161-6191 CYLINDER HEAD GP PART OF 4P-5050 CYLINDER HEAD GP 3406E TRUCK ENGINE



BASIC ENGINE
CYLINDER HEAD GP
CYLINDER BLOCK GP
DAMPER GP

TRUCK ENGINE 3406E TRUCK ENGINE 5EK
 3406E Truck Engine 5EK00001-01820 SEBP2186 3406E 5EK   (1993)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
161-6190 CYLINDER HEAD AS
CYLINDER HEAD GP
161-6191 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-5050 CYLINDER HEAD GP
PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
SLEEVE GP-INJECTOR
115-2324 SLEEVE GP-INJECTOR
 

#SEBP21860170
 

161-6191: CYLINDER HEAD GP

161-6191 CYLINDER HEAD GP
PART OF 4P-5050 CYLINDER HEAD GP
i00862259 SEBP2186
1616191 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 161-6190 Y [1] CYLINDER HEAD AS  
2. 153-7023 [12] VALVE-INLET  
3. 153-7024 [12] VALVE-EXHAUST  
4. 6I-0928 [24] WASHER-SPECIAL  
5. 102-7665 [24] SPRING-VALVE  
6. 4P-4962 [24] ROTOCOIL AS  
7. 2A-4429 [48] LOCK-RETAINER  
8. 102-6229 [24] SEAL-VALVE STEM  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21860171
 

4P-5050: CYLINDER HEAD GP

4P-5050 CYLINDER HEAD GP
i00383910 SEBP2186
4P5050 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 BE SLEEVE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS. & WEDGE)
2. 111-2351 [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
  3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
  9X-1386 BE SLEEVE  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
3. 008-6817 [1] ELBOW  
4. 6I-4420 [1] GASKET-CYLINDER HEAD  
5. 161-6191 Y [1] CYLINDER HEAD GP  
6. 138-6756 [6] SLEEVE AS  
7. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 3E-6772 [24] SEAL (WATER)  
9. 124-1855 [16] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
10. 5H-1504 [26] WASHER-HARD (20X33.5X5-MM THK)  
11. 6V-5048 [1] SEAL-O-RING  
12. 6V-5049 [5] SEAL-O-RING  
13. 124-1854 [10] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
14. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
15. 8L-2786 [1] SEAL-O-RING  
16. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
17. 030-3978 [1] CONNECTOR  
18. 9S-8004 [3] PLUG (9/16-18-THD)  
19. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
20. 5P-0840 [1] SEAL-O-RING  
21. 9S-4191 [1] PLUG (9/16-18-THD)  
22. 3D-2824 [1] SEAL-O-RING  
23. 2P-8421 [1] ADAPTER-O-RING  
24. 100-5725 [1] STUD (3/8-16X1.25-IN)  
25. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
26. 2M-9780 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP21860172
 

0R-8913: CYLINDER PACK GP

0R-8913 CYLINDER PACK GP
PART OF 348-7339, 356-6807, 356-6810 PARTS GP-ENGINE OVERHAUL
i02682206 SEBP2186
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
  160-9874 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
  9L-5854 [1] BAND-FILLER (130.2-MM ID)  
  110-2220 [1] SEAL-LINER  
  142-6217 [1] SEAL-O-RING  
  142-7072 [1] SEAL-LINER  
  197-9322 [1] LINER-CYLINDER BLOCK  
  168-7246 [1] PIN-PISTON  
  7E-1177 [2] RETAINER-PIN  
  134-3761 [1] RING-PISTON (TOP)  
  144-5902 [1] RING-PISTON (INTERMEDIATE)  
  7N-7078 [1] RING-PISTON (OIL CONTROL)  
  0R-3780 [1] ROD AS-CONNECTING  
  6I-2726 [1] BUSHING  
  7E-4195 M [2] BOLT-CONNECTING ROD (M16X1.5X97-MM)  
  7N-2043 [2] DOWEL  
  M   METRIC PART
 

#SEBP21860173
 

104-6725: DAMPER & PULLEY GP

104-6725 DAMPER & PULLEY GP
AN ATTACHMENT
i00475202 SEBP2186
1046725 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. [1] PULLEY-CRANKSHAFT  
2. 108-4096 [1] DAMPER AS  
3. 1A-3203 [6] BOLT (5/8-18X4.75-IN)  
4. 4D-3704 [6] WASHER-HARD (17X30X5-MM THK)  
 

#SEBP21860174
 

4P-4291: DAMPER & PULLEY GP

4P-4291 DAMPER & PULLEY GP
S/N 5EK1-1743
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
i00554875 SEBP2186
4P4291 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 9N-0944 [1] PULLEY-CRANKSHAFT  
2. 167-8126 C [1] DAMPER AS  
3. 2A-2814 [6] BOLT (5/8-18X5.5-IN)  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21860175
 

4P-4292: DAMPER & PULLEY GP

4P-4292 DAMPER & PULLEY GP
8.5 IN DIA PULLEY
i00168554 SEBP2186
4P4292 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 167-8126 C [1] DAMPER AS  
2. 9N-0722 [1] PULLEY-CRANKSHAFT  
3. 2A-2814 [6] BOLT (5/8-18X5.5-IN)  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP21860176
 

