AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3516 Engine Electronic Ignition System 4EK00001-UP FUEL SYSTEM Caterpillar SIS



GAS ENGINE G3516 GAS ENGINE 4EK
 G3516 Engine Electronic Ignition System 4EK00001-UP SEBP2185 G3516 4EK   (1992)

Parts group G3516:

  For full view, you need register
FUEL SYSTEM
CARBURETOR GP
CARBURETOR AS
100-7478 CARBURETOR AS
100-7478 CARBURETOR AS
S/N 4EK737-UP
PART OF 4P-9091 CARBURETOR GP
ALSO AN ATTACHMENT
CARBURETOR AS
334-2678 CARBURETOR AS
334-2678 CARBURETOR AS
PART OF 9Y-3190 CARBURETOR GP
ALSO AN ATTACHMENT
CARBURETOR GP
105-2258 CARBURETOR GP
105-2258 CARBURETOR GP
S/N 4EK307-UP
CARBURETOR GP
106-6498 CARBURETOR GP
106-6498 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
106-6498 CARBURETOR GP
106-6498 CARBURETOR GP
PART OF 106-7946, 121-7725, 136-7411, 7E-8281 CARBURETOR GP
ALSO AN ATTACHMENT
CARBURETOR GP
106-7946 CARBURETOR GP
106-7946 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
121-7725 CARBURETOR GP
121-7725 CARBURETOR GP
S/N 4EK457-UP
CARBURETOR GP
136-7411 CARBURETOR GP
136-7411 CARBURETOR GP
HIGH BTU
FOR USE WITH DRY MANIFOLD
AN ATTACHMENT
CARBURETOR GP
160-7741 CARBURETOR GP
160-7741 CARBURETOR GP
S/N 4EK2540-UP
CARBURETOR GP
170-0984 CARBURETOR GP
170-0984 CARBURETOR GP
PART OF 170-0985 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
170-0985 CARBURETOR GP
170-0985 CARBURETOR GP
Type 1
FOR USE WITH SINGLE REAR MOUNT AIR CLEANER
AN ATTACHMENT
CARBURETOR GP
170-0985 CARBURETOR GP
170-0985 CARBURETOR GP
Type 2
FOR USE WITH SINGLE REAR MOUNT AIR CLEANER
AN ATTACHMENT
CARBURETOR GP
215-2784 CARBURETOR GP
215-2784 CARBURETOR GP
FOR USE WITH LANDFILL UPRATE ENGINE
AN ATTACHMENT
CARBURETOR GP
4P-0664 CARBURETOR GP
4P-0664 CARBURETOR GP
PART OF 7E-8725 CONVERSION AR
AN ATTACHMENT
CARBURETOR GP
4P-9091 CARBURETOR GP
4P-9091 CARBURETOR GP
S/N 4EK500-UP
REQUIRES 4P-9088 AIR CLEANER, 4P-9090 REGULATOR AND 7E-9202 THROTTLE
ALSO AN ATTACHMENT
CARBURETOR GP
7E-8281 CARBURETOR GP
7E-8281 CARBURETOR GP
S/N 4EK1-123
CARBURETOR GP
7E-8281 CARBURETOR GP
7E-8281 CARBURETOR GP
S/N 4EK169-UP
CARBURETOR GP
9Y-3190 CARBURETOR GP
9Y-3190 CARBURETOR GP
Type 1
ALSO AN ATTACHMENT
CARBURETOR GP
9Y-3190 CARBURETOR GP
9Y-3190 CARBURETOR GP
Type 2
ALSO AN ATTACHMENT
CARBURETOR GP
9Y-3834 CARBURETOR GP
9Y-3834 CARBURETOR GP
PART OF 9Y-3190 CARBURETOR GP
ALSO AN ATTACHMENT
CONTROL GP-CARBURETOR
121-7548 CONTROL GP-CARBURETOR
121-7548 CONTROL GP-CARBURETOR
S/N 4EK457-UP
CONTROL GP-CARBURETOR
146-9979 CONTROL GP-CARBURETOR
146-9979 CONTROL GP-CARBURETOR
G3512 DRY MANIFOLD
AN ATTACHMENT
CONTROL GP-CARBURETOR
4P-5251 CONTROL GP-CARBURETOR
4P-5251 CONTROL GP-CARBURETOR
PART OF 116-3736, 174-3082, 178-4530 ACTUATOR GP-GOVERNOR, 107-4471 GOVERNOR GP-ELECTRIC, 9Y-6736 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
S/N 4EK1-357
CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
4P-6942 CONTROL GP-CARBURETOR
S/N 4EK358-UP
CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
S/N 4EK1-357
CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
S/N 4EK358-387
CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
4P-7316 CONTROL GP-CARBURETOR
S/N 4EK388-UP
124-6325 KIT-CARBURETOR BEARING
124-6325 KIT-CARBURETOR BEARING
FOR USE WITH ALL ENGINE ARRANGEMENTS
AN ATTACHMENT
CONTROL GP-FUEL
ACTUATOR GP-ELECTRONIC
102-8377 ACTUATOR GP-ELECTRONIC
102-8377 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
PART OF 107-3576 ACTUATOR GP-ELECTRONIC
AN ATTACHMENT
ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
Type 1
FIELD REPLACEMENT ORDER @@@@@196-9529@@@@@
AN ATTACHMENT
ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
Type 2
FIELD REPLACEMENT ORDER @@@@@196-9529@@@@@
AN ATTACHMENT
133-5095 ACTUATOR GP-ELECTRONIC
133-5095 ACTUATOR GP-ELECTRONIC
S/N 4EK949-2499
ACTUATOR GP-ELECTRONIC
180-2957 ACTUATOR GP-ELECTRONIC
180-2957 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
PART OF 107-3576 ACTUATOR GP-ELECTRONIC
AN ATTACHMENT
ACTUATOR GP-ELECTRONIC
196-9528 ACTUATOR GP-ELECTRONIC
196-9528 ACTUATOR GP-ELECTRONIC
PART OF 196-9529 ACTUATOR GP-ELECTRONIC
ACTUATOR GP-ELECTRONIC
