AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406E Truck Engine 5EK00001-01820 FUEL SYSTEM Caterpillar SIS



TRUCK ENGINE 3406E TRUCK ENGINE 5EK
 3406E Truck Engine 5EK00001-01820 SEBP2186 3406E 5EK   (1993)

Parts group 3406E:

  For full view, you need register
FUEL SYSTEM
FILTER GP-FUEL
COVER GP-FUEL FILTER BASE
118-4490 COVER GP-FUEL FILTER BASE
118-4490 COVER GP-FUEL FILTER BASE
PART OF 118-4489 PUMP GP-FUEL PRIMING
AN ATTACHMENT
FILTER GP-FUEL
121-9268 FILTER GP-FUEL
121-9268 FILTER GP-FUEL
DOES NOT PROVIDE A FUEL PRIMING PUMP
AN ATTACHMENT
FILTER GP-FUEL
6I-3949 FILTER GP-FUEL
6I-3949 FILTER GP-FUEL
PROVIDES NO FUEL TEMPERATURE SENSOR
FOR USE WITH STANDARD ECM
PUMP GP-FUEL PRM & PRIM FILTER
117-8930 PUMP GP-FUEL PRM & PRIM FILTER
117-8930 PUMP GP-FUEL PRM & PRIM FILTER
CANNOT BE USED WITH @@@@@ 6I-3949@@@@@, @@@@@113-4695@@@@@
AN ATTACHMENT
VALVE GP-CHECK
102-7535 VALVE GP-CHECK
102-7535 VALVE GP-CHECK
PART OF 101-3122, 103-4700, 103-4702, 108-8749, 108-8750, 108-8752, 109-9982, 113-4697, 114-4684, 114-7411, 117-4746 LINES GP-FUEL
ALSO AN ATTACHMENT
VALVE GP-CHECK
139-2358 VALVE GP-CHECK
139-2358 VALVE GP-CHECK
PART OF 114-4405 LINES GP-FUEL
AN ATTACHMENT
FITTING GP-FUEL
FITTING GP-QUICK DISCONNECT
108-2312 FITTING GP-QUICK DISCONNECT
108-2312 FITTING GP-QUICK DISCONNECT
ALSO AN ATTACHMENT
FUEL SYSTEM GP
437-8112 KIT-FUEL SYSTEM GASKET
437-8112 KIT-FUEL SYSTEM GASKET
304.8 X 228.6 X 38.1 MM. CLASSIC
FIELD INSTALLATION
KIT-FUEL SYSTEM PARTS
248-1394 KIT-INJECTOR
248-1394 KIT-INJECTOR
FIELD INSTALLATION
LINES GP-FUEL
FASTENER GP-FUEL LINES
109-9992 FASTENER GP-FUEL LINES
109-9992 FASTENER GP-FUEL LINES
AN ATTACHMENT
FASTENER GP-FUEL LINES
109-9993 FASTENER GP-FUEL LINES
109-9993 FASTENER GP-FUEL LINES
AN ATTACHMENT
FITTING GP-FUEL LINES
108-2314 FITTING GP-FUEL LINES
108-2314 FITTING GP-FUEL LINES
5/8-18 X 45 DEGREE FLARE FUEL RETURN CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
108-8756 FITTING GP-FUEL LINES
108-8756 FITTING GP-FUEL LINES
3/4-16 X 45 DEGREE STRAIGHT CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
109-2786 FITTING GP-FUEL LINES
109-2786 FITTING GP-FUEL LINES
5/8-18 X 45 DEGREE CONNECTOR-90 DEGREE ELBOW
AN ATTACHMENT
FITTING GP-FUEL LINES
120-6725 FITTING GP-FUEL LINES
120-6725 FITTING GP-FUEL LINES
3/4-16 X 45 DEGREE FLARE-90 DEGREE ELBOW FUEL RETURN CONNECTOR
AN ATTACHMENT
FITTING GP-QUICK DISCONNECT
108-2312 FITTING GP-QUICK DISCONNECT
108-2312 FITTING GP-QUICK DISCONNECT
ALSO AN ATTACHMENT
LINES GP-FUEL
101-3122 LINES GP-FUEL
101-3122 LINES GP-FUEL
ALSO AN ATTACHMENT
LINES GP-FUEL
103-4700 LINES GP-FUEL
103-4700 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
103-4702 LINES GP-FUEL
103-4702 LINES GP-FUEL
Type 1
AN ATTACHMENT
LINES GP-FUEL
103-4702 LINES GP-FUEL
103-4702 LINES GP-FUEL
Type 2
AN ATTACHMENT
LINES GP-FUEL
108-8749 LINES GP-FUEL
108-8749 LINES GP-FUEL
LINES GP-FUEL
108-8750 LINES GP-FUEL
108-8750 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
108-8752 LINES GP-FUEL
108-8752 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
109-9982 LINES GP-FUEL
109-9982 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
113-4697 LINES GP-FUEL
113-4697 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
114-4405 LINES GP-FUEL
114-4405 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
114-4684 LINES GP-FUEL
114-4684 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
114-7411 LINES GP-FUEL
114-7411 LINES GP-FUEL
AN ATTACHMENT
LINES GP-FUEL
117-4746 LINES GP-FUEL
117-4746 LINES GP-FUEL
AN ATTACHMENT
