AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

793B Off-Highway Truck 1HL00001-UP (MACHINE) POWERED BY 3516 Engine FUEL SYSTEM Caterpillar SIS



TRUCK 793B TRUCK 1HL
 793B Off-Highway Truck 1HL00001-UP (MACHINE) POWERED BY 3516 Engine SEBP2191 793B 1HL   (1992)

Parts group 793B:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
VALVE GP-SOLENOID
144-6292 VALVE GP-SOLENOID
144-6292 VALVE GP-SOLENOID
S/N 6LE1-585
24-VOLT
FIELD REPLACEMENT ORDER @@@@@302-3809@@@@@
FIELD REPLACEMENT FOR @@@@@ 7X-1120@@@@@
FIELD INSTALLATION
VALVE GP-SOLENOID
149-2658 VALVE GP-SOLENOID
149-2658 VALVE GP-SOLENOID
S/N 1HL1-UP
FIELD INSTALLATION
VALVE GP-SOLENOID
189-8657 VALVE GP-SOLENOID
189-8657 VALVE GP-SOLENOID
S/N 2PK1-UP
FIELD REPLACEMENT FOR @@@@@109-4591@@@@@
VALVE GP-SOLENOID
189-8666 VALVE GP-SOLENOID
189-8666 VALVE GP-SOLENOID
S/N 1HL1-UP
PART OF 217-7906 VALVE & MTG GP-BRAKE
FIELD REPLACEMENT FOR @@@@@ 3E-8691@@@@@
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
7W-5397 DRIVE GP-TACHOMETER
7W-5397 DRIVE GP-TACHOMETER
S/N 1HL1-UP
PART OF 2A-6687 TACHOGRAPH AR
AN ATTACHMENT
FILTER GP-FUEL
FILTER GP-FUEL
6I-4469 FILTER GP-FUEL
6I-4469 FILTER GP-FUEL
S/N 2PK1-1603
PART OF 121-5793, 155-0530, 155-0538, 7E-6499 ENGINE AR
FILTER GP-PRIMARY FUEL
7E-6719 FILTER GP-PRIMARY FUEL
7E-6719 FILTER GP-PRIMARY FUEL
S/N 1HL1-194
PART OF 8X-4546 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
HEATER GP-FUEL
HEATER GP-FUEL
8X-0193 HEATER GP-FUEL
8X-0193 HEATER GP-FUEL
S/N 1HL1-UP
AN ATTACHMENT
KIT-SEAL
KIT-SEAL
353-5995 KIT-SEAL
353-5995 KIT-SEAL -SINGLE CYLINDER LINER
S/N 1HL1-UP
FIELD INSTALLATION
476-2738 KIT-SEAL
476-2738 KIT-SEAL
S/N 1HL1-UP
EXHAUST BYPASS
FOR USE WITH @@@@@189-8666@@@@@
FIELD INSTALLATION
LINES GP-FUEL
FASTENER GP-FUEL INJ LINES
454-3723 FASTENER GP-FUEL INJ LINES
454-3723 FASTENER GP-FUEL INJ LINES
S/N 2PK1721-UP
PART OF 155-0530 ENGINE AR
LINES GP-FUEL
8X-0206 LINES GP-FUEL
8X-0206 LINES GP-FUEL
S/N 1HL1-UP
PART OF 2A-6545 CHASSIS AR
LINES GP-FUEL FILTER
8X-4546 LINES GP-FUEL FILTER
8X-4546 LINES GP-FUEL FILTER
S/N 1HL1-194
PART OF 115-8148, 131-7953, 131-7954, 8X-4545 TANK & FILTER AR-FUEL
ALSO AN ATTACHMENT
MANIFOLD GP-FUEL
156-9755 MANIFOLD GP-FUEL
156-9755 MANIFOLD GP-FUEL -RH
S/N 2PK1599-1603
PART OF 454-3722, 7E-6503 LINES GP-FUEL INJECTION
MANIFOLD GP-FUEL
156-9756 MANIFOLD GP-FUEL
156-9756 MANIFOLD GP-FUEL -LH
S/N 2PK1599-1603
PART OF 454-3722, 7E-6503 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
FASTENER GP-FUEL INJ LINES
454-3723 FASTENER GP-FUEL INJ LINES
454-3723 FASTENER GP-FUEL INJ LINES
S/N 2PK1721-UP
PART OF 155-0530 ENGINE AR
INJECTOR GP-FUEL
100-6746 INJECTOR GP-FUEL
100-6746 INJECTOR GP-FUEL
S/N 2PK1-1600
PART OF 100-5794 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
454-3722 LINES GP-FUEL INJECTION
454-3722 LINES GP-FUEL INJECTION
S/N 2PK1721-UP
PART OF 155-0530 ENGINE AR
LINES GP-FUEL INJECTION
7E-6503 LINES GP-FUEL INJECTION
7E-6503 LINES GP-FUEL INJECTION
S/N 2PK1-449
PART OF 7E-6499 ENGINE AR
LINES GP-FUEL INJECTION
7E-6503 LINES GP-FUEL INJECTION
7E-6503 LINES GP-FUEL INJECTION
S/N 2PK450-1598
PART OF 121-5793, 7E-6499 ENGINE AR
LINES GP-FUEL INJECTION
7E-6503 LINES GP-FUEL INJECTION
7E-6503 LINES GP-FUEL INJECTION
S/N 2PK1599-1603
PART OF 121-5793, 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
100-6746 INJECTOR GP-FUEL
100-6746 INJECTOR GP-FUEL
S/N 2PK1-1600
PART OF 100-5794 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
S/N 2PK1-1600
PART OF 121-5793, 7E-6499 ENGINE AR
PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
S/N 2PK1601-1603
PART OF 121-5793, 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
S/N 2PK1613-1620
PART OF 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
S/N 2PK1621-1625
PART OF 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
S/N 2PK1626-1702
PART OF 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
S/N 2PK1703-1713
PART OF 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
100-5794 PUMP GP-FUEL INJECTION
S/N 2PK1714-UP
PART OF 155-0530, 155-0538 ENGINE AR, 454-6567 MODIFICATION AR-ENGINE
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
