POWER TRAIN
CONTROL GP-TRANSMISSION HYDTRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP21880380
3T-0288: CONTROL GP-TRANSMISSION HYD
3T-0288 CONTROL GP-TRANSMISSION HYD
S/N 2BE2130-UP
PART OF 3T-0034 TRANSMISSION AR
S/N 2BE2130-UP
PART OF 3T-0034 TRANSMISSION AR
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-9944 | [2] | SLEEVE | |
| 8M-5254 | [4] | SEAL-O-RING | ||
| 2. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 3. | 9G-9928 | [2] | FLANGE-ONE PIECE | |
| 4. | 2H-3927 | [2] | SEAL-O-RING | |
| 5. | 107-8238 Y | [1] | VALVE GP-SOLENOID (DOWNSHIFT) | |
| 6. | 3T-0289 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 7. | 8M-8157 | [6] | SEAL-O-RING | |
| 8. | 3T-0918 | [3] | SLEEVE | |
| 9. | 6T-8823 | [1] | GUARD AS | |
| 10. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 11. | 9L-9132 | [4] | WASHER (10.2X25.5X2.5-MM THK) | |
| 12. | 9F-2773 | [4] | BOLT (3/8-16X8.5-IN) | |
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 13. | 3T-0919 | [1] | SLEEVE | |
| 6V-4365 | [2] | SEAL-O-RING | ||
| 14. | 9S-8001 | [5] | PLUG | |
| 4J-7533 | [5] | SEAL-O-RING | ||
| 15. | 9G-9150 | [3] | CLIP | |
| 0S-1594 | [3] | BOLT (3/8-16X1-IN) | ||
| 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 16. | 107-8238 Y | [1] | VALVE GP-SOLENOID (LOCKUP CLUTCH) | |
| 17. | 107-8238 Y | [1] | VALVE GP-SOLENOID (UPSHIFT) | |
| 18. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 19. | 3J-1907 | [2] | SEAL-O-RING | |
| 20. | 6T-5132 | [1] | COVER | |
| 6T-5133 | [1] | GASKET | ||
| 21. | 0S-1617 | [6] | BOLT (5/16-18X0.75-IN) | |
| 22. | 7S-5757 | [1] | RING-RETAINING | |
| 23. | 5F-7054 | [5] | SEAL-O-RING | |
| 24. | 8M-4446 | [1] | SEAL-O-RING | |
| 25. | 6Y-9850 | [1] | COUPLING AS | |
| 26. | 8S-5575 | [1] | SEAL-LIP TYPE | |
| 27. | 6T-3340 Y | [1] | VALVE GP-LUBE RELIEF (TRANSMISSION OIL RETURN) | |
| 28. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 29. | 3D-4197 | [1] | COVER | |
| 30. | 120-9288 C | [1] | HARNESS AS-TRANSMISSION | |
| 8M-4988 | [1] | SEAL-O-RING | ||
| 31. | 118-8471 CY | [1] | SENSOR GP-POSITION (TRANSMISSION GEAR) | |
| 32. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 33. | 6V-0852 | [1] | CAP-DUST (TRANSMISSION CONTROL) | |
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 34. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
| 35. | 0S-1619 | [2] | BOLT (3/8-16X3-IN) | |
| 36. | 9S-8005 | [4] | PLUG (3/4-16-THD) | |
| 37. | 3K-0360 | [5] | SEAL-O-RING | |
| 38. | 9U-9714 | [1] | MANIFOLD AS | |
| 39. | 5P-7661 | [1] | BEARING AS-NEEDLE | |
| 40. | 9S-8001 | [5] | PLUG | |
| 4J-7533 | [5] | SEAL-O-RING | ||
| 41. | 6V-9830 | [1] | CAP (ORFS) | |
| 6V-9356 | [1] | PLUG | ||
| 42. | 6V-8554 | [1] | NUT (13/16-16-THD) | |
| 43. | 6V-8398 | [1] | SEAL-O-RING | |
