OPERATOR STATION
SEAT GPCAB GP
CANOPY GP
AIR CONDITIONER GP
CONTROL GP-PILOT OPERATED HYD
OPERATOR STATION
SEAT GP
#SEBP21800450
8Y-6000: ARMREST GP
8Y-6000 ARMREST GP
S/N 5SK1-742
PART OF 8Y-6918 SEAT GP, 8Y-6301, 8Y-6302 SEAT GP-SUSPENSION
S/N 5SK1-742
PART OF 8Y-6918 SEAT GP, 8Y-6301, 8Y-6302 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-5904 Y | [1] | ARMREST GP (LH) | |
| 2. | 8Y-5898 | [1] | BRACKET AS | |
| 3. | 7X-0456 | [1] | BOLT (7/16-14X4.5-IN) | |
| 4. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 5. | 5V-1498 | [1] | LOCKNUT (3/8-16-THD) | |
| 6. | 9X-8873 | [1] | BOLT (1/2-13X2.25-IN) | |
| 7. | 2M-0849 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 8. | 1K-6872 | [1] | LOCKNUT (1/2-13-THD) | |
| 8Y-6051 F | [1] | SPACER (11.19X14.21X14.24-MM THK) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21800451
4E-8461: CAB AR
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9U-1432 Y | [1] | ROPS GP-ENCLOSED | ||
| S/N 5SK1-190 | ||||
| 102-9229 Y | [1] | ROPS GP-ENCLOSED | ||
| S/N 5SK191-742 | ||||
| 4E-3102 Y | [1] | SEAT GP-SUSPENSION | ||
| 4E-8462 Y | [1] | PANEL GP-INSTRUMENT | ||
| 4E-8463 Y | [1] | WIPER GP-WINDOW | ||
| 4E-8466 Y | [1] | CONTROL GP-PARKING BRAKE | ||
| 9C-8239 Y | [1] | HEATER GP-CAB | ||
| 9C-8240 Y | [1] | DUCT & CONTROL GP | ||
| 9C-8243 Y | [1] | MIRROR GP-REAR VIEW (INSIDE) | ||
| 9U-0511 Y | [1] | WIRING GP-CAB | ||
| 9U-1745 Y | [1] | PANEL GP-INSTRUMENT | ||
| 9U-2281 Y | [1] | LINER GP-CAB | ||
| 9U-2282 Y | [1] | SUPPRESSION GP-CAB SOUND | ||
| 101-2497 Y | [1] | INSTALLATION GP-RADIO | ||
| 3V-7476 | [1] | KEY-HANDLE | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21800452
9U-4176: CAB AR
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS#SEBP21800453
9U-2153: CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4E-8466 Y | [1] | CONTROL GP-PARKING BRAKE | ||
| 8R-2883 Y | [1] | DASH GP | ||
| S/N 5SK1-190 | ||||
| 106-0621 Y | [1] | DASH GP | ||
| S/N 5SK191-742 | ||||
| 104-7174 Y | [1] | GUARD GP-VANDALISM | ||
| S/N 5SK191-742 | ||||
| 9U-4400 Y | [1] | LINER GP-CAB | ||
| 9C-8243 Y | [1] | MIRROR GP-REAR VIEW (INSIDE) | ||
| 9U-2224 Y | [1] | PANEL GP-INSTRUMENT | ||
| 4E-8462 Y | [1] | PANEL GP-INSTRUMENT | ||
| S/N 5SK1-190 | ||||
| 106-0622 Y | [1] | PANEL GP-INSTRUMENT | ||
| S/N 5SK191-742 | ||||
| 9U-2154 Y | [1] | ROPS GP | ||
| S/N 5SK1-190 | ||||
| 102-9238 Y | [1] | ROPS GP-OPEN | ||
| S/N 5SK191-742 | ||||
| 4E-3101 Y | [1] | SEAT GP-SUSPENSION | ||
| 9U-2305 Y | [1] | WIRING GP-CAB | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21800454
8T-9761: COMPRESSOR GP-REFRIGERANT
8T-9761 COMPRESSOR GP-REFRIGERANT
S/N 5SK1-742
PART OF 9Y-1953 COMPRESSOR GP-REFRIGERANT
S/N 5SK1-742
PART OF 9Y-1953 COMPRESSOR GP-REFRIGERANT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-4158 J | [1] | SEAL-BEARING | |
| 2. | 8T-8814 | [1] | COVER-DUST | |
| 3. | 8C-4160 J | [1] | SEAL-COIL | |
| 4. | 8T-8813 | [1] | COIL AS | |
| 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 5. | 8C-4159 J | [1] | SEAL-PULLEY | |
| 6. | 8T-8817 | [1] | BALL BEARING | |
| 7. | 8C-4405 | [1] | RING-RETAINING | |
| 8. | 1B-8702 | [1] | KEY-WOODRUFF | |
| 9. | 2K-0564 | [1] | LOCKNUT (1/2-20-THD) | |
| 10. | 1H-8171 | [2] | SEAL-O-RING | |
| 11. | 8T-4171 M | [3] | BOLT (M6X1X12-MM) | |
| 1H-3338 | [3] | LOCKWASHER (EXTERNAL TOOTH) | ||