196-9529 ACTUATOR GP-ELECTRONIC
196-9529 ACTUATOR GP-ELECTRONIC
FIELD REPLACEMENT FOR @@@@@107-3576@@@@@
ACTUATOR GP-ELECTRONIC
7E-3335 ACTUATOR GP-ELECTRONIC
7E-3335 ACTUATOR GP-ELECTRONIC
AN ATTACHMENT
CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
PART OF 102-0000 CONVERSION AR, 6I-4412 CONVERSION AR-ENGINE
FOR USE WITH CONVERSION FROM NATURAL GAS TO PROPANE
AN ATTACHMENT
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
PART OF 7E-3223 VALVE GP-SOLENOID
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
S/N 4EK737-UP
PART OF 100-7478 CARBURETOR AS
ALSO AN ATTACHMENT
VALVE GP-GAS CONTROL
418-7744 VALVE GP-GAS CONTROL
418-7744 VALVE GP-GAS CONTROL
PART OF 381-0874 CONVERSION AR-ENGINE
VALVE GP-GAS CONTROL
453-6077 VALVE GP-GAS CONTROL
453-6077 VALVE GP-GAS CONTROL
PART OF 381-0874, 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
PART OF 100-7478, 334-2678 CARBURETOR AS, 9Y-3834 CARBURETOR GP
ALSO AN ATTACHMENT
CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
150-1233 CONTROL GP-FUEL RATIO
150-1233 CONTROL GP-FUEL RATIO
S/N 4EK2540-UP
REGULATOR AS-GAS PRESSURE
335-5764 REGULATOR AS-GAS PRESSURE
335-5764 REGULATOR AS-GAS PRESSURE
PART OF 155-1724, 251-9480, 7E-3404 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
PART OF 106-2447, 155-1724, 251-9480, 7E-3404 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
VALVE GP-FUEL RATIO
6I-0236 VALVE GP-FUEL RATIO
6I-0236 VALVE GP-FUEL RATIO
PART OF 106-2447, 155-1724, 251-9480 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
CONTROL GP-GOVERNOR
ACTUATOR AS
118-7590 ACTUATOR AS
118-7590 ACTUATOR AS
S/N 4EK737-948
PART OF 108-4886 ACTUATOR GP-GOVERNOR, 107-4471 GOVERNOR GP-ELECTRIC
ALSO AN ATTACHMENT
ACTUATOR AS
118-7590 ACTUATOR AS
118-7590 ACTUATOR AS
S/N 4EK411-UP
PART OF 108-4886 ACTUATOR GP-GOVERNOR, 118-7591 GOVERNOR GP-ELECTRONIC
ALSO AN ATTACHMENT
166-4454 ACTUATOR AS-GOVERNOR
166-4454 ACTUATOR AS-GOVERNOR
PART OF 174-3083 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
244-5520 ACTUATOR AS-GOVERNOR
244-5520 ACTUATOR AS-GOVERNOR
AIR, FUEL RATIO
AN ATTACHMENT
326-2803 ACTUATOR AS-GOVERNOR
326-2803 ACTUATOR AS-GOVERNOR
FIELD INSTALLATION
ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
S/N 4EK4102-UP
PART OF 9Y-7584 GOVERNOR GP-ELECTRONIC
ACTUATOR GP-ELECTRONIC
102-8377 ACTUATOR GP-ELECTRONIC
102-8377 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
PART OF 107-3576 ACTUATOR GP-ELECTRONIC
AN ATTACHMENT
ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
Type 1
FIELD REPLACEMENT ORDER @@@@@196-9529@@@@@
AN ATTACHMENT
ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
107-3576 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
Type 2
FIELD REPLACEMENT ORDER @@@@@196-9529@@@@@
AN ATTACHMENT
133-5095 ACTUATOR GP-ELECTRONIC
133-5095 ACTUATOR GP-ELECTRONIC
S/N 4EK949-2499
ACTUATOR GP-ELECTRONIC
180-2957 ACTUATOR GP-ELECTRONIC
180-2957 ACTUATOR GP-ELECTRONIC
ELECTROHYDRAULIC
PART OF 107-3576 ACTUATOR GP-ELECTRONIC
AN ATTACHMENT
ACTUATOR GP-ELECTRONIC
196-9528 ACTUATOR GP-ELECTRONIC
196-9528 ACTUATOR GP-ELECTRONIC
PART OF 196-9529 ACTUATOR GP-ELECTRONIC
ACTUATOR GP-ELECTRONIC
196-9529 ACTUATOR GP-ELECTRONIC
196-9529 ACTUATOR GP-ELECTRONIC
FIELD REPLACEMENT FOR @@@@@107-3576@@@@@
ACTUATOR GP-ELECTRONIC
7E-3335 ACTUATOR GP-ELECTRONIC
7E-3335 ACTUATOR GP-ELECTRONIC
AN ATTACHMENT
102-7506 ACTUATOR GP-GOVERNOR
102-7506 ACTUATOR GP-GOVERNOR
S/N 4EK2540-UP
PART OF 150-1233 CONTROL GP-FUEL RATIO, 106-2447 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
108-4886 ACTUATOR GP-GOVERNOR
108-4886 ACTUATOR GP-GOVERNOR
PART OF 116-3736 ACTUATOR GP-GOVERNOR
ALSO AN ATTACHMENT
116-3736 ACTUATOR GP-GOVERNOR
116-3736 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
154-3855 ACTUATOR GP-GOVERNOR
154-3855 ACTUATOR GP-GOVERNOR
S/N 4EK2375-UP
ALSO AN ATTACHMENT
ACTUATOR GP-GOVERNOR
174-3082 ACTUATOR GP-GOVERNOR
174-3082 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
174-3083 ACTUATOR GP-GOVERNOR
174-3083 ACTUATOR GP-GOVERNOR
PART OF 174-3082 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
178-4529 ACTUATOR GP-GOVERNOR
