER-THROTTLE
49.	8T-5435 M	[1]	BOLT
50.	1N-3887 C	[1]	SETSCREW-SOCKET
51.	7C-4483	[1]	SCREEN AS
52.	6V-5100	[1]	SEAL-O-RING
53.	4P-4231	[1]	COVER-REAR
54.	Z	[1]	PLUG
55.	4P-3537	[1]	RING-TOLERANCE
56.	8T-0269 M	[3]	BOLT-SOCKET HEAD
57.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
58.	7C-5150	[1]	PIN
59.	4P-0737	[1]	SHAFT-RISER
60.	7C-5148	[1]	CARRIER-FLYWEIGHT
61.	9X-2547 M	[2]	SCREW-FLAT HEAD
62.	2S-7316	[2]	DOWEL
63.	6V-7699	[4]	WASHER-HARD
64.	8C-8545 M	[4]	BOLT-SOCKET HEAD
65.	7C-5541	[2]	TOE-FLYWEIGHT
66.	7W-8993	[2]	WEIGHT
67.	8C-5061	[1]	RING-RETAINING
68.	7C-2743	[2]	RACE
69.	7W-5561	[1]	BEARING-THRUST
70.	7W-1440 B	[8]	SHIM
71.	4P-8947	[1]	RISER
72.	4P-8948	[1]	SEAT AS-SPRING
73.		[1]	INSERT
74.	7C-3776	[1]	PISTON AS
75.	4N-6407	[1]	SPOOL-DASHPOT
76.	4N-6406	[1]	RING-SPACER
77.	4N-6404	[1]	RING-RETAINING
78.	7W-5591	[1]	SEAT-GOVERNOR SPRING
79.	7C-5883 B	[7]	SHIM
80.	7C-5885	[1]	WASHER
81.	4P-4000	[1]	SPRING-LEVER
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#SEBP21780091

