AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

115-5159 CYLINDER BLOCK GP S/N 4EK5272-UP G3516 GAS ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

GAS ENGINE G3516 GAS ENGINE 4EK
 G3516 Engine Electronic Ignition System 4EK00001-UP SEBP2185 G3516 4EK   (1992)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-1245 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5159 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5159 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5160 CYLINDER BLOCK GP
CYLINDER BLOCK GP
353-3971 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7264 CYLINDER BLOCK GP
 

#SEBP21850080
 

115-5159: CYLINDER BLOCK GP

115-5159 CYLINDER BLOCK GP
S/N 4EK5272-UP
i03831469 SEBP2185
1155159 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 350-1417 CY [1] CYLINDER BLOCK AS  
2. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
3. 9S-4191 [6] PLUG (9/16-18-THD)  
4. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
6. 1B-2790 [16] BOLT (5/16-18X1.375-IN)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
13. 116-3254 [16] JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY)  
14. 0T-0102 [16] BOLT (3/8-16X0.625-IN)  
15. 116-1359 [18] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [26] PLUG-PIPE (1/4-18-THD)  
18. 1W-4188 [16] RETAINER AS (FOR USE WITH 1-PC PISTON ONLY)  
    (EACH INCLUDES)
  8N-9943 [1] RETAINER  
  6V-3537 [1] DOWEL  
19. 8T-0099 [32] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 197-7008 [16] DOWEL  
22. 5P-0840 [32] SEAL-O-RING  
23. 144-5692 [16] GASKET-PLATE  
24. 110-6994 [16] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [2] SEAL-O-RING  
27. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
28. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8N-8056 [2] COVER  
30. 6V-3348 [8] SEAL-O-RING  
33. 214-7568 [6] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850081
 

115-5160: CYLINDER BLOCK GP

115-5160 CYLINDER BLOCK GP
S/N 4EK374-UP
FIELD REPLACEMENT FOR @@@@@101-1173@@@@@
i00093340 SEBP2185
1155160 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2780 Y [1] CYLINDER BLOCK AS  
2. 9S-4191 [6] PLUG (9/16-18-THD)  
3. 033-6042 [6] SEAL-O-RING  
4. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
5. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
6. 8T-6763 [26] PLUG-PIPE (1/4-18-THD)  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 7N-5641 [2] PLUG-MANIFOLD  
10. 5F-9657 [4] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850082
 

353-3971: CYLINDER BLOCK GP

353-3971 CYLINDER BLOCK GP
S/N 4EK5272-UP
FIELD REPLACEMENT FOR @@@@@350-1417@@@@@
FOR USE WITH 339-4950 SEAL-LINER, 8N-4707 BAND-FILLER
i03811038 SEBP2185
3533971 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2940 [8] PLUG  
2. 7N-5641 [2] PLUG-MANIFOLD  
3. 350-1393 Y [1] CYLINDER BLOCK AS  
4. 214-7568 [6] SEAL-O-RING  
5. 5F-9657 [4] SEAL-O-RING  
6. 6V-3348 [8] SEAL-O-RING  
7. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
8. 8T-6762 [4] PLUG-PIPE (1/2-14-THD)  
9. 8T-6763 [26] PLUG-PIPE (1/4-18-THD)  
10. 9S-4191 [6] PLUG (9/16-18-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850083
 

4P-7264: CYLINDER BLOCK GP

4P-7264 CYLINDER BLOCK GP
S/N 4EK1-25
FIELD REPLACEMENT FOR @@@@@ 7E-4937@@@@@
i00091539 SEBP2185
4P7264 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 9S-4191 [6] PLUG (9/16-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 033-6042 [6] SEAL-O-RING  
 

