FUEL SYSTEM
CONTROL GP-FUEL INJECTIONGOVERNOR GP
LINES GP-FUEL
FILTER GP-FUEL
FITTING GP-FUEL
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP-SHUTOFFWIRING GP
CONTROL GP-ELECTRONIC
FUEL SYSTEM
CONTROL GP-FUEL INJECTION
#SEBP21870110
105-1695: CONTROL GP-FUEL INJECTION
1051695 CONTROL GP-FUEL INJECTION
ENGINE S/N 98Z7747-UP
ENGINE S/N 98Z7747-UP
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-7459 | [1] | CONTROL AS | |
| 5C-8312 ZM | [6] | NUT (M4X0.7 THD) | ||
| 6V-5698 ZM | [4] | SCREW-BUTTON HEAD (M4X0.7X10MM) | ||
| 7X-7889 ZM | [5] | SETSCREW-SOCKET | ||
| 8C-4982 ZM | [7] | BOLT-SOCKET HEAD (M4X0.7X20 MM) | ||
| 8T-7564 Z | [2] | RING-RETAINING | ||
| 102-7455 ZM | [1] | SETSCREW | ||
| 2. | 6V-5683 M | [4] | BOLT (M6X1X16MM) | |
| M | METRIC PART | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP21870111
6I-3765: SUPPORT GP
6I3765 SUPPORT GP-CONTROL (GOVERNOR)
ENGINE S/N 98Z2619-UP
ENGINE S/N 98Z2619-UP
For full view, you need register
#SEBP21870112
9U-4435: LINES GP-FUEL
9U4435 LINES GP-FUEL
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-0960 | [6] | CLAMP-HOSE | |
| 2. | 5P-1442 E | HOSE (900 CM) | ||
| 3. | 9M-8406 | [3] | CLIP | |
| 4. | 8T-4137 M | [6] | BOLT | |
| 5. | 8T-4121 | [10] | WASHER | |
| 6. | 8D-1470 | [1] | GROMMET | |
| 7. | 093-2064 | [1] | GROMMET | |
| 8. | 5K-8451 | [5] | CLIP | |
| 9. | 8T-4133 M | [2] | NUT | |
| 10. | 8J-3415 | [1] | GROMMET | |
| 11. | 8T-6868 M | [2] | BOLT | |
| 12. | 8T-4223 | [2] | WASHER | |
| 13. | 4I-8355 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-6H THD) | ||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-6H THD) | ||
| 14. | 094-3551 | [1] | SEPARATOR-WATER | |
| 15. | 8T-4136 M | [2] | BOLT | |
| 7K-1181 BF | [1] | STRAP-CABLE | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP21870113
6I-2693: FILTER GP-FUEL
6I2693 FILTER GP-FUEL
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-1974 B | [1] | WASHER-HARD | |
| 2. | 6V-9607 MB | [1] | BOLT | |
| 3. | 3J-1907 | [1] | SEAL-O-RING | |
| 4. | 7C-1159 | [1] | GASKET | |
| 5. | 6V-5218 M | [2] | BOLT | |
| 6. | 1R-0751 | [1] | FILTER AS-FUEL | |
| 7. | 9S-4191 | [1] | PLUG-O-RING | |
| 8. | 6I-4802 C | [1] | BASE AS | |
| 9. | 6I-4801 C | [1] | INSERT-FILTER | |
| 10. | 9M-1974 | [3] | WASHER-HARD | |
| 11. | 6V-9607 M | [1] | BOLT | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP21870114
9Y-0283: FITTING GP-FUEL
9Y0283 FITTING GP-FUEL
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SIS#SEBP21870115
6I-6133: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-6134 Y | [1] | TANK GP-FUEL | |
| 2. | 087-8737 B | [4] | SHIM (2.0MM THICK) | |
| 087-8738 B | [4] | SHIM (1.0MM THICK) | ||
| 087-8739 B | [4] | SHIM (0.7MM THICK) | ||
| 087-8740 B | [4] | SHIM (0.4MM THICK) | ||
| 3. | 8T-4779 M | [4] | BOLT | |
| 4. | 3G-8856 | [4] | WASHER-SPECIAL | |
| 5. | 5P-8502 | [1] | PADLOCK GP | |
