AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

875565 CYLINDER & SEAL GP 7Y5100-PAGE 293 PART OF 7Y0084 LINKAGE AR-BUCKET (C FAMILY) AN ATTACHMENT 325 L


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
VALVE GP-CHECK & RELIEF

EXCAVATOR 325 L EXCAVATOR 8NK
 325, 325L EXCAVATOR 8NK00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2187 325 L 8NK   (2016)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP
7Y-5199 CYLINDER & SEAL GP
CYLINDER & SEAL GP
4I-7649 CYLINDER & SEAL GP
CYLINDER & SEAL GP
087-5565 CYLINDER & SEAL GP
CYLINDER GP-BUCKET
4I-7652 CYLINDER GP-BUCKET
CYLINDER & SEAL GP
7Y-5195 CYLINDER & SEAL GP
CYLINDER GP
7Y-5150 CYLINDER GP
 

#SEBP21870400
 

087-5565: CYLINDER & SEAL GP

875565 CYLINDER & SEAL GP
7Y5100-PAGE 293
PART OF 7Y0084 LINKAGE AR-BUCKET (C FAMILY)
AN ATTACHMENT
c526486 SEBP2187
0875565 CYLINDER & SEAL GP Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-5100 Y [1] CYLINDER GP-BUCKET  
2. 096-0854 [2] SEAL-LIP TYPE  
3. 3B-8489 [2] FITTING-GREASE  
4. 093-1434 [2] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21870401
 

4I-7652: CYLINDER GP-BUCKET

4I7652 CYLINDER GP (CHG J01)
100MM (3.9 IN) BORE X 939MM (36.97 IN) STROKE
S/N 8NK1-UP. PART OF 4I7649 CYLINDER & SEAL
AN ATTACHMENT
c634624 SEBP2187
4I7652 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-8901 [1] CYLINDER AS  
2. 7I-1018 M [1] LOCKNUT  
3. 093-1605 J [1] RING  
4. 9X-7298 J [1] SEAL AS  
5. 093-1628 J [1] RING  
6. 7I-7185 [1] PISTON  
7. 095-1713 J [1] SEAL-O-RING (94.4MM ID)  
8. 4I-7658 J [1] RING  
9. 099-0700 [1] RING-RETAINING  
10. 093-1816 [1] BEARING-SLEEVE  
11. 4I-8845 [1] HEAD  
12. 4I-7655 R [1] ROD AS  
13. 6E-3535 [1] BEARING-SLEEVE  
14. 7Y-5241 M [8] BOLT-SOCKET HEAD (M20X2.5X60MM)  
15. 093-1482 J [1] SEAL-BUFFER (64.0MM ID)  
16. 116-3390 J [1] SEAL-LIP TYPE (62.9MM ID )  
17. 096-1055 J [1] RING  
18. 095-7102 J [1] SEAL-LIP  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
   
  4I-7664 [1] KIT-SEAL ((CONSISTS OF)  
    PARTS MARKED J)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP21870402
 

7Y-5195: CYLINDER & SEAL GP

7Y5195 CYLINDER & SEAL GP
875531-PAGE 293.01
AN ATTACHMENT
c542950 SEBP2187
7Y5195 CYLINDER & SEAL GP Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE  
2. 7X-4803 [2] SEAL-LIP TYPE  
3. 087-5531 Y [1] CYLINDER GP  
4. 9X-4597 [2] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP21870403
 

7Y-5150: CYLINDER GP

7Y5150 CYLINDER GP (CHANGES 04,05)
150 MM (6 IN) BORE X 1156 MM (46 IN) STROKE
PART OF 875552 CYLINDER & SEAL
AN ATTACHMENT
c583295 SEBP2187
7Y5150 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4671 J [1] SEAL-BUFFER  
2. 7Y-4695 M [1] LOCKNUT-SPECIAL  
3. 7Y-4697 J [1] RING  
4. 9X-3601 J [1] SEAL AS  
5. 096-1581 J [1] RING  
6. 7I-7180 [1] PISTON  
7. 7Y-5215 M [8] BOLT-SOCKET HEAD  
8. 7Y-4670 J [1] SEAL-U-CUP  
9. 7Y-4660 [1] HEAD  
10. 093-1828 [1] BEARING-SLEEVE  
11. 7Y-4672 [1] RING-RETAINING  
12. 095-1633 J [1] SEAL-O-RING  
13. 7Y-4673 J [1] RING  
14. 114-0647 J [1] SEAL-LIP TYPE  
15. 7Y-4669 J [1] RING  
16. 7Y-5157 R [1] ROD AS  
17. 7Y-5102 [1] BEARING-SLEEVE  
18. 4I-1624 R [1] CYLINDER AS  
19. 7Y-4666 [1] BEARING-SLEEVE  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7Y-4698 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP21870404
 