178-4529 ACTUATOR GP-GOVERNOR
PART OF 178-4530 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
178-4530 ACTUATOR GP-GOVERNOR
178-4530 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
1W-8887 ACTUATOR GP-GOVERNOR
1W-8887 ACTUATOR GP-GOVERNOR
CONTROL AS-GOVERNOR
101-8922 CONTROL AS-GOVERNOR
101-8922 CONTROL AS-GOVERNOR -SPEED CONTROL
PART OF 4P-9566 PANEL GP-CONTROL
AN ATTACHMENT
CONTROL AS-GOVERNOR
118-5449 CONTROL AS-GOVERNOR
118-5449 CONTROL AS-GOVERNOR -SPEED CONTROL
PART OF 4P-9566 PANEL GP-CONTROL
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5451 CONTROL AS-GOVERNOR
131-5451 CONTROL AS-GOVERNOR -SPEED CONTROL
PART OF 133-5095 ACTUATOR GP-ELECTRONIC, 118-7591, 166-9270, 9Y-7584 GOVERNOR GP-ELECTRONIC, 4P-9566 PANEL GP-CONTROL, 194-0908 WIRING GP-PANEL
ALSO AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5452 CONTROL AS-GOVERNOR
131-5452 CONTROL AS-GOVERNOR -SPEED CONTROL
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5457 CONTROL AS-GOVERNOR
131-5457 CONTROL AS-GOVERNOR -SPEED CONTROL
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5567 CONTROL AS-GOVERNOR
131-5567 CONTROL AS-GOVERNOR -LOAD SHARE
AN ATTACHMENT
146-9462 CONTROL AS-GOVERNOR
146-9462 CONTROL AS-GOVERNOR
WOODWARD 701A
FOR USE WITH TANDEM ENGINES
AN ATTACHMENT
168-2572 CONTROL AS-GOVERNOR
168-2572 CONTROL AS-GOVERNOR
AN ATTACHMENT
CONTROL AS-GOVERNOR
293-8356 CONTROL AS-GOVERNOR
293-8356 CONTROL AS-GOVERNOR -LOAD SHARE MODULE
FOR USE WITH G3500, D3500, AND D3600 EPG ENGINE
AN ATTACHMENT
CONTROL AS-GOVERNOR
437-5952 CONTROL AS-GOVERNOR
437-5952 CONTROL AS-GOVERNOR -SPEED CONTROL
AN ATTACHMENT
460-2080 CONTROL AS-GOVERNOR
460-2080 CONTROL AS-GOVERNOR
S/N 4EK3435-UP
PART OF 201-0860 THROTTLE GP
4P-6546 CONTROL AS-GOVERNOR
4P-6546 CONTROL AS-GOVERNOR
AN ATTACHMENT
CONTROL AS-GOVERNOR
7E-2583 CONTROL AS-GOVERNOR
7E-2583 CONTROL AS-GOVERNOR
LOAD SENSOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
144-9534 CONTROL GP-GOVERNOR
144-9534 CONTROL GP-GOVERNOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-0543 CONTROL GP-GOVERNOR
2W-0543 CONTROL GP-GOVERNOR -REMOTE
POSITIVE LOCK
AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
PART OF 143-6142 GOVERNOR GP
AN ATTACHMENT
CONTROL GP-GOVERNOR
4P-5518 CONTROL GP-GOVERNOR
4P-5518 CONTROL GP-GOVERNOR -LOAD SHARE MODULE
AN ATTACHMENT
MOUNTING GP-GOVERNOR ACTUATOR
122-9861 MOUNTING GP-GOVERNOR ACTUATOR
122-9861 MOUNTING GP-GOVERNOR ACTUATOR
AN ATTACHMENT
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
AN ATTACHMENT
FILTER GP-FUEL
4P-4717 FILTER GP-FUEL
4P-4717 FILTER GP-FUEL
AN ATTACHMENT
GOVERNOR GP
166-4454 ACTUATOR AS-GOVERNOR
166-4454 ACTUATOR AS-GOVERNOR
PART OF 174-3083 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
244-5520 ACTUATOR AS-GOVERNOR
244-5520 ACTUATOR AS-GOVERNOR
AIR, FUEL RATIO
AN ATTACHMENT
326-2803 ACTUATOR AS-GOVERNOR
326-2803 ACTUATOR AS-GOVERNOR
FIELD INSTALLATION
ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
7W-1455 ACTUATOR AS-GOVERNOR
S/N 4EK4102-UP
PART OF 9Y-7584 GOVERNOR GP-ELECTRONIC
102-7506 ACTUATOR GP-GOVERNOR
102-7506 ACTUATOR GP-GOVERNOR
S/N 4EK2540-UP
PART OF 150-1233 CONTROL GP-FUEL RATIO, 106-2447 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
108-4886 ACTUATOR GP-GOVERNOR
108-4886 ACTUATOR GP-GOVERNOR
PART OF 116-3736 ACTUATOR GP-GOVERNOR
ALSO AN ATTACHMENT
116-3736 ACTUATOR GP-GOVERNOR
116-3736 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
154-3855 ACTUATOR GP-GOVERNOR
154-3855 ACTUATOR GP-GOVERNOR
S/N 4EK2375-UP
ALSO AN ATTACHMENT
ACTUATOR GP-GOVERNOR
174-3082 ACTUATOR GP-GOVERNOR
174-3082 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
174-3083 ACTUATOR GP-GOVERNOR
174-3083 ACTUATOR GP-GOVERNOR
PART OF 174-3082 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
178-4529 ACTUATOR GP-GOVERNOR
178-4529 ACTUATOR GP-GOVERNOR
PART OF 178-4530 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
178-4530 ACTUATOR GP-GOVERNOR
178-4530 ACTUATOR GP-GOVERNOR
AN ATTACHMENT
1W-8887 ACTUATOR GP-GOVERNOR
1W-8887 ACTUATOR GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
PART OF 1W-8887 ACTUATOR GP-GOVERNOR, 4W-5643, 4W-5644 GOVERNOR GP