| 44. | 6V-8625 | [1] | ELBOW | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21880381
7T-4997: COVER GP-SHIPPING
7T-4997 COVER GP-SHIPPING -TRANSMISSION CONTROL-TRANSMISSION
S/N 2BE1450-UP
PART OF 3T-0034 TRANSMISSION AR
S/N 2BE1450-UP
PART OF 3T-0034 TRANSMISSION AR
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6J-1218 | [1] | ADAPTER | |
| 2. | 7T-6829 | [1] | COVER AS | |
| 3. | 0L-1178 | [8] | BOLT (3/4-10X2-IN) | |
| 4. | 0S-1583 | [2] | BOLT (3/4-10X1.25-IN) | |
| 5. | 0S-1589 | [4] | BOLT (5/8-11X1.75-IN) | |
| 6. | 148-8407 | [1] | PLUG AS | |
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 7. | 1A-1460 | [12] | BOLT (1/2-13X2-IN) | |
| 8. | 4J-0527 | [1] | SEAL-O-RING | |
| 9. | 1S-3730 | [2] | COVER | |
| 10. | 244-3712 | [1] | PLUG AS | |
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 11. | 2H-6338 | [1] | SEAL-O-RING | |
| 12. | 2J-3506 | [8] | NUT-FULL (3/4-10-THD) | |
| 13. | 307-2670 | [1] | PLUG AS | |
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 14. | 3E-7434 | [1] | COVER | |
| 15. | 4T-7968 | [2] | GASKET | |
| 16. | 5P-8248 | [10] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 17. | 7J-0402 | [1] | COVER | |
| 18. | 8E-7367 | [1] | GASKET |
#SEBP21880382
104-5349: DIFFERENTIAL & BEVEL GEAR GP
104-5349 DIFFERENTIAL & BEVEL GEAR GP
S/N 5RK13-13
PART OF 8X-9495 POWER TRAIN AR
S/N 5RK13-13
PART OF 8X-9495 POWER TRAIN AR
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-9544 Y | [1] | DIFFERENTIAL GP | |
| 2. | 5P-8248 | [66] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 3. | 2J-3506 | [50] | NUT-FULL (3/4-10-THD) | |
| 4. | 5D-6428 | [1] | SEAL-O-RING | |
| 5. | 0S-1587 | [12] | BOLT (1/2-13X1.75-IN) | |
| 6. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 2K-0337 | [16] | LOCKNUT (3/4-16-THD) | |
| 8. | 5T-5967 | [1] | CAGE-BEARING | |
| 9. | 5T-5970 | [1] | RING-ADJUSTMENT | |
| 10. | 6V-2702 | [1] | CONE-BEARING | |
| 11. | 2J-7137 | [1] | CUP-BEARING | |
| 12. | 5T-5921 | [2] | PLATE | |
| 13. | 2H-3932 | [1] | SEAL-O-RING | |
| 14. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 15. | 8M-3391 | [1] | COVER | |
| 16. | 9M-5874 B | [1] | SHIM PACK (INCLUDES 30-SHIMS) | |
| 17. | 7D-3504 | [24] | STUD-TAPERLOCK (3/4-10X3.39-IN) | |
| 18. | 2N-2189 | [1] | CONE-BEARING | |
| 19. | 2N-2188 | [1] | CUP-BEARING | |
| 20. | 5T-5966 | [1] | CAGE-BEARING | |
| 21. | 5T-5929 | [1] | RING-ADJUSTMENT | |
| 22. | 2M-3340 | [1] | SEAL-O-RING | |
| 23. | 3D-3295 | [1] | SEAL-O-RING | |
| 24. | 2B-9873 | [16] | BOLT-SPECIAL (3/4-16X3.15-IN) | |
| 25. | 6K-7917 | [2] | BOLT-LOCKING (1/2-13X1-IN) | |
| 26. | 5T-8684 | [1] | GEAR-DIFFERENTIAL RING (42-TEETH)(42 TEETH) | |
| 27. | 7D-3029 | [1] | PIN-THRUST | |
| 28. | 6V-0457 | [1] | CONE-BEARING | |