165-9154 PUMP GP-FUEL PRIMING
165-9154 PUMP GP-FUEL PRIMING -MANUAL
S/N 2PK1604-UP
PART OF 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL PRIMING
449-7082 PUMP GP-FUEL PRIMING
449-7082 PUMP GP-FUEL PRIMING
S/N 2PK1721-UP
PART OF 155-0530 ENGINE AR
PUMP GP-FUEL PRIMING
8N-7763 PUMP GP-FUEL PRIMING
8N-7763 PUMP GP-FUEL PRIMING
S/N 2PK1-UP
PART OF 121-5793, 7E-6499 ENGINE AR
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
169-8615 PUMP GP-FUEL TRANSFER
169-8615 PUMP GP-FUEL TRANSFER
S/N 2PK1596-1603
ONE SECTION GEAR
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
S/N 2PK1-1595
ONE SECTION GEAR
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
225-4260 PUMP GP-FUEL TRANSFER
225-4260 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1618-1625
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
282-8409 PUMP GP-FUEL TRANSFER
282-8409 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1628-1640
PART OF 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL TRANSFER
282-8409 PUMP GP-FUEL TRANSFER
282-8409 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1641-UP
PART OF 155-0530, 155-0538 ENGINE AR
282-8410 PUMP GP-FUEL TRANSFER
282-8410 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1628-1640
PART OF 282-8409 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
313-7770 PUMP GP-FUEL TRANSFER
313-7770 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1626-1627
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
322-3830 PUMP GP-FUEL TRANSFER
322-3830 PUMP GP-FUEL TRANSFER
S/N 2PK1641-UP
PART OF 282-8409 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1-1595
PART OF 121-5793, 7E-6499 ENGINE AR
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1596-1603
PART OF 121-5793, 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1618-1625
PART OF 155-0530, 155-0538 ENGINE AR
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 2PK1626-1627
PART OF 155-0530, 155-0538 ENGINE AR
TANK GP-FUEL
FASTENER GP-FUEL TANK
8X-2570 FASTENER GP-FUEL TANK
8X-2570 FASTENER GP-FUEL TANK
S/N 1HL1-194
3790 L (1000 GAL)
PART OF 2A-6535 INSTALLATION AR-TRUCK, 131-7953, 8X-4545 TANK & FILTER AR-FUEL
ALSO AN ATTACHMENT
MOUNTING GP-FUEL TANK
115-7665 MOUNTING GP-FUEL TANK
115-7665 MOUNTING GP-FUEL TANK
S/N 1HL195-UP
4730 L (1250 GAL)
PART OF 115-8148, 131-7954 TANK & FILTER AR-FUEL
AN ATTACHMENT
115-8148 TANK & FILTER AR-FUEL
115-8148 TANK & FILTER AR-FUEL
S/N 1HL195-407
4730 L(1250 GALLON)
REPLACED BY @@@@@131-7954@@@@@
AN ATTACHMENT
131-7953 TANK & FILTER AR-FUEL
131-7953 TANK & FILTER AR-FUEL
S/N 1HL408-UP
3790 L (1000 GAL)
CANNOT BE USED WITH 90 SERIES TIRES
AN ATTACHMENT
131-7954 TANK & FILTER AR-FUEL
131-7954 TANK & FILTER AR-FUEL
S/N 1HL408-UP
4730 L (1250 GAL)
CANNOT BE USED WITH 90 SERIES TIRES
AN ATTACHMENT
8X-4545 TANK & FILTER AR-FUEL
8X-4545 TANK & FILTER AR-FUEL
S/N 1HL1-194
3790 L(1000 GALLON)
PART OF 8X-9793 COMMON AR
REPLACED BY @@@@@131-7953@@@@@
ALSO AN ATTACHMENT
TANK GP-FUEL
113-9338 TANK GP-FUEL
113-9338 TANK GP-FUEL
S/N 1HL167-194
3790 L(1000 GALLON)
PART OF 8X-4545 TANK & FILTER AR-FUEL
ALSO AN ATTACHMENT
TANK GP-FUEL
115-7667 TANK GP-FUEL
115-7667 TANK GP-FUEL
S/N 1HL195-407
4730 L(1250 GALLON)
PART OF 115-8148 TANK & FILTER AR-FUEL
AN ATTACHMENT
TANK GP-FUEL
131-7955 TANK GP-FUEL
131-7955 TANK GP-FUEL
S/N 1HL408-UP
3790 L (1000 GAL)
PART OF 131-7953 TANK & FILTER AR-FUEL
AN ATTACHMENT
TANK GP-FUEL
131-7956 TANK GP-FUEL
131-7956 TANK GP-FUEL
S/N 1HL408-UP
4730 L (1250 GAL)
PART OF 131-7954 TANK & FILTER AR-FUEL
AN ATTACHMENT
TANK GP-FUEL
8X-0267 TANK GP-FUEL
8X-0267 TANK GP-FUEL
S/N 1HL1-166
3790 L(1000 GALLON)
PART OF 8X-4545 TANK & FILTER AR-FUEL
VALVE AS-TANK
2G-9000 VALVE AS-TANK
2G-9000 VALVE AS-TANK -FAST FILL FUEL
S/N 1HL1-194
PART OF 113-9338, 115-7667, 131-7955, 131-7956, 8X-0267 TANK GP-FUEL
ALSO AN ATTACHMENT
VALVE GP
VALVE AS-TANK
2G-9000 VALVE AS-TANK
2G-9000 VALVE AS-TANK -FAST FILL FUEL
S/N 1HL1-194
PART OF 113-9338, 115-7667, 131-7955, 131-7956, 8X-0267 TANK GP-FUEL
ALSO AN ATTACHMENT
VALVE GP-SOLENOID
VALVE GP-SOLENOID
144-6292 VALVE GP-SOLENOID
144-6292 VALVE GP-SOLENOID
