AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-7584 GOVERNOR GP-ELECTRONIC G3516 GAS ENGINE


FUEL SYSTEM
GOVERNOR GP
CARBURETOR GP
REGULATOR GP-GAS PRESSURE
GOVERNOR GP
LINES GP-FUEL

GAS ENGINE G3516 GAS ENGINE 4EK
 G3516 Engine Electronic Ignition System 4EK00001-UP SEBP2185 G3516 4EK   (1992)

FUEL SYSTEM

GOVERNOR GP
166-9270 GOVERNOR GP-ELECTRONIC
9Y-6736 GOVERNOR GP-ELECTRONIC
9Y-7584 GOVERNOR GP-ELECTRONIC
236-7516 KIT-GOVERNOR SHAFT
MOUNTING GP-GOVERNOR ACTUATOR
122-9861 MOUNTING GP-GOVERNOR ACTUATOR
TUBE
173-1800 TUBE
 

#SEBP21850910
 

9Y-7584: GOVERNOR GP-ELECTRONIC

9Y-7584 GOVERNOR GP-ELECTRONIC
i00446499 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-1455 Y [1] ACTUATOR AS-GOVERNOR  
  9Y-5896 Y [1] DRIVE GP-GOVERNOR  
  7W-3355 Y [1] SENSOR GP-SPEED (ENGINE)  
  2B-0858 [1] PLUG-PIPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21850911
 

124-6325: KIT-CARBURETOR BEARING

124-6325 KIT-CARBURETOR BEARING
FOR USE WITH ALL ENGINE ARRANGEMENTS
AN ATTACHMENT
i01137784 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (KIT INCLUDES: BUSHINGS, SEALS & SLEEVES)
 

#SEBP21850912
 

133-0558: KIT-GAS VALVE

133-0558 KIT-GAS VALVE
FOR USE WITH 11:1 COMPRESSION AT 1200 RPM WITH RICH BURN
FIELD INSTALLATION
i05511529 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INCLUDES GAS VALVE, JET, SCREW & O-RING)
 

#SEBP21850913
 

236-7516: KIT-GOVERNOR SHAFT

236-7516 KIT-GOVERNOR SHAFT
STAINLESS STEEL SHAFT
FIELD INSTALLATION
i02115758 SEBP2185
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP21850914
 

170-0986: LINES GP-FUEL

170-0986 LINES GP-FUEL
Type 1
AN ATTACHMENT
i01130214 SEBP2185
1700986 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2451 [1] JOINT AS-TUBE  
  9X-7537 [2] SEAL  
2. 4W-4065 [4] SPACER (10.5X22X50.8-MM THK)  
4. 7L-3201 [2] JOINT AS-TUBE  
  8L-8585 [2] SEAL  
5. 9W-3671 [2] PLATE  
6. 105-8180 [2] GASKET  
7. 188-4008 [2] TUBE AS  
9. 170-0987 [1] TUBE AS  
10. 170-0988 [1] TUBE AS  
11. 170-0990 [2] CLAMP  
13. 1D-4706 [4] BOLT (3/8-16X6-IN)  
15. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
 

#SEBP21850915
 

170-0986: LINES GP-FUEL

170-0986 LINES GP-FUEL
Type 2
AN ATTACHMENT
i01654301 SEBP2185
1700986 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-3201 [2] JOINT AS-TUBE  
    (EACH INCLUDES)
  8L-8585 [2] SEAL  
2. 105-8180 [2] GASKET  
3. 145-9464 C [1] VALVE AS  
4. 170-0987 [1] TUBE AS  
5. 174-0028 C [2] GASKET  
6. 188-4008 [2] TUBE AS  
8. 6V-2317 CM [4] BOLT (M8X1.25X30-MM)  
9. 9M-1974 C [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP21850916
 

215-2581: LINES GP-FUEL

215-2581 LINES GP-FUEL
AN ATTACHMENT
i01682324 SEBP2185
2152581 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-0493 [4] SPACER  
2. 9W-3671 [2] PLATE  
3. 170-0988 [1] TUBE AS  
4. 170-0990 [2] CLAMP  
5. 8C-7323 [4] BOLT (3/8-16X6-IN)  
6. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
7. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
8. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

#SEBP21850917
 

328-2643: LINES GP-FUEL

328-2643 LINES GP-FUEL
PART OF 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
i03208242 SEBP2185
3282643 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5098 [2] JOINT AS-TUBE  
  3N-2730 [2] SEAL  
2. 326-7939 [2] TUBE AS  
3. 326-7940 [2] GASKET  
4. 453-5259 [1] TUBE AS  
5. 0S-1571 [24] BOLT (3/8-16X1.75-IN)  
6. 4K-0367 [4] NUT-FULL (5/8-11-THD)  
7. 5M-2894 [48] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
9. 452-2248 [1] GASKET  
10. 8T-6762 [2] PLUG-PIPE (1/2-14-THD)  
11. 9S-8752 [24] NUT-FULL (3/8-16-THD)  
12. 9X-8882 [4] BOLT (5/8-11X2.5-IN)  
 

#SEBP21850918
 

342-4492: LINES GP-FUEL

342-4492 LINES GP-FUEL
PART OF 381-0874 CONVERSION AR-ENGINE
i03715506 SEBP2185
3424492 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 301-4863 [1] ELBOW AS  
  127-4230 [2] SEAL  
2. 371-8930 [1] TUBE AS  
3. 453-5258 [1] TUBE AS  
4. 4K-0367 [4] NUT-FULL (5/8-11-THD)  
5. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
6. 452-2248 [1] GASKET  
7. 8L-9241 [1] SEAL-O-RING  
8. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
9. 9X-8882 [4] BOLT (5/8-11X2.5-IN)  
 

