ELECTRICAL AND STARTING SYSTEM
IGNITION GPELECTRICAL AND STARTING SYSTEM
IGNITION GP
#SEBP21851290
141-1482: IGNITION GP-GAS ENGINE
141-1482 IGNITION GP-GAS ENGINE
S/N 4EK2375-UP
S/N 4EK2375-UP
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 4. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 5. | 4P-7483 | [2] | BRACKET | |
| 6. | 4P-7485 J | [16] | BRACKET | |
| 7. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 1S-9593 | [16] | STRAP-CABLE | ||
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 8. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 12. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 13. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 14. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 16. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 17. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 18. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 19. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 20. | 101-0383 | [1] | GUARD AS | |
| 21. | 110-9268 J | [16] | CLIP | |
| 22. | 117-6512 J | [16] | GROMMET | |
| 23. | 118-2947 | [1] | BRACKET AS | |
| 24. | 118-2950 B | [6] | GROMMET | |
| 25. | 118-3508 B | [2] | GROMMET | |
| 26. | 118-3509 B | [8] | GROMMET | |
| 27. | 119-0814 | [1] | GASKET | |
| 28. | 327-9372 CY | [16] | TRANSFORMER GP | |
| 29. | 125-3668 Y | [1] | CONTROL GP-ENGINE MONITORING | |
| 30. | 274-5912 | [1] | PLATE AS | |
| 31. | 143-9607 J | [18] | STRAP-CABLE | |
| 32. | 146-2588 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851291
141-1482: IGNITION GP-GAS ENGINE
141-1482 IGNITION GP-GAS ENGINE
S/N 4EK5302-UP
S/N 4EK5302-UP
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 4. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 5. | 4P-7483 | [2] | BRACKET | |
| 6. | 4P-7485 J | [16] | BRACKET | |
| 7. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 1S-9593 | [16] | STRAP-CABLE | ||
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 8. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 12. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 13. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 14. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 16. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 17. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 18. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 19. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 20. | 101-0383 | [1] | GUARD AS | |
| 21. | 110-9268 J | [16] | CLIP | |
| 22. | 117-6512 J | [16] | GROMMET | |
| 23. | 118-2947 | [1] | BRACKET AS | |
| 24. | 118-2950 B | [6] | GROMMET | |
| 25. | 118-3508 B | [2] | GROMMET | |
| 26. | 118-3509 B | [8] | GROMMET | |
| 27. | 119-0814 | [1] | GASKET | |
| 28. | 418-4861 CY | [16] | TRANSFORMER GP-IGNITION | |
| 29. | 125-3668 Y | [1] | CONTROL GP-ENGINE MONITORING | |
| 30. | 274-5912 | [1] | PLATE AS | |
| 31. | 143-9607 J | [18] | STRAP-CABLE | |
| 32. | 146-2588 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 301-6663 | [1] | SPARK PLUG (IGNITION) | ||
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851292
251-9459: IGNITION GP-GAS ENGINE
251-9459 IGNITION GP-GAS ENGINE
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 1
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 1
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 J | [12] | BRACKET | |
| 3. | 4P-9322 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 1S-9593 | [12] | STRAP-CABLE | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 4P-8367 | [13] | ROD-SUPPORT | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(120-CM) | |||
| 186-3736 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 J | [12] | CLIP | |
| 7. | 117-6512 J | [12] | GROMMET | |
| 8. | 118-2947 | [1] | BRACKET AS | |
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [4] | GROMMET | |
| 12. | [12] | RETAINER AS | ||
| 13. | 143-9607 J | [14] | STRAP-CABLE | |
| 14. | 194-8518 | [12] | SPARK PLUG (IGNITION) | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG (IGNITION) | ||
| 15. | 259-2078 Y | [12] | TRANSFORMER GP-IGNITION | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [16] | BOLT (3/8-16X0.625-IN) | |
| 19. | 5B-5059 | [12] | BOLT (7/16-14X5-IN) | |
| 20. | 5M-2894 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851293
251-9459: IGNITION GP-GAS ENGINE
251-9459 IGNITION GP-GAS ENGINE
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 2
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 2