S/N 6LE1-585
24-VOLT
FIELD REPLACEMENT ORDER @@@@@302-3809@@@@@
FIELD REPLACEMENT FOR @@@@@ 7X-1120@@@@@
FIELD INSTALLATION
VALVE GP-SOLENOID
149-2658 VALVE GP-SOLENOID
149-2658 VALVE GP-SOLENOID
S/N 1HL1-UP
FIELD INSTALLATION
VALVE GP-SOLENOID
189-8657 VALVE GP-SOLENOID
189-8657 VALVE GP-SOLENOID
S/N 2PK1-UP
FIELD REPLACEMENT FOR @@@@@109-4591@@@@@
VALVE GP-SOLENOID
189-8666 VALVE GP-SOLENOID
189-8666 VALVE GP-SOLENOID
S/N 1HL1-UP
PART OF 217-7906 VALVE & MTG GP-BRAKE
FIELD REPLACEMENT FOR @@@@@ 3E-8691@@@@@

Information:

(For parts list, see above)

Service Letter-NACD
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Additional Clip In Fuel Injection Lines Groups Helps Secure Advanced Diesel Engine Management (ADEM) I Electronic Control Module (ECM) Fuel Cooling Hose{1252}
1998/04/20
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Letter-NACD
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Testing and Adjusting
Fuel Ratio Control
3512 and 3516 EUI Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Accelerator Control
793B Off-Highway Truck
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Accelerator Control
793B Off-Highway Truck Power Train
Service Letter-China
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
Service Letter-Asia
Service Letter-APD
Service Magazine
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Drain Water And Sediment From The Fuel Tank Daily {1273}
1999/06/21
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Secondary Filter - Replace
793B Off-Highway Truck
Fuel System - Prime
793B Off-Highway Truck
Fuel System Primary Filter - Clean
793B Off-Highway Truck
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Rework Instructions for the Fuel Priming Pump Group and Check Valves on Certain 3500 Machine Engines{1256, 1258, 1260, 1261, 1263}
Rework Instructions for the Fuel Priming Pump Group and Check Valves on Certain 3500 Machine Engines{1256, 1258, 1260, 1261, 1263}
Service Letter-NACD
New Fuel Filter Assembly For 3516 Engines Used In 5230 Excavators And 3516 Remanufactured Engines
New Fuel Filter Assembly For 3516 Engines Used In 5230 Excavators And 3516 Remanufactured Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fuel Filter Differential Pressure Switch
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Fuel Filter (Primary)
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Fuel Filter Base
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
New Fuel Filter Assembly For 3516 Engines Used In 5230 Excavators And 3516 Remanufactured Engines
New Fuel Filter Assembly For 3516 Engines Used In 5230 Excavators And 3516 Remanufactured Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Filter Base
SUPPLEMENT FOR 793B TRUCK ENGINE
Fuel Filter Base
3512 AND 3516 EUI ENGINES
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New High Efficiency Secondary Fuel Filter Assembly Improves Injector Life On 3500 Engines With EUI Injectors {1261}
1996/08/12
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
New Filter Switch For 3500B Fuel Filter Application {1261, 1435}
2006/01/02
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instructions Are Available for Certain 3500 Machine Engines to Address Low Fuel Pressure and Related Issues {1256, 1258, 1260, 1261, 1263}
2014/04/03
Technical Information Bulletin
2G-9000 RECEIVER USED IN THE WIGGINS FUEL SYSTEM MAY NOT FUCNTION PROPERLY
2G-9000 RECEIVER USED IN THE WIGGINS FUEL SYSTEM MAY NOT FUCNTION PROPERLY
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Technical Information Bulletin
Certain Cat<SUP>&reg;</SUP> Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/11/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
SUPPLEMENT FOR 793B TRUCK ENGINE
Fuel Transfer Pump
3512 AND 3516 EUI ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/10/24
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Field Service Kit Available For Leaking Fuel Heater {1296}
1997/06/16
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Technical Information Bulletin
Certain Cat<SUP>&reg;</SUP> Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Service Magazine
