125-0835 CYLINDER BLOCK AS PART OF 125-0512 CYLINDER BLOCK GP 3406E TRUCK ENGINE

BASIC ENGINE

CYLINDER BLOCK GP

0. 125-0835 CYLINDER B
1. 107-2232 CYLINDER B
2. 107-2232 CYLINDER B
3. 108-2111 CYLINDER B
4. 112-9058 CYLINDER B
5. 125-0512 CYLINDER B
6. 4P-5401 CYLINDER B
7. 4P-5401 CYLINDER B
8. 4P-5401 CYLINDER B

CYLINDER HEAD GP

9. 161-6190 CYLINDER H
0. INFORMATION

TRUCK ENGINE 3406E TRUCK ENGINE 5EK
3406E Truck Engine 5EK00001-01820 SEBP2186 3406E 5EK (1993)

BASIC ENGINE

CYLINDER BLOCK GP

4P-5404 COVER GP-CYLINDER BLOCK

108-3919 CYLINDER BLOCK AS

125-0835 CYLINDER BLOCK AS

107-2232 CYLINDER BLOCK GP

108-2111 CYLINDER BLOCK GP

#SEBP21860160

125-0835: CYLINDER BLOCK AS

CYLINDER BLOCK AS

125-0835 CYLINDER BLOCK AS
PART OF 125-0512 CYLINDER BLOCK GP

i00520297 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
3.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
4.	4N-0795	[7]	CAP-CRANKSHAFT BEARING

#SEBP21860161

107-2232: CYLINDER BLOCK GP

CYLINDER BLOCK GP

107-2232 CYLINDER BLOCK GP
S/N 5EK1-1367
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

i00494320 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-3851	[6]	JET AS-PISTON COOLING
2.	4P-5442	[1]	CYLINDER BLOCK AS
3.	2W-6000	[6]	LINER-CYLINDER BLOCK
4.	3E-6777	[18]	SEAL-O-RING
5.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
6.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
7.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
8.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
9.	1S-9540	[1]	DOWEL
10.	5P-0840	[1]	SEAL-O-RING
11.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
12.	6I-1055	[1]	DOWEL
13.	2M-6471	[1]	PLUG-CUP
14.	4N-0683	[4]	DOWEL
15.	4N-1650	[1]	DOWEL
16.	6I-4421	[1]	PLATE-SPACER
17.	6I-4422	[1]	GASKET-PLATE
18.	8S-9094	[1]	PLUG-ORIFICE
19.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
20.	2M-9780	[1]	SEAL-O-RING
21.	8T-6767	[5]	PLUG-PIPE (3/8-18-THD)
22.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
23.	3E-7570	[1]	SENSOR GP-PRESSURE (OIL)
24.	3E-3367	[1]	PLUG AS-CONNECTOR
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8813	[1]	SEAL
25.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
26.	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
27.	9X-1813 BE		SLEEVE
28.	3B-7722	[1]	BUSHING-PIPE
29.	5N-2126	[1]	CONNECTOR (THERMOCOUPLE)
30.	6V-5048	[1]	SEAL-O-RING
31.	9S-4182	[1]	PLUG (7/16-20-THD)
32.	3J-7354	[1]	SEAL-O-RING
33.	100-7399	[1]	PLUG
34.	3E-6747	[1]	SEAL-O-RING
	7M-7456 B		COMPOUND-BEARING MOUNT (50-ML TUBE)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#SEBP21860162

107-2232: CYLINDER BLOCK GP

CYLINDER BLOCK GP

107-2232 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

i00494322 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-3851	[6]	JET AS-PISTON COOLING
2.	108-3919 Y	[1]	CYLINDER BLOCK AS
3.	5N-2126	[1]	CONNECTOR (THERMOCOUPLE)
4.	6V-5048	[1]	SEAL-O-RING
5.	9S-4182	[1]	PLUG (7/16-20-THD)
6.	9X-7378	[1]	SEAL-O-RING
7.	100-7399	[1]	PLUG
8.	3E-6747	[1]	SEAL-O-RING
9.	1S-9540	[1]	DOWEL
10.	5P-0840	[1]	SEAL-O-RING
11.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
12.	6I-1055	[1]	DOWEL
13.	2M-6471	[1]	PLUG-CUP
14.	4N-0683	[4]	DOWEL
15.	4N-1650	[1]	DOWEL
16.	6I-4421	[1]	PLATE-SPACER
17.	6I-4422	[1]	GASKET-PLATE
18.	8S-9094	[1]	PLUG-ORIFICE
19.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
20.	114-4427	[1]	SEAL-O-RING
21.	8T-6767	[5]	PLUG-PIPE (3/8-18-THD)
22.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
23.	3E-7570	[1]	SENSOR GP-PRESSURE (OIL)
24.	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8813	[1]	SEAL
25.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
26.	186-3736	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
27.	9X-1813 BE		SLEEVE
28.	3B-7722	[1]	BUSHING-PIPE
	7M-7456 B		COMPOUND-BEARING MOUNT (50-ML TUBE)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP21860163

