ELECTRICAL AND STARTING SYSTEM
IGNITION GPCONTROL GP-ELECTRONIC
ELECTRICAL AND STARTING SYSTEM
IGNITION GP
#SEBP21851300
4P-7489: IGNITION GP-GAS ENGINE
4P-7489 IGNITION GP-GAS ENGINE
S/N 4EK1-139; 4EK141-296
S/N 4EK1-139; 4EK141-296
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 2. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 4. | 4P-7482 | [1] | PLATE | |
| 5. | 4P-7483 | [2] | BRACKET | |
| 6. | 4P-7484 | [18] | CLIP | |
| 7. | 4P-7485 J | [16] | BRACKET | |
| 8. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 9. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 10. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 11. | 0T-0102 | [22] | BOLT (3/8-16X0.625-IN) | |
| 12. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 106-4128 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 14. | 101-0383 | [1] | GUARD AS | |
| 15. | 4P-7074 Y | [16] | TRANSFORMER GP-IGNITION | |
| 16. | 3E-0257 Y | [1] | CONTROL GP-ENGINE MONITORING (ECM) | |
| 17. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 18. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 19. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 20. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 4P-7486 | [1] | GASKET | |
| 22. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 23. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| (SERVICES ONE CYLINDER) | ||||
| 110-9268 AF | [1] | CLIP | ||
| 117-6512 AF | [1] | GROMMET | ||
| 143-9607 AF | [1] | STRAP-CABLE | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851301
4P-7489: IGNITION GP-GAS ENGINE
4P-7489 IGNITION GP-GAS ENGINE
S/N 4EK140-140; 4EK297-301; 4EK307-318; 4EK320-323
S/N 4EK140-140; 4EK297-301; 4EK307-318; 4EK320-323
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 2. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 4. | 4P-7482 | [1] | PLATE | |
| 5. | 4P-7483 | [2] | BRACKET | |
| 6. | 4P-7484 | [18] | CLIP | |
| 7. | 4P-7485 J | [16] | BRACKET | |
| 8. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 9. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 10. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 11. | 0T-0102 | [22] | BOLT (3/8-16X0.625-IN) | |
| 12. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 106-4128 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 14. | 101-0383 | [1] | GUARD AS | |
| 15. | 4P-7074 Y | [16] | TRANSFORMER GP-IGNITION | |
| 16. | 111-0906 Y | [1] | CONTROL GP-ENGINE MONITORING | |
| 17. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 18. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 19. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 20. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 119-0814 | [1] | GASKET | |
| 22. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 23. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 24. | 9X-6257 | [4] | SCREW-MACHINE (6-32X0.625-IN) | |
| 25. | 5H-6555 | [4] | LOCKWASHER | |
| 26. | 110-9268 J | [16] | CLIP | |
| 27. | 0L-1351 | [16] | BOLT (3/8-16X0.875-IN) | |
| 28. | 118-2947 | [1] | BRACKET AS | |
| 29. | 117-6512 J | [16] | GROMMET | |
| 30. | 118-3509 | [6] | GROMMET | |
| 31. | 118-2950 | [6] | GROMMET | |
| 32. | 118-3508 | [4] | GROMMET | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 143-9607 AF | [1] | STRAP-CABLE | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851302
4P-7489: IGNITION GP-GAS ENGINE
4P-7489 IGNITION GP-GAS ENGINE
S/N 4EK140-140; 4EK302-306; 4EK319-319; 4EK324-446
S/N 4EK140-140; 4EK302-306; 4EK319-319; 4EK324-446
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 2. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 4. | 4P-7482 | [1] | PLATE | |
| 5. | 4P-7483 | [2] | BRACKET | |
| 6. | 4P-7484 | [18] | CLIP | |
| 7. | 4P-7485 J | [16] | BRACKET | |
| 8. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 9. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 10. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 11. | 0T-0102 | [22] | BOLT (3/8-16X0.625-IN) | |
| 12. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 121-7838 C | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 14. | 101-0383 | [1] | GUARD AS | |
| 15. | 4P-7074 Y | [16] | TRANSFORMER GP-IGNITION | |
| 16. | 122-3326 YC | [1] | CONTROL GP-ENGINE MONITORING | |
| 17. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 18. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 19. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 20. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 119-0814 | [1] | GASKET | |
| 22. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 23. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 24. | 9X-6257 | [4] | SCREW-MACHINE (6-32X0.625-IN) | |
| 25. | 5H-6555 | [4] | LOCKWASHER | |
| 26. | 110-9268 J | [16] | CLIP | |