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-Asia
Service Letter-APD
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
New Speed/Timing Sensor Provides Parts Commonality For Electronic Unit Injector (EUI) Engines{1907}
1994/11/21
New Tube Assemblies Used In Fuel Lines Groups{1274}
1995/01/16
New High Efficiency Secondary Fuel Filter Assembly Improves Injector Life On 3500 Engines With EUI Injectors {1261}
1996/08/12
New Harness Assembly For 3500 Electronic Unit Injector (EUI) Engines And 3500B Engines {1408}
1997/03/03
Field Service Kit Available For Leaking Fuel Heater {1296}
1997/06/16
Additional Clip In Fuel Injection Lines Groups Helps Secure Advanced Diesel Engine Management (ADEM) I Electronic Control Module (ECM) Fuel Cooling Hose{1252}
1998/04/20
Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/06/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14
Drain Water And Sediment From The Fuel Tank Daily {1273}
1999/06/21
Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30
Locations Where New Tube Assemblies Are Used {1274}
2000/01/03
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Anti-Splash Tape is Available for use with Current Fuel Line Shield Groups used on 3500 Machine Engines {1067, 1252}
2013/01/31
Engine News
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Service Letter-Australia
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Service Letter-CFEL
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Service Letter-CSARL
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Service Letter-Americas
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Service Letter-Brazil
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Specifications
Fuel Pressure Regulator
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Service Letter-China
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Service Letter-Asia
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING 3516 ENGINES IN CERTAIN 793, 793B, 793C, AND 793D OFF-HIGHWAY TRUCKS
Disassembly and Assembly
Unit Injectors
SUPPLEMENT FOR 793B TRUCK ENGINE
Unit Injectors
3512 AND 3516 EUI ENGINES
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Disassemble Electronic Unit Injectors{1290,1250}
1993/09/06
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
New Plunger In Fuel Pressure Regulating Valve{1250}
1994/09/05
New Speed/Timing Sensor Provides Parts Commonality For Electronic Unit Injector (EUI) Engines{1907}
1994/11/21
Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/07
New Harness Assembly For 3500 Electronic Unit Injector (EUI) Engines And 3500B Engines {1408}
1997/03/03
Additional Clip In Fuel Injection Lines Groups Helps Secure Advanced Diesel Engine Management (ADEM) I Electronic Control Module (ECM) Fuel Cooling Hose{1252}
1998/04/20
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/06/22
Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14
Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/11/10
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Anti-Splash Tape is Available for use with Current Fuel Line Shield Groups used on 3500 Machine Engines {1067, 1252}
2013/01/31
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Operation and Maintenance Manual
Fuel Recommendations
793B Off-Highway Truck
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Service Letter-NACD
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Systems Operation
Fuel System Operation
3512 and 3516 EUI Engines for Caterpillar Built Machines
Service Letter-APD
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Service Tool List For 3508 (7YG), 3512 (4WJ), And 3516 (2PK) Machine Engines Equipped With Electronic Unit Injection (EUI){0782}
1993/07/19
New Speed Sensors Available{1907,1900,7462}
1993/08/30
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/10/24
New Speed/Timing Sensor Provides Parts Commonality For Electronic Unit Injector (EUI) Engines{1907}
1994/11/21
New Tube Assemblies Used In Fuel Lines Groups{1274}
1995/01/16
Corrected Altitude Deration Chart {1923,1902}
1995/05/08
