AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9U-4828 WIRING GP-ENGINE S/N 5SK1-742 PART OF 4E-8467 CHASSIS AR 950F II WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

WHEEL LOADER 950F II WHEEL LOADER 5SK
 950F Series II Wheel Loader 5SK00001-00742 (MACHINE) SEBP2180 950F II 5SK   (1992)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
9U-2305 WIRING GP-CAB
WIRING GP-CAB
9U-2305 WIRING GP-CAB
WIRING GP-ENGINE
9U-4828 WIRING GP-ENGINE
WIRING GP-FRONT
9U-4558 WIRING GP-FRONT
WIRING GP-PAYLOAD SENSOR
102-8738 WIRING GP-PAYLOAD SENSOR
WIRING GP-REAR
9U-1823 WIRING GP-REAR
 

#SEBP21800220
 

9U-4828: WIRING GP-ENGINE

9U-4828 WIRING GP-ENGINE
S/N 5SK1-742
PART OF 4E-8467 CHASSIS AR
i00168054 SEBP2180
9U4828 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 4D-7794 [2] CLIP  
3. 9G-9150 [3] CLIP  
4. 9U-2763 [1] HARNESS AS-ENGINE  
5. 6V-9601 [1] ADAPTER  
6. 3S-2093 [8] STRAP-CABLE  
7. 9X-4276 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
8. 3J-1907 [3] SEAL-O-RING  
9. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
10. 8R-9137 [2] ANGLE  
11. 9G-9152 [2] CLIP  
12. 8T-4133 M [2] NUT (M10X1.5-THD)  
13. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
14. 5P-9297 [1] CLIP (LOOP)  
15. 3E-7886 [1] SENSOR GP-SPEED (ENGINE)  
16. 3E-5370 [2] SENSOR GP-TEMPERATURE (TRANSMISSION OIL)  
17. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
19. 9X-3495 [3] CLIP AS  
20. 8T-4224 [11] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
22. 9M-8406 [6] CLIP (LOOP)  
23. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
24. 6W-8946 [2] STRIP AS  
25. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
26. 8T-4190 M [2] BOLT (M16X2X25-MM)  
27. 8M-2770 [3] CLIP (LOOP)  
28. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
29. 8M-2773 [2] CLIP (LOOP)  
30. 5C-7261 M [3] NUT (M8X1.25-THD)  
31. 3V-0778 [1] BRACKET  
32. 4D-9517 [1] CLIP  
33. 6T-2217 [1] RESISTOR AS (STARTING SYSTEM DIAGNOSTIC)  
34. 9U-2764 [1] HARNESS AS-ENGINE  
35. 3K-0360 [1] SEAL-O-RING  
36. 8C-3569 [1] SWITCH AS-TEMPERATURE (ETHER AID COOLANT)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  3K-0360 [1] SEAL-O-RING  
37. 4E-2843 [1] PLATE AS  
38. 3E-5370 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
  M   METRIC PART
 

#SEBP21800221
 

9U-4558: WIRING GP-FRONT

9U-4558 WIRING GP-FRONT
S/N 5SK1-742
PART OF 4E-8467 CHASSIS AR
i00168051 SEBP2180
9U4558 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8801 [14] NUT (3/8-16-THD)  
2. 8T-4896 [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 6D-4246 [1] CLIP (LOOP)  
4. 8M-2770 [7] CLIP (LOOP)  
5. 9D-3769 [3] GROMMET  
6. 9G-9152 [1] CLIP  
7. 5P-7648 [2] GROMMET  
8. 6T-6962 [2] WIRE AS  
  3S-2093 [2] STRAP-CABLE  
  3T-3048 [2] CLIP AS  
9. 7T-0969 [1] HORN AS (24-VOLT, LOW TONE)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
10. 4M-6425 [1] BOLT (5/16-18X1-IN)  
  8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  6V-8189 [1] NUT (5/16-18-THD)  
11. 9X-3495 [1] CLIP AS  
  8C-3334 [2] RIVET-TUBULAR  
12. 9U-4559 [1] HARNESS AS-FRONT  
13. 9M-8406 [3] CLIP (LOOP)  
14. 4K-8864 [2] CLIP (LOOP)  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
  5K-0806 [1] CLAMP  
16. 4L-6454 [1] BOLT (3/8-16X1-IN)  
17. 8R-8139 [1] HARNESS AS  
18. 3T-3045 [1] CLIP AS  
19. 3T-0050 [2] CLIP  
20. 9V-9311 [1] BRACKET  
21. 7X-3178 [2] BOLT (1/4-20X1.625-IN)  
  5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
22. 7V-5628 [1] PLATE (TOP)  
23. 7V-6089 [2] CLAMP  
24. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
25. 5V-6439 [2] PLATE  
26. 4V-1939 [4] CLAMP  
  M   METRIC PART
 