#SEBP21850084
 

4P-8349: CYLINDER BLOCK GP

4P-8349 CYLINDER BLOCK GP
S/N 4EK1-25
i00371574 SEBP2185
4P8349 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-4937 Y [1] CYLINDER BLOCK AS  
2. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
3. 9S-4191 [6] PLUG (9/16-18-THD)  
4. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
6. 1B-2790 [16] BOLT (5/16-18X1.375-IN)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
13. 9Y-4121 [16] JET AS-PISTON COOLING  
    (EACH INCLUDES)
  [1] JET AS-PISTON COOLING  
  4D-0514 [1] PLUG-PIPE  
14. 0T-0102 [16] BOLT (3/8-16X0.625-IN)  
15. 7N-2048 [18] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [28] PLUG-PIPE (1/4-18-THD)  
18. 1W-4188 [16] RETAINER AS (FOR USE WITH 1-PC PISTON ONLY)  
    (EACH INCLUDES)
  8N-9943 [1] RETAINER  
  6V-3537 [1] DOWEL  
19. 8T-0099 [32] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 7N-2049 [16] DOWEL  
22. 5P-0840 [32] SEAL-O-RING  
23. 100-7886 [16] GASKET-PLATE  
24. 9Y-1485 [16] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [2] SEAL-O-RING  
27. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
28. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8N-8056 [2] COVER  
30. 6V-3348 [8] SEAL-O-RING  
31. 8T-2928 [2] SEAL-O-RING  
32. 8T-2929 [2] SEAL-O-RING  
33. 033-6042 [6] SEAL-O-RING  
34. 4W-4813 [2] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850085
 

4P-8349: CYLINDER BLOCK GP

4P-8349 CYLINDER BLOCK GP
S/N 4EK26-373
i00371579 SEBP2185
4P8349 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1228 Y [1] CYLINDER BLOCK AS  
2. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
3. 9S-4191 [6] PLUG (9/16-18-THD)  
4. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
5. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
6. 1B-2790 [16] BOLT (5/16-18X1.375-IN)  
7. 2W-2940 [8] PLUG  
8. 7N-2044 [2] DOWEL  
9. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
10. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7N-2047 [3] DOWEL  
12. 7X-4805 [3] SEAL-O-RING  
13. 9Y-4121 [16] JET AS-PISTON COOLING  
    (EACH INCLUDES)
  [1] JET AS-PISTON COOLING  
  4D-0514 [1] PLUG-PIPE  
14. 0T-0102 [16] BOLT (3/8-16X0.625-IN)  
15. 7N-2048 [18] BEARING-CAMSHAFT  
16. 4N-0683 [2] DOWEL  
17. 8T-6763 [26] PLUG-PIPE (1/4-18-THD)  
18. 1W-4188 [16] RETAINER AS (FOR USE WITH 1-PC PISTON ONLY)  
    (EACH INCLUDES)
  8N-9943 [1] RETAINER  
  6V-3537 [1] DOWEL  
19. 8T-0099 [32] DOWEL  
20. 7N-5641 [2] PLUG-MANIFOLD  
21. 7N-2049 [16] DOWEL  
22. 5P-0840 [32] SEAL-O-RING  
23. 110-6992 [16] GASKET-PLATE  
24. 110-6994 [16] PLATE-SPACER  
25. 5F-9657 [4] SEAL-O-RING  
26. 5P-8210 [2] SEAL-O-RING  
27. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
28. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8N-8056 [2] COVER  
30. 6V-3348 [8] SEAL-O-RING  
31. 8T-2928 [2] SEAL-O-RING  
32. 8T-2929 [2] SEAL-O-RING  
33. 033-6042 [6] SEAL-O-RING  
34. 4W-4813 [2] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850086
 

122-5961: CYLINDER HEAD AS

122-5961 CYLINDER HEAD AS
S/N 4EK457-UP
PART OF 126-8202 CYLINDER HEAD AS, 122-5945 CYLINDER HEAD GP
i00520390 SEBP2185
1225961 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 184-5494 [2] GUIDE-VALVE (EXHAUST)  
3. 184-5495 [2] GUIDE-VALVE (INLET)  
4. 122-5963 [2] INSERT-VALVE SEAT  
5. 3B-0645 [5] PLUG-CUP  
6. 3J-7354 [2] SEAL-O-RING  
7. 6I-1713 [2] INSERT-VALVE SEAT  
8. 3B-0623 [5] PLUG-CUP  
9. 9S-8002 [2] PLUG (7/16-20-THD)  
10. 4P-6925 [1] SLEEVE-OIL  
 