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Unit Injectors
SUPPLEMENT FOR 793B TRUCK ENGINE
Unit Injectors
3512 AND 3516 EUI ENGINES
Service Magazine
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Service Tool List For 3508 (7YG), 3512 (4WJ), And 3516 (2PK) Machine Engines Equipped With Electronic Unit Injection (EUI){0782}
1993/07/19
Do Not Disassemble Electronic Unit Injectors{1290,1250}
1993/09/06
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
New Speed/Timing Sensor Provides Parts Commonality For Electronic Unit Injector (EUI) Engines{1907}
1994/11/21
Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/07
New Harness Assembly For 3500 Electronic Unit Injector (EUI) Engines And 3500B Engines {1408}
1997/03/03
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/06/22
Engine Cylinder Head Exhaust Port Thermocouples No Longer Available On Remanufactured 3500 With Electronic Unit Injection (EUI) And 3500B Engines {7498}
1998/11/30
Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14
Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Certain Cat<SUP>&reg;</SUP> Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
New High Efficiency Secondary Fuel Filter Assembly Improves Injector Life On 3500 Engines With EUI Injectors {1261}
1996/08/12
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/06/22
Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14
Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Performing a Multiple Cylinder Cutout Test {1290}
Performing a Multiple Cylinder Cutout Test {1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Certain Cat<SUP>&reg;</SUP> Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Specifications
Fuel Injector Mechanism
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Fuel Injector
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-Asia
Systems Operation
Fuel Injector
3512 and 3516 EUI Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Testing and Adjusting
Checking and Calibrating Electronic Injection Timing with the Electronic Service Tool
3512 and 3516 EUI Engines for Caterpillar Built Machines
Fuel Injector Adjustment
3512 and 3516 EUI Engines for Caterpillar Built Machines
Checking Engine Cylinders
3512 and 3516 EUI Engines for Caterpillar Built Machines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3512 and 3516 EUI Engines for Caterpillar Built Machines
Troubleshooting
MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0003 - FMI 06 Injector Cylinder 3 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0004 - FMI 05 Injector Cylinder 4 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0004 - FMI 06 Injector Cylinder 4 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0005 - FMI 05 Injector Cylinder 5 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0005 - FMI 06 Injector Cylinder 5 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0006 - FMI 05 Injector Cylinder 6 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0006 - FMI 06 Injector Cylinder 6 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0007 - FMI 05 Injector Cylinder 7 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0007 - FMI 06 Injector Cylinder 7 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0008 - FMI 05 Injector Cylinder 8 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0008 - FMI 06 Injector Cylinder 8 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0009 - FMI 06 Injector Cylinder 9 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0013 - FMI 05 Injector Cylinder 13 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0013 - FMI 06 Injector Cylinder 13 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0014 - FMI 05 Injector Cylinder 14 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0014 - FMI 06 Injector Cylinder 14 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0015 - FMI 06 Injector Cylinder 15 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0015 - FMI 05 Injector Cylinder 15 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0016 - FMI 06 Injector Cylinder 16 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0016 - FMI 05 Injector Cylinder 16 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
