AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

355-0764 KIT-CYLINDER HEAD GASKET THIS GASKET KIT IS BEING RELEASED TO PROVIDE A STANDARDIZED 3500 SINGLE CYLINDER KIT FOR GAS APPLICATIONS, WITH BELLOWS EXHAUST & INTERNAL TRANSFORMERS. THIS KIT DOES NOT CONTAIN BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED FOR USE WITH @@@@@117-6698@@@@@, @@@@@126-1779@@@@@, @@@@@141-2927@@@@@, @@@@@165-6135@@@@@ FIELD INSTALLATION G3516


BASIC ENGINE
CYLINDER HEAD GP
ENGINE ARRANGEMENT
ENGINE AR

GAS ENGINE G3516 GAS ENGINE 4EK
 G3516 Engine Electronic Ignition System 4EK00001-UP SEBP2185 G3516 4EK   (1992)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
4P-8362 CYLINDER HEAD GP
355-0763 KIT-CYLINDER HEAD GASKET
355-0764 KIT-CYLINDER HEAD GASKET
 

#SEBP21850210
 

355-0764: KIT-CYLINDER HEAD GASKET

355-0764 KIT-CYLINDER HEAD GASKET
THIS GASKET KIT IS BEING RELEASED TO PROVIDE A STANDARDIZED 3500 SINGLE CYLINDER KIT FOR GAS APPLICATIONS, WITH BELLOWS EXHAUST & INTERNAL TRANSFORMERS. THIS KIT DOES NOT CONTAIN BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED
FOR USE WITH @@@@@117-6698@@@@@, @@@@@126-1779@@@@@, @@@@@141-2927@@@@@, @@@@@165-6135@@@@@
FIELD INSTALLATION
i04528584 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  133-1774 [1] COVER  
  2W-0752 [1] GASKET  
  7E-3772 [1] GASKET  
  7N-5089 [1] GASKET  
  122-8856 [1] GASKET (HOUSING, REGULATOR)  
  428-9129 [1] GASKET  
  110-6991 [1] GASKET-CYLINDER HEAD  
  153-8455 [2] GASKET-MANIFOLD  
  144-5692 [1] GASKET-PLATE  
  135-2651 [1] SEAL (PRESSURE RELIEF)  
  272-0758 [1] SEAL  
  420-0653 [4] SEAL AS-WATER  
  420-0652 [4] SEAL AS-WATER  
  179-2960 [2] SEAL-INTEGRAL  
  198-6067 [2] SEAL-INTEGRAL  
  204-9598 [2] SEAL-INTEGRAL  
  2J-0157 [2] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  5P-0840 [2] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  6V-5101 [1] SEAL-O-RING  
  6V-9769 [2] SEAL-O-RING  
  119-9443 [1] SEAL-O-RING  
  125-1372 [1] SEAL-O-RING  
  272-0757 [1] SEAL-VALVE COVER (BREATHER)  
 

#SEBP21850211
 

422-7389: KIT-ENGINE GASKET

422-7389 KIT-ENGINE GASKET
CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL AN EXTERNAL OIL PUMP
FIELD INSTALLATION
i05917447 SEBP2185
4227389 KIT-ENGINE GASKET Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-9696 [1] SEAL-O-RING  
2. 3J-1907 [1] SEAL-O-RING  
3. 259-4600 [1] SEAL-O-RING  
4. 6V-3908 [1] SEAL-O-RING  
5. 6V-5101 [1] SEAL-O-RING  
6. 7N-5057 [1] GASKET  
7. 109-2332 [2] SEAL-O-RING  
8. 111-1349 [1] GASKET  
9. 238-5080 [1] SEAL-O-RING  
10. 238-5081 [1] SEAL-O-RING  
11. 298-6387 [1] SEAL-O-RING  
 