131-4852: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

1314852 GOVERNOR GP-UNIT INJECTOR
7E8794-PAGE 62
PART OF 4P5731 GOVERNOR

c702253 SEBP2178

1314852 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1460	[1]	RING-RETAINING
2.	108-1612	[1]	CLEVIS
3.	6D-9953	[1]	PIN-SPRING
4.	7C-8854	[1]	PIN-CLEVIS
5.	115-2553	[1]	VALVE-GOVERNOR SERVO
6.	8C-3312	[1]	RING-RETAINING
7.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
8.	5P-9757	[1]	SEAL-O-RING (18.77MM ID)
9.	108-1613	[1]	PISTON-SERVO
10.	125-8158	[1]	SLEEVE-RACK CONTROL
11.	9Y-1837	[1]	SPRING
12.	8T-7060	[1]	RING-RETAINING
13.	117-9098	[1]	SLEEVE-LIMITING
14.	7N-2171	[1]	RING-RETAINING
15.	114-1803	[1]	LEVER AS
16.	Z	[1]	PIN
17.	Z	[2]	SWIVEL
18.	Z	[1]	LEVER
19.	7W-5594	[1]	SHAFT AS-PIVOT
20.	Z	[1]	PIN
21.	7C-5480	[1]	SPRING-TORSION
22.	7C-8640	[1]	SPRING-CAM
23.	123-6433	[1]	ARBOR AS-TORQUE CAM
24.	8T-8895 M	[1]	SETSCREW-SOCKET
25.	7E-3216	[1]	BLOCK AS-BEARING
26.	6F-5933	[2]	BEARING-NEEDLE
27.	7E-3217	[1]	LEVER AS
28.	Z	[1]	SWIVEL
29.	8C-8546 M	[9]	BOLT-SOCKET HEAD
30.	3P-3547	[1]	RING-RETAINING
31.	4P-5743	[1]	LEVER AS-LIMIT
32.	Z	[1]	PIN
33.	Z	[1]	LEVER-TORQUE
34.	7C-6205	[1]	PLUG
35.	6V-8189	[1]	NUT (5/16-18 THD)
36.	115-1192	[1]	SEAL-GOVERNOR HOUSING
37.	3T-0849 M	[6]	BOLT-SOCKET HEAD (7.59MM'ID)
38.	7W-4313	[1]	WASHER
39.	6I-4514	[1]	HOUSING AS
40.	2S-4078	[1]	SEAL-O-RING (37.46MM ID)
41.	4P-4000	[1]	SPRING-LEVER
42.	8T-6702 M	[1]	SETSCREW-SOCKET
43.	5C-2874 M	[2]	NUT (M5X.8 THD)
44.	7C-6204	[1]	PLUG
45.	7L-3386	[1]	SEAL-O-RING
46.	7C-5884	[1]	COVER-OIL SUMP
47.	6V-5213 M	[3]	BOLT-SOCKET HEAD
48.	4P-3539	[1]	LEVER-THROTTLE
49.	8T-5435 M	[1]	BOLT
50.	1N-3887	[1]	SETSCREW-SOCKET
51.	7C-4483	[1]	SCREEN AS
52.	6V-5100	[1]	SEAL-O-RING (53.64MM ID)
53.	4P-4231	[1]	COVER-REAR
54.	7C-5885	[1]	WASHER
55.	4P-3537	[1]	RING-TOLERANCE
56.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M16X1X20MM)
57.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
58.	7C-5150	[1]	PIN
59.	4P-0737	[1]	SHAFT-RISER
60.	7C-5148	[1]	CARRIER-FLYWEIGHT
61.	9X-2547 M	[2]	SCREW-FLAT HEAD
62.	2S-7316	[2]	DOWEL
63.	6V-7699	[4]	WASHER-HARD (1.6MM THK)
64.	8C-8545 M	[4]	BOLT-SOCKET HEAD
65.	7C-5541	[2]	TOE-FLYWEIGHT
66.	7W-8993	[2]	WEIGHT
67.	8C-5061	[1]	RING-RETAINING
68.	7C-2743	[2]	RACE
69.	7W-5561	[1]	BEARING-THRUST
70.	7W-1440 B	[8]	SHIM
71.	4P-8947	[1]	RISER
72.	4P-8948	[1]	SEAT AS-SPRING
73.		[1]	INSERT
74.	7C-3776	[1]	PISTON AS
75.	4N-6407	[1]	SPOOL-DASHPOT
76.	4N-6406	[1]	RING-SPACER
77.	4N-6404	[1]	RING-RETAINING
78.	7W-5591	[1]	SEAT-GOVERNOR SPRING
79.	7C-5883 B	[7]	SHIM
80.	109-4587	[1]	RING
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#SEBP21780092