#SEBP21850087
 

122-8851: CYLINDER HEAD AS

122-8851 CYLINDER HEAD AS
PART OF 123-8650 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER 123-6072 CYLINDER HEAD AS
ALSO AN ATTACHMENT
i00512878 SEBP2185
1228851 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6883 [2] GUIDE-VALVE  
2. 4P-6571 Y [1] CYLINDER HEAD AS  
3. 9Y-6882 [2] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850088
 

123-6072: CYLINDER HEAD AS

123-6072 CYLINDER HEAD AS
S/N 4EK370-UP
FIELD REPLACEMENT FOR 122-8851 CYLINDER HEAD AS
i01401385 SEBP2185
1236072 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-6409 Y [1] CYLINDER HEAD AS  
2. 7N-1902 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850089
 

126-8202: CYLINDER HEAD AS

126-8202 CYLINDER HEAD AS
FIELD INSTALLATION
i00515188 SEBP2185
1268202 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-5961 Y [1] CYLINDER HEAD AS  
2. 7N-1902 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Checking Or Adjusting Valve Clearances
1986/01/01
New O-ring Seal Used On Cylinder Block Covers
1993/10/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
New Cylinder Blocks Made From Stronger Alloy{1201}
1994/12/01
"Narrow Flange" Cylinder Liner Available For Service Repair {1216,1201}
1995/03/01
Improved Spacer Plate Provides Visual Indication Of Use Of "Wide Flange" Cylinder Liners {1221}
1995/05/01
Information For Ordering Replacement Cylinder Block For Engine{1201}
1995/06/01
New Liner Seat Inserts Allow Cylinder Blocks With Deeper Liner Seat Cracks To Be Salvaged{1201,1217}
1995/07/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Improved Cylinder Liner Has Longer Service Life{1216}
1997/05/01
Self-Locking Bolt Used On Cylinder Block Cover Groups{7553}
1997/09/15
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2011/07/29
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2013/08/21
An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
2014/10/10
Cat<SUP>&reg;</SUP> Reman Has Added New Cylinder Block Groups for Certain 3500 and G3500 Commercial Engines {1000, 1201}
2014/10/31
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Operation and Maintenance Manual
Cylinder Pressure - Measure/Record
G3500 Engines
Cylinders - Inspect
G3500 Engines
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Ordering &quot;Series B&quot; Replacement Cylinder Blocks for 3500 Series Engines{1201}
Ordering "Series B" Replacement Cylinder Blocks for 3500 Series Engines{1201}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Technical Information Bulletin
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Specifications
Cylinder Liner
G3500 Engines
Connecting Rod
G3500 Engines
Piston and Rings
G3500 Engines
Connecting Rod
G3500 Engines
Cylinder Block
G3500 Engines
Piston and Rings
G3500 Engines
Systems Operation
Cylinder Block, Liners and Heads
G3500 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS
CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS
Testing and Adjusting
Cylinder Liner Projection
G3500 Engines
Cylinder Block
G3500 Engines
Disassembly and Assembly
Bearing Clearance - Check
G3500 Engines
Crankshaft Main Bearings - Remove
G3500 Engines
Crankshaft Main Bearings - Install
G3500 Engines
Cylinder Liner - Remove
G3500 Engines
Cylinder Liner - Install
G3500 Engines
Camshaft Bearings - Remove
G3500 Engines
Camshaft Bearings - Install
G3500 Engines
Connecting Rod Bearings - Remove and Install
G3500 Engines
Piston Cooling Jets - Remove and Install
G3500 Engines
Spacer Plate - Remove and Install
G3500 Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05

Caterpillar Parts SIS Catalog G3516 :

CYLINDER BLOCK GP
115-5159 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-1245 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7E-4937 CYLINDER BLOCK AS
CYLINDER BLOCK AS
350-1417 CYLINDER BLOCK AS
CYLINDER BLOCK AS
350-1393 CYLINDER BLOCK AS
CYLINDER BLOCK AS
106-2780 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1242 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1228 CYLINDER BLOCK AS
CYLINDER BLOCK GP
115-5160 CYLINDER BLOCK GP
CYLINDER BLOCK GP
353-3971 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7264 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-8349 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-8349 CYLINDER BLOCK GP
CYLINDER HEAD AS
122-5961 CYLINDER HEAD AS
CYLINDER HEAD AS
122-8851 CYLINDER HEAD AS
CYLINDER HEAD AS
123-6072 CYLINDER HEAD AS

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.