#SEBP21850212
 

454-9087: KIT-ENGINE GASKET

454-9087 KIT-ENGINE GASKET
KIT CONTAINS GASKETS AND SEALS TO INSTALL THE AFTERCOOLER AND ATTACHING LINES
PART OF 454-9089, 454-9094 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@105-4176@@@@@, @@@@@ 4P-8329@@@@@
ALSO FIELD INSTALLATION
i06088726 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3P-6061 [2] GASKET  
  4W-9723 [1] GASKET  
  4W-9725 [2] GASKET  
  5G-1442 [2] GASKET  
  7L-4302 [2] GASKET  
  8N-0392 [1] GASKET  
  152-5705 [2] GASKET  
  9X-7529 [6] SEAL  
  3J-7354 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  5P-7701 [1] SEAL-O-RING  
  5P-8862 [4] SEAL-O-RING  
  6V-2695 [4] SEAL-O-RING  
  6V-3917 [4] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8L-2786 [3] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP21850213
 

454-9090: KIT-ENGINE GASKET

454-9090 KIT-ENGINE GASKET -FRONT COVER
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
PART OF 454-9089 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@105-4176@@@@@, @@@@@ 4P-8329@@@@@
ALSO FIELD INSTALLATION
i06089473 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-1320 [1] GASKET (ADAPTER)  
  7J-8114 [1] GASKET  
  7N-3049 [1] GASKET  
  7N-4932 [1] GASKET (ELBOW)  
  497-3911 [2] GASKET (COVER)  
  436-1478 [1] SEAL-CRANKSHAFT (CLOCKWISE ROTATION)  
  5F-9657 [4] SEAL-O-RING  
  5H-6734 [1] SEAL-O-RING  
  5P-0840 [4] SEAL-O-RING  
  5P-4892 [2] SEAL-O-RING  
  6V-3348 [8] SEAL-O-RING  
  6V-5066 [3] SEAL-O-RING  
  6V-8260 [1] SEAL-O-RING  
  9X-7371 [1] SEAL-O-RING  
  235-3546 [4] SEAL-O-RING  
  259-4598 [6] SEAL-O-RING  
  298-6387 [1] SEAL-O-RING  
  8J-6775 [4] SEAL-THREAD  
  6V-0405 [4] SEAL-BONDED  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP21850214
 

454-9091: KIT-ENGINE GASKET

454-9091 KIT-ENGINE GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FOR USE WITH @@@@@105-4176@@@@@, @@@@@ 4P-8329@@@@@
ALSO FIELD INSTALLATION
i06089932 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-3445 [1] CAP-DUST  
  2W-0752 [1] GASKET  
  6F-4868 [2] GASKET  
  7N-4945 [3] GASKET  
  9L-1480 [3] GASKET  
  230-1072 [2] GASKET  
  7E-2632 [1] GASKET-OIL PAN  
  277-5833 [2] SEAL  
  272-0758 [14] SEAL  
  272-0759 [16] SEAL  
  447-7206 [4] SEAL-O-RING  
  136-7227 [1] SEAL-O-RING  
  259-4600 [3] SEAL-O-RING  
  5P-7818 [1] SEAL-O-RING  
  5P-8210 [2] SEAL-O-RING  
  5P-8872 [1] SEAL-O-RING  
  6V-5101 [2] SEAL-O-RING  
  310-3954 [2] SEAL-O-RING  
  7X-4805 [3] SEAL-O-RING  
  8T-2928 [4] SEAL-O-RING  
  8T-2929 [4] SEAL-O-RING  
  259-4598 [1] SEAL-O-RING  
  214-7568 [6] SEAL-O-RING  
  5L-5840 [2] WASHER (9.25X16.92X1.83-MM THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP21850215
 

454-9092: KIT-ENGINE GASKET

454-9092 KIT-ENGINE GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER.. KIT DOES NOT NOT INCLUDE THE OIL PAN GASKET.
PART OF 454-9089 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@105-4176@@@@@, @@@@@ 4P-8329@@@@@
ALSO FIELD INSTALLATION
i05819138 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-1251 [1] GASKET (INTAKE MANIFOLD)  
  4H-7869 [3] GASKET  
  7N-3368 [1] GASKET  
  7N-4320 [2] GASKET  
  252-8374 [2] GASKET  
  4B-8407 [5] GASKET-COPPER  
  4W-2110 [2] RING-RETAINING  
  436-1479 [1] SEAL-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)  
  234-8937 [2] SEAL-INTEGRAL  
  136-7227 [1] SEAL-O-RING  
  6V-3348 [4] SEAL-O-RING  
  5F-9657 [2] SEAL-O-RING  
  7X-4805 [3] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP21850216
 