Noise Coming from Cylinder
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0009 - FMI 05 Injector Cylinder 9 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0010 - FMI 05 Injector Cylinder 10 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0010 - FMI 06 Injector Cylinder 10 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0011 - FMI 05 Injector Cylinder 11 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0011 - FMI 06 Injector Cylinder 11 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0012 - FMI 05 Injector Cylinder 12 open circuit
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
MID 036 - CID 0012 - FMI 06 Injector Cylinder 12 short
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
Injector Solenoids
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks
Disassembly and Assembly
Fuel Transfer Pump
SUPPLEMENT FOR 793B TRUCK ENGINE
Unit Injectors
SUPPLEMENT FOR 793B TRUCK ENGINE
Fuel Transfer Pump
3512 AND 3516 EUI ENGINES
Unit Injectors
3512 AND 3516 EUI ENGINES
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Service Tool List For 3508 (7YG), 3512 (4WJ), And 3516 (2PK) Machine Engines Equipped With Electronic Unit Injection (EUI){0782}
1993/07/19
Do Not Disassemble Electronic Unit Injectors{1290,1250}
1993/09/06
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/10/24
New Speed/Timing Sensor Provides Parts Commonality For Electronic Unit Injector (EUI) Engines{1907}
1994/11/21
Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/07
New Harness Assembly For 3500 Electronic Unit Injector (EUI) Engines And 3500B Engines {1408}
1997/03/03
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/06/22
Engine Cylinder Head Exhaust Port Thermocouples No Longer Available On Remanufactured 3500 With Electronic Unit Injection (EUI) And 3500B Engines {7498}
1998/11/30
Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14
Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30
Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
2001/06/18
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Service Life of Unit Injectors {1251, 1290}
2006/12/25
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
The 6V-4022 Fuel Injector Tester should not be Used to Check Unit Injectors for Leaks {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
2012/12/21
New Engine Software and Fuel Injectors Improves Cylinder Performance for all 3516 HD Engines {1251, 1290, 1901, 1920}
2013/01/28
Cat<SUP>&reg;</SUP> Reman Is Announcing an Appearance Change to the EI550 Classic, Bridge, and ACERT Electronic Unit Injectors for Certain Machine Engines {1290}
2015/06/04
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Operation and Maintenance Manual
Fuel System - Prime
793B Off-Highway Truck
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Rework Instructions for the Fuel Priming Pump Group and Check Valves on Certain 3500 Machine Engines{1256, 1258, 1260, 1261, 1263}
Rework Instructions for the Fuel Priming Pump Group and Check Valves on Certain 3500 Machine Engines{1256, 1258, 1260, 1261, 1263}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Disassembly and Assembly
Fuel Priming Pump
SUPPLEMENT FOR 793B TRUCK ENGINE
Fuel Priming Pump
3512 AND 3516 EUI ENGINES
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/10/24
New Fuel Priming Pump Assembly Used {1258}
1999/03/15
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Special Instructions Are Available for Certain 3500 Machine Engines to Address Low Fuel Pressure and Related Issues {1256, 1258, 1260, 1261, 1263}
2014/04/03
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Rework Instructions for the Fuel Priming Pump Group and Check Valves on Certain 3500 Machine Engines{1256, 1258, 1260, 1261, 1263}
Rework Instructions for the Fuel Priming Pump Group and Check Valves on Certain 3500 Machine Engines{1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Transfer Pump
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel Pressure
3512 and 3516 EUI Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Transfer Pump