| 27. | 0L-1351 | [16] | BOLT (3/8-16X0.875-IN) | |
| 28. | 118-2947 | [1] | BRACKET AS | |
| 29. | 117-6512 J | [16] | GROMMET | |
| 30. | 118-3509 | [6] | GROMMET | |
| 31. | 118-2950 | [6] | GROMMET | |
| 32. | 118-3508 | [4] | GROMMET | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 143-9607 AF | [1] | STRAP-CABLE | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851303
4P-7489: IGNITION GP-GAS ENGINE
4P-7489 IGNITION GP-GAS ENGINE
S/N 4EK438-UP
S/N 4EK438-UP
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 2. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 4. | 4P-7482 | [1] | PLATE | |
| 5. | 4P-7483 | [2] | BRACKET | |
| 6. | 4P-7484 | [18] | CLIP | |
| 7. | 4P-7485 J | [16] | BRACKET | |
| 8. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 9. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 10. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 11. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 12. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 124-7380 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 14. | 101-0383 | [1] | GUARD AS | |
| 15. | 4P-7074 Y | [16] | TRANSFORMER GP-IGNITION | |
| 16. | 125-3668 YC | [1] | CONTROL GP-ENGINE MONITORING | |
| 17. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 18. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 19. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 20. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 119-0814 | [1] | GASKET | |
| 22. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 23. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 24. | 9X-6257 | [4] | SCREW-MACHINE (6-32X0.625-IN) | |
| 25. | 5H-6555 | [4] | LOCKWASHER | |
| 26. | 110-9268 J | [16] | CLIP | |
| 27. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 28. | 118-2947 | [1] | BRACKET AS | |
| 29. | 117-6512 J | [16] | GROMMET | |
| 30. | 118-3509 | [8] | GROMMET | |
| 31. | 118-2950 | [6] | GROMMET | |
| 32. | 118-3508 | [2] | GROMMET | |
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 143-9607 AF | [1] | STRAP-CABLE | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851304
4P-7489: IGNITION GP-GAS ENGINE
4P-7489 IGNITION GP-GAS ENGINE
S/N 4EK457-2424
S/N 4EK457-2424
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 0T-0102 | [22] | BOLT (3/8-16X0.625-IN) | |
| 4. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 5. | 4P-7482 | [1] | PLATE | |
| 6. | 4P-7483 | [2] | BRACKET | |
| 7. | 4P-7485 J | [16] | BRACKET | |
| 8. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 186-3736 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 9. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 13. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 14. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 15. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 16. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 17. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 18. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 19. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 20. | 101-0383 | [1] | GUARD AS | |
| 21. | 110-9268 J | [16] | CLIP | |
| 22. | 117-6512 J | [16] | GROMMET | |
| 23. | 118-2947 | [1] | BRACKET AS | |
| 24. | 118-2950 B | [6] | GROMMET | |
| 25. | 118-3509 BC | [6] | GROMMET | |
| 26. | 118-3508 B | [2] | GROMMET | |
| 27. | 119-0814 | [1] | GASKET | |
| 28. | 124-0749 YC | [16] | TRANSFORMER GP-IGNITION | |
| 29. | 122-3326 Y | [1] | CONTROL GP-ENGINE MONITORING | |
| 30. | 143-9607 J | [18] | STRAP-CABLE | |
| 31. | 146-2588 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851305
4P-7489: IGNITION GP-GAS ENGINE
4P-7489 IGNITION GP-GAS ENGINE
S/N 4EK2361-UP
S/N 4EK2361-UP
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 4. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 5. | 4P-7482 | [1] | PLATE | |
| 6. | 4P-7483 | [2] | BRACKET | |
| 7. | 4P-7485 J | [16] | BRACKET | |
| 8. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 9. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 13. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 14. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 15. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 16. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 17. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 18. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 19. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 20. | 101-0383 | [1] | GUARD AS | |
| 21. | 110-9268 J | [16] | CLIP | |
| 22. | 117-6512 J | [16] | GROMMET | |
| 23. | 118-2947 | [1] | BRACKET AS | |
| 24. | 118-2950 B | [6] | GROMMET | |
| 25. | 118-3509 B | [8] | GROMMET | |
| 26. | 118-3508 B | [2] | GROMMET | |
| 27. | 119-0814 | [1] | GASKET | |
| 28. | 327-9372 CY | [16] | TRANSFORMER GP | |
| 29. | 125-3668 Y | [1] | CONTROL GP-ENGINE MONITORING | |