| 29. | 6V-0458 | [1] | CUP-BEARING | |
| 30. | 6V-0459 | [1] | CONE-BEARING | |
| 31. | 6V-0460 | [1] | CUP-BEARING | |
| 32. | 104-5351 | [1] | PINION AS | |
| 4B-4098 | [1] | PLUG-CUP | ||
| 33. | 105-1885 | [1] | SEAL AS | |
| 34. | 6G-6824 B | [10] | SHIM (.12MM THK) | |
| 35. | 6G-6825 B | [10] | SHIM (.18MM THK) | |
| 36. | 104-3932 | [1] | CAGE AS-BEARING | |
| 0L-1026 | [1] | PLUG-CUP | ||
| 37. | 5T-9058 | [1] | CARRIER AS-DIFFERENTIAL | |
| 4D-0537 | [2] | DOWEL | ||
| 38. | 3D-5692 | [4] | BUSHING-TERMINAL | |
| 39. | 8D-9512 | [4] | BOLT (1-1/8-7X7-IN) | |
| 40. | 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21880383
104-5349: DIFFERENTIAL & BEVEL GEAR GP
104-5349 DIFFERENTIAL & BEVEL GEAR GP
S/N 5RK14-15
PART OF 8X-9495 POWER TRAIN AR
S/N 5RK14-15
PART OF 8X-9495 POWER TRAIN AR
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-9544 Y | [1] | DIFFERENTIAL GP | |
| 2. | 5P-8248 | [66] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 3. | 2J-3506 | [50] | NUT-FULL (3/4-10-THD) | |
| 4. | 5D-6428 | [1] | SEAL-O-RING | |
| 5. | 0S-1587 | [12] | BOLT (1/2-13X1.75-IN) | |
| 6. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 2K-0337 | [16] | LOCKNUT (3/4-16-THD) | |
| 8. | 5T-5967 | [1] | CAGE-BEARING | |
| 9. | 5T-5970 | [1] | RING-ADJUSTMENT | |
| 10. | 6V-2702 | [1] | CONE-BEARING | |
| 11. | 2J-7137 | [1] | CUP-BEARING | |
| 12. | 5T-5921 | [2] | PLATE | |
| 13. | 2H-3932 | [1] | SEAL-O-RING | |
| 14. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 15. | 8M-3391 | [1] | COVER | |
| 16. | 9M-5874 B | [1] | SHIM PACK (INCLUDES 30-SHIMS) | |
| 17. | 7D-3504 | [24] | STUD-TAPERLOCK (3/4-10X3.39-IN) | |
| 18. | 121-0151 | [1] | CONE-BEARING | |
| 19. | 121-0152 | [1] | CUP-TAPERED BEARING | |
| 20. | 5T-5966 | [1] | CAGE-BEARING | |
| 21. | 5T-5929 | [1] | RING-ADJUSTMENT | |
| 22. | 2M-3340 | [1] | SEAL-O-RING | |
| 23. | 3D-3295 | [1] | SEAL-O-RING | |
| 24. | 2B-9873 | [16] | BOLT-SPECIAL (3/4-16X3.15-IN) | |
| 25. | 6K-7917 | [2] | BOLT-LOCKING (1/2-13X1-IN) | |
| 26. | 5T-8684 | [1] | GEAR-DIFFERENTIAL RING (42-TEETH) | |
| 27. | 7D-3029 | [1] | PIN-THRUST | |
| 28. | 6V-0457 | [1] | CONE-BEARING | |
| 29. | 6V-0458 | [1] | CUP-BEARING | |
| 30. | 6V-0459 | [1] | CONE-BEARING | |
| 31. | 6V-0460 | [1] | CUP-BEARING | |
| 32. | 104-5351 | [1] | PINION AS | |
| 4B-4098 | [1] | PLUG-CUP | ||
| 33. | 105-1885 | [1] | SEAL AS | |
| 34. | 6G-6824 B | [10] | SHIM (.12MM THK) | |
| 35. | 6G-6825 B | [10] | SHIM (.18MM THK) | |
| 36. | 104-3932 | [1] | CAGE AS-BEARING | |
| 0L-1026 | [1] | PLUG-CUP | ||
| 37. | 109-6534 C | [1] | CARRIER AS-DIFFERENTIAL | |
| 4D-0537 | [2] | DOWEL | ||
| 38. | 3D-5692 | [4] | BUSHING-TERMINAL | |
| 39. | 8D-9512 | [4] | BOLT (1-1/8-7X7-IN) | |