4P-4293: DAMPER & PULLEY GP

4P-4293 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
i00376256 SEBP2186
4P4293 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 108-4096 C [1] DAMPER AS  
2. 2A-2814 [6] BOLT (5/8-18X5.5-IN)  
  4D-3704 [6] WASHER-HARD (17X30X5-MM THK)  
3. 4W-9605 [1] PULLEY-CRANKSHAFT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21860177
 

4P-4295: DAMPER & PULLEY GP

4P-4295 DAMPER & PULLEY GP
8.5 INCH DIAMETER
AN ATTACHMENT
i00376262 SEBP2186
4P4295 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 9N-0722 [1] PULLEY-CRANKSHAFT  
2. 108-4096 C [1] DAMPER AS  
3. 2B-6030 [6] BOLT (5/8-18X6-IN)  
4. 4D-3704 [6] WASHER-HARD (17X30X5-MM THK)  
5. 7C-6354 [1] SPACER (89.03X163.6X12.7-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21860178
 

4P-4296: DAMPER & PULLEY GP

4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
i00376266 SEBP2186
4P4296 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 4W-9605 [1] PULLEY-CRANKSHAFT  
2. 108-4096 C [1] DAMPER AS  
3. 2B-6030 [6] BOLT (5/8-18X6-IN)  
4. 4D-3704 [6] WASHER-HARD (17X30X5-MM THK)  
5. 7C-6354 [1] SPACER (89.03X163.6X12.7-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21860179
 

4P-7491: DAMPER & PULLEY GP

4P-7491 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
i00540272 SEBP2186
4P7491 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 4P-7490 [1] PULLEY-CRANKSHAFT  
2. 167-8126 [1] DAMPER AS  
3. 2B-6030 [6] BOLT (5/8-18X6-IN)  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
5. 7C-6354 [1] SPACER (89.03X163.6X12.7-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem "use Again " Specifications
1983/03/02
New Liner Seat Insert Available
1983/08/31
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
Additional Parts Now Provided With 0R-4180 Remanufactured Cylinder Head Assembly{1100}
1994/09/01
Inspection Of Valve Guide Seals{1104}
1995/07/01
New And Reconditioned Valve Projection Specifications{1105}
1995/08/01
New Intake And Exhaust Valves Have Chrome Plated Stems{1105}
1995/11/28
New Stronger Cylinder Head Bolts Used{1100}
1996/06/24
Be Sure To Order The Correct Remanufactured Cylinder Head For 3406E (5EK, 6TS) Truck Engines{1100}
1998/06/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01
New Unit Injector Sleeves and O-ring Seals Are Now Available {1290}
2000/08/01
Be Sure To Order The Correct Remanufactured Cylinder Head {1100}
2000/09/01
A New Head Gasket is Now Available as Service Replacement on Certain 3406E Engines {1124}
2006/02/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
2006/03/01
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
2014/03/05
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
A New Head Gasket Is Used On Certain Truck Engines {1100}
A New Head Gasket Is Used On Certain Truck Engines {1100}
New Cylinder Head Bolt Kit is Available for Certain C15 ACERT, C-15, C-16, and 3406E On-Highway Truck Engines {1100}
New Cylinder Head Bolt Kit is Available for Certain C15 ACERT, C-15, C-16, and 3406E On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
132-3904 Camshaft Retainer Holds Camshaft In Cylinder Head{1100}
1997/04/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Technical Information Bulletin
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Specifications
Cylinder Head
3406E Truck Engine
Cylinder Head Valves
3406E Truck Engine
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
LOWER COST C-15 & C15 ACERT REMAN CYLINDER HEAD OPTIONS
LOWER COST C-15 & C15 ACERT REMAN CYLINDER HEAD OPTIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
3406E Engine
Electronic Unit Injector Sleeve - Remove
3406E Engine
Camshaft Bearings - Remove
3406E Engine
Camshaft Bearings - Install
3406E Engine
Cylinder Head - Remove
3406E Engine
Inlet and Exhaust Valve Guides - Remove and Install
3406E Engine
Inlet and Exhaust Valves - Remove and Install
3406E Engine
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3406E Engine
Inlet and Exhaust Valve Seals - Remove and Install
3406E Engine
Inlet and Exhaust Valve Springs - Remove and Install
3406E Engine
Rocker Arm and Shaft - Install
3406E Engine
Rocker Arm and Shaft - Remove
3406E Engine
Cylinder Head - Install
3406E Engine
Cylinder Head - Install
3406E Engine
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09
9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27

Caterpillar Parts SIS Catalog 3406E :

CYLINDER HEAD AS
161-6190 CYLINDER HEAD AS
CYLINDER BLOCK GP
4P-5401 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-5401 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-5401 CYLINDER BLOCK GP
CYLINDER BLOCK GP
125-0512 CYLINDER BLOCK GP
CYLINDER BLOCK GP
112-9058 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-2111 CYLINDER BLOCK GP
CYLINDER BLOCK GP
107-2232 CYLINDER BLOCK GP
CYLINDER HEAD GP
4P-5050 CYLINDER HEAD GP
0R-8913 CYLINDER PACK GP
DAMPER & PULLEY GP
104-6725 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP

Truck sale:

2000 CAT 3406E
USD $8,785 
2000 CAT 3406E

Transgear Truck Supplies