#SEBP21800222
 

102-8738: WIRING GP-PAYLOAD SENSOR

102-8738 WIRING GP-PAYLOAD SENSOR
S/N 5SK1-742
PART OF 102-8737 MONITOR AR-PAYLOAD
i00168117 SEBP2180
1028738 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-2040 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER HEAD END OIL)  
2. 8X-5562 I [1] HOSE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
3. 6V-8397 [2] SEAL-O-RING  
4. 4E-2448 [1] BRACKET  
5. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 101-3677 [1] ADAPTER  
8. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
9. 6K-0806 [8] STRAP-CABLE  
10. 6V-8801 [5] NUT (3/8-16-THD)  
  5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 7I-3235 [1] GUARD  
12. 4E-2452 [1] ARM-BAIL  
13. 8K-1253 [2] ROD END  
14. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
15. 2M-2292 [1] ROD  
16. 7I-3236 [1] SUPPORT AS  
17. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  9X-6165 [6] WASHER (6.5X22X2.5-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
  8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
  5C-2890 M [3] NUT (M6X1-THD)  
18. 4E-2250 [1] HOUSING  
19. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
20. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
21. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
22. 6S-4868 [1] LEVER  
23. 4E-2453 [1] SHAFT  
24. 6D-3025 [2] BALL BEARING  
25. 2L-6726 [2] RING-RETAINING  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
28. 3E-5400 Y [1] SENSOR GP-POSITION (LIFT)  
29. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
30. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 8T-5005 BM [8] BOLT (M10X1.5X70-MM)  
32. 8T-4121 B [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
34. 4J-0520 [2] SEAL-O-RING  
35. 7T-8593 [1] BLOCK  
36. 103-4772 [1] HARNESS AS  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21800223
 

9U-1823: WIRING GP-REAR

9U-1823 WIRING GP-REAR
S/N 5SK1-742
PART OF 4E-8467 CHASSIS AR
i00168012 SEBP2180
9U1823 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-8406 [8] CLIP (LOOP)  
2. 7M-3361 [2] GROMMET  
3. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 [1] NUT (3/8-16-THD)  
5. 9U-4371 [1] HARNESS AS  
6. 5P-7648 [2] GROMMET  
7. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP21800224
 

7I-3696: WIRING GP-RELAY PANEL

7I-3696 WIRING GP-RELAY PANEL
S/N 5SK1-190
PART OF 4E-8473 BATTERY & WIRING GP
i00167725 SEBP2180
7I3696 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)  
    (MAIN)
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
2. 7V-9275 [1] STRAP  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
  4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
5. 3S-2093 [1] STRAP-CABLE  
6. 5M-6668 [2] SCREW-MACHINE (8-32X0.75-IN)  
  4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
7. 9G-9150 [1] CLIP  
8. 9G-4360 [1] CAP-CONNECTOR  
9. 4K-5122 [4] HOLDER AS-FUSE  
    (EACH INCLUDES)
  7N-2867 [1] CAP-FUSE HOLDER  
10. 3K-8782 [4] FUSE (10-AMPERE)  
11. 4E-2355 [1] INLAY  
12. 8R-7931 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
13. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
  8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
14. 6T-2217 [1] RESISTOR AS (STARTING SYSTEM DIAGNOSTIC)  
  5P-5677 BD WIRE (18-GA, BLACK)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
15. 8R-7933 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
16. 5C-9553 M [4] BOLT (M6X1X16-MM)  
  8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  4S-1962 [2] CLIP (LOOP)  
18. 3T-0376 [1] SWITCH AS-MAGNETIC (MAIN RELAY)  
  4F-2294 [2] NUT-JAM (5/16-24-THD)  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  6V-8378 [2] NUT (10-32-THD)  
19. 3E-0075 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  5C-2890 M [2] NUT (M6X1-THD)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE (16 CM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
  5C-2890 M [2] NUT (M6X1-THD)  
21. 9U-2762 [1] HARNESS AS  
22. 9S-4693 CIRCUIT BREAKER AS (80-AMPERE)  
    (ALTERNATOR)
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21800225
 

7I-3696: WIRING GP-RELAY PANEL

7I-3696 WIRING GP-RELAY PANEL
S/N 5SK191-742
PART OF 4E-8473 BATTERY & WIRING GP
i00167726 SEBP2180
7I3696 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
2. 7V-9275 [1] STRAP  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
  4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
5. 3S-2093 [1] STRAP-CABLE  
6. 5M-6668 [2] SCREW-MACHINE (8-32X0.75-IN)  
  4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
7. 9G-9150 [1] CLIP  
8. 9G-4360 [1] CAP-CONNECTOR  
9. 4K-5122 [4] HOLDER AS-FUSE  
    (EACH INCLUDES)
  7N-2867 [1] CAP-FUSE HOLDER  
10. 3K-8782 [4] FUSE (10-AMPERE)  
11. 4E-2355 [1] INLAY  
12. 8R-7931 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
13. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
  8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
14. 6T-2217 [1] RESISTOR AS (STARTING SYSTEM DIAGNOSTIC)  
  5P-5677 BD WIRE (18-GA, BLACK)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
15. 8R-7933 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
16. 5C-9553 M [4] BOLT (M6X1X16-MM)  
  8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  4S-1962 [2] CLIP (LOOP)  
18. 3T-0376 [1] SWITCH AS-MAGNETIC (MAIN RELAY)  
  4F-2294 [2] NUT-JAM (5/16-24-THD)  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  6V-8378 [2] NUT (10-32-THD)  
19. 3E-0075 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  5C-2890 M [2] NUT (M6X1-THD)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE (16 CM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
  5C-2890 M [2] NUT (M6X1-THD)  
21. 103-6029 C [1] HARNESS AS-POWER  
22. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21800226
 

