AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

318-7217 CYLINDER HEAD GP LOW SWIRL PART OF 381-0874, 383-7682 CONVERSION AR-ENGINE AN ATTACHMENT G3516


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

GAS ENGINE G3516 GAS ENGINE 4EK
 G3516 Engine Electronic Ignition System 4EK00001-UP SEBP2185 G3516 4EK   (1992)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
248-5030 CYLINDER HEAD GP
CYLINDER HEAD GP
248-5031 CYLINDER HEAD GP
CYLINDER HEAD GP
318-7217 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6569 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6569 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6570 CYLINDER HEAD GP
 

#SEBP21850130
 

318-7217: CYLINDER HEAD GP

318-7217 CYLINDER HEAD GP
LOW SWIRL
PART OF 381-0874, 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
i02885921 SEBP2185
3187217 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-2126 [1] CONNECTOR (THERMOCOUPLE)  
2. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
2A. 7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
2B. 187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
3. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
3A. 7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
3B. 9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
3C. 187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 420-0652 [4] SEAL AS-WATER  
5. 420-0653 [4] SEAL AS-WATER  
6. 206-1561 Y [1] CYLINDER HEAD GP  
7. 110-6991 [1] GASKET-CYLINDER HEAD  
8. 8T-6759 [1] PLUG-PIPE  
9. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
10. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850131
 

4P-6569: CYLINDER HEAD GP

4P-6569 CYLINDER HEAD GP
S/N 4EK1-170
i00384602 SEBP2185
4P6569 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 [1] PLUG-PIPE  
2. 7N-1961 [8] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
3. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
5. 101-1188 [1] GASKET-CYLINDER HEAD  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4P-6570 Y [1] CYLINDER HEAD GP  
8. 6I-1357 [4] SEAL  
9. 6I-1356 [4] SEAL  
10. 9Y-0635 [2] SPACER (19.35X30.18X45-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850132
 

4P-6569: CYLINDER HEAD GP

4P-6569 CYLINDER HEAD GP
S/N 4EK171-3742
i00384604 SEBP2185
4P6569 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 [1] PLUG-PIPE  
2. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
3. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
4. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
5. 110-6991 [1] GASKET-CYLINDER HEAD  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4P-6570 Y [1] CYLINDER HEAD GP  
8. 126-1112 [4] SEAL  
9. 126-1113 [4] SEAL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850133
 

4P-6570: CYLINDER HEAD GP

4P-6570 CYLINDER HEAD GP
PART OF 4P-6569 CYLINDER HEAD GP
i00384606 SEBP2185
4P6570 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-6571 Y [1] CYLINDER HEAD AS  
2. 7N-1903 [4] SPRING-VALVE INNER  
3. 2W-2662 [4] SEAT-SPRING  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 133-3814 [4] ROTOCOIL AS  
6. 2A-4429 [8] LOCK-RETAINER  
7. 104-7184 [4] VALVE  
8. 7N-1902 [2] DOWEL  
9. 9Y-1847 [2] GUIDE-VALVE  
10. 9Y-1846 [2] GUIDE-VALVE (EXHAUST)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850134
 

4P-8361: CYLINDER HEAD GP

4P-8361 CYLINDER HEAD GP
S/N 4EK1-170
i00371652 SEBP2185
4P8361 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 [1] PLUG-PIPE  
2. 7N-1961 [8] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
3. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
5. 101-1188 [1] GASKET-CYLINDER HEAD  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4P-8362 Y [1] CYLINDER HEAD GP  
8. 6I-1357 [4] SEAL  
9. 6I-1356 [4] SEAL  
10. 9Y-0635 [2] SPACER (19.35X30.18X45-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850135
 

4P-8361: CYLINDER HEAD GP

4P-8361 CYLINDER HEAD GP
S/N 4EK171-458
i00371662 SEBP2185
4P8361 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 [1] PLUG-PIPE  
2. 7N-1961 [8] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
3. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
5. 110-6991 C [1] GASKET-CYLINDER HEAD  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4P-8362 Y [1] CYLINDER HEAD GP  
8. 6I-1357 [4] SEAL  
9. 6I-1356 [4] SEAL  
10. 9Y-0635 [2] SPACER (19.35X30.18X45-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850136
 