108-2111: CYLINDER BLOCK GP

CYLINDER BLOCK GP

108-2111 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 4P-5401@@@@@, @@@@@107-2232@@@@@
FIELD INSTALLATION

i00480328 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6757	[1]	PLUG-PIPE
2.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
3.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
4.	2M-6471	[1]	PLUG-CUP
5.	8S-9094	[1]	PLUG-ORIFICE
6.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
7.	2M-9780	[1]	SEAL-O-RING
8.	8T-6767	[6]	PLUG-PIPE (3/8-18-THD)
9.	9S-4182	[1]	PLUG (7/16-20-THD)
10.	3J-7354	[1]	SEAL-O-RING
11.	100-7399	[1]	PLUG
12.	3E-6747	[1]	SEAL-O-RING
13.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
14.	4N-5857	[7]	CAP-CRANKSHAFT BEARING

#SEBP21860164

112-9058: CYLINDER BLOCK GP

CYLINDER BLOCK GP

112-9058 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@125-0512@@@@@

i00493941 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-3851	[6]	JET AS-PISTON COOLING
2.	108-3919 Y	[1]	CYLINDER BLOCK AS
3.	2W-6000	[6]	LINER-CYLINDER BLOCK
4.	3E-6777	[18]	SEAL-O-RING
5.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
6.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
7.		[14]	GUARD AS
8.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
9.	1S-9540	[1]	DOWEL
10.	5P-0840	[1]	SEAL-O-RING
11.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
12.	6I-1055	[1]	DOWEL
13.	2M-6471	[1]	PLUG-CUP
14.	4N-0683	[4]	DOWEL
15.	4N-1650	[1]	DOWEL
16.	6I-4421	[1]	PLATE-SPACER
17.	6I-4422	[1]	GASKET-PLATE
18.	8S-9094	[1]	PLUG-ORIFICE
19.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
20.	2M-9780	[1]	SEAL-O-RING
21.	8T-6767	[4]	PLUG-PIPE (3/8-18-THD)
22.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
23.	3E-7570	[1]	SENSOR GP-PRESSURE
24.	3E-3367	[1]	PLUG AS-CONNECTOR
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8813	[1]	SEAL
25.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
26.	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
27.	9X-1813 BE		SLEEVE
28.	3B-7722	[1]	BUSHING-PIPE
29.	5N-2126	[1]	CONNECTOR (THERMOCOUPLE)
30.	6V-5048	[1]	SEAL-O-RING
31.	9S-4182	[1]	PLUG (7/16-20-THD)
32.	3J-7354	[1]	SEAL-O-RING
33.	100-7399	[1]	PLUG
34.	3E-6747	[1]	SEAL-O-RING
	7M-7456 B		COMPOUND-BEARING MOUNT (50-ML TUBE)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP21860165

125-0512: CYLINDER BLOCK GP

CYLINDER BLOCK GP

125-0512 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@107-2232@@@@@, @@@@@112-9058@@@@@
FIELD INSTALLATION

i00520150 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6757	[1]	PLUG-PIPE
2.	125-0835 Y	[1]	CYLINDER BLOCK AS
3.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
4.	2M-6471	[1]	PLUG-CUP
5.	8S-9094	[1]	PLUG-ORIFICE
6.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
7.	114-4427	[1]	SEAL-O-RING
8.	8T-6767	[6]	PLUG-PIPE (3/8-18-THD)
9.	9S-4182	[1]	PLUG (7/16-20-THD)
10.	9X-7378	[1]	SEAL-O-RING
11.	100-7399	[1]	PLUG
12.	3E-6747	[1]	SEAL-O-RING
	Y		SEPARATE ILLUSTRATION

