3406E Truck Engine 5EK00001-01820 BASIC ENGINE Caterpillar SIS

TRUCK ENGINE 3406E TRUCK ENGINE 5EK
3406E Truck Engine 5EK00001-01820 SEBP2186 3406E 5EK (1993)

Parts group 3406E:

For full view, you need register

BASIC ENGINE

ADAPTER GP-ENGINE TO XMSN

133-1860 ADAPTER GP-ENGINE TO XMSN

133-1860 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH ALLISON HD TRANSMISSION
AN ATTACHMENT

110-8228 FASTENER GP-XMSN ADAPTER

110-8228 FASTENER GP-XMSN ADAPTER
FOR USE WITH @@@@@107-5651@@@@@, @@@@@141-2137@@@@@
AN ATTACHMENT

AIR COMPRESSOR GP

102-9551 AIR COMPRESSOR GP

102-9551 AIR COMPRESSOR GP
PART OF 129-1222, 6I-3909 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

102-9553 AIR COMPRESSOR GP

102-9553 AIR COMPRESSOR GP
PART OF 6I-3906 AIR COMPRESSOR GP
AN ATTACHMENT

102-9554 AIR COMPRESSOR GP

102-9554 AIR COMPRESSOR GP
PART OF 6I-3894 AIR COMPRESSOR GP
AN ATTACHMENT

107-8086 AIR COMPRESSOR GP

107-8086 AIR COMPRESSOR GP
DRIVE RATIO 1.0:1.2. 13 CFM
FOR USE WITH 550 AIR COMPRESSOR WITH AIR LINES
ALSO AN ATTACHMENT

107-8087 AIR COMPRESSOR GP

107-8087 AIR COMPRESSOR GP
16CFM. 750 COMPRESSOR WITH AIR LINES DRIVE RATIO 1.2 TO 1
AN ATTACHMENT

108-3355 AIR COMPRESSOR GP

108-3355 AIR COMPRESSOR GP
AN ATTACHMENT

113-4698 AIR COMPRESSOR GP

113-4698 AIR COMPRESSOR GP
31 CFM. 4 CYLINDER, GEAR DRIVEN
AN ATTACHMENT

115-2360 AIR COMPRESSOR GP

115-2360 AIR COMPRESSOR GP
PART OF 6I-3894 AIR COMPRESSOR GP
AN ATTACHMENT

117-4018 AIR COMPRESSOR GP

117-4018 AIR COMPRESSOR GP
PART OF 117-5025 AIR COMPRESSOR GP
AN ATTACHMENT

117-4019 AIR COMPRESSOR GP

117-4019 AIR COMPRESSOR GP
PART OF 117-5027 AIR COMPRESSOR GP
AN ATTACHMENT

117-5025 AIR COMPRESSOR GP

117-5025 AIR COMPRESSOR GP
PART OF 117-5026 AIR COMPRESSOR GP
AN ATTACHMENT

117-5026 AIR COMPRESSOR GP

117-5026 AIR COMPRESSOR GP
DRIVE RATIO 1.0:1.2. 13 CFM
AN ATTACHMENT

117-5027 AIR COMPRESSOR GP

117-5027 AIR COMPRESSOR GP
PART OF 117-5028 AIR COMPRESSOR GP
AN ATTACHMENT

117-5028 AIR COMPRESSOR GP

117-5028 AIR COMPRESSOR GP
DRIVE RATIO 1.0:1.2. 16 CFM
AN ATTACHMENT

125-2708 AIR COMPRESSOR GP

125-2708 AIR COMPRESSOR GP
DRIVE RATIO 1.0:1.2. 13 CFM
AN ATTACHMENT

128-1695 AIR COMPRESSOR GP

128-1695 AIR COMPRESSOR GP
31 CFM, GEAR DRIVEN DRIVE RATIO 1.2:1
Type 1
FOR USE WITH @@@@@137-0272@@@@@
AN ATTACHMENT

128-1695 AIR COMPRESSOR GP

128-1695 AIR COMPRESSOR GP
31 CFM, GEAR DRIVEN DRIVE RATIO 1.2:1
Type 2
FOR USE WITH @@@@@137-0272@@@@@
AN ATTACHMENT

129-1222 AIR COMPRESSOR GP

129-1222 AIR COMPRESSOR GP
PART OF 125-2708 AIR COMPRESSOR GP
Type 1
AN ATTACHMENT

129-1222 AIR COMPRESSOR GP

129-1222 AIR COMPRESSOR GP
PART OF 125-2708 AIR COMPRESSOR GP
Type 2
AN ATTACHMENT

131-6679 AIR COMPRESSOR GP

131-6679 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 129-1222 AIR COMPRESSOR GP
AN ATTACHMENT

6I-3894 AIR COMPRESSOR GP

6I-3894 AIR COMPRESSOR GP
PART OF 108-3355, 113-4698, 6I-3914 AIR COMPRESSOR GP
Type 1
AN ATTACHMENT

6I-3894 AIR COMPRESSOR GP

6I-3894 AIR COMPRESSOR GP
PART OF 108-3355, 113-4698, 128-1695, 6I-3914 AIR COMPRESSOR GP
Type 2
AN ATTACHMENT

6I-3905 AIR COMPRESSOR GP

6I-3905 AIR COMPRESSOR GP

6I-3906 AIR COMPRESSOR GP

6I-3906 AIR COMPRESSOR GP
PART OF 107-8087, 6I-3908 AIR COMPRESSOR GP
AN ATTACHMENT

6I-3908 AIR COMPRESSOR GP

6I-3908 AIR COMPRESSOR GP
AN ATTACHMENT

6I-3909 AIR COMPRESSOR GP

6I-3909 AIR COMPRESSOR GP
PART OF 107-8086, 6I-3905 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

6I-3914 AIR COMPRESSOR GP

6I-3914 AIR COMPRESSOR GP
AN ATTACHMENT

115-2963 COVER GP-AIR COMPRESSOR

115-2963 COVER GP-AIR COMPRESSOR
AN ATTACHMENT

128-6036 COVER GP-AIR COMPRESSOR

128-6036 COVER GP-AIR COMPRESSOR
FOR USE WITH ENGINES NOT EQUIPPED WITH AIR COMPRESSOR
AN ATTACHMENT

6I-3911 LINES GP-AIR COMPRESSOR

6I-3911 LINES GP-AIR COMPRESSOR
S/N 5EK1-361
ALSO AN ATTACHMENT

6I-3911 LINES GP-AIR COMPRESSOR

6I-3911 LINES GP-AIR COMPRESSOR
S/N 5EK362-1820
ALSO AN ATTACHMENT

6I-3922 LINES GP-AIR COMPRESSOR

6I-3922 LINES GP-AIR COMPRESSOR
AN ATTACHMENT

114-2556 SUPPORT GP-AIR COMPR LINES

114-2556 SUPPORT GP-AIR COMPR LINES
AN ATTACHMENT

6I-3926 SUPPORT GP-AIR COMPR LINES

6I-3926 SUPPORT GP-AIR COMPR LINES
AIR COMPRESSOR
AN ATTACHMENT

BELT TIGHTENER GP

101-3085 BELT TIGHTENER GP

101-3085 BELT TIGHTENER GP
VEE GROOVE PULLEY (2 PULLEY GROOVES FOR 1/2 INCH AND 11/16 INCH BELTS)
FOR USE WITH ALTERNATOR MOUNTING
AN ATTACHMENT

108-4515 BELT TIGHTENER GP

108-4515 BELT TIGHTENER GP
VEE GROOVE PULLEY (2 GROOVES FOR 1/2 INCH BELT)
FOR USE WITH ALTERNATOR MOUNTING
AN ATTACHMENT

126-8550 BELT TIGHTENER GP

126-8550 BELT TIGHTENER GP
CANNOT BE USED WITH ALTERNATOR MOUNTING
AN ATTACHMENT

131-2621 BELT TIGHTENER GP

131-2621 BELT TIGHTENER GP
FOR USE WITH ALTERNATOR MOUNTING
AN ATTACHMENT

101-3086 FASTENER GP-BELT TIGHTENER

101-3086 FASTENER GP-BELT TIGHTENER
PROVIDES MOUNTING BRACKET TO ATTACH BELT TIGHTENER TO ENGINE
ALSO AN ATTACHMENT

9Y-3650 FASTENER GP-BELT TIGHTENER

9Y-3650 FASTENER GP-BELT TIGHTENER
AN ATTACHMENT

ENGINE BRAKE GP

9N-1852 BRAKESAVER GP

9N-1852 BRAKESAVER GP

9N-1852 BRAKESAVER GP

9N-1852 BRAKESAVER GP
ALSO AN ATTACHMENT

9N-0572 CONTROL GP-BRAKESAVER

9N-0572 CONTROL GP-BRAKESAVER
AUTOMATIC
AN ATTACHMENT

116-0691 ENGINE BRAKE GP

116-0691 ENGINE BRAKE GP
AN ATTACHMENT

122-9240 ENGINE BRAKE GP

122-9240 ENGINE BRAKE GP
PACBRAKE
FIELD INSTALLATION

130-3287 ENGINE BRAKE GP

130-3287 ENGINE BRAKE GP
JAKE BRAKE
AN ATTACHMENT

6I-1481 ENGINE BRAKE GP

6I-1481 ENGINE BRAKE GP
PROVIDES ENGINE RETARDER JAKE BRAKE MODEL 340
ALSO AN ATTACHMENT

9N-2059 FASTENER GP-BRAKESAVER

9N-2059 FASTENER GP-BRAKESAVER

141-8389 HOUSING GP-ENGINE BRAKE

141-8389 HOUSING GP-ENGINE BRAKE
PART OF 6I-1481 ENGINE BRAKE GP
ALSO AN ATTACHMENT

144-2996 HOUSING GP-ENGINE BRAKE

144-2996 HOUSING GP-ENGINE BRAKE
PART OF 130-3287 ENGINE BRAKE GP
AN ATTACHMENT

1S-3998 VALVE AS-RETARDER

1S-3998 VALVE AS-RETARDER
PART OF 9N-0572 CONTROL GP-BRAKESAVER
AN ATTACHMENT

9N-3687 VALVE GP-BRAKESAVER CONTROL

9N-3687 VALVE GP-BRAKESAVER CONTROL
ALSO AN ATTACHMENT

9Y-7116 VALVE GP-BRAKESAVER CONTROL

9Y-7116 VALVE GP-BRAKESAVER CONTROL
PART OF 9N-3687 VALVE GP-BRAKESAVER CONTROL
ALSO AN ATTACHMENT

5D-3056 VALVE GP-CHECK

5D-3056 VALVE GP-CHECK
PART OF 9N-0572 CONTROL GP-BRAKESAVER
AN ATTACHMENT

CAMSHAFT GP

108-5901 CAMSHAFT GP

108-5901 CAMSHAFT GP

6I-1543 CAMSHAFT GP

6I-1543 CAMSHAFT GP

102-2271 COVER GP-CAMSHAFT

102-2271 COVER GP-CAMSHAFT
FOR USE WITH FRONT SOUND COVERS
ALSO AN ATTACHMENT

110-0046 COVER GP-CAMSHAFT

110-0046 COVER GP-CAMSHAFT
PROVIDES ADDITIONAL CLEARANCE FOR FAN DRIVE MOUNTING BRACKET
FOR USE WITH FRONT SOUND COVER
AN ATTACHMENT