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 J | [12] | BRACKET | |
| 3. | 4P-9322 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 1S-9593 | [12] | STRAP-CABLE | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 4P-8367 | [13] | ROD-SUPPORT | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(120-CM) | |||
| 186-3736 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 J | [12] | CLIP | |
| 7. | 117-6512 J | [12] | GROMMET | |
| 8. | 118-2947 | [1] | BRACKET AS | |
| 118-8411 | [1] | BRACKET | ||
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [4] | GROMMET | |
| 12. | [12] | RETAINER AS | ||
| 13. | 143-9607 J | [14] | STRAP-CABLE | |
| 14. | 194-8518 | [12] | SPARK PLUG (IGNITION) | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG (IGNITION) | ||
| 15. | 327-9371 CY | [12] | TRANSFORMER GP-CURRENT | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [16] | BOLT (3/8-16X0.625-IN) | |
| 19. | 5B-5059 | [12] | BOLT (7/16-14X5-IN) | |
| 20. | 5M-2894 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J FOR SERVICE OF ONE CYLINDER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851294
251-9459: IGNITION GP-GAS ENGINE
251-9459 IGNITION GP-GAS ENGINE
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 3
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 3
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 J | [12] | BRACKET | |
| 3. | 4P-9322 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 1S-9593 | [12] | STRAP-CABLE | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 4P-8367 | [13] | ROD-SUPPORT | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(120-CM) | |||
| 186-3736 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 J | [12] | CLIP | |
| 7. | 117-6512 J | [12] | GROMMET | |
| 8. | 118-2947 | [1] | BRACKET AS | |
| 118-8411 | [1] | BRACKET | ||
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [4] | GROMMET | |
| 12. | [12] | RETAINER AS | ||
| 13. | 143-9607 J | [14] | STRAP-CABLE | |
| 14. | 301-6663 | [12] | SPARK PLUG (IGNITION) | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 15. | 418-4862 CY | [12] | TRANSFORMER GP-IGNITION | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [16] | BOLT (3/8-16X0.625-IN) | |
| 19. | 5B-5059 | [12] | BOLT (7/16-14X5-IN) | |
| 20. | 5M-2894 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J FOR SERVICE OF ONE CYLINDER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851295
251-9459: IGNITION GP-GAS ENGINE
251-9459 IGNITION GP-GAS ENGINE
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 4
CSA APPROVED
PART OF 381-0874 CONVERSION AR-ENGINE
Type 4
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 | [12] | BRACKET | |
| 3. | 4P-9322 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 1S-9593 | [12] | STRAP-CABLE | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 4P-8367 | [13] | ROD-SUPPORT | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(120-CM) | |||
| 8T-8730 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 3E-5411 | [1] | CONNECTOR (37-PIN) | ||
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 | [12] | CLIP | |
| 7. | 117-6512 | [12] | GROMMET | |
| 8. | 118-8411 | [1] | BRACKET | |
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [4] | GROMMET | |
| 13. | 143-9607 | [14] | STRAP-CABLE | |
| 14. | 479-7702 | [12] | SPARK PLUG (IGNITION) | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 15. | 418-4862 CY | [12] | TRANSFORMER GP-IGNITION | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [16] | BOLT (3/8-16X0.625-IN) | |
| 20. | 5M-2894 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4P-7369 AFY | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851296
251-9460: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 J | [16] | BRACKET | |
| 3. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 J | [16] | CLIP | |
| 7. | 117-6512 J | [16] | GROMMET | |
| 8. | 118-2947 | [1] | BRACKET AS | |
| 118-8411 | [1] | BRACKET | ||
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [8] | GROMMET | |
| 12. | [16] | RETAINER AS | ||
| 13. | 143-9607 J | [18] | STRAP-CABLE | |
| 14. | 194-8518 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 15. | 259-2078 Y | [16] | TRANSFORMER GP-IGNITION | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 19. | 5B-5059 | [16] | BOLT (7/16-14X5-IN) | |
| 20. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851297
251-9460: IGNITION GP-GAS ENGINE
251-9460 IGNITION GP-GAS ENGINE
S/N 4EK1-5301
CSA
PART OF 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
S/N 4EK1-5301