| 40. | 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21880384
125-6181: DIFFERENTIAL & BEVEL GEAR GP
125-6181 DIFFERENTIAL & BEVEL GEAR GP
S/N 5RK16-UP
PART OF 8X-9495 POWER TRAIN AR
S/N 5RK16-UP
PART OF 8X-9495 POWER TRAIN AR
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-9544 Y | [1] | DIFFERENTIAL GP | |
| 2. | 7F-2050 | [1] | LOCKNUT (3/4-16-THD) | |
| 3. | 132-6597 | [1] | CONE-BEARING | |
| 4. | 6V-0458 | [1] | CUP-BEARING | |
| 5. | 3D-3295 | [1] | SEAL-O-RING | |
| 6. | 7D-3504 | [24] | STUD-TAPERLOCK (3/4-10X3.39-IN) | |
| 7. | 5P-8248 | [66] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 8. | 2J-3506 | [50] | NUT-FULL (3/4-10-THD) | |
| 9. | 5D-6428 | [1] | SEAL-O-RING | |
| 10. | 125-8649 B | [10] | SHIM (0.12-MM THK) | |
| 11. | 125-8650 B | [10] | SHIM (0.18-MM THK) | |
| 12. | 6V-0459 | [1] | CONE-BEARING | |
| 13. | 6V-0460 | [1] | CUP-BEARING | |
| 14. | 2M-3340 | [1] | SEAL-O-RING | |
| 15. | 130-8905 | [1] | CAGE AS-BEARING | |
| 0L-1026 | [1] | PLUG-CUP | ||
| 16. | 105-1885 | [1] | SEAL AS | |
| 17. | 308-7793 | [1] | PINION AS | |
| 19. | 5P-8245 | [20] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 2B-9873 | [16] | BOLT-SPECIAL (3/4-16X3.15-IN) | |
| 21. | 2K-0337 | [16] | LOCKNUT (3/4-16-THD) | |
| 22. | 5T-5967 | [1] | CAGE-BEARING | |
| 23. | 130-7597 | [1] | RING-ADJUSTMENT | |
| 24. | 6V-2702 | [1] | CONE-BEARING | |
| 25. | 2J-7137 | [1] | CUP-BEARING | |
| 26. | 5T-5921 | [2] | PLATE | |
| 27. | 2H-3932 | [1] | SEAL-O-RING | |
| 28. | 5P-2566 | [2] | BOLT (1/2-13X1.5-IN) | |
| 29. | 8M-3391 | [1] | COVER | |
| 30. | 9M-5874 B | [1] | SHIM PACK (INCLUDES 30-SHIMS) | |
| 31. | 7D-3029 | [1] | PIN-THRUST | |
| 32. | 5T-8684 | [1] | GEAR-DIFFERENTIAL RING (42-TEETH) | |
| 33. | 6K-7917 | [2] | BOLT-LOCKING (1/2-13X1-IN) | |
| 34. | 133-5101 | [1] | CONE-SPECIAL TAPERED | |
| 35. | 133-5102 | [1] | CUP-SPECIAL TAPERED | |
| 36. | 5T-5966 | [1] | CAGE-BEARING | |
| 37. | 117-2991 | [1] | RING-ADJUSTMENT | |
| 38. | 8M-0547 | [1] | ELBOW-FLARED (SWIVEL) | |
| 39. | 8M-0755 | [1] | ADAPTER | |
| 41. | 118-3809 | [1] | TUBE AS | |
| 42. | 0S-1587 | [1] | BOLT (1/2-13X1.75-IN) | |
| 43. | 090-6372 | [1] | FITTING-STRAIGHT | |
| 44. | 126-0985 | [1] | CARRIER AS-DIFFERENTIAL | |
| 44A. | 4D-0537 | [2] | DOWEL | |
| 44B. | 3D-5692 | [4] | BUSHING-TERMINAL | |
| 44C. | 8D-9512 | [4] | BOLT (1-1/8-7X7-IN) | |
| 44D. | 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | |
| 49. | 1A-1460 | [17] | BOLT (1/2-13X2-IN) | |
| 50. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 51. | 108-0961 | [25] | SPACER (22X35X40-MM THK) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21880385
8W-9545: DIFFERENTIAL & BEVEL GEAR GP
8W-9545 DIFFERENTIAL & BEVEL GEAR GP
S/N 5RK1-12
PART OF 8X-9495 POWER TRAIN AR
S/N 5RK1-12