PLUG GP-FUEL LINES
108-8757 PLUG GP-FUEL LINES
108-8757 PLUG GP-FUEL LINES
FUEL BLEED
ALSO AN ATTACHMENT
PLUG GP-FUEL LINES
113-8485 PLUG GP-FUEL LINES
113-8485 PLUG GP-FUEL LINES
FUEL RETURN, FUEL BLEED
AN ATTACHMENT
LINES GP-FUEL INJECTION
INJECTOR GP-FUEL
102-2014 INJECTOR GP-FUEL
102-2014 INJECTOR GP-FUEL
PART OF 6I-3024 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
102-6230 INJECTOR GP-FUEL
102-6230 INJECTOR GP-FUEL
S/N 5EK1-1184
PART OF 4P-5412 PUMP GP-FUEL INJECTION
FIELD REPLACEMENT ORDER @@@@@117-1148@@@@@
INJECTOR GP-FUEL
103-4562 INJECTOR GP-FUEL
103-4562 INJECTOR GP-FUEL
PART OF 6I-3897 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
109-5021 INJECTOR GP-FUEL
109-5021 INJECTOR GP-FUEL
S/N 5EK1185-1820
PART OF 4P-5412 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
109-5038 INJECTOR GP-FUEL
109-5038 INJECTOR GP-FUEL
PART OF 110-4122 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
INJECTOR GP-FUEL
117-1148 INJECTOR GP-FUEL
117-1148 INJECTOR GP-FUEL
FIELD REPLACEMENT FOR @@@@@102-6230@@@@@
FIELD INSTALLATION
INJECTOR GP-FUEL
118-9035 INJECTOR GP-FUEL
118-9035 INJECTOR GP-FUEL
PART OF 118-2489 PUMP GP-FUEL INJECTION
AN ATTACHMENT
INJECTOR GP-FUEL
211-3021 INJECTOR GP-FUEL
211-3021 INJECTOR GP-FUEL
FOR USE WITH LOW SULFUR FUELS
FIELD INSTALLATION
PUMP GP-FUEL INJECTION
SLEEVE GP-INJECTOR
115-2324 SLEEVE GP-INJECTOR
115-2324 SLEEVE GP-INJECTOR
PART OF 161-6190 CYLINDER HEAD AS
INJECTOR GP-FUEL
102-2014 INJECTOR GP-FUEL
102-2014 INJECTOR GP-FUEL
PART OF 6I-3024 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
102-6230 INJECTOR GP-FUEL
102-6230 INJECTOR GP-FUEL
S/N 5EK1-1184
PART OF 4P-5412 PUMP GP-FUEL INJECTION
FIELD REPLACEMENT ORDER @@@@@117-1148@@@@@
INJECTOR GP-FUEL
103-4562 INJECTOR GP-FUEL
103-4562 INJECTOR GP-FUEL
PART OF 6I-3897 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
109-5021 INJECTOR GP-FUEL
109-5021 INJECTOR GP-FUEL
S/N 5EK1185-1820
PART OF 4P-5412 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
109-5038 INJECTOR GP-FUEL
109-5038 INJECTOR GP-FUEL
PART OF 110-4122 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
INJECTOR GP-FUEL
117-1148 INJECTOR GP-FUEL
117-1148 INJECTOR GP-FUEL
FIELD REPLACEMENT FOR @@@@@102-6230@@@@@
FIELD INSTALLATION
INJECTOR GP-FUEL
118-9035 INJECTOR GP-FUEL
118-9035 INJECTOR GP-FUEL
PART OF 118-2489 PUMP GP-FUEL INJECTION
AN ATTACHMENT
INJECTOR GP-FUEL
211-3021 INJECTOR GP-FUEL
211-3021 INJECTOR GP-FUEL
FOR USE WITH LOW SULFUR FUELS
FIELD INSTALLATION
PUMP GP-FUEL INJECTION
110-4122 PUMP GP-FUEL INJECTION
110-4122 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
PUMP GP-FUEL INJECTION
118-2489 PUMP GP-FUEL INJECTION
118-2489 PUMP GP-FUEL INJECTION
AN ATTACHMENT
PUMP GP-FUEL INJECTION
4P-5412 PUMP GP-FUEL INJECTION
4P-5412 PUMP GP-FUEL INJECTION
Type 1
PUMP GP-FUEL INJECTION
4P-5412 PUMP GP-FUEL INJECTION
4P-5412 PUMP GP-FUEL INJECTION
Type 2
PUMP GP-FUEL INJECTION
6I-3024 PUMP GP-FUEL INJECTION
6I-3024 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-3897 PUMP GP-FUEL INJECTION
6I-3897 PUMP GP-FUEL INJECTION
WIRING GP-UNIT INJECTOR
4P-5414 WIRING GP-UNIT INJECTOR
4P-5414 WIRING GP-UNIT INJECTOR
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
113-4695 PUMP GP-FUEL PRIMING
113-4695 PUMP GP-FUEL PRIMING
FOR USE WITH 4 CYLINDER AIR COMPRESSORS
AN ATTACHMENT
PUMP GP-FUEL PRIMING
118-4489 PUMP GP-FUEL PRIMING
118-4489 PUMP GP-FUEL PRIMING
FOR USE WITH REMOTE MOUNTED FUEL FILTER
CANNOT BE USED WITH @@@@@ 6I-3949@@@@@, @@@@@113-4695@@@@@, @@@@@117-8930@@@@@