COMPRESSOR GP-REFRIGERANT

108-4513 MOUNTING GP-ALTERNATOR & COMPR

108-4513 MOUNTING GP-ALTERNATOR & COMPR
AN ATTACHMENT

108-4514 MOUNTING GP-ALTERNATOR & COMPR

108-4514 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH @@@@@108-4515@@@@@, PISTON FREON COMPRESSOR, BELT TIGHTENER OR BELT TIGHTENER FASTENER
ALSO AN ATTACHMENT

108-4523 MOUNTING GP-ALTERNATOR & COMPR

108-4523 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH @@@@@108-4515@@@@@, ROTARY FREON COMPRESSOR AND BELT TIGHTENER,
AN ATTACHMENT

108-9368 MOUNTING GP-ALTERNATOR & COMPR

108-9368 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH @@@@@108-9367@@@@@, @@@@@109-1102@@@@@, PISTON FREON COMPRESSOR
AN ATTACHMENT

108-9369 MOUNTING GP-ALTERNATOR & COMPR

108-9369 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH @@@@@108-4515@@@@@, @@@@@108-9367@@@@@, PISTON FREON COMPRESSOR, BELT TIGHTENER
AN ATTACHMENT

110-8877 MOUNTING GP-ALTERNATOR & COMPR

110-8877 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH @@@@@108-4515@@@@@, @@@@@108-9367@@@@@, ROTARY FREON COMPRESSOR
ALSO AN ATTACHMENT

129-5162 MOUNTING GP-ALTERNATOR & COMPR

129-5162 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH PISTON FREON COMPRESSOR
AN ATTACHMENT

4W-4836 MOUNTING GP-ALTERNATOR & COMPR

4W-4836 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH ROTARY TYPE REFRIGERANT COMPRESSOR
AN ATTACHMENT

6I-3955 MOUNTING GP-ALTERNATOR & COMPR

6I-3955 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH PISTON TYPE REFRIGERANT COMPRESSOR
AN ATTACHMENT

6I-3956 MOUNTING GP-ALTERNATOR & COMPR

6I-3956 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH PISTON TYPE FREON COMPRESSOR
CANNOT BE USED WITH OFFSET FAN DRIVE
ALSO AN ATTACHMENT

CRANKSHAFT GP

6I-1001 CRANKSHAFT GP

6I-1001 CRANKSHAFT GP

243-6718 KIT-CRANKSHAFT BEARING

243-6718 KIT-CRANKSHAFT BEARING
FIELD INSTALLATION

319-0785 SEAL GP-CRANKSHAFT

319-0785 SEAL GP-CRANKSHAFT -REAR
PART OF 109-4312, 109-4313 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
ALSO AN ATTACHMENT

CYLINDER BLOCK GP

107-6736 COVER GP-CYLINDER BLOCK

107-6736 COVER GP-CYLINDER BLOCK
FOR USE WITH MID MOUNTED TURBO AND/OR RH OIL FILL
ALSO AN ATTACHMENT

107-6737 COVER GP-CYLINDER BLOCK

107-6737 COVER GP-CYLINDER BLOCK
ALSO AN ATTACHMENT

109-1223 COVER GP-CYLINDER BLOCK

109-1223 COVER GP-CYLINDER BLOCK
FOR USE WITH LOW OR CENTER MOUNTED TURBOCHARGER
ALSO AN ATTACHMENT

109-7423 COVER GP-CYLINDER BLOCK

109-7423 COVER GP-CYLINDER BLOCK
FOR USE WITH RH SERVICE ENGINES
CANNOT BE USED WITH BLOCK MOUNTED BREATHERS
AN ATTACHMENT

4P-5404 COVER GP-CYLINDER BLOCK

4P-5404 COVER GP-CYLINDER BLOCK

108-3919 CYLINDER BLOCK AS

108-3919 CYLINDER BLOCK AS
PART OF 107-2232, 112-9058 CYLINDER BLOCK GP

125-0835 CYLINDER BLOCK AS

125-0835 CYLINDER BLOCK AS
PART OF 125-0512 CYLINDER BLOCK GP

107-2232 CYLINDER BLOCK GP

107-2232 CYLINDER BLOCK GP
S/N 5EK1-1367
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

107-2232 CYLINDER BLOCK GP

107-2232 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

108-2111 CYLINDER BLOCK GP

108-2111 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 4P-5401@@@@@, @@@@@107-2232@@@@@
FIELD INSTALLATION

112-9058 CYLINDER BLOCK GP

112-9058 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@125-0512@@@@@

125-0512 CYLINDER BLOCK GP

125-0512 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@107-2232@@@@@, @@@@@112-9058@@@@@
FIELD INSTALLATION

4P-5401 CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP
Type 1
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

4P-5401 CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP
Type 2
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

4P-5401 CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP
S/N 5EK1647-1820
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

0R-8913 CYLINDER PACK GP

0R-8913 CYLINDER PACK GP
PART OF 348-7339, 356-6807, 356-6810 PARTS GP-ENGINE OVERHAUL

109-1222 PLUG GP-CYLINDER BLOCK

109-1222 PLUG GP-CYLINDER BLOCK
FOR USE WITH OIL LEVEL GAUGE GUIDE LOCATIONS THAT ARE NOT USED
AN ATTACHMENT

CYLINDER HEAD GP

161-6190 CYLINDER HEAD AS

161-6190 CYLINDER HEAD AS
PART OF 161-6191 CYLINDER HEAD GP

161-6191 CYLINDER HEAD GP

161-6191 CYLINDER HEAD GP
PART OF 4P-5050 CYLINDER HEAD GP

4P-5050 CYLINDER HEAD GP

4P-5050 CYLINDER HEAD GP

110-1116 PLUG GP-CYLINDER HEAD

110-1116 PLUG GP-CYLINDER HEAD
CANNOT BE USED WITH SET BACK REGULATOR HOUSING
ALSO AN ATTACHMENT

115-2324 SLEEVE GP-INJECTOR

115-2324 SLEEVE GP-INJECTOR
PART OF 161-6190 CYLINDER HEAD AS

DAMPER GP

104-6725 DAMPER & PULLEY GP

104-6725 DAMPER & PULLEY GP
AN ATTACHMENT

4P-4291 DAMPER & PULLEY GP

4P-4291 DAMPER & PULLEY GP
S/N 5EK1-1743
7.5 INCH DIAMETER
ALSO AN ATTACHMENT

4P-4292 DAMPER & PULLEY GP

4P-4292 DAMPER & PULLEY GP
8.5 IN DIA PULLEY

4P-4293 DAMPER & PULLEY GP

4P-4293 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT

4P-4295 DAMPER & PULLEY GP

4P-4295 DAMPER & PULLEY GP
8.5 INCH DIAMETER
AN ATTACHMENT

4P-4296 DAMPER & PULLEY GP

4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT

4P-7491 DAMPER & PULLEY GP

4P-7491 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT

9Y-8712 DAMPER & PULLEY GP

9Y-8712 DAMPER & PULLEY GP

111-8316 DAMPER GP

111-8316 DAMPER GP
CANNOT BE USED WITH AUTOMATIC TRANSMISSION
ALSO AN ATTACHMENT

111-8317 DAMPER GP

111-8317 DAMPER GP
2-GROOVE. VISCOUS
FOR USE WITH ENGINES RATED 435 BHP AND ABOVE AND ENGINES EQUIPPED WITH AUTO TRANSMISSION OR FRONT PTO, AUTOMATIC TRANSMISSIONS OR FRONT PTO
ALSO AN ATTACHMENT

113-7354 DAMPER GP

113-7354 DAMPER GP
FOR USE WITH AUTOMATIC TRANSMISSION
AN ATTACHMENT

140-9503 DAMPER GP

140-9503 DAMPER GP
VISCOUS
FOR USE WITH 7.5 IN(190.5MM) DIAMETER, 8 GROOVE POLY VEE PULLEY
AN ATTACHMENT

DRIVE GP-AUXILIARY

100-4310 ADAPTER GP-AUXILIARY DRIVE

100-4310 ADAPTER GP-AUXILIARY DRIVE
PART OF 6I-3638 DRIVE GP-PUMP

DRIVE GP-FAN

108-9365 DRIVE GP-FAN

108-9365 DRIVE GP-FAN
2 FRONT GROOVES FOR 1/2 INCH BELT-2 REAR GROOVES FOR 11/16 INCH BELT, FAN ADAPTER 2 INCH DIAMETER PILOT WITH 3.5 INCH BOLT CIRCLE AND .22 INCH PILOT
AN ATTACHMENT

108-9366 DRIVE GP-FAN

108-9366 DRIVE GP-FAN
FAN ADAPTER HAS 2 INCH DIAMETER X 1.14 INCH LONG PILOT AND 3.5 INCH BOLT CIRCLE, 2 FRONT GROOVES FOR 1/2 INCH BELT 2 REAR GROOVES FOR 11/16 INCH BELT
AN ATTACHMENT

108-9367 DRIVE GP-FAN

108-9367 DRIVE GP-FAN
FAN ADAPTER HAS 2 INCH DIAMETER X 1.14 INCH LONG PILOT AND 3.5 INCH BOLT CIRCLE, 2 FRONT GROOVES FOR 1/2 INCH BELT 2 REAR GROOVES FOR 11/16 INCH BELT
FOR USE WITH ALTERNATOR MOUNTING
AN ATTACHMENT

109-1102 DRIVE GP-FAN

109-1102 DRIVE GP-FAN
FAN ADAPTER HAS 2 INCH DIAMETER X .22 INCH LONG EXTERNAL PILOT AND 3.5 INCH BOLT CIRCLE, 2 FRONT GROOVES FOR 1/2 INCH BELT 2 REAR GROOVES FOR 11/16 INCH BELT
FOR USE WITH ALTERNATOR MOUNTING, VISCOUS FAN DRIVE
AN ATTACHMENT

102-2265 FASTENER GP-FAN DRIVE

102-2265 FASTENER GP-FAN DRIVE
PROVIDES 7 INCH THREAD LENGTH ADJUSTING BOLT
ALSO AN ATTACHMENT

103-4703 FASTENER GP-FAN DRIVE

103-4703 FASTENER GP-FAN DRIVE
AN ATTACHMENT

113-4386 FASTENER GP-FAN DRIVE

113-4386 FASTENER GP-FAN DRIVE
PROVIDES ADDITIONAL FAN DRIVE MOUNTING STUD
AN ATTACHMENT

6I-4658 FASTENER GP-FAN DRIVE

6I-4658 FASTENER GP-FAN DRIVE
PROVIDES FAN DRIVE MOUNTING STUDS
AN ATTACHMENT

7W-9005 FASTENER GP-FAN DRIVE

7W-9005 FASTENER GP-FAN DRIVE
AN ATTACHMENT

DRIVE GP-PUMP

103-4671 COVER GP-HYDRAULIC PUMP DRIVE

103-4671 COVER GP-HYDRAULIC PUMP DRIVE
ALSO AN ATTACHMENT

6I-3638 DRIVE GP-PUMP

6I-3638 DRIVE GP-PUMP
SAE 2

FLYWHEEL GP

133-1860 ADAPTER GP-ENGINE TO XMSN

133-1860 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH ALLISON HD TRANSMISSION
AN ATTACHMENT