9U-1828: WIRING GP-RIDE CONTROL

9U-1828 WIRING GP-RIDE CONTROL
S/N 5SK1-742
PART OF 9U-1827 CONTROL AR-RIDE
i00168016 SEBP2180
9U1828 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-9599 [1] HARNESS AS  
2. 6V-8927 [2] BOLT-SOCKET HEAD (6-32X0.5-IN)  
3. 7T-2081 [1] SWITCH AS-ROCKER (RIDE CONTROL)  
4. 6T-6329 [1] BEZEL  
5. 9U-1063 [1] WIRE AS  
6. 4D-7794 [4] CLIP  
7. 6V-8801 [1] NUT (3/8-16-THD)  
8. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 3S-2093 [1] STRAP-CABLE  
 

#SEBP21800227
 

4E-0947: WIRING GP-SECONDARY STEERING

4E-0947 WIRING GP-SECONDARY STEERING
S/N 5SK1-742
PART OF 8R-7365, 9U-2668 STEERING AR-SECONDARY
i00167468 SEBP2180
4E0947 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-6547 [1] SWITCH AS-FLOW (SECONDARY STEERING)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
2. 3K-0360 [1] SEAL-O-RING  
3. 3S-2093 [2] STRAP-CABLE  
4. 8R-8182 [1] HARNESS AS  
 

#SEBP21800228
 

9C-8179: AXLE AR-FIXED

9C-8179 AXLE AR-FIXED
S/N 5SK1-742
PART OF 9U-1822 POWER TRAIN AR
i00167967 SEBP2180
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9C-8178 Y [2] BRAKE & PLANETARY GP  
  9C-8171 Y [1] DIFFERENTIAL GP  
  9C-8176 Y [1] GEAR GP-BEVEL & PINION  
  9C-8180 Y [1] HOUSING GP-FIXED AXLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21800229
 

8R-1445: AXLE AR-OSCILLATING

8R-1445 AXLE AR-OSCILLATING -REAR
S/N 5SK1-742
PART OF 9U-1822 POWER TRAIN AR
i00167777 SEBP2180
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9C-8178 Y [2] BRAKE & PLANETARY GP  
  9C-8171 Y [1] DIFFERENTIAL GP  
  9C-8176 Y [1] GEAR GP-BEVEL & PINION  
  8R-1446 Y [1] HOUSING GP-OSCILLATING AXLE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950F II :

WIRING GP-CAB
9U-2305 WIRING GP-CAB
WIRING GP-CAB
9U-2305 WIRING GP-CAB
WIRING GP-CAB
9U-0511 WIRING GP-CAB
WIRING GP-CAB
9U-0511 WIRING GP-CAB
WARNING GP-BACKUP
8R-9568 WARNING GP-BACKUP
SWITCH GP-WIPER
3E-0155 SWITCH GP-WIPER
SWITCH GP-START
9G-7641 SWITCH GP-START
3E-0075 SWITCH GP-MAGNETIC
WIRING GP-FRONT
9U-4558 WIRING GP-FRONT
WIRING GP-PAYLOAD SENSOR
102-8738 WIRING GP-PAYLOAD SENSOR
WIRING GP-REAR
9U-1823 WIRING GP-REAR
WIRING GP-RELAY PANEL
7I-3696 WIRING GP-RELAY PANEL
WIRING GP-RELAY PANEL
7I-3696 WIRING GP-RELAY PANEL
WIRING GP-RIDE CONTROL
9U-1828 WIRING GP-RIDE CONTROL
WIRING GP-SECONDARY STEERING
4E-0947 WIRING GP-SECONDARY STEERING
9C-8179 AXLE AR-FIXED

Truck sale:

Caterpillar 950F II
 
Caterpillar 950F II
- Wheel loaders
FINNING CANADA
 
46.000 
Caterpillar 950FII, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
ZIEGLER CAT
 
34,500 
Caterpillar 950FII, Construction
- Wheel Loaders

 
48,000 
Caterpillar 950FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950FII, Construction
31,500 
Caterpillar 950FII, Construction
- Wheel Loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.