087-5633: CYLINDER GP-BUCKET

875633 CYLINDER GP (CHANGE 00)
120 MM (5 IN) BORE X 1030 MM (41 IN) STROKE
PART OF 7Y5199 CYLINDER & SEAL
AN ATTACHMENT
c597250 SEBP2187
0875633 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1040 R [1] CYLINDER AS  
  7Y-5131 [1] BEARING-SLEEVE  
2. 087-5504 M [1] LOCKNUT  
3. 087-5505 J [1] RING  
4. 9X-3592 J [1] SEAL AS  
5. 093-1630 J [1] RING  
6. 7I-7184 [1] PISTON  
7. 7Y-5216 M [8] BOLT-SOCKET HEAD  
8. 087-5640 R [1] ROD AS  
  4I-0704 [1] BEARING-SLEEVE  
9. 087-5511 [1] HEAD  
10. 093-1824 [1] BEARING-SLEEVE  
11. 7Y-5119 [1] RING-RETAINING  
12. 087-5510 J [1] RING  
13. 095-1717 J [1] SEAL-O-RING  
14. 114-0644 J [1] SEAL-LIP  
15. 7Y-5116 J [1] RING  
16. 7Y-5117 J [1] SEAL-U-CUP  
17. 7Y-5118 J [1] SEAL-BUFFER  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  087-5394 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP21870405
 

7Y-5100: CYLINDER GP-BUCKET

7Y5100 CYLINDER GP-BUCKET (CHANGE 05)
130 MM (5 IN) BORE X 1156 MM (46 IN) STROKE
PART OF 875565 CYLINDER & SEAL
AN ATTACHMENT
c711183 SEBP2187
7Y5100 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1620 R [1] CYLINDER AS  
2. 7Y-5131 [1] BEARING-SLEEVE  
3. 7Y-4636 [1] RING  
4. 9X-3595 J [1] SEAL AS  
5. 7Y-4632 J [1] RING  
6. 7I-7183 [2] PISTON  
7. 7Y-5216 M [8] BOLT-SOCKET HEAD  
8. 7Y-5108 R [1] ROD AS  
  7Y-5128 [1] BEARING-SLEEVE  
9. 7Y-5130 [1] HEAD  
10. 114-0756 [1] BEARING-SLEEVE  
11. 7Y-5119 [1] RING-RETAINING  
12. 7Y-4633 J [1] RING  
13. 095-1631 J [1] SEAL-O-RING  
14. 114-0644 J [1] SEAL-LIP  
15. 7Y-5116 J [1] RING  
16. 7Y-5117 J [1] SEAL-U-CUP  
17. 7Y-5118 J [1] SEAL-BUFFER  
18. 7Y-4622 M [1] LOCKNUT  
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE :
   
  7Y-5145 [1] KIT-SEAL  
    (INCLS PARTS MARKED J)
   
  135-9059 [1] KIT-SEAL  
    (HIGH TEMPERATURE)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP21870406
 

087-5531: CYLINDER GP

875531 CYLINDER GP
160 MM (7 IN) BORE X 1356 MM (54 IN) STROKE
AN ATTACHMENT
c579056 SEBP2187
0875531 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0981 [1] CYLINDER AS  
2. 087-5533 [1] BEARING-SLEEVE  
3. 087-5539 J [1] RING  
4. 9X-3604 J [1] SEAL AS  
5. 096-3201 J [1] RING  
6. 7I-7187 [1] PISTON  
7. 095-1635 J [1] SEAL-O-RING  
8. 087-5550 J [1] RING  
9. 7Y-4944 [1] RING-RETAINING  
10. 093-1829 [1] BEARING-SLEEVE  
11. 087-5551 [1] HEAD  
12. 087-5541 [1] ROD AS  
13. 087-5548 [1] BEARING-SLEEVE  
14. 7Y-5239 M [8] BOLT-SOCKET HEAD  
15. 7Y-4943 J [1] SEAL-BUFFER  
16. 7Y-4942 J [1] SEAL-U CUP  
17. 7Y-4941 J [1] RING  
18. 111-9957 J [1] SEAL-LIP TYPE  
19. 7Y-4695 [1] LOCKNUT-SPECIAL  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  087-6654 [1] KIT-SEAL (CONSISTS OF  
    PARTS MARKED J)
  M   METRIC PART
 