ALSO AN ATTACHMENT
DRIVE GP-GOVERNOR
9Y-5896 DRIVE GP-GOVERNOR
9Y-5896 DRIVE GP-GOVERNOR
PART OF 133-5095 ACTUATOR GP-ELECTRONIC, 108-4886, 154-3855, 174-3083, 178-4529 ACTUATOR GP-GOVERNOR, 107-4471 GOVERNOR GP-ELECTRIC, 118-7591, 9Y-6736, 9Y-7584 GOVERNOR GP-ELECTRONIC
ALSO AN ATTACHMENT
GOVERNOR GP
143-6142 GOVERNOR GP
143-6142 GOVERNOR GP
PART OF 4W-5643 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
143-6143 GOVERNOR GP
143-6143 GOVERNOR GP
S/N 4EK1450-UP
PART OF 1W-8887 ACTUATOR GP-GOVERNOR
GOVERNOR GP
143-6144 GOVERNOR GP
143-6144 GOVERNOR GP
PART OF 4W-5644 GOVERNOR GP
AN ATTACHMENT
240-0203 GOVERNOR GP
240-0203 GOVERNOR GP
AN ATTACHMENT
4W-5643 GOVERNOR GP
4W-5643 GOVERNOR GP
3161 SYNCHRONIZED MOTOR-RH
AN ATTACHMENT
4W-5644 GOVERNOR GP
4W-5644 GOVERNOR GP
PNEUMATIC-RH
AN ATTACHMENT
107-4471 GOVERNOR GP-ELECTRIC
107-4471 GOVERNOR GP-ELECTRIC
Type 1
AN ATTACHMENT
GOVERNOR GP-ELECTRIC
107-4471 GOVERNOR GP-ELECTRIC
107-4471 GOVERNOR GP-ELECTRIC
Type 2
AN ATTACHMENT
GOVERNOR GP-ELECTRIC
139-4744 GOVERNOR GP-ELECTRIC
139-4744 GOVERNOR GP-ELECTRIC
S/N 4EK1300-3434
GOVERNOR GP-ELECTRIC
201-0861 GOVERNOR GP-ELECTRIC
201-0861 GOVERNOR GP-ELECTRIC
S/N 4EK3435-UP
118-7591 GOVERNOR GP-ELECTRONIC
118-7591 GOVERNOR GP-ELECTRONIC
S/N 4EK385-UP
ALSO AN ATTACHMENT
166-9270 GOVERNOR GP-ELECTRONIC
166-9270 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
9Y-6736 GOVERNOR GP-ELECTRONIC
9Y-6736 GOVERNOR GP-ELECTRONIC
CANNOT BE USED WITH LANDFILL ENGINE ARS
AN ATTACHMENT
9Y-7584 GOVERNOR GP-ELECTRONIC
9Y-7584 GOVERNOR GP-ELECTRONIC
236-7516 KIT-GOVERNOR SHAFT
236-7516 KIT-GOVERNOR SHAFT
STAINLESS STEEL SHAFT
FIELD INSTALLATION
MOUNTING GP-GOVERNOR ACTUATOR
122-9861 MOUNTING GP-GOVERNOR ACTUATOR
122-9861 MOUNTING GP-GOVERNOR ACTUATOR
AN ATTACHMENT
TUBE
173-1800 TUBE
173-1800 TUBE
3.76-MM ID, 4.52-MM OD. TEFLON
FIELD REPLACEMENT FOR 2W-0242 TUBE-TEFLON
FIELD INSTALLATION
LINES GP-FUEL
CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
6I-4413 CONVERSION GP-GAS
PART OF 102-0000 CONVERSION AR, 6I-4412 CONVERSION AR-ENGINE
FOR USE WITH CONVERSION FROM NATURAL GAS TO PROPANE
AN ATTACHMENT
LINES GP-FUEL
170-0986 LINES GP-FUEL
170-0986 LINES GP-FUEL
Type 1
AN ATTACHMENT
LINES GP-FUEL
170-0986 LINES GP-FUEL
170-0986 LINES GP-FUEL
Type 2
AN ATTACHMENT
LINES GP-FUEL
215-2581 LINES GP-FUEL
215-2581 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
328-2643 LINES GP-FUEL
328-2643 LINES GP-FUEL
PART OF 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
LINES GP-FUEL
342-4492 LINES GP-FUEL
342-4492 LINES GP-FUEL
PART OF 381-0874 CONVERSION AR-ENGINE
LINES GP-FUEL
453-5289 LINES GP-FUEL
453-5289 LINES GP-FUEL
PART OF 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
LINES GP-FUEL
453-5291 LINES GP-FUEL
453-5291 LINES GP-FUEL
PART OF 381-0874 CONVERSION AR-ENGINE
LINES GP-GAS
110-7873 LINES GP-GAS
110-7873 LINES GP-GAS
S/N 4EK307-UP
LINES GP-GAS
132-5543 LINES GP-GAS
132-5543 LINES GP-GAS
S/N 4EK2389-UP
ALSO AN ATTACHMENT
LINES GP-GAS
150-1232 LINES GP-GAS
150-1232 LINES GP-GAS
S/N 4EK2540-5271
LINES GP-GAS
150-1232 LINES GP-GAS
150-1232 LINES GP-GAS
S/N 4EK5272-UP
LINES GP-GAS
184-1574 LINES GP-GAS
184-1574 LINES GP-GAS
S/N 4EK2932-UP
LINES GP-GAS
7E-8191 LINES GP-GAS
7E-8191 LINES GP-GAS
S/N 4EK1-123; 4EK169-UP
VALVE GP-FUEL
472-8429 VALVE GP-FUEL
472-8429 VALVE GP-FUEL
PART OF 381-0874, 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP AS-FUEL TRANSFER
141-7898 PUMP AS-FUEL TRANSFER
141-7898 PUMP AS-FUEL TRANSFER
PART OF 170-0397 TANK AS-FUEL
AN ATTACHMENT
PUMP AS-FUEL TRANSFER
170-4007 PUMP AS-FUEL TRANSFER
170-4007 PUMP AS-FUEL TRANSFER
PART OF 141-7898 PUMP AS-FUEL TRANSFER
AN ATTACHMENT
PUMP GP-UNIT INJECTOR HYD
VALVE GP-FUEL
472-8429 VALVE GP-FUEL
472-8429 VALVE GP-FUEL
PART OF 381-0874, 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
133-0558 KIT-GAS VALVE
133-0558 KIT-GAS VALVE
FOR USE WITH 11:1 COMPRESSION AT 1200 RPM WITH RICH BURN
FIELD INSTALLATION
REGULATOR AS-GAS PRESSURE
335-5764 REGULATOR AS-GAS PRESSURE
335-5764 REGULATOR AS-GAS PRESSURE
PART OF 155-1724, 251-9480, 7E-3404 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