PART OF 8X-9495 POWER TRAIN AR
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-9544 Y | [1] | DIFFERENTIAL GP | |
| 2. | 5P-8248 | [66] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 3. | 2J-3506 | [50] | NUT-FULL (3/4-10-THD) | |
| 4. | 5D-6428 | [1] | SEAL-O-RING | |
| 5. | 0S-1587 | [12] | BOLT (1/2-13X1.75-IN) | |
| 6. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 2K-0337 | [16] | LOCKNUT (3/4-16-THD) | |
| 8. | 5T-5967 | [1] | CAGE-BEARING | |
| 9. | 5T-5970 | [1] | RING-ADJUSTMENT | |
| 10. | 6V-2702 | [1] | CONE-BEARING | |
| 11. | 2J-7137 | [1] | CUP-BEARING | |
| 12. | 5T-5921 | [2] | PLATE | |
| 13. | 2H-3932 | [1] | SEAL-O-RING | |
| 14. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 15. | 8M-3391 | [1] | COVER | |
| 16. | 9M-5874 B | [1] | SHIM PACK (INCLUDES 30-SHIMS) | |
| 17. | 7D-3504 | [24] | STUD-TAPERLOCK (3/4-10X3.39-IN) | |
| 18. | 2N-2189 | [1] | CONE-BEARING | |
| 19. | 2N-2188 | [1] | CUP-BEARING | |
| 20. | 5T-5966 | [1] | CAGE-BEARING | |
| 21. | 5T-5929 | [1] | RING-ADJUSTMENT | |
| 22. | 2M-3340 | [1] | SEAL-O-RING | |
| 23. | 3D-3295 | [1] | SEAL-O-RING | |
| 24. | 2B-9873 | [16] | BOLT-SPECIAL (3/4-16X3.15-IN) | |
| 25. | 6K-7917 | [2] | BOLT-LOCKING (1/2-13X1-IN) | |
| 26. | 5T-8684 | [1] | GEAR-DIFFERENTIAL RING (42-TEETH) | |
| 27. | 7D-3029 | [1] | PIN-THRUST | |
| 28. | 6V-0457 | [1] | CONE-BEARING | |
| 29. | 6V-0458 | [1] | CUP-BEARING | |
| 30. | 6V-0459 | [1] | CONE-BEARING | |
| 31. | 6V-0460 | [1] | CUP-BEARING | |
| 32. | 5T-3822 | [1] | RING | |
| 33. | 6D-3080 | [1] | SEAL | |
| 34. | 6G-6824 B | [10] | SHIM (.12MM THK) | |
| 35. | 6G-6825 B | [10] | SHIM (.18MM THK) | |
| 36. | 6G-6811 | [1] | CAGE AS-BEARING | |
| 37. | 5T-8812 | [1] | PINION AS (24-TEETH) | |
| 4B-4098 | [1] | PLUG-CUP | ||
| 38. | 5T-9058 | [1] | CARRIER AS-DIFFERENTIAL | |
| 4D-0537 | [2] | DOWEL | ||
| 39. | 8D-9512 | [4] | BOLT (1-1/8-7X7-IN) | |
| 40. | 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | |
| 41. | 3D-5692 | [4] | BUSHING-TERMINAL | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21880386
8W-9544: DIFFERENTIAL GP
8W-9544 DIFFERENTIAL GP
S/N 5RK1-15
PART OF 104-5349, 8W-9545 DIFFERENTIAL & BEVEL GEAR GP
S/N 5RK1-15
PART OF 104-5349, 8W-9545 DIFFERENTIAL & BEVEL GEAR GP
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-5184 | [2] | GEAR (20 TEETH) | |
| 2. | 3D-8513 | [2] | WASHER-THRUST (4.59X8.56X0.146-IN THK) | |
| 3. | 8W-9542 | [1] | HOUSING AS-DIFFERENTIAL | |
| 4. | 8T-0674 M | [8] | BOLT (M24X3X180-MM) | |
| 5. | 5T-5185 | [4] | PINION (16-TEETH) | |
| 6. | 5T-5223 | [1] | SPIDER | |
| 7. | 4D-7541 | [4] | RETAINER | |
| 8. | 8W-9541 | [1] | HOUSING AS-DIFFERENTIAL | |
| 9. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