AN ATTACHMENT
PUMP GP-FUEL PRM & PRIM FILTER
117-8930 PUMP GP-FUEL PRM & PRIM FILTER
117-8930 PUMP GP-FUEL PRM & PRIM FILTER
CANNOT BE USED WITH @@@@@ 6I-3949@@@@@, @@@@@113-4695@@@@@
AN ATTACHMENT
PUMP GP-FUEL TRANSFER
FITTING GP-QUICK DISCONNECT
108-2312 FITTING GP-QUICK DISCONNECT
108-2312 FITTING GP-QUICK DISCONNECT
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
100-4265 PUMP GP-FUEL TRANSFER
100-4265 PUMP GP-FUEL TRANSFER
FOR USE WITH FRONT MOUNTED POWER STEERING PUMP
AN ATTACHMENT
PUMP GP-FUEL TRANSFER
126-5954 PUMP GP-FUEL TRANSFER
126-5954 PUMP GP-FUEL TRANSFER
FRONT MOUNTED INLET TRANSFER PUMP WITH INLET PORT ON THE END
AN ATTACHMENT
PUMP GP-FUEL TRANSFER
6I-0931 PUMP GP-FUEL TRANSFER
6I-0931 PUMP GP-FUEL TRANSFER
FRONT MOUNTED
ALSO AN ATTACHMENT

Information:

(For parts list, see above)

Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Truck Engine News
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/31
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Truck Engine News
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/31
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Cat® Reman Announces a New Fuel Ratio Control Option for Certain Truck Engines {1278}
2014/09/05
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Truck Engine News
Gasket Leakage On Aftermarket Fuel Filters
1985/12/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
New Fuel Priming Pump And Gasket Used{1258}
1994/09/01
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies{1261}
1997/11/18
Troubleshooting Reminder For Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/09/01
A New Check Valve is Available for the Fuel Filter Base {1262}
2003/06/01
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Specifications
Fuel Filter Base
3406E Truck Engine
Fuel Filter (Primary)
3406E Truck Engine
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base - Remove and Install
3406E Engine
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Technical Information Bulletin
Rough Low Idle Issues on 3406E and C-15 Engines{1250, 1251, 1254, 1290}
Rough Low Idle Issues on 3406E and C-15 Engines{1250, 1251, 1254, 1290}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Fuel System Pressure{1256}
1994/11/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
New Check Valve Group Used In Fuel Manifold And New Fuel Transfer Pumps Provide Increased Fuel Pressure{1256,1274}
1997/10/20
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Fuel Injection Pump Improvements{1251}
1994/02/07
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Truck Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1985/12/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Use Only Clean Engine Oil To Lubricate Unit Injector O-Rings{1290}
1994/08/30
Unit Injector Removal And Installation{1290}
1994/11/01
Electronic Unit Injector (EUI) Replacement{1290}
1995/01/01
Handling Electronic Unit Injectors (EUI){1290}
1995/04/01
New Indication Of Upper End Check{1102,1290}
1995/08/01
Possible Interference Between Electronic Unit Injector (EUI) Spring And 9U-7227 Injector Height Setting Gauge Assembly{1290}
1995/08/01
Use Care To Help Prevent Electronic Unit Injector (EUI) Tip Damage{1290}
1995/08/01
Electronic Unit Injectors (EUI's) With Loose Or Missing Screens{1290}
1995/09/01
Shutoff Valve In Fuel Return Lines{1274,1279}
1995/10/01
Injector Sleeve Tooling Modification{0701,0706}
1995/10/01
Software Update May Be Required When Changing Fuel Injectors {1900,1902,1290}
1995/12/15