SUPPLEMENT FOR 793B TRUCK ENGINE
Fuel Transfer Pump
3512 AND 3516 EUI ENGINES
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/10/24
New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/03/08
New Fuel Priming Pump Assembly Used {1258}
1999/03/15
A New Fuel Transfer Pump Group Is Used {1256}
2002/11/04
A New Fuel Transfer Pump is Used {1256}
2004/10/04
New Fuel Transfer Pump {1256}
2005/09/26
New Fuel Transfer Pump {1256}
2006/05/22
Special Instructions Are Available for Certain 3500 Machine Engines to Address Low Fuel Pressure and Related Issues {1256, 1258, 1260, 1261, 1263}
2014/04/03
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Service Magazine
Service Life of Unit Injectors {1251, 1290}
2006/12/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Service Letter-NACD
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Operation and Maintenance Manual
Fuel Tank Cap and Strainer - Clean
793B Off-Highway Truck
Fuel Tank Water and Sediment - Drain
793B Off-Highway Truck
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Technical Information Bulletin
2G-9000 RECEIVER USED IN THE WIGGINS FUEL SYSTEM MAY NOT FUCNTION PROPERLY
2G-9000 RECEIVER USED IN THE WIGGINS FUEL SYSTEM MAY NOT FUCNTION PROPERLY
Fuel Tank Mounts Interfere with Fuel Tank on Certain 793B and 793C Off-Highway Trucks {0679, 1273, 7051}
Fuel Tank Mounts Interfere with Fuel Tank on Certain 793B and 793C Off-Highway Trucks {0679, 1273, 7051}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Testing and Adjusting
CID 0096 FMI 03 Level Sensor (Fuel) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS)
CID 0096 FMI 04 Level Sensor (Fuel) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS)
CID 0096 FMI 06 Level Sensor (Fuel) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS)
Troubleshooting
MID 049 - CID 0096 - FMI 03
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™
MID 049 - CID 0096 - FMI 04
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™
MID 049 - CID 0096 - FMI 08
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™
Disassembly and Assembly
Fuel Tank
793B TRUCK MACHINE SYSTEMS
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
External Fuel Tank Wear And Corrosion Can Be Prevented{1273}
1994/08/08
Air Filter Used In Fast Fill Service Center Groups To Decrease Contamination In Fuel {7513,1273}
1998/01/26
Drain Water And Sediment From The Fuel Tank Daily {1273}
1999/06/21
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2014/12/03
Conversion Kits are Available to Convert Caterpillar or Wiggins Fast Fuel System Threaded Receivers to Caterpillar Flange Mounted Receivers {1710}
2004/03/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
New Electronic Control Group (Engine Coolant Temperature Sensor) Used{1906}
1995/05/08
Engine Cylinder Head Exhaust Port Thermocouples No Longer Available On Remanufactured 3500 With Electronic Unit Injection (EUI) And 3500B Engines {7498}
1998/11/30
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Service Tool List For 3508 (7YG), 3512 (4WJ), And 3516 (2PK) Machine Engines Equipped With Electronic Unit Injection (EUI){0782}
1993/07/19
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/04
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04
New Check Valve Used With Higher Temperature Capacity{1063,1355}
1994/03/28
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/07
Improved Solenoid Valve Group Used In ICM And Planetary Transmissions For Increased Reliability And Longer Service Life{3030}
1998/03/16
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Truck sale:

Caterpillar 793B, Construction
90,000 
Caterpillar 793B, Construction
- Articulated Dump Trucks (ADTs)
FINNING CHILE S.A.
Chile
1994 CAT 793B
USD $90,000 
1994 CAT 793B

Finning Chile S.A
SANTIAGO, ??, Chile
1994 CAT 793B
USD $115,000 
1994 CAT 793B

Finning Chile S.A
SANTIAGO, ??, Chile
 
 
CATERPILLAR 793B 1997
- OFF HIGHWAY TRUCKS
HASTINGS DEERING (AUSTRALIA) LTD.
CATERPILLAR 793B 1994
 
CATERPILLAR 793B 1994
- OFF HIGHWAY TRUCKS
FINNING CHILE S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.