| 30. | 143-9607 J | [18] | STRAP-CABLE | |
| 31. | 146-2588 | [16] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 9Y-6792 | [1] | GASKET-SPARK PLUG | ||
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851306
4P-7489: IGNITION GP-GAS ENGINE
4P-7489 IGNITION GP-GAS ENGINE
S/N 4EK5302-UP
S/N 4EK5302-UP
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 0S-1614 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 0T-0102 | [20] | BOLT (3/8-16X0.625-IN) | |
| 4. | 4P-7481 | [4] | SPACER (6.6X25X21-MM THK) | |
| 5. | 4P-7482 | [1] | PLATE | |
| 6. | 4P-7483 | [2] | BRACKET | |
| 7. | 4P-7485 J | [16] | BRACKET | |
| 8. | 4P-7487 | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| 9. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6H-1717 | [4] | BOLT (1/2-13X1.125-IN) | |
| 13. | 6V-8927 | [4] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 14. | 7X-6035 | [1] | STRAP-GROUNDING | |
| 15. | 8F-8178 | [4] | BOLT (1/4-20X3.25-IN) | |
| 16. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 17. | 9X-9838 | [4] | SPACER (6.6X9.5X46.9-MM THK) | |
| 18. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 19. | 031-0243 | [1] | SCREW (1/4-20X0.625-IN) | |
| 20. | 101-0383 | [1] | GUARD AS | |
| 21. | 110-9268 J | [16] | CLIP | |
| 22. | 117-6512 J | [16] | GROMMET | |
| 23. | 118-2947 | [1] | BRACKET AS | |
| 24. | 118-2950 B | [6] | GROMMET | |
| 25. | 118-3509 B | [8] | GROMMET | |
| 26. | 118-3508 B | [2] | GROMMET | |
| 27. | 119-0814 | [1] | GASKET | |
| 28. | 418-4861 CY | [16] | TRANSFORMER GP-IGNITION | |
| 29. | 125-3668 Y | [1] | CONTROL GP-ENGINE MONITORING | |
| 30. | 143-9607 J | [18] | STRAP-CABLE | |
| 31. | 146-2588 | [16] | SPARK PLUG (UPPER) | |
| (EACH INCLUDES) | ||||
| 301-6663 | [1] | SPARK PLUG (IGNITION) | ||
| 4P-7369 AFJ | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| 117-1254 AF | [1] | HARNESS AS-WIRING (IGNITION, REPAIR) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | HARNESS ASSEMBLY MARKED J INCLUDES PARTS MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851307
426-5362: INSTALLATION GP-COMMUNICATION
426-5362 INSTALLATION GP-COMMUNICATION -PLE601 NETWORK MANAGER
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 360-4226 Y | [1] | HARNESS AS-CONTROL | ||
| 7X-2534 M | [4] | BOLT (M6X1X50-MM) | ||
| 417-4722 | [1] | CONTROL GP-COMMUNICATION (NETWORK MANAGER) | ||
| 8C-5607 | [8] | MOUNT-ISOLATION | ||
| 344-5673 M | [4] | NUT (M6X1-THD) | ||
| 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | ||
| 7K-1181 | [15] | STRAP-CABLE | ||
| 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851308
426-5363: INSTALLATION GP-COMMUNICATION
426-5363 INSTALLATION GP-COMMUNICATION -PL641 CELLULAR
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 423-7018 Y | [1] | HARNESS AS-WIRING (PRODUCT LINK RADIO) | ||
| 440-2105 CY | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK ELITE 641 CELLULAR) | ||
| 8T-4971 M | [4] | BOLT (M6X1X30-MM) | ||
| 433-9722 | [1] | FILM-IDENTIFICATION (WIRELESS COM DEVICE, READ OMM) | ||
| 433-9728 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, U.S.) | ||
| 433-9730 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, INTL) | ||
| 344-5673 M | [4] | NUT (M6X1-THD) | ||
| 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21851309
464-6132: INSTALLATION GP-COMMUNICATION
464-6132 INSTALLATION GP-COMMUNICATION
PLE601-A5N2 GAS RETROFIT KIT
FIELD INSTALLATION
PLE601-A5N2 GAS RETROFIT KIT
FIELD INSTALLATION
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 459-0786 Y | [1] | CONTROL GP-COMMUNICATION (NETWORK MANAGER) | ||
| 423-0848 Y | [1] | HARNESS AS-CONTROL (POWER) | ||
| 7X-2534 M | [4] | BOLT (M6X1X50-MM) | ||
| 8C-5607 | [8] | MOUNT-ISOLATION | ||
| 344-5673 M | [4] | NUT (M6X1-THD) | ||
| 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | ||
| 7K-1181 | [15] | STRAP-CABLE | ||
| 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
IGNITION GP
Engine News
New Bracket Available To Support Gas Engine Ignition Group Wiring Harness Assembly {1408,1550}
1996/09/23
1996/09/23
Operation and Maintenance Manual
Special Instruction
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Service Letter-NACD
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Electronic Ignition System (EIS) Electronic Control Group Software Problem
Electronic Ignition System (EIS) Electronic Control Group Software Problem
Electronic Ignition System (EIS) Electronic Control Group Software Problem
Specifications
Service Letter-China
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
Service Letter-Asia
Systems Operation
Service Letter-APD
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
Troubleshooting
Service Magazine
Caterpillar Parts SIS Catalog G3516 :
Truck sale:
59,000 USD