107-5651 ADAPTER GP-FLYWHEEL

107-5651 ADAPTER GP-FLYWHEEL
FOR USE WITH @@@@@110-8228@@@@@
AN ATTACHMENT

141-2137 ADAPTER GP-FLYWHEEL

141-2137 ADAPTER GP-FLYWHEEL
FOR USE WITH @@@@@110-8228@@@@@
AN ATTACHMENT

6N-9829 ADAPTER GP-FLYWHEEL

6N-9829 ADAPTER GP-FLYWHEEL
CANNOT BE USED WITH BRAKESAVER ENGINE
AN ATTACHMENT

110-8228 FASTENER GP-XMSN ADAPTER

110-8228 FASTENER GP-XMSN ADAPTER
FOR USE WITH @@@@@107-5651@@@@@, @@@@@141-2137@@@@@
AN ATTACHMENT

107-3825 FLYWHEEL GP

107-3825 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, 14 INCH, 2 PLATE CLUTCH
AN ATTACHMENT

107-3847 FLYWHEEL GP

107-3847 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, 15.5-INCH CLUTCH
ALSO AN ATTACHMENT

107-3848 FLYWHEEL GP

107-3848 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, 17 INCH DIAPHRAGM SPRING CLUTCH
ALSO AN ATTACHMENT

113-7059 FLYWHEEL GP

113-7059 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, TORQUE CONVERTER WITHOUT CLUTCH
AN ATTACHMENT

113-7060 FLYWHEEL GP

113-7060 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT

114-1927 FLYWHEEL GP

114-1927 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING , 15.5-INCH, 7 SPRING CLUTCH
ALSO AN ATTACHMENT

114-1928 FLYWHEEL GP

114-1928 FLYWHEEL GP
FOR USE WITH SAE NO. 1 OR 16 INCH FLYWHEEL HOUSING AND 15.5 INCH, 7 SPRING CLUTCH, BRAKESAVER
AN ATTACHMENT

114-1931 FLYWHEEL GP

114-1931 FLYWHEEL GP
15.5 INCH
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, BRAKESAVER
ALSO AN ATTACHMENT

4P-3740 FLYWHEEL GP

4P-3740 FLYWHEEL GP
FOR USE WITH SPICER 15.5 INCH, 7 SPRING CLUTCH
AN ATTACHMENT

4P-4795 FLYWHEEL GP

4P-4795 FLYWHEEL GP
REQUIRES BRAKESAVER
FOR USE WITH SPICER 15.5 INCH, 7 SPRING CLUTCH
AN ATTACHMENT

4P-8170 FLYWHEEL GP

4P-8170 FLYWHEEL GP
FOR USE WITH 17 INCH SINGLE-PLATE DIAPHRAGM SPRING CLUTCH
AN ATTACHMENT

4W-7370 FLYWHEEL GP

4W-7370 FLYWHEEL GP
FOR USE WITH A SPICER 10 SPRING DAMPENED DISK CLUTCH
CANNOT BE USED WITH BRAKESAVER ENGINES
AN ATTACHMENT

6N-1299 FLYWHEEL GP

6N-1299 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING AND BRAKESAVER ENGINES
AN ATTACHMENT

9N-0018 FLYWHEEL GP

9N-0018 FLYWHEEL GP
FOR USE WITH 14 INCH TWO PLATE CLUTCH & SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT

9N-0676 FLYWHEEL GP

9N-0676 FLYWHEEL GP
FOR USE WITH 15.5 INCH TWO PLATE CLUTCH & SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT

9N-0678 FLYWHEEL GP

9N-0678 FLYWHEEL GP
S/N 5EK1-1819
FOR USE WITH 14 INCH CLUTCH
ALSO AN ATTACHMENT

GEAR GP

102-8397 GEAR GP-FRONT

102-8397 GEAR GP-FRONT

102-2270 HOUSING GP-FRONT

102-2270 HOUSING GP-FRONT
NO SOUND SUPPRESSION
CANNOT BE USED WITH OIL FILL, BELT TIGHTENER, ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

102-2272 HOUSING GP-FRONT

102-2272 HOUSING GP-FRONT
S/N 5EK1-1743
SOUND SUPPRESSION
CANNOT BE USED WITH OIL FILL, BELT TIGHTENER, ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

108-4160 HOUSING GP-FRONT

108-4160 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH OIL FILL, BELT TIGHTENER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4161 HOUSING GP-FRONT

108-4161 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH BELT TIGHTENER, ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

108-4162 HOUSING GP-FRONT

108-4162 HOUSING GP-FRONT
FOR USE WITH FRONT OIL FILL
AN ATTACHMENT

108-4164 HOUSING GP-FRONT

108-4164 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH OIL FILLER
AN ATTACHMENT

108-4183 HOUSING GP-FRONT

108-4183 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH OIL FILLER, BELT TIGHTENER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4185 HOUSING GP-FRONT

108-4185 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH BELT TIGHTENER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4517 HOUSING GP-FRONT

108-4517 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH OIL FILLER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4518 HOUSING GP-FRONT

108-4518 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH CAM COVER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4519 HOUSING GP-FRONT

108-4519 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH OIL FILLER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4520 HOUSING GP-FRONT

108-4520 HOUSING GP-FRONT
SOUND SUPPRESSION
ALSO AN ATTACHMENT

HOUSING GP-FLYWHEEL

133-1860 ADAPTER GP-ENGINE TO XMSN

133-1860 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH ALLISON HD TRANSMISSION
AN ATTACHMENT

9N-3889 COVER GP-FLYWHEEL HOUSING

9N-3889 COVER GP-FLYWHEEL HOUSING
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING

110-8228 FASTENER GP-XMSN ADAPTER

110-8228 FASTENER GP-XMSN ADAPTER
FOR USE WITH @@@@@107-5651@@@@@, @@@@@141-2137@@@@@
AN ATTACHMENT

103-4701 HOUSING GP-FLYWHEEL

103-4701 HOUSING GP-FLYWHEEL
AN ATTACHMENT

109-4311 HOUSING GP-FLYWHEEL

109-4311 HOUSING GP-FLYWHEEL
S/N 5EK1385-1820
SAE #1, 11.5 DEGREE TO LEFT INSTALLATION ANGLE
CANNOT BE USED WITH BRAKESAVER
ALSO AN ATTACHMENT

109-4312 HOUSING GP-FLYWHEEL

109-4312 HOUSING GP-FLYWHEEL
SAE #1. VERTICAL INSTALLATION
ALSO AN ATTACHMENT

109-4313 HOUSING GP-FLYWHEEL

109-4313 HOUSING GP-FLYWHEEL
SAE #1. 7.5 DERGEE ROLL TO THE LEFT OR VERTICAL INSTALLATION
CANNOT BE USED WITH BRAKESAVER
AN ATTACHMENT

116-0696 HOUSING GP-FLYWHEEL

116-0696 HOUSING GP-FLYWHEEL
AN ATTACHMENT

116-4897 HOUSING GP-FLYWHEEL

116-4897 HOUSING GP-FLYWHEEL
INSTALLATION ANGLE OF 11.5 DEGREE
AN ATTACHMENT

126-4950 HOUSING GP-FLYWHEEL

126-4950 HOUSING GP-FLYWHEEL
SAE #1. VERTICAL INSTALLATION, STARTER MOUNTING BOLTS ROTATED 15 DEGREES CLOCKWISE
AN ATTACHMENT

130-3788 HOUSING GP-FLYWHEEL

130-3788 HOUSING GP-FLYWHEEL
AN ATTACHMENT

134-4133 HOUSING GP-FLYWHEEL

134-4133 HOUSING GP-FLYWHEEL
AN ATTACHMENT

6I-3939 HOUSING GP-FLYWHEEL

6I-3939 HOUSING GP-FLYWHEEL
SAE #1. VERTICAL INSTALLATION WITH 10 DEGREE MOUNTING PADS
ALSO AN ATTACHMENT

9N-2086 HOUSING GP-FLYWHEEL

9N-2086 HOUSING GP-FLYWHEEL
PERMITS BOTH ZERO DEGREE AND 7.5 DEGREE ENGINE INSTALLATION ANGLES
AN ATTACHMENT

9N-2184 HOUSING GP-FLYWHEEL

9N-2184 HOUSING GP-FLYWHEEL
S/N 5EK1-1384
ALSO AN ATTACHMENT

9N-3887 HOUSING GP-FLYWHEEL

9N-3887 HOUSING GP-FLYWHEEL
S/N 5EK1-507
ALSO AN ATTACHMENT

9N-3887 HOUSING GP-FLYWHEEL

9N-3887 HOUSING GP-FLYWHEEL
S/N 5EK508-1820
ALSO AN ATTACHMENT

109-4314 PLUG GP-FLYWHEEL HOUSING

109-4314 PLUG GP-FLYWHEEL HOUSING
DRAIN
CANNOT BE USED WITH BRAKESAVER
ALSO AN ATTACHMENT

HOUSING GP-FRONT

102-2235 COVER GP-FRONT HOUSING

102-2235 COVER GP-FRONT HOUSING
CAM AND IDLER GEAR
CANNOT BE USED WITH FRONT SOUND COVERS
ALSO AN ATTACHMENT

108-4516 FASTENER GP-FRONT HOUSING

108-4516 FASTENER GP-FRONT HOUSING
FOR USE WITH BELT TIGHTENER
AN ATTACHMENT

108-9382 FASTENER GP-FRONT HOUSING

108-9382 FASTENER GP-FRONT HOUSING
ALSO AN ATTACHMENT

110-6984 FASTENER GP-FRONT HOUSING

110-6984 FASTENER GP-FRONT HOUSING
FORD, PROVIDES BOLT TO FASTEN FRONT HOUSING TO WATER PUMP HOUSING
CANNOT BE USED WITH ALTERNATOR OR BELT TIGHTENER
AN ATTACHMENT

112-2644 FASTENER GP-FRONT HOUSING

112-2644 FASTENER GP-FRONT HOUSING
PROVIDES 125 MM LONG FAN DRIVE MOUNTING STUDS
AN ATTACHMENT

4P-6846 FASTENER GP-FRONT HOUSING

4P-6846 FASTENER GP-FRONT HOUSING

102-8397 GEAR GP-FRONT

102-8397 GEAR GP-FRONT

102-2270 HOUSING GP-FRONT

102-2270 HOUSING GP-FRONT
NO SOUND SUPPRESSION
CANNOT BE USED WITH OIL FILL, BELT TIGHTENER, ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

102-2272 HOUSING GP-FRONT

102-2272 HOUSING GP-FRONT
S/N 5EK1-1743
SOUND SUPPRESSION
CANNOT BE USED WITH OIL FILL, BELT TIGHTENER, ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

108-4160 HOUSING GP-FRONT

108-4160 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH OIL FILL, BELT TIGHTENER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4161 HOUSING GP-FRONT

108-4161 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH BELT TIGHTENER, ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

108-4162 HOUSING GP-FRONT

108-4162 HOUSING GP-FRONT
FOR USE WITH FRONT OIL FILL
AN ATTACHMENT

108-4164 HOUSING GP-FRONT

108-4164 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH OIL FILLER
AN ATTACHMENT

108-4183 HOUSING GP-FRONT

108-4183 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH OIL FILLER, BELT TIGHTENER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4185 HOUSING GP-FRONT

108-4185 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH BELT TIGHTENER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4517 HOUSING GP-FRONT

108-4517 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH OIL FILLER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4518 HOUSING GP-FRONT

108-4518 HOUSING GP-FRONT
NO SOUND SUPPRESSION
FOR USE WITH CAM COVER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4519 HOUSING GP-FRONT

