HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC GP
KICKOUT & POSITIONER GP
CYLINDER GP
HYDRAULIC SYSTEM
CYLINDER GP
#SEBP21790270
6E-6398: CYLINDER GP-LIFT
6E-6398 CYLINDER GP-LIFT
S/N 1KF820-99999
89MM (4 IN) BORE X 734MM (29 IN) STROKE
PART OF 8Y-7635 HYDRAULIC AR
S/N 1KF820-99999
89MM (4 IN) BORE X 734MM (29 IN) STROKE
PART OF 8Y-7635 HYDRAULIC AR
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-6397 | [1] | CYLINDER AS | |
| 1A. | 3K-6575 | [1] | BUSHING | |
| 2. | 173-9683 M | [1] | BOLT (M30X3.5X90-MM) | |
| 3. | 9X-8399 | [1] | WASHER (33X56X6-MM THK) | |
| 4. | 4T-8054 J | [1] | SEAL AS | |
| 5. | 7J-9885 J | [1] | RING-WEAR | |
| 6. | 9T-8043 | [1] | PISTON | |
| 7. | 8T-4958 J | [1] | RING-WEAR | |
| 8. | 167-2200 J | [1] | SEAL AS | |
| 9. | 167-2307 J | [1] | SEAL-U-CUP | |
| 10. | 231-3538 J | [1] | SEAL-WIPER | |
| 11. | 9T-5297 | [1] | ROD AS | |
| 12. | 6E-4975 | [1] | HEAD AS | |
| 231-3538 J | [1] | SEAL-WIPER | ||
| 13. | 4J-9224 J | [1] | RING-BACKUP | |
| 14. | 175-7898 J | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 235-0355 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES RINGS & SEALS) | ||||
| (FOR USE WITH REHS1392) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP21790271
6E-6273: CYLINDER GP-TILT
6E-6273 CYLINDER GP-TILT
S/N 1KF820-99999
76MM (3 IN) BORE X 785MM (31 IN) STROKE
PART OF 8Y-7635 HYDRAULIC AR
S/N 1KF820-99999
76MM (3 IN) BORE X 785MM (31 IN) STROKE
PART OF 8Y-7635 HYDRAULIC AR
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-6274 | [1] | CYLINDER AS | |
| 1A. | 6S-3465 | [1] | BUSHING | |
| 7J-9288 | [1] | BOSS | ||
| 7K-9201 | [21] | SEAL-LIP TYPE | ||
| 2. | 173-9779 M | [1] | BOLT (M24X3X80-MM) | |
| 3. | 6J-5733 | [1] | RING-WEAR | |
| 4. | 4T-6907 | [1] | RING-WEAR | |
| 5. | 167-2190 | [1] | SEAL AS-BUFFER | |
| 6. | 439-4526 | [1] | SEAL-U-CUP | |
| 7. | 308-1880 | [1] | SEAL-WIPER | |
| 8. | 6E-6278 | [1] | ROD AS | |
| 9. | 175-7896 | [1] | SEAL-O-RING | |
| 10. | 6J-5731 | [1] | RING-BACKUP | |
| 11. | 184-9843 | [1] | HEAD | |
| 12. | 9T-4211 | [1] | PISTON | |
| 13. | 9X-7337 | [1] | SEAL AS | |
| 14. | 6V-8237 | [1] | WASHER (26X44X4-MM THK) | |
| M | METRIC PART | |||
#SEBP21790272
8Y-7635: HYDRAULIC AR
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5G-7819 Y | [1] | CYLINDER & MTG GP-COUPLER | ||
| 6E-6398 Y | [2] | CYLINDER GP-LIFT | ||
| 6E-6273 Y | [2] | CYLINDER GP-TILT | ||
| 8Y-7640 Y | [1] | LINES GP-COUPLER | ||
| 8Y-7641 Y | [1] | LINES GP-FRONT | ||
| 8Y-7642 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 8Y-7530 Y | [1] | LINES GP-PUMP | ||
| 8Y-7643 Y | [1] | LINES GP-TILT CYLINDER | ||
| 8Y-7532 Y | [1] | PUMP GP-GEAR | ||
| 8Y-7773 Y | [1] | TANK GP-HYDRAULIC | ||
| 8Y-7644 Y | [1] | VALVE GP-CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21790273
8Y-8583: HYDRAULIC AR
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
#SEBP21790274
8Y-8586: HYDRAULIC AR
For full view, you need register
#SEBP21790275
8Y-8577: HYDRAULIC AR-CHECK VALVE
8Y-8577 HYDRAULIC AR-CHECK VALVE
S/N 1KF820-99999
THREE VALVE
AN ATTACHMENT
S/N 1KF820-99999
THREE VALVE
AN ATTACHMENT
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| [1] | LINES GP | |||
| 101-7434 | [1] | VALVE GP | ||
| [1] | PLATE AS | |||
#SEBP21790276
8Y-8579: HYDRAULIC AR-CHECK VALVE
For full view, you need register
#SEBP21790277
8Y-7636: KICKOUT & POSITIONER GP