#SEBP21850919
 

453-5289: LINES GP-FUEL

453-5289 LINES GP-FUEL
PART OF 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
i05934004 SEBP2185
4535289 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3872 [2] SUPPORT  
2. 2L-6055 [1] CAP-PIPE  
3. 3E-2343 [1] TEE  
4. 419-6617 [1] TUBE AS  
5. 6L-7322 [1] TEE-PIPE  
6. 7X-7951 [1] ELBOW-UNION  
7. 8T-2657 [2] JOINT AS-TUBE  
    (EACH INCLUDES)
  9X-7529 [1] SEAL  
8. 419-0893 Y [1] VALVE GP-SOLENOID (24-VOLT)(GAS SHUTOFF)  
9. 210-2007 Y [1] REGULATOR GP-GAS PRESSURE  
10. 210-7769 [1] PLATE  
11. 230-8986 [1] BRACKET  
12. 237-0927 [4] WASHER-BEVEL  
13. 238-5080 [1] SEAL-O-RING  
14. 420-5122 [1] TUBE AS  
15. 265-5255 [1] PLATE  
16. 293-8396 [1] CORE AS-FUEL COOLER  
  8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
17. 330-7378 [1] TUBE AS  
18. 330-7379 [1] TUBE AS  
19. 330-7380 [1] TUBE AS  
20. 344-1950 [7] CLIP (SLOT)  
21. 424-1117 [1] BRACKET  
22. 425-3549 [2] GASKET  
23. 451-7943 [1] TUBE  
24. 452-2248 [2] GASKET  
25. 453-3532 [1] FLANGE-ADAPTER  
26. 461-6844 [1] BRACKET  
27. 044-4101 [1] COUPLING-PIPE  
28. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
29. 165-3929 [2] BOLT (3/8-16X1.5-IN)  
30. 0S-1625 [2] BOLT (5/8-11X2.5-IN)  
31. 122-8905 [1] ELBOW (90-DEG)  
32. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
33. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
35. 1B-4367 [6] BOLT (5/8-11X3-IN)  
36. 228-7090 [1] SEAL-O-RING  
37. 344-1951 [7] CLIP (TAB)  
38. 3B-1915 [8] BOLT (3/8-16X1.375-IN)  
39. 3B-7286 [2] NIPPLE-PIPE  
40. 3J-5389 [1] PLUG (EXTERNAL)  
41. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
42. 4L-9337 [8] BOLT (3/8-16X1.5-IN)  
43. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
45. 5P-6446 [3] BOLT-12 POINT HEAD (5/16-18X2-IN)  
46. 5P-8247 [32] WASHER-HARD (17X32X3.5-MM THK)  
47. 5S-0003 [3] NUT (5/16-18-THD)  
48. 6V-8188 [4] NUT (1/2-13-THD)  
49. 6V-8398 [3] SEAL-O-RING  
50. 6V-8625 [1] ELBOW  
51. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
52. 8T-2502 [4] BOLT (3/8-16X1.125-IN)  
53. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
55. 9D-6196 [8] CLIP (SLOT)  
56. 9D-6197 [8] CLIP (TAB)  
57. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
58. 9S-8752 [10] NUT-FULL (3/8-16-THD)  
59. 9X-6138 [1] PLUG-PIPE  
60. 9X-6458 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
61. 8S-9092 [8] BOLT (5/8-11X2.25-IN)  
62. 420-8789 [2] GASKET  
63. 9L-9132 [16] WASHER (10.2X25.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Service Instructions For 7C-3018 Governor Orifice {1264}
1998/11/01
Improved Woodward EG3P Actuator Assembly Is Available{1264,1265,1716}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Electronic Actuator Is Used In Gas Pressure Regulator Groups That Are On Engines That Have Air/Fuel Ratio Control Systems {1716}
2000/12/01
Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2009/07/13
A New Speed Controller and Actuator Are Available for Certain G3400 and G3500 Engines {1264, 1716, 1908}
2015/09/25
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
G3500 Engines
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Governor Drive
G3500 Engines
Actuator Linkage - Air/Fuel Ratio Control
G3500 Engines
Systems Operation
Systems Operation
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Governor
G3500 Engines
Testing and Adjusting
Testing & Adjusting
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Troubleshooting
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Caterpillar Parts SIS Catalog G3516 :

9Y-6736 GOVERNOR GP-ELECTRONIC
166-9270 GOVERNOR GP-ELECTRONIC
118-7591 GOVERNOR GP-ELECTRONIC
GOVERNOR GP-ELECTRIC
201-0861 GOVERNOR GP-ELECTRIC
GOVERNOR GP-ELECTRIC
139-4744 GOVERNOR GP-ELECTRIC
GOVERNOR GP-ELECTRIC
107-4471 GOVERNOR GP-ELECTRIC
107-4471 GOVERNOR GP-ELECTRIC
4W-5644 GOVERNOR GP
124-6325 KIT-CARBURETOR BEARING
133-0558 KIT-GAS VALVE
236-7516 KIT-GOVERNOR SHAFT
LINES GP-FUEL
170-0986 LINES GP-FUEL
LINES GP-FUEL
170-0986 LINES GP-FUEL
LINES GP-FUEL
215-2581 LINES GP-FUEL
LINES GP-FUEL
328-2643 LINES GP-FUEL
LINES GP-FUEL
342-4492 LINES GP-FUEL

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.