#SEBP21870407
 

7Y-8318: LINES GP-BOOM CYLINDER

7Y8318 LINES GP-BOOM CYLINDER
875343-PAGE 295
PART OF 7Y7974 VALVE AR-CHECK & RELIEF
AN ATTACHMENT
c606027 SEBP2187
7Y8318 LINES GP-BOOM CYLINDER Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5440 [1] BLOCK  
2. 6V-9182 [2] ELBOW-FACE SEAL  
3. 7M-8485 [2] SEAL-O-RING (29.74MM ID)  
4. 4J-5267 [2] SEAL (24.99MM ID)  
5. 8T-4196 M [8] BOLT (M10X1.50X35MM)  
6. 087-5349 [1] TUBE AS  
7. 6V-9746 [8] SEAL-O-RING (18.94MM ID)  
8. 087-5350 [1] TUBE AS  
9. 087-5348 [1] TUBE AS  
10. 8T-4186 M [4] BOLT (M10X1.50X40MM)  
11. 8T-4121 [44] WASHER (21MM OD)  
12. 087-5339 [1] TUBE AS  
13. 087-5342 [1] TUBE AS  
14. 087-5341 [1] TUBE AS  
15. 087-5344 [1] BLOCK  
16. 7T-7679 [4] PLUG-STRAIGHT THREAD  
17. 2M-9780 [4] SEAL-O-RING (19.18MM ID)  
18. 8T-4185 M [16] BOLT (M10X1.50X50MM)  
19. 7X-2543 M [8] BOLT (M10X1.50X120MM)  
20. 087-5343 Y [2] VALVE GP-CHECK & RELIEF  
21. 8T-4195 M [12] BOLT (M10X1.50X30MM)  
22. 7Y-4642 [6] SUPPORT AS  
23. 8T-4136 M [12] BOLT (M10X1.50X25MM)  
24. 087-5345 [2] SUPPORT AS  
25. 1P-3703 [6] SEAL-RECTANGULAR  
26. 4I-3939 [2] BAR  
27. 8T-4137 M [4] BOLT (M10X1.50X20MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21870408
 

087-5343: VALVE GP-CHECK & RELIEF

875343 VALVE GP-CHECK & RELIEF
TYPE 1
PART OF 7Y8318 LINES-BOOM CYLINDER
AN ATTACHMENT
c575219 SEBP2187
0875343 VALVE GP-CHECK & RELIEF Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8004 [2] PLUG-O-RING  
2. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
3. 9S-9334 [1] PLUG  
4. 7M-8485 [1] SEAL-O-RING (29.74MM) ID  
5. 087-4668 [1] BODY  
6. 087-4669 [1] VALVE  
7. 065-9051 [1] SPRING-POPPET  
8. 087-4671 [1] PLUG  
9. 085-7539 [1] SEAL-O-RING  
10. 7J-0204 [2] SEAL-O-RING  
11. 087-4673 [1] PIN  
12. 087-4674 [1] VALVE  
13. 087-4675 [1] SPRING  
14. 6V-5722 [1] SEAL-O-RING  
15. 087-4676 [1] PISTON  
16. 087-4677 M [1] BOLT  
17. 087-4678 M [1] LOCKNUT  
18. 087-4679 [1] PLUG  
19. 087-4660 [1] ORIFICE  
20. 9S-8007 [1] PLUG-O-RING  
21. 087-4659 [1] COVER  
22. 099-8232 [1] SEAL-O-RING  
23. 087-4663 [1] STEM AS  
24. 087-4661 [1] VALVE  
25. 087-4662 [1] BALL  
26. 085-7537 [1] SEAL-O-RING  
27. 087-4665 M [1] BOLT  
28. 087-4683 [1] LOCKWASHER  
29. 087-4666 M [1] LOCKNUT  
30. 087-4667 [1] PISTON  
31. 8T-0341 M [4] BOLT-SOCKET HEAD  
32. 087-4680 [2] PLUG  
  M   METRIC PART
 