7E-3407 REGULATOR AS-GAS PRESSURE
PART OF 106-2447, 155-1724, 251-9480, 7E-3404 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
100-8227 REGULATOR GP-GAS PRESSURE
100-8227 REGULATOR GP-GAS PRESSURE
PART OF 2W-5710, 4P-9090 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
106-2447 REGULATOR GP-GAS PRESSURE
106-2447 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
118-7553 REGULATOR GP-GAS PRESSURE
118-7553 REGULATOR GP-GAS PRESSURE
S/N 4EK500-1729
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
150-1791 REGULATOR GP-GAS PRESSURE
150-1791 REGULATOR GP-GAS PRESSURE
S/N 4EK1730-UP
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
150-1792 REGULATOR GP-GAS PRESSURE
150-1792 REGULATOR GP-GAS PRESSURE
S/N 4EK1730-UP
PART OF 150-1791 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
155-1724 REGULATOR GP-GAS PRESSURE
155-1724 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
155-1724 REGULATOR GP-GAS PRESSURE
155-1724 REGULATOR GP-GAS PRESSURE
S/N 4EK1-5263
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
155-1724 REGULATOR GP-GAS PRESSURE
155-1724 REGULATOR GP-GAS PRESSURE
S/N 4EK5264-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
160-7740 REGULATOR GP-GAS PRESSURE
160-7740 REGULATOR GP-GAS PRESSURE
S/N 4EK2540-5271
REGULATOR GP-GAS PRESSURE
160-7740 REGULATOR GP-GAS PRESSURE
160-7740 REGULATOR GP-GAS PRESSURE
S/N 4EK5272-UP
REGULATOR GP-GAS PRESSURE
210-2007 REGULATOR GP-GAS PRESSURE
210-2007 REGULATOR GP-GAS PRESSURE
PART OF 453-5289 LINES GP-FUEL, 328-2644 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
251-9480 REGULATOR GP-GAS PRESSURE
251-9480 REGULATOR GP-GAS PRESSURE
S/N 4EK1-5263
FOR USE WITH HIGH PRESSURE GAS AIR/FUEL RATIO CONTROL
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
251-9480 REGULATOR GP-GAS PRESSURE
251-9480 REGULATOR GP-GAS PRESSURE
S/N 4EK5264-UP
FOR USE WITH HIGH PRESSURE GAS AIR/FUEL RATIO CONTROL
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
2W-5710 REGULATOR GP-GAS PRESSURE
2W-5710 REGULATOR GP-GAS PRESSURE
LANDFILL
REGULATOR GP-GAS PRESSURE
328-2644 REGULATOR GP-GAS PRESSURE
328-2644 REGULATOR GP-GAS PRESSURE
PART OF 383-7682 CONVERSION AR-ENGINE
Type 1
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
328-2644 REGULATOR GP-GAS PRESSURE
328-2644 REGULATOR GP-GAS PRESSURE
PART OF 383-7682 CONVERSION AR-ENGINE
Type 2
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
328-2644 REGULATOR GP-GAS PRESSURE
328-2644 REGULATOR GP-GAS PRESSURE
PART OF 383-7682 CONVERSION AR-ENGINE
Type 3
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
4P-9090 REGULATOR GP-GAS PRESSURE
4P-9090 REGULATOR GP-GAS PRESSURE
S/N 4EK737-UP
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
7C-5001 REGULATOR GP-GAS PRESSURE
7C-5001 REGULATOR GP-GAS PRESSURE
S/N 4EK500-1729
PART OF 118-7553 REGULATOR GP-GAS PRESSURE
ALSO AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
7E-3404 REGULATOR GP-GAS PRESSURE
7E-3404 REGULATOR GP-GAS PRESSURE
Type 1
REGULATOR GP-GAS PRESSURE
7E-3404 REGULATOR GP-GAS PRESSURE
7E-3404 REGULATOR GP-GAS PRESSURE
Type 2
REGULATOR GP-GAS PRESSURE
7E-8190 REGULATOR GP-GAS PRESSURE
7E-8190 REGULATOR GP-GAS PRESSURE
S/N 4EK1-123; 4EK169-UP
SEPARATOR GP-WATER
SEPARATOR GP-WATER
4P-7380 SEPARATOR GP-WATER
4P-7380 SEPARATOR GP-WATER -PRIMARY FUEL FILTER
PART OF 170-0397 TANK AS-FUEL
AN ATTACHMENT
SHUTOFF GP
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
PART OF 7E-3223 VALVE GP-SOLENOID
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
TANK GP-FUEL
TANK AS-FUEL
170-0397 TANK AS-FUEL
170-0397 TANK AS-FUEL
660 GALLON DOUBLE WALL TANK WITH FUEL TRANSFER AND DUAL WATER/FUEL SEPARATOR
PART OF 170-0396 TANK GP-FUEL
AN ATTACHMENT
170-0396 TANK GP-FUEL
170-0396 TANK GP-FUEL
660 GALLON DOUBLE WALL WITH DUAL FUEL/WATER SEPARATORS WITH A FUEL TRANSFER SYSTEM
FOR USE WITH POWER MODULES
AN ATTACHMENT
THROTTLE GP
THROTTLE GP
121-7551 THROTTLE GP
121-7551 THROTTLE GP
S/N 4EK457-UP
THROTTLE GP
121-7551 THROTTLE GP
121-7551 THROTTLE GP
S/N 4EK500-UP
THROTTLE GP
127-7489 THROTTLE GP
127-7489 THROTTLE GP