454-9093: KIT-ENGINE GASKET

454-9093 KIT-ENGINE GASKET -OIL COOLER, LINES
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
PART OF 454-9089, 454-9094 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@105-4176@@@@@, @@@@@ 4P-8329@@@@@
ALSO FIELD INSTALLATION
i06089796 SEBP2185
4549093 KIT-ENGINE GASKET Parts scheme 4549093 KIT-ENGINE GASKET Parts scheme 4549093 KIT-ENGINE GASKET Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1Y-7578 [1] GASKET-COVER  
2. 269-7885 [3] SEAL-O-RING  
3. 4B-8407 [1] GASKET-COPPER  
4. 4N-1320 [2] GASKET (ADAPTER)  
5. 5P-4892 [3] SEAL-O-RING  
6. 5P-5846 [1] SEAL-O-RING  
7. 6V-3908 [1] SEAL-O-RING  
9. 136-7227 [1] SEAL-O-RING  
10. 6V-5048 [6] SEAL-O-RING  
11. 6V-5066 [4] SEAL-O-RING  
12. 6V-6609 [2] SEAL-O-RING  
13. 7N-3368 [1] GASKET  
14. 7N-4945 [1] GASKET  
15. 8L-2786 [1] SEAL-O-RING  
16. 8N-1991 [1] RING-RETAINING  
17. 109-2332 [8] SEAL-O-RING  
18. 111-3820 [2] RING-RETAINING  
19. 214-7568 [1] SEAL-O-RING  
20. 228-7097 [1] SEAL-O-RING  
21. 247-3796 [2] GASKET  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP21850217
 

454-9181: KIT-ENGINE GASKET

454-9181 KIT-ENGINE GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR 8 AND 16 CYLINDER HEAD ENGINES ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
PART OF 454-9089, 454-9094 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@105-4176@@@@@, @@@@@ 4P-8329@@@@@
i06090454 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7E-3772 [1] GASKET  
  7E-4127 [1] GASKET  
  7N-5089 [1] GASKET  
  110-6991 [1] GASKET-CYLINDER HEAD  
  153-8455 [2] GASKET-MANIFOLD  
  144-5692 [1] GASKET-PLATE  
  272-0758 [1] SEAL  
  420-0652 [4] SEAL AS-WATER  
  420-0653 [4] SEAL AS-WATER  
  179-2960 [1] SEAL-INTEGRAL  
  2J-0157 [2] SEAL-O-RING  
  5P-0840 [2] SEAL-O-RING  
  5P-7204 [2] SEAL-O-RING  
  6V-5101 [1] SEAL-O-RING  
  6V-9769 [1] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  272-0757 [1] SEAL-VALVE COVER  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP21850218
 

515-4106: KIT-ENGINE GASKET

515-4106 KIT-ENGINE GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION
i06736561 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1S-5772 [1] GASKET  
  4N-1320 [1] GASKET (ADAPTER)  
  7N-4932 [1] GASKET  
  271-4926 [1] SEAL  
  5H-6734 [1] SEAL-O-RING  
  6V-1454 [2] SEAL-O-RING  
  6V-5066 [3] SEAL-O-RING  
  6V-6809 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP21850219
 