| 12. | 8C-3591 | [1] | DRIVE AS-CLUTCH | |
| 13. | 8T-8816 | [1] | COMPRESSOR AS | |
| 14. | 7T-4532 | [1] | PLUG AS | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8T-8815 | [1] | KIT-REFRIGERANT SEAL | ||
| 8T-8821 J | [1] | KIT-DUST SEAL | ||
| 8T-8819 | [1] | KIT-REPAIR | ||
| (INCL NUT,SNAP RINGS,KEY,SHIMS,COIL LEAD WIRE CLAMP & SCREW) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP21800455
9Y-1953: COMPRESSOR GP-REFRIGERANT
9Y-1953 COMPRESSOR GP-REFRIGERANT
S/N 5SK1-742
PART OF 9U-1829 AIR CONDITIONER AR
S/N 5SK1-742
PART OF 9U-1829 AIR CONDITIONER AR
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-3898 | [1] | V-BELT | |
| 2. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 3. | 9Y-1285 | [1] | STRAP | |
| 4. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 5. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-5436 M | [1] | BOLT (M10X1.5X130-MM) | |
| 7. | 7C-3941 | [1] | PLATE | |
| 8. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 9. | 8T-9761 Y | [1] | COMPRESSOR GP-REFRIGERANT | |
| 10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4222 | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 12. | 7E-7302 | [1] | BRACKET | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21800456
6I-0489: CONDENSER & MTG GP-REFRIGERANT
6I-0489 CONDENSER & MTG GP-REFRIGERANT
S/N 5SK1-742
PART OF 9U-1829 AIR CONDITIONER AR
S/N 5SK1-742
PART OF 9U-1829 AIR CONDITIONER AR
For full view, you need register
#SEBP21800457
163-6090: CONTROL GP-PILOT OPERATED HYD
163-6090 CONTROL GP-PILOT OPERATED HYD -2-FUNCTION
S/N 5SK424-424; 5SK491-491
PART OF 163-6068 CONVERSION GP-PILOT CONTROL
S/N 5SK424-424; 5SK491-491
PART OF 163-6068 CONVERSION GP-PILOT CONTROL
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-8874 | [1] | ADAPTER | ||
| 6V-8636 | [4] | CONNECTOR | ||
| 6V-8724 | [1] | ELBOW | ||
| 6V-9001 | [1] | ELBOW | ||
| 8C-8988 | [1] | ELBOW | ||
| 102-1811 | [1] | GASKET | ||
| 158-8863 | [1] | CONTROL GP-HANDLE (JOYSTICK) | ||
| 1H-4393 | [2] | LOCKWASHER | ||
| 3E-4313 M | [2] | SCREW-BUTTON HEAD (M4X0.7X8-MM) | ||
| [1] | SWITCH AS (TRANSMISSION DOWNSHIFT) | |||
| [1] | HARNESS AS | |||
| 9U-2966 I | [1] | HOSE AS | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 124-4401 | [1] | KNOB | ||
| 133-9200 | [1] | LEVER | ||
| 8T-4133 M | [4] | NUT (M10X1.5-THD) | ||
| 8T-4244 M | [2] | NUT (M12X1.75-THD) | ||
| [1] | ROD | |||
| 3E-4313 M | [4] | SCREW-BUTTON HEAD (M4X0.7X8-MM) | ||
| 104-3601 M | [1] | SCREW-MACHINE (M5X0.8X25-MM) | ||
| 9X-2040 M | [4] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | ||
| 9X-2042 M | [4] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 3J-1907 | [8] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [8] | SEAL-O-RING | ||
| 6V-8398 | [2] | SEAL-O-RING | ||
| 102-1810 | [1] | SHEET | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 9D-3721 | [1] | SWITCH-TOGGLE (SINGLE POLE) | ||
| 6V-8781 | [1] | TEE | ||
| 6V-8782 | [1] | TEE | ||
| 136-9274 | [1] | VALVE GP-MANUAL (IMPLEMENT LOCKOUT) | ||
| Y | [1] | VALVE GP-PILOT (2-FUNCTION) | ||
| 4B-4274 | [1] | WASHER (5.5X13X1.2-MM THK) | ||
| 4B-4863 | [4] | WASHER (4.7X11X1.2-MM THK) | ||
| 5J-0489 | [1] | WASHER (0.5X0.7X0.125-IN THK) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21800458
4Q-4185: CONTROL GP-PILOT OPERATED HYD