| 10. | 4D-7534 | [4] | BEARING AS-ROLLER | |
| 11. | 107-2958 C | [4] | NUT (2-1/8-12-THD) | |
| 12. | 4D-7536 | [4] | LOCKNUT | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP21880387
8W-9544: DIFFERENTIAL GP
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-5184 | [2] | GEAR (20 TEETH) | |
| 2. | 7I-5876 C | [2] | WASHER-THRUST (3.71-MM THK) | |
| 3. | 4D-7536 | [4] | LOCKNUT | |
| 4. | 8T-0674 M | [8] | BOLT (M24X3X180-MM) | |
| 5. | 5T-5185 | [4] | PINION (16-TEETH) | |
| 6. | 5T-5223 | [1] | SPIDER | |
| 7. | 4D-7541 | [4] | RETAINER | |
| 8. | 107-2958 | [4] | NUT (2-1/8-12-THD) | |
| 9. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
| 10. | 4D-7534 | [4] | BEARING AS-ROLLER | |
| 11. | 130-6445 C | [1] | HOUSING AS-DIFFERENTIAL | |
| 12. | 8W-9487 | [4] | DOWEL (25X6.2-MM OD) | |
| 13. | 6K-1984 | [2] | DOWEL | |
| 14. | 2H-1190 | [2] | DOWEL | |
| 15. | 123-8502 C | [1] | HOUSING AS-DIFFERENTIAL | |
| 16. | 6K-1984 | [2] | DOWEL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP21880388
113-4329: DRIVE GP-FINAL
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-7058 | [1] | SHAFT (RH) | |
| 2. | 2A-7206 | [1] | SHAFT (LH) | |
| 3. | 7D-7705 | [2] | RING-RETAINING | |
| 4. | 6G-6375 | [2] | ADAPTER | |
| 5. | 117-1005 | [6] | GEAR-PLANETARY (29-TEETH) | |
| 6. | 174-3040 | [6] | BEARING AS | |
| (EACH INCLUDES CONES, CUPS, & SNAP RING) | ||||
| 7. | 5K-8454 | [12] | BOLT (1/2-13X1.12-IN) | |
| 8. | 5P-8245 | [54] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8W-3088 | [6] | PLATE | |
| 10. | 7I-5540 | [6] | SHAFT | |
| 11. | 6V-0439 | [2] | PLUG-MAGNETIC | |
| 12. | 8X-6829 | [8] | PLATE | |
| 13. | 0S-1589 | [16] | BOLT (5/8-11X1.75-IN) | |
| 14. | 5T-4024 | [2] | RING-RETAINING | |
| 15. | 8X-6830 | [8] | GEAR-PLANETARY (23-TEETH) | |
| 16. | 0S-1587 | [6] | BOLT (1/2-13X1.75-IN) | |
| 18. | 174-3041 | [8] | BEARING AS | |
| (EACH INCLUDES CONES, CUPS, SPACERS, & SNAP RING) | ||||
| 19. | 8W-6910 B | [6] | SHIM PACK (INCLUDES 10-SHIMS)(EACH INCLUDES 10 SHIMS) | |
| 20. | 2S-4078 | [2] | SEAL-O-RING | |
| 21. | 8X-6833 | [8] | SHAFT-PLANETARY | |
| 22. | 6G-6523 | [4] | WASHER-THRUST (234X289X9-MM THK) | |
| 23. | 6G-6374 | [2] | ADAPTER | |
| 24. | 0S-1585 | [16] | BOLT (1/2-13X1.5-IN) | |
| 25. | 8W-0159 | [2] | GEAR-SUN (36-TEETH) | |
| 26. | 113-9184 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 8B-1312 | [2] | DOWEL | ||
| 27. | 6D-1355 | [2] | SEAL-O-RING | |
| 28. | 2D-8154 | [24] | STUD-TAPERLOCK (1/2-13X2.36-IN) | |
| 29. | 1F-7958 | [24] | NUT-FULL (1/2-13-THD) | |
| 30. | 8X-6828 | [2] | CARRIER-PLANETARY | |
| 31. | 6V-6557 | [2] | SEAL-O-RING | |
| 32. | 6G-6319 | [2] | GEAR-RING (84-TEETH) | |
| 33. | 5T-7676 | [8] | RETAINER | |
| 34. | 8W-3046 | [2] | GEAR-RING (108-TEETH) | |