CSA
PART OF 383-7682 CONVERSION AR-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 J | [16] | BRACKET | |
| 3. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 J | [16] | CLIP | |
| 7. | 117-6512 J | [16] | GROMMET | |
| 8. | 118-2947 | [1] | BRACKET AS | |
| 118-8411 | [1] | BRACKET | ||
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [8] | GROMMET | |
| 12. | [16] | RETAINER AS | ||
| 13. | 143-9607 J | [18] | STRAP-CABLE | |
| 14. | 194-8518 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 15. | 327-9371 CY | [16] | TRANSFORMER GP-CURRENT | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 19. | 5B-5059 | [16] | BOLT (7/16-14X5-IN) | |
| 20. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4P-7369 FJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 F | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 155-2270 F | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-6342 EF | TUBE-HEAT SHRINK (3.2-MM DIA)(10-CM) | |||
| 8T-8730 F | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J FOR SERVICE OF ONE CYLINDER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851298
251-9460: IGNITION GP-GAS ENGINE
251-9460 IGNITION GP-GAS ENGINE
S/N 4EK5302-UP
CSA
PART OF 383-7682 CONVERSION AR-ENGINE
Type 1
AN ATTACHMENT
S/N 4EK5302-UP
CSA
PART OF 383-7682 CONVERSION AR-ENGINE
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 J | [16] | BRACKET | |
| 3. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 J | [16] | CLIP | |
| 7. | 117-6512 J | [16] | GROMMET | |
| 8. | 118-2947 | [1] | BRACKET AS | |
| 118-8411 | [1] | BRACKET | ||
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [8] | GROMMET | |
| 12. | [16] | RETAINER AS | ||
| 13. | 143-9607 J | [18] | STRAP-CABLE | |
| 14. | 301-6663 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 15. | 418-4862 CY | [16] | TRANSFORMER GP-IGNITION | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 19. | 5B-5059 | [16] | BOLT (7/16-14X5-IN) | |
| 20. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4P-7369 FJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 F | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 155-2270 F | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-6342 EF | TUBE-HEAT SHRINK (3.2-MM DIA)(10-CM) | |||
| 8T-8730 F | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J FOR SERVICE OF ONE CYLINDER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851299
251-9460: IGNITION GP-GAS ENGINE
251-9460 IGNITION GP-GAS ENGINE
S/N 4EK5302-UP
CSA
PART OF 383-7682 CONVERSION AR-ENGINE
Type 2
AN ATTACHMENT
S/N 4EK5302-UP
CSA
PART OF 383-7682 CONVERSION AR-ENGINE
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7483 | [2] | BRACKET | |
| 2. | 4P-7485 J | [16] | BRACKET | |
| 3. | 4P-7487 Y | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 4. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 5. | 101-0383 | [1] | GUARD AS | |
| 6. | 110-9268 J | [16] | CLIP | |
| 7. | 117-6512 J | [16] | GROMMET | |
| 8. | 118-2947 | [1] | BRACKET AS | |
| 118-8411 | [1] | BRACKET | ||
| 9. | 118-2950 B | [6] | GROMMET | |
| 10. | 118-3508 B | [2] | GROMMET | |
| 11. | 118-3509 B | [8] | GROMMET | |
| 12. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 143-9607 J | [18] | STRAP-CABLE | |
| 14. | 301-6663 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 15. | 418-4862 Y | [16] | TRANSFORMER GP-IGNITION | |
| 16. | 119-0814 | [1] | GASKET | |
| 17. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 18. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 4P-7369 FJY | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J FOR SERVICE OF ONE CYLINDER | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
IGNITION GP
Engine News
New Bracket Available To Support Gas Engine Ignition Group Wiring Harness Assembly {1408,1550}
1996/09/23
1996/09/23
Operation and Maintenance Manual
Special Instruction
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Service Letter-NACD
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Electronic Ignition System (EIS) Electronic Control Group Software Problem
Electronic Ignition System (EIS) Electronic Control Group Software Problem
Electronic Ignition System (EIS) Electronic Control Group Software Problem
Specifications
Service Letter-China
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
Service Letter-Asia
Systems Operation
Service Letter-APD
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
Troubleshooting
Service Magazine
Caterpillar Parts SIS Catalog G3516 :
Truck sale:
59,000 USD