#SEBP21860166

4P-5401: CYLINDER BLOCK GP

CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP
Type 1
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

i00384036 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-4990	[6]	JET AS-PISTON COOLING
2.	4P-5442	[1]	CYLINDER BLOCK AS
3.	2W-6000	[6]	LINER-CYLINDER BLOCK
4.	3E-6777	[18]	SEAL-O-RING
5.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
6.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
7.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
8.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
9.	1S-9540	[1]	DOWEL
10.	5P-0840	[1]	SEAL-O-RING
11.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
12.	6I-1055	[1]	DOWEL
13.	2M-6471	[1]	PLUG-CUP
14.	4N-0683	[4]	DOWEL
15.	4N-1650	[1]	DOWEL
16.	6I-4421	[1]	PLATE-SPACER
17.	6I-4422	[1]	GASKET-PLATE
18.	8S-9094	[1]	PLUG-ORIFICE
19.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
20.	2M-9780	[1]	SEAL-O-RING
21.	8T-6767	[5]	PLUG-PIPE (3/8-18-THD)
22.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
23.	3E-7570	[1]	SENSOR GP-PRESSURE
24.	3E-3367	[1]	PLUG AS-CONNECTOR
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8813	[1]	SEAL
25.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
26.	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
27.	9X-1813 BE		SLEEVE
28.	3B-7722	[1]	BUSHING-PIPE
29.	5N-2126	[1]	CONNECTOR (THERMOCOUPLE)
30.	6V-5048	[1]	SEAL-O-RING
31.	9S-4182	[1]	PLUG (7/16-20-THD)
32.	3J-7354	[1]	SEAL-O-RING
33.	100-7399	[1]	PLUG
34.	3E-6747	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#SEBP21860167

4P-5401: CYLINDER BLOCK GP

CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP
Type 2
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

i00384037 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-4990	[6]	JET AS-PISTON COOLING
2.	108-3919 C	[1]	CYLINDER BLOCK AS
3.	2W-6000	[6]	LINER-CYLINDER BLOCK
4.	3E-6777	[18]	SEAL-O-RING
5.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
6.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
7.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
8.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
9.	1S-9540	[1]	DOWEL
10.	5P-0840	[1]	SEAL-O-RING
11.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
12.	6I-1055	[1]	DOWEL
13.	2M-6471	[1]	PLUG-CUP
14.	4N-0683	[4]	DOWEL
15.	4N-1650	[1]	DOWEL
16.	6I-4421	[1]	PLATE-SPACER
17.	6I-4422	[1]	GASKET-PLATE
18.	8S-9094	[1]	PLUG-ORIFICE
19.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
20.	2M-9780	[1]	SEAL-O-RING
21.	8T-6767	[5]	PLUG-PIPE (3/8-18-THD)
22.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
23.	3E-7570	[1]	SENSOR GP-PRESSURE
24.	3E-3367	[1]	PLUG AS-CONNECTOR
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8813	[1]	SEAL
25.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
26.	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
27.	9X-1813 BE		SLEEVE
28.	3B-7722	[1]	BUSHING-PIPE
29.	5N-2126	[1]	CONNECTOR (THERMOCOUPLE)
30.	6V-5048	[1]	SEAL-O-RING
31.	9S-4182	[1]	PLUG (7/16-20-THD)
32.	3J-7354	[1]	SEAL-O-RING
33.	100-7399	[1]	PLUG
34.	3E-6747	[1]	SEAL-O-RING
	7M-7456 B		COMPOUND-BEARING MOUNT (50-ML TUBE)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#SEBP21860168

4P-5401: CYLINDER BLOCK GP

CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP
S/N 5EK1647-1820
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@