108-4519 HOUSING GP-FRONT
SOUND SUPPRESSION
FOR USE WITH OIL FILLER, ALTERNATOR MOUNTING
AN ATTACHMENT

108-4520 HOUSING GP-FRONT

108-4520 HOUSING GP-FRONT
SOUND SUPPRESSION
ALSO AN ATTACHMENT

LIFTING GP-ENGINE

108-6409 LIFTING GP-ENGINE

108-6409 LIFTING GP-ENGINE
AN ATTACHMENT

110-9540 LIFTING GP-ENGINE

110-9540 LIFTING GP-ENGINE
AN ATTACHMENT

111-2086 LIFTING GP-ENGINE

111-2086 LIFTING GP-ENGINE
REAR- HIGH PROFILE LIFTING EYE
ALSO AN ATTACHMENT

111-2087 LIFTING GP-ENGINE

111-2087 LIFTING GP-ENGINE
REAR, LOW PROFILE
AN ATTACHMENT

111-2088 LIFTING GP-ENGINE

111-2088 LIFTING GP-ENGINE
REAR, LOW PROFILE LIFTING EYE
ALSO AN ATTACHMENT

111-2089 LIFTING GP-ENGINE

111-2089 LIFTING GP-ENGINE
FRONT- OFFSET LIFTING EYE
FOR USE WITH ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

111-2355 LIFTING GP-ENGINE

111-2355 LIFTING GP-ENGINE
FRONT- OFFSET LIFTING EYE
CANNOT BE USED WITH ALTERNATOR MOUNTING
AN ATTACHMENT

112-2418 LIFTING GP-ENGINE

112-2418 LIFTING GP-ENGINE
FRONT LIFTING EYE
CANNOT BE USED WITH ALTERNATOR MOUNTING
AN ATTACHMENT

112-2422 LIFTING GP-ENGINE

112-2422 LIFTING GP-ENGINE
FRONT LIFTING EYE
FOR USE WITH ALTERNATOR MOUNTING
ALSO AN ATTACHMENT

6I-3902 LIFTING GP-ENGINE

6I-3902 LIFTING GP-ENGINE

MOUNTING GP-ALTERNATOR

108-4522 MOUNTING GP-ALTERNATOR

108-4522 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@108-4515@@@@@
AN ATTACHMENT

6I-3636 MOUNTING GP-ALTERNATOR

6I-3636 MOUNTING GP-ALTERNATOR
RIGHT HAND
FOR USE WITH @@@@@110-9531@@@@@
AN ATTACHMENT

9N-0478 MOUNTING GP-ALTERNATOR

9N-0478 MOUNTING GP-ALTERNATOR
2 GROOVE 3.25 INCH(82.55MM) DIAMETER PULLEY FOR 1/2 INCH BELTS
AN ATTACHMENT

9N-3399 MOUNTING GP-ALTERNATOR

9N-3399 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH BELT TIGHTENER OR BELT TIGHTENER FASTENER
AN ATTACHMENT

MOUNTING GP-ENGINE

107-9436 SUPPORT GP-ENGINE

107-9436 SUPPORT GP-ENGINE
8 INCH MOUNTING DIAMETER
AN ATTACHMENT

110-8875 SUPPORT GP-ENGINE

110-8875 SUPPORT GP-ENGINE
228.6MM (9 INCHES) FROM CENTERLINE OF CRANKSHAFT TO MOUNTING FACE OF SUPPORT
ALSO AN ATTACHMENT

122-8288 SUPPORT GP-ENGINE

122-8288 SUPPORT GP-ENGINE
PROVIDES MOUNTING ADAPTER PLATE
AN ATTACHMENT

130-0717 SUPPORT GP-ENGINE

130-0717 SUPPORT GP-ENGINE
228.8 MM FROM CENTERLINE OF CRANKSHAFT TO MOUNTING FACE OF SUPPORT
AN ATTACHMENT

4W-9068 SUPPORT GP-ENGINE

4W-9068 SUPPORT GP-ENGINE
S/N 5EK1-1743
PROVIDES A PERMANENT FRONT ENGINE SUPPORT
ALSO AN ATTACHMENT

6I-3950 SUPPORT GP-ENGINE

6I-3950 SUPPORT GP-ENGINE -FRONT

PAN GP-OIL

126-9572 ADAPTER GP-OIL PAN DRAIN

126-9572 ADAPTER GP-OIL PAN DRAIN
FOR USE WITH FRONT SUMP OIL PAN
AN ATTACHMENT

109-3290 FASTENER GP-OIL PAN

109-3290 FASTENER GP-OIL PAN
FOR USE WITH NON-BRAKESAVER ENGINES
AN ATTACHMENT

140-6327 FITTING GP-OIL PAN

140-6327 FITTING GP-OIL PAN
REQUIRED WHEN A CLOSED VENT AIR CLEANER SYSTEM IS NOT INSTALLED
FOR USE WITH @@@@@126-9140@@@@@
AN ATTACHMENT

140-6330 FITTING GP-OIL PAN

140-6330 FITTING GP-OIL PAN -ENGINE
PROVIDES PLUG FOR LH REAR OPENING IN OIL PAN
FOR USE WITH RH SUMP PUMP
AN ATTACHMENT

140-6331 FITTING GP-OIL PAN

140-6331 FITTING GP-OIL PAN -ENGINE
PROVIDES PLUG FOR RH REAR OPENING IN OIL PAN
FOR USE WITH LH SUMP PUMP
AN ATTACHMENT

105-3385 PAN GP-OIL

105-3385 PAN GP-OIL -ENGINE
FRONT DEEP SUMP, STANDARD DUTY
ALSO AN ATTACHMENT

105-3386 PAN GP-OIL

105-3386 PAN GP-OIL -ENGINE
REAR DEEP SUMP, STANDARD DUTY
ALSO AN ATTACHMENT

105-3386 PAN GP-OIL

105-3386 PAN GP-OIL -ENGINE
REAR DEEP SUMP, STANDARD DUTY
AN ATTACHMENT

109-2780 PAN GP-OIL

109-2780 PAN GP-OIL -ENGINE
FRONT SUMP, STANDARD DUTY
FOR USE WITH BRAKESAVER
AN ATTACHMENT

109-2781 PAN GP-OIL

109-2781 PAN GP-OIL -ENGINE
REAR SUMP- STANDARD DUTY- INTERNAL OIL LINES, COVER REQUIRED WITH MID-MOUNTED TURBOCHARGER
FOR USE WITH BRAKESAVER
ALSO AN ATTACHMENT

109-3285 PAN GP-OIL

109-3285 PAN GP-OIL -ENGINE
PROVIDES SET BACK OIL PAN AND INTERNAL OIL LINES
AN ATTACHMENT

109-3287 PAN GP-OIL

109-3287 PAN GP-OIL -ENGINE
FRONT SUMP, HEAVY DUTY
AN ATTACHMENT

109-3289 PAN GP-OIL

109-3289 PAN GP-OIL -ENGINE
REAR SUMP, HEAVY DUTY
AN ATTACHMENT

113-3314 PAN GP-OIL

113-3314 PAN GP-OIL
AN ATTACHMENT

118-8278 PAN GP-OIL

118-8278 PAN GP-OIL -ENGINE
PROVIDES FRONT STANDARD DUTY DEEP SUMP AND INTERNAL OIL LINES
AN ATTACHMENT

118-8280 PAN GP-OIL

118-8280 PAN GP-OIL
FOR USE WITH FRONT SUMP ENGINES ONLY
AN ATTACHMENT

118-8281 PAN GP-OIL

118-8281 PAN GP-OIL
FOR USE WITH FRONT SUMP ENGINES ONLY
AN ATTACHMENT

118-8477 PAN GP-OIL

118-8477 PAN GP-OIL -ENGINE
FOR USE WITH FRONT SUMP ENGINES ONLY
AN ATTACHMENT

126-9140 PAN GP-OIL

126-9140 PAN GP-OIL -ENGINE
SHALLOW, NO SOUND SUPPRESSION
AN ATTACHMENT

4P-7535 PAN GP-OIL

4P-7535 PAN GP-OIL
S/N 5EK1-828
ALSO AN ATTACHMENT

6I-4675 PAN GP-OIL

6I-4675 PAN GP-OIL
ALSO AN ATTACHMENT

9N-0664 PAN GP-OIL

9N-0664 PAN GP-OIL
S/N 5EK1-1819
ALSO AN ATTACHMENT

9Y-5344 PAN GP-OIL

9Y-5344 PAN GP-OIL
AN ATTACHMENT

9Y-5590 PAN GP-OIL

9Y-5590 PAN GP-OIL -ENGINE
AN ATTACHMENT

PARTS GP-MISCELLANEOUS

161-8335 KIT-ENGINE PARTS

161-8335 KIT-ENGINE PARTS
COSMETIC IMPROVEMENT OF VALVE COVERS, BLACK BREATHER ASSEMBLY, FUMES DISPOSAL HOSE AND VALVE COVER NAME PLATES
FOR USE WITH ALL BREATHER LOCATIONS WITH OIL FILL
CANNOT BE USED WITH LOW PROFILE BREATHER ASSEMBLY
AN ATTACHMENT

161-8337 KIT-ENGINE PARTS

161-8337 KIT-ENGINE PARTS
COSMETIC IMPROVEMENT OF VALVE COVERS, BLACK BREATHER ASSEMBLY, FUMES DISPOSAL HOSE AND VALVE COVER NAME PLATES
FOR USE WITH ALL BREATHER LOCATIONS WITH NO OIL FILL
CANNOT BE USED WITH LOW PROFILE BREATHER ASSEMBLY
AN ATTACHMENT

PISTON & ROD GP

0R-8913 CYLINDER PACK GP

0R-8913 CYLINDER PACK GP
PART OF 348-7339, 356-6807, 356-6810 PARTS GP-ENGINE OVERHAUL

107-2198 PISTON & ROD GP

107-2198 PISTON & ROD GP

133-7538 PISTON & ROD GP

133-7538 PISTON & ROD GP
16.25:1 COMPRESSION RATIO. JET AS-PISTON EFFECTIVE 6BR1159-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
FOR USE WITH 425 OR HIGHER HP ENGINE
AN ATTACHMENT

135-2851 PISTON & ROD GP

135-2851 PISTON & ROD GP
FOR USE WITH 425 OR LOWER HP ENGINE
AN ATTACHMENT

4P-5403 PISTON & ROD GP

4P-5403 PISTON & ROD GP

PULLEY GP

104-6725 DAMPER & PULLEY GP

104-6725 DAMPER & PULLEY GP
AN ATTACHMENT

4P-4291 DAMPER & PULLEY GP

4P-4291 DAMPER & PULLEY GP
S/N 5EK1-1743
7.5 INCH DIAMETER
ALSO AN ATTACHMENT

4P-4292 DAMPER & PULLEY GP

4P-4292 DAMPER & PULLEY GP
8.5 IN DIA PULLEY

4P-4293 DAMPER & PULLEY GP

4P-4293 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT

4P-4295 DAMPER & PULLEY GP

4P-4295 DAMPER & PULLEY GP
8.5 INCH DIAMETER
AN ATTACHMENT

4P-4296 DAMPER & PULLEY GP

4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT

4P-7491 DAMPER & PULLEY GP

4P-7491 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT

9Y-8712 DAMPER & PULLEY GP

9Y-8712 DAMPER & PULLEY GP

110-9531 PULLEY GP-ALTERNATOR

110-9531 PULLEY GP-ALTERNATOR
3.25 INCH (82.5MM) DIAMETER 2-GROOVE PULLEY
FOR USE WITH 1/2 INCH BELTS
AN ATTACHMENT

111-8319 PULLEY GP-CRANKSHAFT

111-8319 PULLEY GP-CRANKSHAFT
9.5IN (241.3MM) DIAMETER. 10 GROOVE POLY VEE PULLEY
AN ATTACHMENT

111-8320 PULLEY GP-CRANKSHAFT

111-8320 PULLEY GP-CRANKSHAFT
9.5IN (241.3MM) DIAMETER-10 GROOVE POLY VEE
AN ATTACHMENT

111-8321 PULLEY GP-CRANKSHAFT

111-8321 PULLEY GP-CRANKSHAFT
AN ATTACHMENT

111-8322 PULLEY GP-CRANKSHAFT

111-8322 PULLEY GP-CRANKSHAFT
10.87IN (276MM) DIAMETER-14 GROOVE POLY VEE
AN ATTACHMENT

111-8324 PULLEY GP-CRANKSHAFT

111-8324 PULLEY GP-CRANKSHAFT
7.5IN (190.5MM) DIAMETER-2 GROOVE
FOR USE WITH @@@@@111-8316@@@@@, @@@@@111-8317@@@@@
ALSO AN ATTACHMENT