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

DRIVE GP-GOV & TRANSFER PUMP

7E8794 DRIVE GP-GOVERNOR & TRANSFER PUMP
PART OF 4P5503, 1006179 & 1314852 GOVERNOR-UNIT INJECTOR

c572096 SEBP2178

7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5612	[1]	HOUSING AS-FRONT
	7S-5005	[2]	DOWEL
	7S-6798	[1]	SEAL-LIP TYPE
	9Y-3107 M	[1]	BOLT
2.		[1]	SPRING-TORSION
3.	4P-9490	[1]	SHAFT AS-SHUT-OFF
	4P-9489	[1]	SHAFT-SHUT OFF
	4P-9491	[1]	SHIM-SHUT OFF
	4P-9492	[1]	BRACKET-SHAFT
	4P-9493	[1]	LEVER-SHUT OFF
	4P-9494	[1]	SPRING-SHUT OFF
	105-0585	[1]	LEVER-SHUT-OFF
	9X-8902 M	[4]	BOLT-SOCKET HEAD
4.	6V-5213 M	[2]	BOLT-SOCKET HEAD
5.	7W-5615	[1]	SLEEVE AS-PUMP
	1W-0565	[1]	RING-RETAINING
6.	4D-9986	[2]	SEAL-O-RING
7.	4P-3953	[1]	PISTON AS
8.	7E-0156	[1]	FITTING-INLET
9.	4P-4224	[1]	COVER-TRANSFER PUMP
10.	7C-5294	[1]	SPRING
11.	8C-6364 M	[3]	BOLT-SOCKET HEAD
12.	7E-9898	[1]	CONNECTOR-ORIFICE
13.	3J-1907	[2]	SEAL-O-RING
14.	7W-7383	[2]	VALVE AS-CHECK
15.	7E-3943	[1]	LEVER-CONTROL
16.	9Y-9846 M	[1]	SCREW-LOCATING
17.	6L-8598	[2]	RING-RETAINING
18.	4P-3538	[1]	SHAFT-THROTTLE
19.	7E-3944	[1]	SLEEVE
	M		METRIC PART

#SEBP21780093

7W-8434: LINES GP-GOVERNOR OIL

LINES GP-GOVERNOR OIL

7W8434 LINES GP-GOVERNOR OIL
PART OF 4P5527 GOVERNOR-UNIT INJECTOR

c494156 SEBP2178

7W8434 LINES GP-GOVERNOR OIL Parts scheme

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8628	[1]	ELBOW
2.	3J-7354	[2]	SEAL-O-RING (8.92MM ID)
3.	6V-8647	[1]	CONNECTOR-SEAL
4.	7W-0367	[1]	TUBE AS
5.	4J-5477	[2]	SEAL-O-RING (8.61MM ID)

#SEBP21780094

7E-9429: CONTROL GP-GOVERNOR

CONTROL GP-GOVERNOR

7E9429 CONTROL GP-GOVERNOR

c519979 SEBP2178

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0484	[1]	LEVER AS
2.	6I-0483	[2]	SPRING
3.	6I-0482	[1]	LEVER AS
4.	5C-9553 M	[1]	BOLT
	6V-7646	[1]	WASHER-HARD
5.	8C-8451 M	[1]	BOLT
	8T-2228	[1]	WASHER-HARD
	M		METRIC PART

#SEBP21780095

7W-8600: CONTROL GP-FUEL INJECTION

CONTROL GP-FUEL INJECTION

7W8600 CONTROL GP-FUEL INJECTION

c550822 SEBP2178

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-9048	[1]	CONTROL AS-FUEL
2.	6V-5683 M	[3]	BOLT
	M		METRIC PART

#SEBP21780096

4P-5748: KIT-GOVERNOR

KIT-GOVERNOR

4P5748 KIT-GOVERNOR
AN ATTACHMENT

SEBP21780096 SEBP2178

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-8546	[1]	BOLT-SOCKET HEAD

4P-0718	[1]	CLIP-CLEVIS

7W-5560	[1]	LEVER AS-RISER

8T-1460	[1]	RING-RETAINING
9X-2315	[1]	RING-RETAINING
3P-3547	[1]	RING-RETAINING

7W-5614	[1]	SEAL-GOVERNOR HOUSING
1T-1068	[1]	SEAL-O-RING
3J-1907	[2]	SEAL-O-RING
6V-8397	[2]	SEAL-O-RING
4J-5477	[2]	SEAL-O-RING
8T-7050	[1]	SETSCREW-SOCKET
4P-5605	[1]	SHIM (0.5MM THK)
9Y-1837	[1]	SPRING

#SEBP21780097

7E-3423: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

7E3423 PUMP GP-FUEL INJECTION
TYPE 2. S/N 2ZF4200-UP

c630972 SEBP2178

7E3423 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-8442 MC	[1]	BOLT-SOCKET HEAD (M6X1X30)
2.	127-8205 C	[1]	INJECTOR GP-FUEL
3.	114-8718	[1]	SEAL-O-RING (26.64MM ID)
4.	125-8274	[1]	SEAL-O-RING (7.59MM ID)
5.	9X-8267 C	[1]	WASHER
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP21780098