Improvements To Camshafts, Unit Injector Rocker Arms, And Valve Rocker Arms{1123,1210}
1996/03/27
Procedure To Investigate Misfires On Engines Equipped With Electronic Unit Injectors (EUI){1290}
1997/05/27
New Check Valve Group Used In Fuel Manifold And New Fuel Transfer Pumps Provide Increased Fuel Pressure{1256,1274}
1997/10/20
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Letter-Australia
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Letter-CFEL
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Letter-CSARL
Service Letter-Americas
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Letter-Truck/Ag/Marine
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Letter-China
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Letter-Asia
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Letter-APD
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Product Support Program For Routing Fuel Flow Hoses And Flashing The ECM With Updated Software On Certain 3406E Engines Rated At 410 Horsepower And Below
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Truck Engine News
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Use Only Clean Engine Oil To Lubricate Unit Injector O-Rings{1290}
1994/08/30
Unit Injector Removal And Installation{1290}
1994/11/01
Electronic Unit Injector (EUI) Replacement{1290}
1995/01/01
Handling Electronic Unit Injectors (EUI){1290}
1995/04/01
New Indication Of Upper End Check{1102,1290}
1995/08/01
Possible Interference Between Electronic Unit Injector (EUI) Spring And 9U-7227 Injector Height Setting Gauge Assembly{1290}
1995/08/01
Use Care To Help Prevent Electronic Unit Injector (EUI) Tip Damage{1290}
1995/08/01
Electronic Unit Injectors (EUI's) With Loose Or Missing Screens{1290}
1995/09/01
Injector Sleeve Tooling Modification{0701,0706}
1995/10/01
Software Update May Be Required When Changing Fuel Injectors {1900,1902,1290}
1995/12/15
Improvements To Camshafts, Unit Injector Rocker Arms, And Valve Rocker Arms{1123,1210}
1996/03/27
Procedure To Investigate Misfires On Engines Equipped With Electronic Unit Injectors (EUI){1290}
1997/05/27
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/05/01
New O-Ring Seals For Unit Injector Sleeves {1125}
1999/03/01
EPA Required Low NOx Rebuild Kits On Overhauled Engines{1290}
1999/11/01
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1290, 7569}
2006/02/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2007/07/01
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Service Letter-Australia
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
Service Letter-CFEL
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
Service Letter-Americas
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Service Letter-China
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
Service Letter-Asia
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN ELECTRONIC UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN ELECTRONIC UNIT FUEL INJECTORS
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Truck Engine News
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Truck Engine News
Use Only EPA-Approved Rack And Idle Setting; Change Seal, Data Plate
1981/09/23
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/09/01
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/31
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1985/12/01
Fuel Sulfur Analyzer Available
1986/01/01
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Engine Timing Indicator Group Available