4Q-4185 CONTROL GP-PILOT OPERATED HYD -JOYSTICK, 2-FUNCTION
S/N 5SK1-742
S/N 5SK1-742
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4L-6454 | [2] | BOLT (3/8-16X1-IN) | ||
| 4K-8302 | [1] | CLIP (LOOP) | ||
| 8T-0075 | [2] | CONNECTOR | ||
| 6V-8636 | [4] | CONNECTOR | ||
| 6V-8724 | [1] | ELBOW | ||
| 6V-9876 | [1] | ELBOW | ||
| 6V-9850 | [2] | ELBOW | ||
| 114-6479 | [1] | FILM-INSTRUCTION | ||
| 2Q-1123 I | [1] | HOSE AS | ||
| 2Q-0950 I | [1] | HOSE AS | ||
| 2Q-0949 I | [1] | HOSE AS | ||
| 2Q-0952 I | [1] | HOSE AS | ||
| 4I-0818 I | [1] | HOSE AS | ||
| 4E-7822 | [1] | CONTROL GP-HANDLE | ||
| 138-8140 | [1] | SWITCH AS-PUSH BUTTON (CAP)(TRANSMISSION DOWNSHIFT) | ||
| 8R-7729 | [1] | HANDLE | ||
| 4E-7462 | [1] | HARNESS AS (DOWNSHIFT) | ||
| 8T-4244 M | [1] | NUT (M12X1.75-THD) | ||
| 106-4540 | [1] | ROD | ||
| 6V-9505 M | [2] | SCREW-MACHINE (M3X0.5X25-MM) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 8T-6885 BE | TUBE-HEAT SHRINK (19.05-MM DIA) | |||
| 2Q-0958 | [1] | PLATE | ||
| 6V-8936 | [1] | REDUCER | ||
| 3J-1907 | [8] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [16] | SEAL-O-RING | ||
| 6V-8398 | [2] | SEAL-O-RING | ||
| 7K-1181 | [3] | STRAP-CABLE | ||
| 6V-8774 | [1] | TEE | ||
| 6V-9836 | [1] | TEE-SWIVEL | ||
| 4Z-5943 Y | [1] | VALVE GP-PILOT (JOYSTICK, LIFT, TILT)(LIFT AND TILT) | ||
| 4Z-5829 Y | [1] | VALVE GP-SEQUENCE | ||
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21800459
9U-0510: CONTROL GP-PILOT OPERATED HYD
9U-0510 CONTROL GP-PILOT OPERATED HYD -2-FUNCTION
S/N 5SK1-190
PART OF 4E-8460, 9U-2188 OPERATOR AR
S/N 5SK1-190
PART OF 4E-8460, 9U-2188 OPERATOR AR
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-4871 | [1] | COVER | |
| 2. | 9M-8406 | [2] | CLIP (LOOP) | |
| 3. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 5. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 6. | 4E-7801 | [2] | GUSSET | |
| 7. | 9C-1250 I | [1] | HOSE AS | |
| 8. | 9U-4872 | [1] | SEAL | |
| 9. | 8P-6363 | [1] | PLUG | |
| 10. | 6V-8625 | [1] | ELBOW | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 11. | 8C-0564 | [2] | CONNECTOR | |
| 12. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 13. | 9X-2040 M | [4] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 14. | 4E-1062 | [1] | CUSHION AS-ARMREST | |
| 15. | 4E-7823 | [1] | ANGLE | |
| 16. | 9X-2042 M | [4] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 17. | 4E-7797 | [1] | GASKET | |
| 18. | 9U-4875 | [1] | HOUSING | |
| 19. | 6V-9492 M | [1] | SCREW-MACHINE (M4X0.7X25-MM) | |
| 7Y-3282 | [1] | WASHER (1.6-MM THK) | ||
| 20. | 7Y-3173 M | [4] | SCREW-BUTTON HEAD (M4X0.7X12-MM) | |
| 21. | 4E-7363 | [1] | LEVER | |
| 22. | 3E-2966 | [1] | PLATE-INSTRUCTION | |
| 23. | 4B-4158 | [5] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 24. | 8R-9202 | [2] | KNOB | |
| 25. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 26. | 4E-7819 | [1] | ROD | |
| 27. | 6E-5019 Y | [1] | VALVE GP-PILOT (2-FUNCTION) | |
| 28. | 6V-8724 | [2] | ELBOW | |
| 29. | 6V-8397 | [3] | SEAL-O-RING | |
| 30. | 3J-1907 | [8] | SEAL-O-RING | |
| 31. | 6E-3079 | [1] | VALVE-BALL (IMPLEMENT LOCKOUT) | |
| 6E-4546 | [1] | KIT-SEAL | ||
| 32. | 6V-8636 | [4] | CONNECTOR | |
| 33. | 4E-7817 | [1] | ROD | |
| 34. | 6V-9850 | [1] | ELBOW | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