550-4025: KIT-ENGINE GASKET

550-4025 KIT-ENGINE GASKET
CENTRAL AND LOWER STRUCTURE
FOR USE WITH @@@@@112-7520@@@@@
FIELD INSTALLATION
i07692725 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-3445 [1] CAP-DUST  
  2W-0752 [2] GASKET  
  6F-4868 [2] GASKET  
  7N-3368 [1] GASKET  
  7N-4945 [3] GASKET  
  9L-1480 [3] GASKET  
  230-1072 [2] GASKET  
  7E-2632 [1] GASKET-OIL PAN  
  272-0758 [14] SEAL  
  272-0759 [16] SEAL  
  277-5833 [2] SEAL  
  5P-7818 [1] SEAL-O-RING  
  5P-8210 [2] SEAL-O-RING  
  5P-8872 [1] SEAL-O-RING  
  6V-5048 [2] SEAL-O-RING  
  6V-5101 [2] SEAL-O-RING  
  8T-2928 [4] SEAL-O-RING  
  8T-2929 [4] SEAL-O-RING  
  136-7227 [1] SEAL-O-RING  
  214-7568 [7] SEAL-O-RING  
  228-7089 [1] SEAL-O-RING  
  228-7097 [1] SEAL-O-RING  
  259-4598 [1] SEAL-O-RING  
  259-4600 [3] SEAL-O-RING  
  310-3954 [2] SEAL-O-RING  
  447-7206 [4] SEAL-O-RING  
  5L-5840 [2] WASHER (9.25X16.92X1.83-MM THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

Information:

Engine News
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Checking Or Adjusting Valve Clearances
1986/01/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
Use Molycoat Paste Lubricant On Cylinder Head Bolts
1993/07/01
New 9U-7511 Spark Plug Seat Cleaner And 9U-7516 Spark Plug Gauge Available{1555,1100}
1994/05/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Three Piece Water Line Assembly Used Between Cylinder Head And Exhaust Manifold{1380}
1994/11/01
Additional Groove On Valve Stem Helps Identify 20° Valves {1105}
1995/04/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Spark Plug Seat Cleaner Recommended For Use On Cylinder Heads{1555}
1997/10/10
Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20
New Debris Shield Is Added To Cylinder Head Gasket Kits{1124}
1998/04/01
Use The Correct Procedure For Installation Of Cylinder Head Bolts {1100,7553}
1998/07/01
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
The New 155-1536 Valve Recession Tool Kit Has Been Released {0701,1105}
1998/11/01
New Valve Seat Inserts For Field Rework {1103}
1998/11/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Correction to Operation and Maintenance Manual, SEBU6711-04, "G3508, G3512 and G3516 Engines" {1105}
1999/12/01
A New Valve Stem Seal Is Used In The Cylinder Head Groups For All Landfill Applications: New Valve Guides Are Used In All Cylinder Head Groups: Reference Tables Identify Cylinder Head Components For G3500 Series Engines {1104}
2001/01/01
New Valve Guides Are Used {1104}
2001/05/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Cylinder Head Gasket is Used {1124}
2006/07/24
New Exhaust Valves Are Used in G3500 and G3500B Engines {1105}
2012/10/24
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2013/12/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/06/26
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3500 Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Brazil
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Hazardous Materials In Engine Combustion Chamber Deposits
Hazardous Materials In Engine Combustion Chamber Deposits
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Cylinder Head
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Cylinder Head Valves
G3500 Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Systems Operation
Valve System Components
G3500 Engines
Cylinder Block, Liners and Heads
G3500 Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMANUFACTURED CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A VALVE FAILURE ON CERTAIN G3508B, G3512B, G3516, AND G3516B GAS ENGINES
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
G3500 Engines
Disassembly and Assembly
Cylinder Head - Remove
G3500 Engines
Cylinder Head - Disassemble
G3500 Engines
Cylinder Head - Assemble
G3500 Engines
Cylinder Head - Install
G3500 Engines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23

Caterpillar Parts SIS Catalog G3516 :

355-0763 KIT-CYLINDER HEAD GASKET
HUB-FLEXIBLE COUPLING
3N-5596 HUB-FLEXIBLE COUPLING
HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
4P-8307 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
4P-8307 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
4P-8307 HOUSING GP-FLYWHEEL
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
KIT-ENGINE GASKET
422-7389 KIT-ENGINE GASKET
454-9087 KIT-ENGINE GASKET
454-9090 KIT-ENGINE GASKET
454-9091 KIT-ENGINE GASKET
454-9092 KIT-ENGINE GASKET
KIT-ENGINE GASKET
454-9093 KIT-ENGINE GASKET
454-9181 KIT-ENGINE GASKET
515-4106 KIT-ENGINE GASKET

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.