S/N 4EK1300-UP
PART OF 133-7603 THROTTLE GP
THROTTLE GP
133-7603 THROTTLE GP
133-7603 THROTTLE GP
S/N 4EK1300-3434
THROTTLE GP
201-0860 THROTTLE GP
201-0860 THROTTLE GP
S/N 4EK3435-UP
THROTTLE GP
240-8926 THROTTLE GP
240-8926 THROTTLE GP
PART OF 334-2678 CARBURETOR AS
ALSO AN ATTACHMENT
THROTTLE GP
241-6968 THROTTLE GP
241-6968 THROTTLE GP
PART OF 121-7551, 7E-9202 THROTTLE GP
ALSO AN ATTACHMENT
THROTTLE GP
328-2648 THROTTLE GP
328-2648 THROTTLE GP
PART OF 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
THROTTLE GP
344-7455 THROTTLE GP
344-7455 THROTTLE GP
PART OF 381-0874 CONVERSION AR-ENGINE
THROTTLE GP
460-2083 THROTTLE GP
460-2083 THROTTLE GP -ACTUATOR
S/N 4EK3435-UP
PART OF 201-0860 THROTTLE GP
THROTTLE GP
7E-1585 THROTTLE GP
7E-1585 THROTTLE GP
S/N 4EK2540-UP
PART OF 150-1232 LINES GP-GAS
THROTTLE GP
7E-1586 THROTTLE GP
7E-1586 THROTTLE GP
PART OF 9Y-3834 CARBURETOR GP
ALSO AN ATTACHMENT
THROTTLE GP
7E-9201 THROTTLE GP
7E-9201 THROTTLE GP
PART OF 121-7551, 7E-9202 THROTTLE GP
ALSO AN ATTACHMENT
THROTTLE GP
7E-9202 THROTTLE GP
7E-9202 THROTTLE GP
S/N 4EK1-123; 4EK169-UP
ALSO AN ATTACHMENT
THROTTLE GP
7E-9202 THROTTLE GP
7E-9202 THROTTLE GP
ALSO AN ATTACHMENT
VALVE GP
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
PART OF 7E-3223 VALVE GP-SOLENOID
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
VALVE GP-FUEL
472-8429 VALVE GP-FUEL
472-8429 VALVE GP-FUEL
PART OF 381-0874, 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
VALVE GP-CONTROL
VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
133-7592 VALVE GP-GAS CONTROL
S/N 4EK737-UP
PART OF 100-7478 CARBURETOR AS
ALSO AN ATTACHMENT
VALVE GP-GAS CONTROL
418-7744 VALVE GP-GAS CONTROL
418-7744 VALVE GP-GAS CONTROL
PART OF 381-0874 CONVERSION AR-ENGINE
VALVE GP-GAS CONTROL
453-6077 VALVE GP-GAS CONTROL
453-6077 VALVE GP-GAS CONTROL
PART OF 381-0874, 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
7E-1598 VALVE GP-GAS CONTROL
PART OF 100-7478, 334-2678 CARBURETOR AS, 9Y-3834 CARBURETOR GP
ALSO AN ATTACHMENT
VALVE GP-SOLENOID
VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID -GAS SHUTOFF
S/N 4EK640-UP
24-VOLT
PART OF 9Y-6992 VALVE GP-SOLENOID
ALSO AN ATTACHMENT
VALVE GP-SOLENOID
378-8458 VALVE GP-SOLENOID
378-8458 VALVE GP-SOLENOID
24-VOLT
PART OF 328-2644 REGULATOR GP-GAS PRESSURE
FIELD REPLACEMENT ORDER @@@@@419-0893@@@@@
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
New Components In Carburetor Control Groups Makes Adjustments Easier {1266}
1995/04/01
New 124-6325 Bearing Kit Available For Carburetor Service{1266}
1995/09/01
New Mixer Assembly Provides Better Startability And Idle Stability {1266}
1996/09/23
Addition Of Sleeve And Removal Of Setscrew Prevents Binding Of Control Shaft {1266,7558}
1996/09/23
Washers Available Within The Conversion Group (Landfill Carburetor) For Spacing Of Valves{1283,7553}
1997/10/10
Be Sure To Use Correct Valve When Replacing The Mixer Assembly In Carburetor Group {1266}
1997/12/16
New Rods Ends Used In Carburetor Control Groups{1265,1266}
1998/05/01
Conversion Group Components Changed To Allow 400 To 450 BTU Fuel Usage{1266}
1998/05/01
Be Sure To Order The Correct Diaphragm For Servicing The Mixer Of The Carburetor {1266}
2002/03/01
New Parts Are Available for the Throttle {1266, 1269}
2003/12/01
Shims Are Now Used in the Carburetors of G3516 Engines {1266}
2009/02/02
Systems Operation
Carburetor
G3500 Engines
Testing and Adjusting
Carburetor - Adjust
G3500 Engines
Air/Fuel Ratio Control - Adjust
G3500 Engines
Disassembly and Assembly
Carburetor - Remove - High Pressure
G3500 Engines
Carburetor - Remove - Low Pressure
G3500 Engines
Carburetor - Install - High Pressure
G3500 Engines
Carburetor - Install - Low Pressure
G3500 Engines
Carburetor - Disassemble - High Pressure
G3500 Engines
Carburetor - Assemble - High Pressure
G3500 Engines
Service Magazine
Adjustment Of 60670 Idle Air Lines Group (Idle Bleed Circuit){1266}
1993/04/12
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Correction to Troubleshooting &quot;Fuel Actuator&quot; {1716}
2005/04/11
Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2009/07/13