| 5P-8500 A | [1] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| 6. | 6V-5874 | [1] | COVER | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21870116
6I-6134: TANK GP-FUEL
6I6134 TANK GP-FUEL
PART OF 6I6133 TANK AND MOUNTING GP
PART OF 6I6133 TANK AND MOUNTING GP
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7I-0411 | [1] | LINER | |
| 2. | 105-9993 | [1] | SENSOR-FUEL LEVEL | |
| 7N-9737 | [1] | HOUSING-PLUG | ||
| 7N-7779 | [1] | SOCKET | ||
| 7N-7780 | [1] | PIN-CONNECTOR (BLADE) | ||
| 3. | 095-2643 | [1] | PACKING | |
| 4. | 095-0736 M | [5] | SCREW-MACHINE (M5X0.8X10MM) | |
| 5. | 8T-0328 | [5] | WASHER-HARD (1MM THK) | |
| 6. | 7Y-2398 | [1] | GAUGE AS (FUEL LEVEL) | |
| 7. | 095-1514 | [4] | SEAL-O-RING (9.80MM ID) | |
| 8. | 095-1517 | [4] | SEAL-O-RING (13.8MM ID) | |
| 9. | 4I-0123 | [1] | PIPE | |
| 10. | 7Y-4754 | [2] | BLOCK | |
| 11. | 094-3247 M | [2] | BOLT (M10X1.5X36MM) | |
| 12. | 9P-7121 | [1] | STRAINER-FUEL TANK | |
| 13. | 7X-7700 LJ | [1] | CAP AS-FUEL TANK | |
| 9X-8600 | [1] | SEAL-O-RING (110.49MM ID) | ||
| 14. | 9S-6130 | [1] | PLUG-O-RING (1-5/8-12 THD) | |
| 15. | 2S-4078 | [1] | SEAL-O-RING (37.46MM ID) | |
| 16. | 2S-3440 | [1] | CLAMP-HOSE | |
| 17. | 087-3832 | [1] | CAP | |
| 18. | 5G-4109 | [1] | SCREEN-SUMP | |
| 19. | 003-7764 | [2] | END-HOSE | |
| 20. | 9N-3666 | [1] | VALVE AS (SUPPLY) | |
| 21. | 5P-1442 E | HOSE (15 CM) | ||
| 22. | 095-1388 | [1] | CLAMP-HOSE | |
| 23. | 6V-5710 | [1] | VALVE-BALL (DRAIN) | |
| 24. | 7I-0410 | [1] | LINER | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 9X-2205 J | [1] | KIT-CAP FILTER | ||
| (INCLUDES FILTER AS., | ||||
| SCREWS, GASKETS & VALVE) | ||||
| L-REQUIRES 5P8502 | ||||
| PADLOCK GP | ||||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP21870117
7C-4028: SOLENOID GP-SHUTOFF
7C4028 SOLENOID GP-SHUT-OFF
24 VOLT
24 VOLT
For full view, you need register
#SEBP21870118
7Y-8267: WIRING GP
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-5490 | [1] | RELAY | |
| 2. | 7Y-8212 | [1] | BRACKET AS | |
| 3. | 1S-9593 | [3] | STRAP-CABLE | |
| 4. | 8T-4121 | [7] | WASHER | |
| 5. | 8T-4191 M | [6] | BOLT | |
| 6. | 8T-4133 M | [3] | NUT | |
| 7. | 8M-2770 | [2] | CLIP | |
| 8. | 8M-2772 | [3] | CLIP | |
| 9. | 7Y-3855 | [1] | HARNESS AS | |
| 10. | 7Y-8263 | [1] | SWITCH AS (REFUELING PUMP) | |
| 6V-2689 BD | TUBE-SHRINKABLE | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP21870119
7Y-5460: CONTROL GP-ELECTRONIC
7Y5460 CONTROL GP-ELECTRONIC
PART OF 7Y3827 MOUNTING-CONTROL
PART OF 7Y3827 MOUNTING-CONTROL
For full view, you need register
Parts for your 325 L EXCAVATOR:
CATERPILLAR SISInformation:
FUEL SYSTEM
CONTROL GP-FUEL INJECTION
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Technical Information Bulletin
Disassembly and Assembly
Fuel Injection Control Linkage - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Parts SIS Catalog 325 L :
Truck sale:
75.000