111-8325 PULLEY GP-CRANKSHAFT

111-8325 PULLEY GP-CRANKSHAFT
8.5IN (215.9MM) DIAMETER-2 GROOVE
FOR USE WITH @@@@@111-8316@@@@@, @@@@@111-8317@@@@@
ALSO AN ATTACHMENT

111-8326 PULLEY GP-CRANKSHAFT

111-8326 PULLEY GP-CRANKSHAFT
8.5IN (215.9MM) DIAMETER WITH SPACER-2 GROOVE
FOR USE WITH @@@@@111-8316@@@@@, @@@@@111-8317@@@@@
AN ATTACHMENT

111-8327 PULLEY GP-CRANKSHAFT

111-8327 PULLEY GP-CRANKSHAFT
10.5INCH (266.7MM) DIAMETER-2 GROOVE
FOR USE WITH @@@@@111-8316@@@@@, @@@@@111-8317@@@@@
AN ATTACHMENT

111-8329 PULLEY GP-CRANKSHAFT

111-8329 PULLEY GP-CRANKSHAFT
9.5IN (241.3MM) DIAMETER-2 GROOVE
FOR USE WITH @@@@@111-8316@@@@@, @@@@@111-8317@@@@@
AN ATTACHMENT

111-8330 PULLEY GP-CRANKSHAFT

111-8330 PULLEY GP-CRANKSHAFT
9.5IN (241.3MM) DIAMETER WITH SPACER-2 GROOVE
FOR USE WITH @@@@@111-8316@@@@@, @@@@@111-8317@@@@@
AN ATTACHMENT

122-3537 PULLEY GP-CRANKSHAFT

122-3537 PULLEY GP-CRANKSHAFT
8 GROOVE POLY VEE
AN ATTACHMENT

SUPPRESSION GP-SOUND

110-5323 FASTENER GP-SOUND SUPPRESSION

110-5323 FASTENER GP-SOUND SUPPRESSION
FOR USE WITH RH SOUND PANEL
CANNOT BE USED WITH LH MOUNTED COOLANT CONDITIONER
AN ATTACHMENT

138-3928 FASTENER GP-SOUND SUPPRESSION

138-3928 FASTENER GP-SOUND SUPPRESSION
FOR USE WITH REAR SUMP ENGINES, LH MOUNTED OIL LEVEL GUIDES
AN ATTACHMENT

100-6750 PANEL GP-SOUND SUPPRESSION

100-6750 PANEL GP-SOUND SUPPRESSION
RH
AN ATTACHMENT

109-3292 PANEL GP-SOUND SUPPRESSION

109-3292 PANEL GP-SOUND SUPPRESSION
FOR USE WITH FRONT OR REAR SUMP
CANNOT BE USED WITH BRAKESAVER OR FORD FRONT SUMP ENGINES
ALSO AN ATTACHMENT

109-3293 PANEL GP-SOUND SUPPRESSION

109-3293 PANEL GP-SOUND SUPPRESSION
SET BACK OIL PAN
FOR USE WITH SHALLOW SUMP OIL PAN
AN ATTACHMENT

110-8001 PANEL GP-SOUND SUPPRESSION

110-8001 PANEL GP-SOUND SUPPRESSION
LH BLOCK MOUNTED
FOR USE WITH @@@@@ 9N-2243@@@@@, @@@@@ 9N-2579@@@@@, BRAKESAVER AND/OR 4 CYL AIR COMPRESSOR
ALSO AN ATTACHMENT

119-4691 PANEL GP-SOUND SUPPRESSION

119-4691 PANEL GP-SOUND SUPPRESSION -OIL PAN
SET BACK OIL PAN, FRONT SUMP
CANNOT BE USED WITH BRAKESAVER
AN ATTACHMENT

6I-3947 PANEL GP-SOUND SUPPRESSION

6I-3947 PANEL GP-SOUND SUPPRESSION
LH BLOCK MOUNTED
CANNOT BE USED WITH BRAKESAVER
ALSO AN ATTACHMENT

7W-8832 PANEL GP-SOUND SUPPRESSION

7W-8832 PANEL GP-SOUND SUPPRESSION
CANNOT BE USED WITH OIL PAN OR BRAKESAVER ENGINES
ALSO AN ATTACHMENT

9N-2243 PANEL GP-SOUND SUPPRESSION

9N-2243 PANEL GP-SOUND SUPPRESSION -ENGINE
SOUND SUPPRESSION-SUMP SECTION
FOR USE WITH BRAKESAVER REAR SUMP
ALSO AN ATTACHMENT

9N-2579 PANEL GP-SOUND SUPPRESSION

9N-2579 PANEL GP-SOUND SUPPRESSION -ENGINE
SOUND SUPPRESSION-SHALLOW SECTION
FOR USE WITH BRAKESAVER-REAR SUMP
ALSO AN ATTACHMENT

9Y-5297 PANEL GP-SOUND SUPPRESSION

9Y-5297 PANEL GP-SOUND SUPPRESSION
FOR USE WITH STANDARD OIL PAN WITH SOUND PLATE
AN ATTACHMENT

SERPENTINE/V-BELTS

4N-6373 V-BELT SET

4N-6373 V-BELT SET
1486 MM (58.50 INCH) LONG
AN ATTACHMENT

9L-6644 V-BELT SET

9L-6644 V-BELT SET
1549 MM (60 INCH) LONG
AN ATTACHMENT

VALVE MECHANISM GP

110-9528 BASE GP-VALVE COVER & INJ HARN

110-9528 BASE GP-VALVE COVER & INJ HARN
FOR ALL RATINGS
ALSO AN ATTACHMENT

122-1248 BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
AN ATTACHMENT

111-0413 COVER GP-VALVE MECHANISM

111-0413 COVER GP-VALVE MECHANISM
ALSO AN ATTACHMENT

112-4576 COVER GP-VALVE MECHANISM

112-4576 COVER GP-VALVE MECHANISM
AN ATTACHMENT

113-5251 COVER GP-VALVE MECHANISM

113-5251 COVER GP-VALVE MECHANISM
PART OF 128-9523, 128-9524, 128-9525, 128-9526, 128-9528 COVER GP-VALVE MECHANISM
AN ATTACHMENT

116-6085 COVER GP-VALVE MECHANISM

116-6085 COVER GP-VALVE MECHANISM
AN ATTACHMENT

124-0541 COVER GP-VALVE MECHANISM

124-0541 COVER GP-VALVE MECHANISM
AN ATTACHMENT

124-0542 COVER GP-VALVE MECHANISM

124-0542 COVER GP-VALVE MECHANISM
FOR USE WITH LOW PROFILE BREATHER
AN ATTACHMENT

125-1294 COVER GP-VALVE MECHANISM

125-1294 COVER GP-VALVE MECHANISM
PART OF 124-0541, 124-0542 COVER GP-VALVE MECHANISM
AN ATTACHMENT

128-9521 COVER GP-VALVE MECHANISM

128-9521 COVER GP-VALVE MECHANISM
PART OF 128-9523, 128-9524, 128-9525, 128-9526, 128-9528 COVER GP-VALVE MECHANISM
AN ATTACHMENT

128-9523 COVER GP-VALVE MECHANISM

128-9523 COVER GP-VALVE MECHANISM
Type 1
AN ATTACHMENT

128-9523 COVER GP-VALVE MECHANISM

128-9523 COVER GP-VALVE MECHANISM
Type 2
AN ATTACHMENT

128-9524 COVER GP-VALVE MECHANISM

128-9524 COVER GP-VALVE MECHANISM
FOR USE WITH LOW PROFILE BREATHER
AN ATTACHMENT

128-9525 COVER GP-VALVE MECHANISM

128-9525 COVER GP-VALVE MECHANISM
Type 1
AN ATTACHMENT

128-9525 COVER GP-VALVE MECHANISM

128-9525 COVER GP-VALVE MECHANISM
Type 2
AN ATTACHMENT

128-9526 COVER GP-VALVE MECHANISM

128-9526 COVER GP-VALVE MECHANISM
AN ATTACHMENT

128-9528 COVER GP-VALVE MECHANISM

128-9528 COVER GP-VALVE MECHANISM
FOR USE WITH LOW PROFILE BREATHER
AN ATTACHMENT

131-4116 COVER GP-VALVE MECHANISM

131-4116 COVER GP-VALVE MECHANISM
PART OF 128-9523, 128-9525 COVER GP-VALVE MECHANISM
AN ATTACHMENT

150-3141 COVER GP-VALVE MECHANISM

150-3141 COVER GP-VALVE MECHANISM
PART OF 161-8335, 161-8337 KIT-ENGINE PARTS
AN ATTACHMENT

150-3142 COVER GP-VALVE MECHANISM

150-3142 COVER GP-VALVE MECHANISM
PART OF 161-8335 KIT-ENGINE PARTS
AN ATTACHMENT

162-2312 COVER GP-VALVE MECHANISM

162-2312 COVER GP-VALVE MECHANISM
BLACK ISOLATED VALVE COVER WITH AN ADAPTER FOR MOUNTING A PLASTIC VALVE COVER BREATHER ASSEMBLY
PART OF 161-8335, 161-8337 KIT-ENGINE PARTS
AN ATTACHMENT