Troubleshooting
MID 014 - CID 0329 - FMI 11 Communication Fault with CAT A/F Ratio Control
G3500 Engines
MID 018 - CID 0576 - FMI 02 Heinzmann Actuator not controlling position
G3500 Engines
MID 018 - CID 0577 - FMI 11 Heinzmann Actuator Calculated Gain out of range
G3500 Engines
MID 018 - CID 0578 - FMI 11 Heinzmann Actuator Calculated Offset out of range
G3500 Engines
Fuel Actuator
G3500 Engines
Disassembly and Assembly
Fuel Control Actuator - Remove and Install
G3500 Engines
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Conversion Gas Valve Kits Available{1278}
1996/10/01
New High Pressure Air/Fuel Ratio Control (AFRC) Actuator Available For Operations In Wet Locations {1278}
1999/05/01
New Wiring Harness Assemblies Are Available To Service Engines Equipped With An Air Fuel Ratio Control (AFRC) Valve {1278, 1408}
2000/08/01
Correction to Electronic Troubleshooting, SENR6517, "G3500 Air/Fuel Ratio Control" {1278}
2002/01/01
Systems Operation
Air/Fuel Ratio Control
G3500 Engines
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Improved Woodward EG3P Actuator Assembly Is Available{1264,1265,1716}
1999/09/01
Reference For Springs For The Pneumatic Speed Control Setting On Woodward 3161 Governors {1915}
2001/06/01
Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2009/07/13
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Speed Controller and Actuator Are Available for Certain G3400 and G3500 Engines {1264, 1716, 1908}
2015/09/25
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Carburetor Control Linkage - 3161 Governor
G3500 Engines
Carburetor Control Linkage - EG3P Governor
G3500 Engines
Actuator Linkage - Air/Fuel Ratio Control
G3500 Engines
Service Magazine
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Fuel Priming Pump Used
1987/05/01
New Oil Filter Shield And Shield Mounting Screws Used In Oil Filter Base Assemblies {1306}
1995/05/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Fuel Filter Differential Pressure - Check
G3500 Engines
Fuel Filtration System - Service
G3500 Engines
Special Instruction
Installation and Maintenance of the Microfilter for Natural Gas {1261}
Installation and Maintenance of the Microfilter for Natural Gas {1261}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/11/01
Special Instruction
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Service Instructions For 7C-3018 Governor Orifice {1264}
1998/11/01
Improved Woodward EG3P Actuator Assembly Is Available{1264,1265,1716}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Electronic Actuator Is Used In Gas Pressure Regulator Groups That Are On Engines That Have Air/Fuel Ratio Control Systems {1716}
2000/12/01
Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2009/07/13
A New Speed Controller and Actuator Are Available for Certain G3400 and G3500 Engines {1264, 1716, 1908}
2015/09/25
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
G3500 Engines
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Governor Drive
G3500 Engines
Actuator Linkage - Air/Fuel Ratio Control
G3500 Engines
Systems Operation
Systems Operation
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Governor
G3500 Engines
Testing and Adjusting
Testing &amp; Adjusting
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Troubleshooting
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Service Magazine
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Conversion Gas Valve Kits Available{1278}
1996/10/01
Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
2013/01/03
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
A Two Piece Clip and Grommet for the Fuel Lines Are Now Used On Certain Commercial Engines {1250, 1250, 7553}
2013/08/30
A New Gas Shut-Off Valve Coil Assembly is Now Used on Certain G3500 and G3600 Series Gas Engines {1274, 1329}
A New Gas Shut-Off Valve Coil Assembly is Now Used on Certain G3500 and G3600 Series Gas Engines {1274, 1329}
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
Service Letter-Americas
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/11/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/05/29