1986/07/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals
1986/11/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Use Only Clean Engine Oil To Lubricate Unit Injector O-Rings{1290}
1994/08/30
New Fuel Priming Pump And Gasket Used{1258}
1994/09/01
Electronic Unit Injector (EUI) Replacement{1290}
1995/01/01
Description Of January 1995 (JAN95) Personality Module Changes {1902}
1995/01/01
Handling Electronic Unit Injectors (EUI){1290}
1995/04/01
Corrupted Fleet Trip Data{1900}
1996/01/23
Basic Electronic Troubleshooting Guide Is Now Available{1900}
1996/01/23
New &quot;Fuel System Reuse And Salvage Guides&quot; Reference Manual Available{1250}
1997/04/01
Lubricity Limit Added To Preferred Distillate Fuel Recommendation{1280}
1997/08/01
The Procedure For Tightening The Clamping Bolt For The Unit Injector Has Changed {1250, 1290}
2002/10/01
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/01
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Letter-NACD
The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines
The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Service Letter-Truck/Ag/Marine
The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines
The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Product Support Program For Updating The Electronic Control Group (Personality Module) On Certain 3176B And 3406E Truck Engines
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
New 8T2998 Lubricant Available
1986/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Use Only Clean Engine Oil To Lubricate Unit Injector O-Rings{1290}
1994/08/30
Fuel System Pressure{1256}
1994/11/01
Unit Injector Removal And Installation{1290}
1994/11/01
Electronic Unit Injector (EUI) Replacement{1290}
1995/01/01
Handling Electronic Unit Injectors (EUI){1290}
1995/04/01
New Indication Of Upper End Check{1102,1290}
1995/08/01
Possible Interference Between Electronic Unit Injector (EUI) Spring And 9U-7227 Injector Height Setting Gauge Assembly{1290}
1995/08/01
Use Care To Help Prevent Electronic Unit Injector (EUI) Tip Damage{1290}
1995/08/01
Electronic Unit Injectors (EUI's) With Loose Or Missing Screens{1290}
1995/09/01
Injector Sleeve Tooling Modification{0701,0706}
1995/10/01
Software Update May Be Required When Changing Fuel Injectors {1900,1902,1290}
1995/12/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Improvements To Camshafts, Unit Injector Rocker Arms, And Valve Rocker Arms{1123,1210}
1996/03/27
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Procedure To Investigate Misfires On Engines Equipped With Electronic Unit Injectors (EUI){1290}
1997/05/27
New Check Valve Group Used In Fuel Manifold And New Fuel Transfer Pumps Provide Increased Fuel Pressure{1256,1274}
1997/10/20
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/05/01
New O-Ring Seals For Unit Injector Sleeves {1125}
1999/03/01
EPA Required Low NOx Rebuild Kits On Overhauled Engines{1290}
1999/11/01
Torque Increased for Nuts on Fuel Injector Wiring Harness {1290}
1999/12/01
New Unit Injector Sleeves and O-ring Seals Are Now Available {1290}
2001/07/01
Change to the Torque of the Adjusting Screw Locknut for the Unit Injector (Testing and Adjusting Manuals) {1290}
2001/06/01
Internal Components for Remanufactured Injectors are Now Coated for Increased Service Life {1290}
2004/08/01
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1290, 7569}
2006/02/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2007/07/01
Do not Use the 6V-4022 Fuel Injector Tester to Check Unit Injectors for Leaks {0782, 1251, 1254, 1290, 1713}