4P-5405 COVER GP-VALVE MECHANISM

4P-5405 COVER GP-VALVE MECHANISM
ALUMINUM, MID MOUNTED BREATHER
ALSO AN ATTACHMENT

4P-5405 COVER GP-VALVE MECHANISM

4P-5405 COVER GP-VALVE MECHANISM
ALUMINUM, MID MOUNTED BREATHER

6I-3936 COVER GP-VALVE MECHANISM

6I-3936 COVER GP-VALVE MECHANISM
REAR VALVE COVER OIL FILL AND MID MOUNTED BREATHER
Type 1
AN ATTACHMENT

6I-3936 COVER GP-VALVE MECHANISM

6I-3936 COVER GP-VALVE MECHANISM
REAR VALVE COVER OIL FILL AND MID MOUNTED BREATHER
Type 2
AN ATTACHMENT

6I-3937 COVER GP-VALVE MECHANISM

6I-3937 COVER GP-VALVE MECHANISM
Type 1
AN ATTACHMENT

6I-3937 COVER GP-VALVE MECHANISM

6I-3937 COVER GP-VALVE MECHANISM
Type 2
AN ATTACHMENT

6I-3938 COVER GP-VALVE MECHANISM

6I-3938 COVER GP-VALVE MECHANISM
Type 1
AN ATTACHMENT

6I-3938 COVER GP-VALVE MECHANISM

6I-3938 COVER GP-VALVE MECHANISM
Type 2
AN ATTACHMENT

6I-3941 COVER GP-VALVE MECHANISM

6I-3941 COVER GP-VALVE MECHANISM
ALUMINUM, REAR MOUNTED BREATHER, FRONT MOUNTED OIL FILL
Type 1
AN ATTACHMENT

6I-3941 COVER GP-VALVE MECHANISM

6I-3941 COVER GP-VALVE MECHANISM
ALUMINUM, REAR MOUNTED BREATHER, FRONT MOUNTED OIL FILL
Type 2
AN ATTACHMENT

6I-4423 COVER GP-VALVE MECHANISM

6I-4423 COVER GP-VALVE MECHANISM
REAR MOUNTED BREATHER
AN ATTACHMENT

6I-4423 COVER GP-VALVE MECHANISM

6I-4423 COVER GP-VALVE MECHANISM
REAR MOUNTED BREATHER
ALSO AN ATTACHMENT

6I-4424 COVER GP-VALVE MECHANISM

6I-4424 COVER GP-VALVE MECHANISM
MID MOUNTED BREATHER
Type 1
AN ATTACHMENT

6I-4424 COVER GP-VALVE MECHANISM

6I-4424 COVER GP-VALVE MECHANISM
MID MOUNTED BREATHER
Type 2
AN ATTACHMENT

6I-4683 COVER GP-VALVE MECHANISM

6I-4683 COVER GP-VALVE MECHANISM
MID MOUNTED OIL FILL, FRONT MOUNTED BREATHER
Type 1
AN ATTACHMENT

6I-4683 COVER GP-VALVE MECHANISM

6I-4683 COVER GP-VALVE MECHANISM
MID MOUNTED OIL FILL, FRONT MOUNTED BREATHER
Type 2
AN ATTACHMENT

6I-4684 COVER GP-VALVE MECHANISM

6I-4684 COVER GP-VALVE MECHANISM
FOR USE WITH FRONT MOUNTED FUMES DISPOSAL GP
AN ATTACHMENT

6I-4684 COVER GP-VALVE MECHANISM

6I-4684 COVER GP-VALVE MECHANISM
FOR USE WITH FRONT MOUNTED FUMES DISPOSAL GP
ALSO AN ATTACHMENT

109-1657 FASTENER GP-VALVE MECHANISM

109-1657 FASTENER GP-VALVE MECHANISM
ALSO AN ATTACHMENT

6I-1480 MECHANISM GP-FUEL PUMP & VALVE

6I-1480 MECHANISM GP-FUEL PUMP & VALVE
ALSO AN ATTACHMENT

6I-1940 MECHANISM GP-FUEL PUMP & VALVE

6I-1940 MECHANISM GP-FUEL PUMP & VALVE
FOR USE WITH A FASTENER GP FOR NON-JAKE BRAKE APPLICATIONS
ALSO AN ATTACHMENT

103-2049 ROCKER ARM GP

103-2049 ROCKER ARM GP
PART OF 6I-1480, 6I-1940 MECHANISM GP-FUEL PUMP & VALVE
ALSO AN ATTACHMENT

ENGINE OVERHAUL KIT

348-7073 KIT-ENGINE OVERHAUL

348-7073 KIT-ENGINE OVERHAUL
5EK1-99999 FOR 114-8785 AND 6TS1-20554 FOR 133-7746
PART OF 348-7339, 348-7346, 356-6807, 356-6808, 356-6810, 356-6811 PARTS GP-ENGINE OVERHAUL
FOR USE WITH IN FRAME OVERHAUL FOR THE 3406E ON HIGHWAY TRUCKS
FIELD INSTALLATION

348-7339 PARTS GP-ENGINE OVERHAUL

348-7339 PARTS GP-ENGINE OVERHAUL
5EK1-99999 FOR 112-6373 AND 6TS1-20554 FOR 131-3674
PART OF 356-6807 PARTS GP-ENGINE OVERHAUL
FOR USE WITH IN FRAME OVERHAUL FOR THE 3406E ON HIGHWAY TRUCKS
FIELD INSTALLATION

348-7346 PARTS GP-ENGINE OVERHAUL

348-7346 PARTS GP-ENGINE OVERHAUL
PART OF 356-6808, 356-6810, 356-6811 PARTS GP-ENGINE OVERHAUL
FOR USE WITH IN FRAME OVERHAUL FOR THE 3406E ON HIGHWAY TRUCKS WITH LESS THAN 455 HP, (110-9643, 5EK1-UP), (134-1700, 6TS1-20554)
FIELD INSTALLATION

356-6807 PARTS GP-ENGINE OVERHAUL

356-6807 PARTS GP-ENGINE OVERHAUL
CONTAINS THE FOLLOWING OVERHAUL KITS FOR THE 3406E ENGINE: BRONZE, SILVER, GOLD, AND PLATINUM
FOR USE WITH 5EK1-99999 AND 6TS1-20554 (500-550 HP), 5EK67193-99999 AND 6TS1-20554 (475 HP)
FIELD INSTALLATION

356-6808 PARTS GP-ENGINE OVERHAUL

356-6808 PARTS GP-ENGINE OVERHAUL
CONTAINS THE FOLLOWING OVERHAUL KITS FOR THE 3406E ENGINE: BRONZE, SILVER, GOLD, AND PLATINUM
FOR USE WITH 5EK1-67192 (435-475 HP)
FIELD INSTALLATION

356-6810 PARTS GP-ENGINE OVERHAUL

356-6810 PARTS GP-ENGINE OVERHAUL
CONTAINS THE FOLLOWING OVERHAUL KITS FOR THE 3406E ENGINE: BRONZE, SILVER, GOLD, AND PLATINUM
FOR USE WITH 5EK1-53003 (455 HP) AND 5EK1185-53003 (435 HP)
FIELD INSTALLATION

356-6811 PARTS GP-ENGINE OVERHAUL

356-6811 PARTS GP-ENGINE OVERHAUL
CONTAINS THE FOLLOWING OVERHAUL KITS FOR THE 3406E ENGINE: BRONZE, SILVER, GOLD, AND PLATINUM
FOR USE WITH 5EK1-99999 (355-410 HP) AND 6TS1-20554 (355-410 HP)
FIELD INSTALLATION

Information:

(For parts list, see above)

BASIC ENGINE

ADAPTER GP-ENGINE TO XMSN

Specifications

Engine to Transmission Adapter
3406E Truck Engine

AIR COMPRESSOR GP

General Service Information

Introduction
BENDIX AIR COMPRESSOR TU-FLO 1400 AIR COMP

Tu-Flo 1400 Air Compressor
BENDIX AIR COMPRESSOR TU-FLO 1400 AIR COMP

Introduction
BENDIX AIR COMPRESSOR

Description
BENDIX AIR COMPRESSOR

Operation
BENDIX AIR COMPRESSOR

Intake And Compression Of Air (Loaded)
BENDIX AIR COMPRESSOR

Air Induction
BENDIX AIR COMPRESSOR

Preventative Maintenance
BENDIX AIR COMPRESSOR

Removal And Disassembly
BENDIX AIR COMPRESSOR

Cleaning Of Parts
BENDIX AIR COMPRESSOR

Inspection Of Parts
BENDIX AIR COMPRESSOR

Repairs
BENDIX AIR COMPRESSOR

Assembly
BENDIX AIR COMPRESSOR

Tu-Flo 550 Specifications
BENDIX AIR COMPRESSOR

Torque Specifications
BENDIX AIR COMPRESSOR

Dimensional Data
BENDIX AIR COMPRESSOR

Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR

Compressor Troubleshooting
BENDIX AIR COMPRESSOR

Introduction
BENDIX AIR COMPRESSOR

Description
BENDIX AIR COMPRESSOR

Operation
BENDIX AIR COMPRESSOR

Air Induction
BENDIX AIR COMPRESSOR

Preventative Maintenance
BENDIX AIR COMPRESSOR

Removal And Disassembly
BENDIX AIR COMPRESSOR

Cleaning Of Parts
BENDIX AIR COMPRESSOR

Inspection Of Parts
BENDIX AIR COMPRESSOR

Repairs
BENDIX AIR COMPRESSOR

Assembly
BENDIX AIR COMPRESSOR

Tu-Flo 750 Specifications
BENDIX AIR COMPRESSOR

Torque Specifications
BENDIX AIR COMPRESSOR

Dimensional Data
BENDIX AIR COMPRESSOR

Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR

Compressor Troubleshooting
BENDIX AIR COMPRESSOR

EL-740 Air Compressor
MIDLAND AIR COMPRESSORS

EL-1300/EL-1600 Air Compressors
MIDLAND AIR COMPRESSORS

Truck Engine News

Fabricated Tool For Holding Air Compressor Drive Gear While Tightening Nut On Compressor Crankshaft{0600,1803}
1995/02/01

124-5572 Air Pressure Relief Valve Available{1803}
1995/04/01

Precautionary Measures For Air Compressor Pressure Relief Valve{1803}
1996/08/23

Cylinder Head Gasket Changed For Tu-Flo 550/750 Air Compressor Groups{1803}
1997/07/01

Air Compressor Drive Gear Holding Tool Available{0700,1803}
1999/02/01

Special Instructions Are Now Available For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated, Eliminating Inlet Regulating Valve And Related Maintenance{1803}
1999/07/01

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Product Support Program For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated On Certain 3176B, C-10, C12, And 3406E Engines
Product Support Program For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated On Certain 3176B, C-10, C12, And 3406E Engines

Service Letter-Australia

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-CFEL

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-Americas

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-Truck/Ag/Marine

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Technical Information Bulletin

Converting 4 Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated
Converting 4 Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated

Specifications

Accessory Drive (Air Compressor)
3406E Truck Engine

Service Letter-China

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-Asia

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-APD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Magazine

Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21

BELT TIGHTENER GP

Specifications

Belt Tension Chart
3406E Truck Engine

Belt Tensioner
3406E Truck Engine

Service Magazine

New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04

ENGINE BRAKE GP

Truck Engine News

New Jake Brake Factory Setting{1119}
1995/07/01

New Jake Brake Factory Setting{1119}
1995/09/01

False Logging Of Engine Retarder Diagnostic Codes{1900,1901,1119}
1996/01/23

False Logging Of Cylinder Fault Codes While Using The Engine Retarder{1900,1901,1119}
1996/03/27

New O-ring Seals In BrakeSaver Group{1155}
1996/08/23

New Lighter Weight Housing Assembly Used In Engine Brake Group{1119}
1997/10/20

New Adjustment Procedure For Jake Brake (Models 340/340A/340B) Slave Piston Lash{1119}
1998/12/01

Jake Brake Settings For The 3406E Truck Engines {1119}
1999/05/01

Special Instruction

Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}

Specifications

BrakeSaver Control Valve
3406E Truck Engine

BrakeSaver
3406E Truck Engine

Systems Operation

Compression Brake
3406E Truck Engines

BrakeSaver
3406E Truck Engines

Testing and Adjusting

Compression Brake
3406E Truck Engines

Disassembly and Assembly

Compression Brake - Remove - If Equipped
3406E Engine

Compression Brake - Install - If Equipped
3406E Engine

BrakeSaver - Disassemble
3406E Engine

BrakeSaver Engine Oil Pump - Disassemble
3406E Engine

BrakeSaver Engine Oil Pump - Assemble
3406E Engine

BrakeSaver - Assemble
3406E Engine

BrakeSaver Control Valve - Disassemble
3406E Engine

BrakeSaver Control Valve - Assemble
3406E Engine

Service Magazine

Different Mounting Hole Locations In Ring Gear Plate Assembly And Rotor Assembly For BrakeSaver{1155}
1979/09/03