4P-8362: CYLINDER HEAD GP

4P-8362 CYLINDER HEAD GP
PART OF 4P-8361 CYLINDER HEAD GP
i00371668 SEBP2185
4P8362 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-8363 Y [1] CYLINDER HEAD AS  
2. 7N-1903 [4] SPRING-VALVE INNER  
3. 2W-2662 [4] SEAT-SPRING  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 4P-2521 [4] ROTOCOIL AS  
6. 2A-4429 [8] LOCK-RETAINER  
7. 104-7184 [4] VALVE  
8. 7N-1902 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850137
 

100-4325: DAMPER GP

100-4325 DAMPER GP
S/N 4EK445-UP
PART OF 125-9749, 162-7460, 7E-9483 DAMPER GP
ALSO AN ATTACHMENT
i00460213 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6I-3699 Y [1] DAMPER GP  
    -OR-
  7C-9639 Y [1] DAMPER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850138
 

125-9749: DAMPER GP

125-9749 DAMPER GP
S/N 4EK1097-2360
i00513037 SEBP2185
1259749 DAMPER GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4325 Y [1] DAMPER GP  
2. 8S-4757 [6] BOLT (1-14X8-IN)  
3. 5P-8250 [6] WASHER (28X49X5-MM THK)  
4. 1N-3482 [1] ADAPTER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850139
 

162-7460: DAMPER GP

162-7460 DAMPER GP
S/N 4EK2361-UP
Type 1
i01062025 SEBP2185
1627460 DAMPER GP Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3482 [1] ADAPTER  
2. 100-4325 Y [2] DAMPER GP  
3. 159-9591 [1] ADAPTER  
4. 162-7459 [6] BOLT (1-14X13.465-IN)  
5. 5P-8250 [6] WASHER (28X49X5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Checking Or Adjusting Valve Clearances
1986/01/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
Use Molycoat Paste Lubricant On Cylinder Head Bolts
1993/07/01
New 9U-7511 Spark Plug Seat Cleaner And 9U-7516 Spark Plug Gauge Available{1555,1100}
1994/05/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Three Piece Water Line Assembly Used Between Cylinder Head And Exhaust Manifold{1380}
1994/11/01
Additional Groove On Valve Stem Helps Identify 20° Valves {1105}
1995/04/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Spark Plug Seat Cleaner Recommended For Use On Cylinder Heads{1555}
1997/10/10
Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20
New Debris Shield Is Added To Cylinder Head Gasket Kits{1124}
1998/04/01
Use The Correct Procedure For Installation Of Cylinder Head Bolts {1100,7553}
1998/07/01
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
The New 155-1536 Valve Recession Tool Kit Has Been Released {0701,1105}
1998/11/01
New Valve Seat Inserts For Field Rework {1103}
1998/11/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Correction to Operation and Maintenance Manual, SEBU6711-04, "G3508, G3512 and G3516 Engines" {1105}
1999/12/01
A New Valve Stem Seal Is Used In The Cylinder Head Groups For All Landfill Applications: New Valve Guides Are Used In All Cylinder Head Groups: Reference Tables Identify Cylinder Head Components For G3500 Series Engines {1104}
2001/01/01
New Valve Guides Are Used {1104}
2001/05/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Cylinder Head Gasket is Used {1124}
2006/07/24
New Exhaust Valves Are Used in G3500 and G3500B Engines {1105}
2012/10/24
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2013/12/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/06/26
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3500 Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Brazil
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Hazardous Materials In Engine Combustion Chamber Deposits
Hazardous Materials In Engine Combustion Chamber Deposits
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Cylinder Head
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Systems Operation
Valve System Components
G3500 Engines
Cylinder Block, Liners and Heads
G3500 Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
G3500 Engines
Disassembly and Assembly
Cylinder Head - Remove
G3500 Engines
Cylinder Head - Disassemble
G3500 Engines
Cylinder Head - Assemble
G3500 Engines
Cylinder Head - Install
G3500 Engines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23

Caterpillar Parts SIS Catalog G3516 :

CYLINDER HEAD GP
248-5031 CYLINDER HEAD GP
CYLINDER HEAD GP
248-5030 CYLINDER HEAD GP
CYLINDER HEAD GP
247-4573 CYLINDER HEAD GP
CYLINDER HEAD GP
247-4573 CYLINDER HEAD GP
CYLINDER HEAD GP
247-4573 CYLINDER HEAD GP
CYLINDER HEAD GP
247-4572 CYLINDER HEAD GP
CYLINDER HEAD GP
247-4572 CYLINDER HEAD GP
CYLINDER HEAD GP
206-4456 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6569 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6569 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-6570 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8361 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8361 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8362 CYLINDER HEAD GP
100-4325 DAMPER GP
DAMPER GP
125-9749 DAMPER GP

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.