#SEBP21870409
 

087-5343: VALVE GP-CHECK & RELIEF

875343 VALVE GP-CHECK & RELIEF
TYPE 2
PART OF 7Y8318 LINES-BOOM CYLINDER
AN ATTACHMENT
SEBP21870409 SEBP2187
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
  102-0787 Y [1] VALVE GP  
    -OR-
  105-7401 Y [1] VALVE GP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Repairing and Strengthening Stick Assemblies' Support Brackets and Reinforcing a Center Boss Assembly{6502}
Repairing and Strengthening Stick Assemblies' Support Brackets and Reinforcing a Center Boss Assembly{6502}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators
Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
325, 325L AND 325LN EXCAVATORS HYDRAULIC SYSTEM
Stick Cylinder
325, 325L AND 325LN EXCAVATORS HYDRAULIC SYSTEM
Bucket Cylinder
325, 325L AND 325LN EXCAVATORS HYDRAULIC SYSTEM
Hydraulic Cylinders
325, 325L AND 325N EXCAVATOR ATTACHMENTS
Boom Cylinder Lines Group<BR> 4I3664
325, 325L AND 325N EXCAVATOR ATTACHMENTS
Track Adjuster
325, 325B and 325L Excavators
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder
325, 325L & 325N EXCAVATORS VEHICLE SYSTEMS
Stick Cylinder
325, 325L & 325N EXCAVATORS VEHICLE SYSTEMS
Boom Cylinders
325, 325L & 325N EXCAVATORS VEHICLE SYSTEMS
Service Magazine
Reduced Bucket Cylinder Hose Droop{5457,5057}
1993/09/20
Stick Cylinder Rebuild Requires Snap Ring Replacement {5458}
1993/10/04
New Stick Cylinder Provides Better Retention Of Stop, Prevents Scoring Of Cylinder Walls {5458}
1993/10/04
Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26
Anti-Stick Oil Eliminates Noise From Implement Cylinder Piston Seals{5068}
1995/03/13
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
New Bearings In The Boom, Stick, And Boom Cylinder Assemblies Improve Linkage Pin Service Life{6501,6502}
1997/10/20
Torque for Stick Cylinder Piston Nut in Specifications Module Is Incorrect {5458,0374}
1998/08/10
New Seal Kits Prevent Hydraulic Cylinder Oil Leaks {5456,5457,5458}
1998/11/23
An Improved Dust Seal for Hydraulic Cylinders Increases the Service Life {5456, 5457, 5458, 7555, 7555}
2000/07/10
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
New High Temperature Buffer Seals Reduce Oil Leakage From Hydraulic Cylinders {7562}
2002/05/06
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 325 L :

CYLINDER & SEAL GP
4I-7649 CYLINDER & SEAL GP
CYLINDER & SEAL GP
7Y-5199 CYLINDER & SEAL GP
CYLINDER & SEAL GP
087-5552 CYLINDER & SEAL GP
CYLINDER & SEAL GP
4I-1720 CYLINDER & SEAL GP
CYLINDER & SEAL GP
4I-1721 CYLINDER & SEAL GP
CYLINDER GP-STICK
7Y-4650 CYLINDER GP-STICK
CYLINDER GP-BOOM
7Y-4601 CYLINDER GP-BOOM
CONTROL GP-HYDRAULIC
7Y-6009 CONTROL GP-HYDRAULIC
CYLINDER GP-BUCKET
4I-7652 CYLINDER GP-BUCKET
CYLINDER & SEAL GP
7Y-5195 CYLINDER & SEAL GP
CYLINDER GP
7Y-5150 CYLINDER GP
CYLINDER GP-BUCKET
087-5633 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
7Y-5100 CYLINDER GP-BUCKET
CYLINDER GP
087-5531 CYLINDER GP
LINES GP-BOOM CYLINDER
7Y-8318 LINES GP-BOOM CYLINDER
VALVE GP-CHECK & RELIEF
087-5343 VALVE GP-CHECK & RELIEF

Truck sale:

Caterpillar 325L, Crawler Excavators, Construction
46,000 
Caterpillar 325L, Crawler Excavators, Construction
- Crawler Excavators
NMC
Caterpillar 325L, Crawler Excavators, Construction
36,350 
Caterpillar 325L, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT
Caterpillar 325L, Feller Bunchers, Forestry equipment
22,376 
Caterpillar 325L, Feller Bunchers, Forestry equipment

FINNING CANADA
Caterpillar 325 LL, Boomstamladers, Bosbouw
75.000 
Caterpillar 325 LL, Boomstamladers, Bosbouw
- Knuckleboom loaders
N C MACHINERY CO.
Caterpillar 325 LL, Raupenbagger, Bau-Und Bergbauausrüstung
75.000 
Caterpillar 325 LL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.