CAMSHAFT GP

Truck Engine News

New 8T2998 Lubricant Available
1986/02/01

New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01

Modification For 9U-7256 Guide Assembly (Camshaft){1210,0701,0702,0703}
1996/02/26

Camshaft Conversion Kits Available{1110}
1996/03/27

Improvements To Camshafts, Unit Injector Rocker Arms, And Valve Rocker Arms{1123,1210}
1996/03/27

A New Special Instruction Is Available To Help Determine The Reusability Of Camshafts In 3406E Truck Engines {0374,1210}
1999/05/01

Engine News

132-3904 Camshaft Retainer Holds Camshaft In Cylinder Head{1100}
1997/04/01

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25

Service Letter-NACD

Service Letter Cancellation
Service Letter Cancellation

PRODUCT SUPPORT PROGRAM FOR INSTALLING A CAMSHAFT KIT ON CERTAIN 3406E TRUCK ENGINES WITH MILEAGE UP TO 500,000
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CAMSHAFT KIT ON CERTAIN 3406E TRUCK ENGINES WITH MILEAGE UP TO 500,000

Service Letter-Australia

Service Letter Cancellation
Service Letter Cancellation

Service Letter-CFEL

Service Letter Cancellation
Service Letter Cancellation

Service Letter-CSARL

Service Letter-Americas

Service Letter Cancellation
Service Letter Cancellation

Service Letter-Truck/Ag/Marine

Service Letter Cancellation
Service Letter Cancellation

Specifications

Camshaft
3406E Truck Engine

Service Letter-China

Service Letter Cancellation
Service Letter Cancellation

Service Letter-Asia

Service Letter Cancellation
Service Letter Cancellation

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Service Letter Cancellation
Service Letter Cancellation

Disassembly and Assembly

Camshaft - Remove
3406E Engine

Camshaft - Install
3406E Engine

Camshaft Bearings - Remove
3406E Engine

Camshaft Bearings - Install
3406E Engine

Service Magazine

Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30

New 8T2998 Lubricant Available{0645,1210}
1986/02/17

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16

CLUTCH GP

Truck Engine News

Troubleshooting Information For Horton Diesltemp© Fan Clutches{1359}
1996/02/26

COUPLING GP

Service Magazine

Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03

CRANKSHAFT GP

Truck Engine News

Use 6V6035 Hardness Tester On Crankshafts
1982/03/31

Inspection Marks On Bearings
1982/05/19

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08

Reuse Of Engine Bearings
1983/12/21

Crankshaft Failures
1983/12/21

Remanufactured Undersize Crankshafts Are Available
1984/04/04

Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01

New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01

Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/01

Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01

Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27

Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear{1204}
1998/06/01

Engine News

New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13

6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10

Special Instruction

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Technical Information Bulletin

NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME

Specifications

Connecting Rod Bearing Journal
3406E Truck Engine

Main Bearing Journal
3406E Truck Engine

Crankshaft
3406E Truck Engine

Disassembly and Assembly

Bearing Clearance - Check
3406E Engine

Crankshaft Front Seal - Install
3406E Engine

Crankshaft Main Bearings - Remove
3406E Engine

Crankshaft Front Seal - Remove
3406E Engine

Crankshaft - Remove
3406E Engine

Crankshaft - Install
3406E Engine

Crankshaft Rear Seal - Remove
3406E Engine

Service Magazine

6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Crankshaft Failures{1202,1230}
1983/11/21

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

CYLINDER BLOCK GP

Truck Engine News

Inspection Marks On Bearings
1982/05/19

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08

Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08

New Liner Seat Insert Available
1983/08/31

New Cylinder Liner Available
1986/02/01

Cylinder Pack Puller Groups Improved
1992/12/01

Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01

Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/01

New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01

New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26

New Spacer Plate Gasket Helps Prevent Oil Leaks{1221}
1996/06/24

New Spacer Plate Gasket Helps Prevent Oil Leaks{1221}
1996/07/30

Use Two Piece Ferrous Articulated Pistons Instead Of Aluminum Pistons {1214,1331}
1996/09/01

Improved Plate Gasket Used In Cylinder Block Groups{1221}
1997/10/20

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18

New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03

Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05

Change In Procedure To Check Main Bearing Clearance
1978/08/30

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE SPACER PLATE ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE SPACER PLATE ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Technical Information Bulletin

Liner Flange Breakage
Liner Flange Breakage

Specifications

Cylinder Block
3406E Truck Engine

Main Bearing Journal
3406E Truck Engine

Cylinder Liner
3406E Truck Engine

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Testing and Adjusting

Basic Block
3406E Truck Engines

Disassembly and Assembly

Bearing Clearance - Check
3406E Engine

Crankshaft Main Bearings - Remove
3406E Engine

Cylinder Liner - Remove
3406E Engine

Piston Cooling Jets - Remove and Install
3406E Engine

Camshaft Bearings - Remove
3406E Engine

Camshaft Bearings - Install
3406E Engine

Cylinder Liner - Install
3406E Engine

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

New Liner Seat Insert Available{1217}
1983/08/15

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Cylinder Block Groups Used{1201}
1984/10/01

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

New Cylinder Liner Available{1201}
1986/02/10

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

CYLINDER HEAD GP

Truck Engine News

Separate Valve Stem Gauges Available
1982/06/23

Engine Valve Stem "use Again " Specifications
1983/03/02

New Liner Seat Insert Available
1983/08/31

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23

New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01

Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/01/01

Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22

Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01

Additional Parts Now Provided With 0R-4180 Remanufactured Cylinder Head Assembly{1100}
1994/09/01

Inspection Of Valve Guide Seals{1104}
1995/07/01

New And Reconditioned Valve Projection Specifications{1105}
1995/08/01

New Intake And Exhaust Valves Have Chrome Plated Stems{1105}
1995/11/28

New Stronger Cylinder Head Bolts Used{1100}
1996/06/24

Be Sure To Order The Correct Remanufactured Cylinder Head For 3406E (5EK, 6TS) Truck Engines{1100}
1998/06/01

Engine News

Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18

132-3904 Camshaft Retainer Holds Camshaft In Cylinder Head{1100}
1997/04/01

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25

5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29

Tolerance Added To Valve Clearance Specifications
1978/01/18

Use Again Specifications For Valve Springs Are Changed
1978/03/01

Special Instruction

3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}

Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}

Specifications

Cylinder Head
3406E Truck Engine

Cylinder Head Valves
3406E Truck Engine

Information Release Memo

CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS

LOWER COST C-15 & C15 ACERT REMAN CYLINDER HEAD OPTIONS
LOWER COST C-15 & C15 ACERT REMAN CYLINDER HEAD OPTIONS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Disassembly and Assembly

Electronic Unit Injector Sleeve - Install
3406E Engine

Electronic Unit Injector Sleeve - Remove
3406E Engine

Camshaft Bearings - Remove
3406E Engine

Camshaft Bearings - Install
3406E Engine

Cylinder Head - Remove
3406E Engine

Inlet and Exhaust Valve Guides - Remove and Install
3406E Engine

Inlet and Exhaust Valves - Remove and Install
3406E Engine

Inlet and Exhaust Valve Seat Inserts - Remove and Install
3406E Engine

Inlet and Exhaust Valve Seals - Remove and Install
3406E Engine

Inlet and Exhaust Valve Springs - Remove and Install
3406E Engine

Rocker Arm and Shaft - Install
3406E Engine

Rocker Arm and Shaft - Remove
3406E Engine

Service Magazine

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28

New Liner Seat Insert Available{1217}
1983/08/15

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17

New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15

Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30

Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30

Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07

Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04

124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09

9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27

DAMPER GP

Truck Engine News

New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01

Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01

Viscous Damper Assembly Used In Production{1205}
1996/04/19

Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27

Service Letter-NACD

Product Support Program For Increasing The Top Engine Limit Up To 2120 RPM And Installing A Viscous Damper On Certain 435 HP Rated 3406E Truck Engines
Product Support Program For Increasing The Top Engine Limit Up To 2120 RPM And Installing A Viscous Damper On Certain 435 HP Rated 3406E Truck Engines

Service Letter-Australia

Service Letter-CFEL

Service Letter-Americas

Service Letter-Truck/Ag/Marine

Specifications

Vibration Damper
3406E Truck Engine

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
3406E Engine

Service Magazine

Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

DRIVE GP-ACCESSORY

Truck Engine News

Special Instruction Available For New Dedicated Power Take-Off (PTO){1900,1165}
1995/05/01

DRIVE GP-AUXILIARY

DRIVE GP-FAN

Troubleshooting Information For Horton Diesltemp© Fan Clutches{1359}
1996/02/26

Specifications

Fan Drive
3406E Truck Engine

Disassembly and Assembly

Fan Drive - Disassemble
3406E Engine

Fan Drive - Assemble
3406E Engine

Fan Drive - Remove
3406E Engine

Service Magazine

New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04

DRIVE GP-PUMP

Truck Engine News

New Standpipe Installed On Water Pumps{1361}
1995/07/01

Engine News

Improved Water Pump Groups Available{1361}
1996/11/01

Special Instruction

Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}

Service Letter-NACD

Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock

Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-Australia

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-CFEL

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-CSARL

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-Americas

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-China

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-Asia

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Letter-APD

Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines
Product Improvement Program For Replacing Water Pumps On 3406E (5EK) Truck Engines

Service Magazine

New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05

Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13

Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13

DRIVE GP-WATER PUMP

Service Letter-NACD

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Service Letter-China

Service Letter-Asia

Service Letter-APD

Service Magazine

New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05

Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13

Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13

ENGINE GP

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

Testing The Starter On The Engine{1401,1450}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21

Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24

Engine Coolant Can Be Recycled{1395}
1989/11/13

FLYWHEEL GP

Truck Engine News

Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01

Timing Hole In Wrong Location In Allison Flexplates{1003}
1998/06/01

Special Instruction

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Specifications

Engine to Transmission Adapter
3406E Truck Engine

Flywheel
3406E Truck Engine

Disassembly and Assembly

Flywheel - Remove
3406E Engine

Flywheel - Install
3406E Engine

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

GEAR GP

Truck Engine News

New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01

Timing Procedure Aid{1206,1162,1166}
1995/11/28

New Gaskets And Fasteners Used In Front Cover-To-Plate And Plate-To-Block Connection; New Gear Assembly And Bearing Used In The Front Gear Train{1151,1162,1206}
1996/05/28

Timing Procedure Aid -Alignment Of Timing Gear Marks On 3406 Engines{1206}
1997/01/27

New Idler Gear Stub Shaft Assembly And Idler Gear Assembly Used In Front Gear Group{1206}
1997/05/27

Installation Of Sleeve Bearing In Cluster Gear Assembly In Front Gear Group{1206}
1998/01/23

Do Not Reuse The Spring Washers That Are Between The Front Cover And Front Plate On Some 3406E Truck Engines{1162}
1998/05/01