7E-3423: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

7E3423 PUMP GP-FUEL INJECTION
TYPE 1. S/N 2ZF4200-UP

c485025 SEBP2178

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-0849 M	[1]	BOLT-SOCKET HEAD
2.	7E-8729 R	[1]	INJECTOR GP-FUEL
3.	6V-6228	[1]	SEAL-O-RING
4.	032-8970	[1]	SEAL-O-RING
	M		METRIC PART
	R		REMFG PART MAY BE AVAILABLE

#SEBP21780099

9C-9138: PEDAL GP-GOVERNOR

PEDAL GP-GOVERNOR

9C9138 PEDAL GP-GOVERNOR

c569451 SEBP2178

For full view, you need register

Parts for your 910E COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5G-7333	[1]	PEDAL AS
	8R-7038	[1]	TREAD
2.	3B-4615	[1]	PIN-COTTER
3.	8T-4185 M	[3]	BOLT (M10X1.50X50MM)
	3V-2431	[2]	WASHER (16MM OD)
4.	8T-4121	[6]	WASHER (21MM OD)
5.	8T-4133 M	[6]	NUT (M10X1.50 THD)
6.	5G-2514	[2]	TUBE
7.	8T-6431	[2]	ROD END-BEARING
8.	5G-7334	[1]	BOOT
9.	8T-4137 M	[2]	BOLT (M10X1.50X20MM)
10.	5G-7335	[1]	ROD
11.	5G-7336	[1]	LEVER
12.	8T-5063	[1]	ROD END
13.	8C-4987	[1]	PIN-CLEVIS
14.	8R-1425	[1]	BRACKET AS
15.	2D-6006	[1]	PIN
16.	3B-4611	[1]	PIN
	M		METRIC PART

Information:

FUEL SYSTEM

GOVERNOR GP

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}

Governor Performance Data{1264}
Governor Performance Data{1264}

Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}

Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}

Service Letter-NACD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly

Specifications

Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Specification
3114, 3116 and 3126 MUI Engine Governors

Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Service Letter-China

Service Letter-Asia

Systems Operation

Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors

Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors

Information Release Memo

PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS

Service Letter-APD

Testing and Adjusting

Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors

Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors

Governor - Adjust
3114, 3116, and 3126 Engines

Disassembly and Assembly

Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Service Magazine

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21

Engine Rack Control Assemblies Improved {1257}
1990/07/02

New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02

Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22

Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13

Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21

New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06

Mechanical Unit Injector Identification Code{1290}
1995/12/18

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01

New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01

Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01

New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08

Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08

Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01

Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog 910E :

4P-5503 GOVERNOR GP-UNIT INJECTOR

4P-5731 GOVERNOR GP-UNIT INJECTOR

7W-4812 FASTENER GP-GOVERNOR

9S-1932 COVER GP-FUEL TANK CAP

4P-5527 GOVERNOR GP-UNIT INJECTOR

3W-8020 LINES GP-FUEL

131-4852 GOVERNOR GP-UNIT INJECTOR

7E-8794 DRIVE GP-GOV & TRANSFER PUMP

7W-8434 LINES GP-GOVERNOR OIL

7E-9429 CONTROL GP-GOVERNOR

7W-8600 CONTROL GP-FUEL INJECTION

4P-5748 KIT-GOVERNOR

7E-3423 PUMP GP-FUEL INJECTION

Truck sale:

CAT 910E

BLOUNT PARTS & EQUIPMENT

Call

1992 CAT 910E

MHJ Heavy Equipment Trading Co.

Call

CAT 910E

Marks Heavy Equipments
JOHANNESBURG, GAUTENG, South Africa

CAT 910E

Quarrick Equipment & Auctions
Pennsylvania