2008/11/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
3406E and C-15 Low Idle Instability {1251, 1254, 1290, 1713}
2009/10/29
Improvements Have Been Made to Remanufactured Fuel Injectors on C15 and 3406E Engines {1251, 1290}
2010/05/31
Cat<SUP>&reg;</SUP> Reman Is Announcing an Appearance Change to the EI550 Classic, Bridge, and ACERT Electronic Unit Injectors for Certain Truck Engines {1290}
2015/06/26
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Australia
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-CFEL
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-CSARL
Service Letter-Americas
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Truck/Ag/Marine
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Rough Low Idle Issues on 3406E and C-15 Engines{1250, 1251, 1254, 1290}
Rough Low Idle Issues on 3406E and C-15 Engines{1250, 1251, 1254, 1290}
Broken Tappet Springs on the 3406E, 3456, C-15, C-16, C-18, and C32Engines{1290}
Broken Tappet Springs on the 3406E, 3456, C-15, C-16, C-18, and C32Engines{1290}
Specifications
Electronic Unit Injector Mechanism
3406E Truck Engine
Service Letter-China
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Asia
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN ELECTRONIC UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN ELECTRONIC UNIT FUEL INJECTORS
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Replacing The Unit Injector Body &amp; Sleeve Seal O-Rings On Certain 3406E Truck Engines
Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Disassembly and Assembly
Electronic Unit Injector - Remove
3406E Engine
Electronic Unit Injector - Install
3406E Engine
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08
Truck Engine News
New Fuel Priming Pump And Gasket Used{1258}
1994/09/01
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Disassembly and Assembly
Fuel Priming Pump - Remove and Install
3406E Engine
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Fuel System Pressure{1256}
1994/11/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
New Check Valve Group Used In Fuel Manifold And New Fuel Transfer Pumps Provide Increased Fuel Pressure{1256,1274}
1997/10/20
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Fuel Transfer Pump
3406E Truck Engine
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Disassembly and Assembly
Fuel Transfer Pump - Remove
3406E Engine
Fuel Transfer Pump - Install
3406E Engine
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Fuel Injection Pump Improvements{1251}
1994/02/07
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Truck Engine News
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Injector Sleeve Tooling Modification{0701,0706}
1995/10/01
Engine News
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25
Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions
1980/05/14
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1700 Communication Adapter Group{0781, 0782}
Using the 7X1700 Communication Adapter Group{0781, 0782}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Improved Electronic Tool Group (Communication Adapter) Supports Flash Memory Downloading{1900}
1993/08/09
Service Tools For Electronic Controls {0781,0782}
1994/04/25
9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27
Special Instruction
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

Truck sale:

2000 CAT 3406E
USD $8,785 
2000 CAT 3406E

Transgear Truck Supplies
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.