Air Compressor Drive Gear Holding Tool Available{0700,1803}
1999/02/01

Special Instruction

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Specifications

Gear Group (Front)
3406E Truck Engine

Disassembly and Assembly

Gear Group (Front) - Remove
3406E Engine

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Timing Procedure Aid {1206,1162,1166}
1997/01/27

HOUSING GP-FLYWHEEL

Truck Engine News

Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01

Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01

Service Magazine

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29

HOUSING GP-FRONT

Truck Engine News

Timing Procedure Aid{1206,1162,1166}
1995/11/28

New Gaskets And Fasteners Used In Front Cover-To-Plate And Plate-To-Block Connection; New Gear Assembly And Bearing Used In The Front Gear Train{1151,1162,1206}
1996/05/28

Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01

New Idler Gear Stub Shaft Assembly And Idler Gear Assembly Used In Front Gear Group{1206}
1997/05/27

Installation Of Sleeve Bearing In Cluster Gear Assembly In Front Gear Group{1206}
1998/01/23

Do Not Reuse The Spring Washers That Are Between The Front Cover And Front Plate On Some 3406E Truck Engines{1162}
1998/05/01

Special Instruction

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPAIRING FRONT COVER, PLATE, BLOCK JOINT, AND FAN BRACKET MOUNTING STUD OIL LEAKS ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPAIRING FRONT COVER, PLATE, BLOCK JOINT, AND FAN BRACKET MOUNTING STUD OIL LEAKS ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS

PRODUCT SUPPORT PROGRAM FOR REPAIRING FRONT COVER OIL LEAKS ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPAIRING FRONT COVER OIL LEAKS ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS

Service Letter-Australia

Service Letter-CFEL

Service Letter-Americas

Service Letter-Truck/Ag/Marine

Specifications

Housing (Front)
3406E Truck Engine

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Housing (Front) - Remove
3406E Engine

Housing (Front) - Install
3406E Engine

LIFTING GP-ENGINE

Service Magazine

124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09

MISCELLANEOUS INFORMATION

Truck Engine News

Use 6V6035 Hardness Tester On Crankshafts
1982/03/31

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19

Inspection Marks On Bearings
1982/05/19

Separate Valve Stem Gauges Available
1982/06/23

Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08

Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08

Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08

Engine Valve Stem "use Again " Specifications
1983/03/02

Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29

New Liner Seat Insert Available
1983/08/31

Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23

Reuse Of Engine Bearings
1983/12/21

Crankshaft Failures
1983/12/21

Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01

New 8T2998 Lubricant Available
1986/02/01

New Cylinder Liner Available
1986/02/01

Valve Lash Adjustment Interval Is Changed
1986/07/01

New Engine Timing Indicator Group Available
1986/07/01

Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01

Plasma Top Piston Rings Replace Chrome Rings
1989/09/01

Cylinder Pack Puller Groups Improved
1992/12/01

Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01

Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22

Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01

New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01

Special Instruction Available For New Dedicated Power Take-Off (PTO){1900,1165}
1995/05/01

New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01

New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13

6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10

Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15

New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25

5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29

Tolerance Added To Valve Clearance Specifications
1978/01/18

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18

Use Again Specifications For Valve Springs Are Changed
1978/03/01

New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03

Change In Procedure To Check Main Bearing Clearance
1978/08/30

Special Instruction

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines
The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Testing and Adjusting

Basic Block
3406E Truck Engines

Service Magazine

6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22

Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17

Crankshaft Failures{1202,1230}
1983/11/21

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04

New Cylinder Block Groups Used{1201}
1984/10/01

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Two Different Piston Oil Ring Designs Used{1215}
1985/11/11

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16

New Cylinder Liner Available{1201}
1986/02/10

New 8T2998 Lubricant Available{0645,1210}
1986/02/17

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30

Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21

Engine Coolant Can Be Recycled{1395}
1989/11/13

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

New Piston Pin Retainer Used{1225}
1991/10/14

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

MOUNTING GP-ALTERNATOR

Improved Alternator Groups Now Available{1405}
1998/05/04

MOUNTING GP-ENGINE

Specifications

Engine Support (Front)
3406E Truck Engine

PAN GP-OIL

Truck Engine News

New Oil Pan Resists Cracking{1302}
1996/02/26

Service Letter-Australia

Product Support Program For Installing A 9N3167 Sump Plate To Certain 3406E Truck Engines Installed In Western Star Primemovers
Product Support Program For Installing A 9N3167 Sump Plate To Certain 3406E Truck Engines Installed In Western Star Primemovers

Service Letter-CFEL

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Engine Oil Pan - Remove and Install
3406E Engine

Service Magazine

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

PARTS GP-MISCELLANEOUS

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

PISTON & ROD GP

Truck Engine News

Inspection Marks On Bearings
1982/05/19

Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08

Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29

Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05

Reuse Of Engine Bearings
1983/12/21

Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01

Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/11/01

Plasma Top Piston Rings Replace Chrome Rings
1989/09/01

New Piston Pin Retainer Used
1991/10/01

Cylinder Pack Puller Groups Improved
1992/12/01

Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01

Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/01

Proper Method For Cleaning Anodized-Coated Aluminum Pistons{1214}
1995/07/01

Use Two Piece Ferrous Articulated Pistons Instead Of Aluminum Pistons {1214,1331}
1996/09/01

Optional Service Replacement Aluminum Piston Cylinder Kit Available {1241,1331}
1999/10/01

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22

New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03

Special Instruction

Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter Cancellation
Service Letter Cancellation

Product Support Program For Replacing Aluminum Pistons on Certain 3406E Truck Engines With Mileage Between 500,000 And 750,000
Product Support Program For Replacing Aluminum Pistons on Certain 3406E Truck Engines With Mileage Between 500,000 And 750,000

Product Support Program For Replacing Aluminum Pistons In Certain 3406E Truck Engines Rated At 410 Horsepower And Below
Product Support Program For Replacing Aluminum Pistons In Certain 3406E Truck Engines Rated At 410 Horsepower And Below

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Product Support Program For Replacing Aluminum Pistons In Certain 3406E Truck Engines (410 HP And Below) Up to 500,000 Miles
Product Support Program For Replacing Aluminum Pistons In Certain 3406E Truck Engines (410 HP And Below) Up to 500,000 Miles

PRODUCT SUPPORT PROGRAM FOR ADDING OIL STABILIZER TO REDUCE OIL CONSUMPTION DURING EXTENDED PERIODS OF IDLE ON CERTAIN 3406E,C-15, AND C-16 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR ADDING OIL STABILIZER TO REDUCE OIL CONSUMPTION DURING EXTENDED PERIODS OF IDLE ON CERTAIN 3406E,C-15, AND C-16 TRUCK ENGINES

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter Cancellation
Service Letter Cancellation

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter Cancellation
Service Letter Cancellation

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter Cancellation
Service Letter Cancellation

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Technical Information Bulletin

Connecting Rod Bearings
Connecting Rod Bearings

Specifications

Connecting Rod
3406E Truck Engine

Piston and Rings
3406E Truck Engine

Connecting Rod Bearing Journal
3406E Truck Engine

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter Cancellation
Service Letter Cancellation

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter Cancellation
Service Letter Cancellation

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter Cancellation
Service Letter Cancellation

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Disassembly and Assembly

Bearing Clearance - Check
3406E Engine

Pistons and Connecting Rods - Remove
3406E Engine

Pistons and Connecting Rods - Assemble
3406E Engine

Pistons and Connecting Rods - Disassemble
3406E Engine

Piston Cooling Jets - Remove and Install
3406E Engine

Connecting Rod Bearings - Remove
3406E Engine

Pistons and Connecting Rods - Install
3406E Engine

Connecting Rod Bearings - Install
3406E Engine

Service Magazine

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22

Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18

Reuse Of Engine Bearings{1230}
1983/05/16

Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Two Different Piston Oil Ring Designs Used{1215}
1985/11/11

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06

Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21

5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Piston Pin Retainer Used{1225}
1991/10/14

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31

Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13

POWER PACK GP

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24

Engine Coolant Can Be Recycled{1395}
1989/11/13

PULLEY GP

Truck Engine News

New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01

Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01

Viscous Damper Assembly Used In Production{1205}
1996/04/19

Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27

Special Instruction

Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
3406E Engine

Service Magazine

New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23

New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25

New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

TOOLS

Truck Engine News

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19

Separate Valve Stem Gauges Available
1982/06/23

Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08

New Engine Timing Indicator Group Available
1986/07/01

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01

Cylinder Pack Puller Groups Improved
1992/12/01

Possible Interference Problem With 9U-7241 Valve Spring Compressor Group{0703}
1994/01/01

Check 9U-7242 Valve Spring Compressor Plate For Correct Thickness{0703}
1994/10/01

Injector Sleeve Tooling Modification{0701,0706}
1995/10/01

Modification For 9U-7256 Guide Assembly (Camshaft){1210,0701,0702,0703}
1996/02/26

Engine News

6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10

Special Instruction

Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}

Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}

Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Tool Operating Manual

Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes

Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}

Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}

Using the 7X1700 Communication Adapter Group{0781, 0782}
Using the 7X1700 Communication Adapter Group{0781, 0782}

Service Magazine

6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

New Engine Timing Indicator Group Available {0781,0782}
1986/07/07

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17

Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Service Tools For Electronic Controls {0781,0782}
1994/04/25

124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09

9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27

Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09

Use 140-2266 Harness Assembly (70-Pin Breakout "T") For Testing And Adjusting{1900,0781}
1998/03/23

Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30

SERPENTINE/V-BELTS

Specifications

Belt Tension Chart
3406E Truck Engine

VALVE MECHANISM GP

Truck Engine News

New 8T2998 Lubricant Available
1986/02/01

Valve Lash Adjustment Interval Is Changed
1986/07/01

Black Painted Valve Covers Available{1107}
1994/12/01

Finding Top Dead Center (TDC) For Setting Valve Lash{0374}
1995/06/01

New Jake Brake Factory Setting{1119}
1995/07/01

New Indication Of Upper End Check{1102,1290}
1995/08/01

New Valve Cover Group Includes "Low Profile" Breather{1107,1317}
1995/09/01

New Jake Brake Factory Setting{1119}
1995/09/01

Improvements To Camshafts, Unit Injector Rocker Arms, And Valve Rocker Arms{1123,1210}
1996/03/27

New Torque Specification For Injector Rocker Arm Adjustment Lock Nut{1123}
1996/10/01

Jake Brake Settings For The 3406E Truck Engines {1119}
1999/05/01

Engine News

Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25

5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29

Tolerance Added To Valve Clearance Specifications
1978/01/18

Use Again Specifications For Valve Springs Are Changed
1978/03/01

Special Instruction

Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}

Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}

Service Letter-NACD

164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Valve Mechanism Cover
3406E Truck Engine

Valve Mechanism
3406E Truck Engine

Electronic Unit Injector Rocker Arm
3406E Truck Engine

Rocker Shaft
3406E Truck Engine

Service Letter-China

164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock

Service Letter-Asia

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock

Disassembly and Assembly

Valve Mechanism Cover - Remove and Install
3406E Engine

Valve Mechanism Cover Base - Remove and Install
3406E Engine

Compression Brake - Remove - If Equipped
3406E Engine

Compression Brake - Install - If Equipped
3406E Engine

Rocker Arm and Shaft - Install
3406E Engine

Rocker Arm and Shaft - Remove
3406E Engine

Service Magazine

Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17

Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30

Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30

Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07

Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04

124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09

HOUSING GP-REAR

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

DRIVE GP-ALTERNATOR

Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

USD $8,785

2000 CAT 3406E

Transgear Truck Supplies