i00384039 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-4990	[6]	JET AS-PISTON COOLING
2.	111-7168 C	[1]	CYLINDER BLOCK AS
3.	2W-6000	[6]	LINER-CYLINDER BLOCK
4.	110-2220	[18]	SEAL-LINER
5.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
6.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
7.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
8.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
9.	1S-9540	[1]	DOWEL
10.	5P-0840	[1]	SEAL-O-RING
11.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
12.	6I-1055	[1]	DOWEL
13.	2M-6471	[1]	PLUG-CUP
14.	4N-0683	[4]	DOWEL
15.	4N-1650	[1]	DOWEL
16.	6I-4421	[1]	PLATE-SPACER
17.	6I-4422	[1]	GASKET-PLATE
18.	8S-9094	[1]	PLUG-ORIFICE
19.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
20.	114-4427 C	[1]	SEAL-O-RING
21.	8T-6767	[5]	PLUG-PIPE (3/8-18-THD)
22.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
23.	3E-7570	[1]	SENSOR GP-PRESSURE
24.	3E-3367	[1]	PLUG AS-CONNECTOR
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8813	[1]	SEAL
25.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
26.	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
27.	9X-1813 BE		SLEEVE
28.	3B-7722	[1]	BUSHING-PIPE
29.	5N-2126	[1]	CONNECTOR (THERMOCOUPLE)
30.	6V-5048	[1]	SEAL-O-RING
31.	9S-4182	[1]	PLUG (7/16-20-THD)
32.	9X-7378 C	[1]	SEAL-O-RING
33.	100-7399	[1]	PLUG
34.	3E-6747	[1]	SEAL-O-RING
	7M-7456 B		COMPOUND-BEARING MOUNT (50-ML TUBE)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#SEBP21860169

161-6190: CYLINDER HEAD AS

CYLINDER HEAD AS

161-6190 CYLINDER HEAD AS
PART OF 161-6191 CYLINDER HEAD GP

i00862753 SEBP2186

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	8T-6757	[3]	PLUG-PIPE
3.	175-3617	[12]	INSERT-VALVE SEAT (INLET)
4.	152-7582	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	167-0642 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)(EXHAUST)
	170-4737 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)(EXHAUST)
5.	216-5582	[7]	BUSHING
	217-0751 AB		BUSHING (0.25-MM OS)
6.	115-2324 Y	[6]	SLEEVE GP-INJECTOR
7.	3B-0645	[20]	PLUG-CUP
8.	3B-0623	[17]	PLUG-CUP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

Inspection Marks On Bearings
1982/05/19

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08

Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08

New Liner Seat Insert Available
1983/08/31

New Cylinder Liner Available
1986/02/01

Cylinder Pack Puller Groups Improved
1992/12/01

Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01

Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/01

New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01

New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26

New Spacer Plate Gasket Helps Prevent Oil Leaks{1221}
1996/06/24

New Spacer Plate Gasket Helps Prevent Oil Leaks{1221}
1996/07/30

Use Two Piece Ferrous Articulated Pistons Instead Of Aluminum Pistons {1214,1331}
1996/09/01

Improved Plate Gasket Used In Cylinder Block Groups{1221}
1997/10/20

The Cylinder Liners Have a New Appearance {1216}
2005/03/01

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18

New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03

Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05

Change In Procedure To Check Main Bearing Clearance
1978/08/30

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE SPACER PLATE ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE SPACER PLATE ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Technical Information Bulletin

Liner Flange Breakage
Liner Flange Breakage

Specifications

Cylinder Block
3406E Truck Engine

Main Bearing Journal
3406E Truck Engine

Cylinder Liner
3406E Truck Engine

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Testing and Adjusting

Basic Block
3406E Truck Engines

Disassembly and Assembly

Bearing Clearance - Check
3406E Engine

Crankshaft Main Bearings - Remove
3406E Engine

Cylinder Liner - Remove
3406E Engine

Piston Cooling Jets - Remove and Install
3406E Engine

Camshaft Bearings - Remove
3406E Engine

Camshaft Bearings - Install
3406E Engine

Cylinder Liner - Install
3406E Engine

Crankshaft Main Bearings - Install
3406E Engine

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

New Liner Seat Insert Available{1217}
1983/08/15

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Cylinder Block Groups Used{1201}
1984/10/01

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

New Cylinder Liner Available{1201}
1986/02/10

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

Caterpillar Parts SIS Catalog 3406E :

108-3919 CYLINDER BLOCK AS

6I-1001 CRANKSHAFT GP

6I-4684 COVER GP-VALVE MECHANISM

6I-4683 COVER GP-VALVE MECHANISM

6I-4424 COVER GP-VALVE MECHANISM

107-2232 CYLINDER BLOCK GP

108-2111 CYLINDER BLOCK GP

112-9058 CYLINDER BLOCK GP

125-0512 CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP

Truck sale:

USD $8,785

2000 CAT 3406E

Transgear Truck Supplies