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Gas Engine Fuel Specifications {1280}
1998/01/20
Be Sure To Use The Correct Gas Fuel Pressure{1250,1270,1293}
1999/04/01
Operation and Maintenance Manual
Cold Weather Operation
SR500 Generators
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New 7X1400 Digital Diagnostic Tool (DDT) Group Available {0782,0785,1900}
1990/11/12
Adjustment Of 60670 Idle Air Lines Group (Idle Bleed Circuit){1266}
1993/04/12
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Service Magazine
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Service Magazine
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/05/29
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Troubleshooting
Noise Coming from Cylinder
G3500 Engines
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Engine News
Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
2013/01/03
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Engine News
New Check Valve Available{1063,1355}
1994/04/18
New Water And Oil Temperature Regulators Available{1330,1355}
1994/12/01
Serviceable Parts Available for Sprague Gas Pressure Regulator Assembly{1270}
1995/09/01
The Components Of The 7C-5001, 100-8227, And 104-6775 Gas Pressure Regulator Groups Are Available For Parts Service{1270}
1997/03/01
New O-Ring Seal Used In Landfill Regulator Groups {1270}
1997/12/16
Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}
1999/02/01
Be Sure To Use The Correct Gas Fuel Pressure{1250,1270,1293}
1999/04/01
Changes To High Pressure Gas Regulator Assembly Provide Improved Response{1270,1283}
1999/05/01
Service Repair Kits Available For Deltec&reg; Gas Pressure Regulators{1270}
1999/09/01
An Improved Gas Pressure Regulator Is Used {1270}
2009/02/02
New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270}
New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
Operation and Maintenance Manual
Gas Pressure Regulator Condensation - Drain
G3500 Engines
Gas Pressure Regulator - Check
G3500 Engines
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING 330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES
Specifications
Gas Pressure Regulator
G3500 Engines
Gas Pressure Regulator
G3500 Engines
Gas Pressure Regulator
G3500 Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
Service Letter-Asia
Systems Operation
Gas Pressure Regulator
G3500 Engines
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES
Testing and Adjusting
Gas Pressure
G3500 Engines
Disassembly and Assembly
Gas Pressure Regulator Solenoid - Remove and Install
G3500 Engines
Gas Pressure Regulator - Remove - Low Pressure
G3500 Engines
Gas Pressure Regulator - Install - Low Pressure
G3500 Engines
Gas Pressure Regulator - Remove - High Pressure
G3500 Engines
Gas Pressure Regulator - Install - High Pressure
G3500 Engines
Gas Pressure Regulator - Disassemble
G3500 Engines
Gas Pressure Regulator - Assemble
G3500 Engines
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
New Solenoid Valve Group (Gas Shutoff) Provides Improved Reliability {1704}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Emergency Stopping
G3500 Engines
Manual Stop Procedure
G3500 Engines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Engine News
New Parts Are Available for the Throttle {1266, 1269}
2003/12/01
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269}
An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269}
Special Instruction
Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Service Tools For Electronic Controls{0781,0782}
1994/05/01
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New 7X1400 Digital Diagnostic Tool (DDT) Group Available {0782,0785,1900}
1990/11/12
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Engine News
Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
2013/01/03
A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}
2013/01/03
Troubleshooting
Fuel Metering Valve
G3500 Engines
Disassembly and Assembly
Fuel Control Valve - Remove and Install
G3500 Engines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.