8Y-7636 KICKOUT & POSITIONER GP
S/N 1KF820-99999
PART OF 8Y-7634 CHASSIS AR
Type 1
S/N 1KF820-99999
PART OF 8Y-7634 CHASSIS AR
Type 1
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5G-7820 | [1] | MAGNET AS | |
| 2. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 3. | 5G-7823 | [1] | PLATE AS | |
| 4. | 5G-7822 | [7] | PLATE | |
| 5. | 7X-0818 M | [2] | BOLT (M8X1.25X45-MM) | |
| 6. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 9. | 8R-1486 | [1] | MAGNET AS | |
| 10. | 3E-7843 Y | [2] | CONTROL GP-POSITION | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8R-5704 | [1] | BRACKET | |
| 13. | 8R-5705 | [1] | CLAMP | |
| 14. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 15. | 8R-7192 | [1] | COVER AS | |
| 16. | 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | |
| 17. | 5G-3857 | [1] | PLATE | |
| 18. | 8R-8816 | [1] | TUBE AS | |
| 19. | 8T-6912 M | [4] | BOLT (M8X1.25X50-MM) | |
| 20. | 8R-1496 | [4] | SPACER (10X20X29-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21790278
8Y-7636: KICKOUT & POSITIONER GP
8Y-7636 KICKOUT & POSITIONER GP
S/N 1KF820-99999
PART OF 8Y-7634 CHASSIS AR
Type 2
S/N 1KF820-99999
PART OF 8Y-7634 CHASSIS AR
Type 2
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5G-7820 | [1] | MAGNET AS | |
| 2. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 3. | 5G-7823 | [1] | PLATE AS | |
| 4. | 5G-7822 | [7] | PLATE | |
| 5. | 7X-0818 M | [2] | BOLT (M8X1.25X45-MM) | |
| 6. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 9. | 8R-1486 | [1] | MAGNET AS | |
| 10. | 116-2025 CY | [1] | CONTROL GP-POSITION | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8R-5704 | [1] | BRACKET | |
| 13. | 8R-5705 | [1] | CLAMP | |
| 14. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 15. | 8R-7192 | [1] | COVER AS | |
| 16. | 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | |
| 17. | 5G-3857 | [1] | PLATE | |
| 18. | 8R-8816 | [1] | TUBE AS | |
| 19. | 8T-6912 M | [4] | BOLT (M8X1.25X50-MM) | |
| 20. | 8R-1496 | [4] | SPACER (10X20X29-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21790279
8Y-7640: LINES GP-COUPLER
For full view, you need register
Parts for your IT12B INTEGRATED TOOLCARRIER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8724 | [2] | ELBOW | |
| 2. | 3J-1907 | [4] | SEAL-O-RING | |
| 3. | 6V-8397 | [6] | SEAL-O-RING | |
| 4. | 6W-8448 | [1] | BLOCK | |
| 5. | 6E-1521 Y | [1] | VALVE GP-MANUAL | |
| 6. | 8R-6714 | [1] | TUBE AS | |
| 7. | 6V-9168 | [2] | NUT (11/16-16-THD) | |
| 8. | 6V-8980 | [2] | ELBOW | |
| 9. | 6V-8934 | [2] | ADAPTER | |
| 10. | 4J-5477 | [4] | SEAL-O-RING | |
| 11. | 6V-8641 | [2] | CONNECTOR | |
| 12. | 5G-8368 I | [2] | HOSE AS | |
| 13. | 6W-2890 | [2] | CAP AS-DUST | |
| 14. | 8Y-8378 I | [2] | HOSE AS | |
| 15. | 8R-6715 | [1] | TUBE AS | |
| 16. | 6W-2888 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
| 6V-0408 | [2] | SEAL-BONDED | ||
| 17. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 6V-8713 | [2] | CONNECTOR | |
| 7J-9108 | [2] | SEAL-O-RING | ||
| 19. | 3D-2824 | [4] | SEAL-O-RING | |
| 20. | 8T-5005 M | [4] | BOLT (M10X1.5X70-MM) | |
| 21. | 8T-8897 | [2] | ADAPTER | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Makeup and Relief Valves for Head and Rod Ends of Tilt Cylinders
IT12B INTEGRATED TOOLCARRIER HYDRAULIC SYSTEM
IT12B INTEGRATED TOOLCARRIER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