| 35. | 8W-3004 | [2] | CARRIER AS-INNER | |
| (EACH INCLUDES) | ||||
| 8B-1312 | [2] | DOWEL | ||
| 36. | 2G-4553 | [2] | PLATE | |
| 37. | 5D-0353 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 38. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 39. | 106-6532 | [2] | HUB | |
| 40. | 8W-3047 | [2] | GEAR-SUN (48-TEETH) | |
| 41. | 5T-6343 | [2] | BEARING | |
| 42. | 6B-5262 | [2] | PLUG | |
| 43. | 2A-3398 | [2] | GASKET | |
| 44. | 8X-6834 B | [8] | SHIM PACK (INCLUDES 12-SHIMS)(EACH INCLUDES 12 SHIMS) | |
| 45. | 5K-7143 | [8] | BOLT-SELF-LOCKING (1/2-13X1.5-IN) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP21880389
115-2970: DRIVE GP-FINAL
For full view, you need register
Parts for your 784B TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0439 | [1] | PLUG-MAGNETIC (FINAL DRIVE) | |
| 2. | 2S-4078 | [1] | SEAL-O-RING | |
| 3. | 7D-7705 | [1] | RING-RETAINING | |
| 4. | 6G-6375 | [1] | ADAPTER | |
| 5. | 117-1005 | [3] | GEAR-PLANETARY (29-TEETH) | |
| 6. | 174-3040 | [3] | BEARING AS | |
| 7. | 5K-8454 | [6] | BOLT (1/2-13X1.12-IN) | |
| 8. | 5P-8245 | [27] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8W-3088 | [3] | PLATE | |
| 10. | 7I-5540 | [3] | SHAFT | |
| 11. | 8W-6910 B | [3] | SHIM PACK (INCLUDES 10-SHIMS)(EACH CONTAINS 10 SHIMS) | |
| 12. | 5T-6343 | [1] | BEARING | |
| 13. | 6B-5262 | [1] | PLUG (FINAL DRIVE) | |
| 14. | 5T-4024 | [1] | RING-RETAINING | |
| 15. | 8X-6830 | [4] | GEAR-PLANETARY (23-TEETH) | |
| 16. | 0S-1587 | [3] | BOLT (1/2-13X1.75-IN) | |
| 18. | 174-3041 | [4] | BEARING AS | |
| 19. | 8X-6829 | [4] | PLATE | |
| 20. | 8X-6834 B | [4] | SHIM PACK (INCLUDES 12-SHIMS)(EACH CONTAINS 12 SHIMS) | |
| 21. | 8X-6833 | [4] | SHAFT-PLANETARY | |
| 22. | 6G-6523 | [2] | WASHER-THRUST (234X289X9-MM THK) | |
| 23. | 6G-6374 | [1] | ADAPTER | |
| 24. | 0S-1585 | [8] | BOLT (1/2-13X1.5-IN) | |
| 25. | 8W-0159 | [1] | GEAR-SUN (36-TEETH) | |
| 26. | 113-9184 | [1] | COVER AS | |
| 8B-1312 | [2] | DOWEL | ||
| 27. | 6D-1355 | [1] | SEAL-O-RING | |
| 28. | 2D-8154 | [12] | STUD-TAPERLOCK (1/2-13X2.36-IN) | |
| 29. | 1F-7958 | [12] | NUT-FULL (1/2-13-THD) | |
| 30. | 8X-6828 | [1] | CARRIER-PLANETARY | |
| 31. | 6V-6557 | [1] | SEAL-O-RING | |
| 32. | 6G-6319 | [1] | GEAR-RING (84-TEETH) | |
| 33. | 5T-7676 | [4] | RETAINER | |
| 34. | 8W-3046 | [1] | GEAR-RING (108-TEETH) | |
| 35. | 8W-3004 | [1] | CARRIER AS-INNER | |
| 8B-1312 | [2] | DOWEL | ||
| 36. | 2G-4553 | [1] | PLATE | |
| 37. | 5D-0353 | [4] | BOLT-LOCKING (3/8-16X1-IN) | |
| 38. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 39. | 106-6532 | [1] | HUB | |
| 40. | 8W-3047 | [1] | GEAR-SUN (48-TEETH) | |
| 41. | 5K-7143 | [4] | BOLT-SELF-LOCKING (1/2-13X1.5-IN) | |
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
