FRAME AND BODY
LUBRICATION GPBODY GP-TRUCK
LADDER GP
SUSPENSION GP
FRAME AND BODY
LUBRICATION GP
#SEBP21920920
5T-7800: PUMP GP-LUBRICATION
5T-7800 PUMP GP-LUBRICATION -AUTOMATIC
S/N 7EK1-UP
PART OF 8W-4594 PUMP GP-LUBRICATION
S/N 7EK1-UP
PART OF 8W-4594 PUMP GP-LUBRICATION
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-2320 | [1] | VALVE AS-VENT (LUBRICATION PUMP) | |
| 8X-2319 | [1] | SEAL-U-CUP | ||
| 8X-3315 | [1] | PACKING | ||
| 2. | 8X-2323 | [1] | UNLOADER | |
| 3. | 9X-2474 | [1] | ADAPTER | |
| 4. | 8W-8564 I | [1] | HOSE AS | |
| 5. | 3B-6768 | [1] | BUSHING-REDUCER | |
| 6. | 4M-8973 | [1] | ELBOW | |
| 7. | 031-9746 | [1] | ELBOW | |
| 8. | 8C-8771 | [1] | FITTING-PRESSURE RELIEF | |
| 9. | 5P-5461 | [1] | NUT (1/8-27-THD) | |
| 10. | 8X-2324 | [1] | ELBOW | |
| 11. | 3B-6489 | [1] | COUPLING-PIPE | |
| 12. | 8X-2318 | [1] | GASKET | |
| 13. | 8W-8563 | [1] | HOSE AS | |
| 14. | 8X-2321 | [1] | VALVE GP-CHECK | |
| 3B-1925 | [1] | WASHER (0.766X1X0.064-IN THK) | ||
| 7W-3556 | [1] | WASHER (14.27X20.57X1.5-MM THK) | ||
| 15. | 8X-3316 | [1] | FITTING | |
| 16. | 8X-2317 J | [1] | PUMP AS (LUBRICATION) | |
| 17. | 105-2051 | [1] | BRACKET | |
| 18. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 19. | 006-0210 | [1] | TEE-PIPE | |
| 20. | 4M-5317 | [1] | BUSHING-REDUCER | |
| 21. | 5P-8998 | [1] | FITTING | |
| 22. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 4M-0061 | [2] | BOLT (5/16-18X0.75-IN) | |
| 24. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 25. | 124-4241 | [1] | PLATE | |
| 26. | 129-3228 | [1] | FOLLOWER AS | |
| 27. | 140-3538 | [1] | CONTAINER | |
| 28. | 163-0900 | [1] | GASKET-COVER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8X-2325 J | [1] | KIT-PUMP (LUBRICATION) | ||
| (INCLUDES O-RINGS, GASKETS, RODS, SPRINGS, PINS, PACKINGS, U-CUP, PLUNGER, BALLS, CHECK SEAT & WASHER) | ||||
| 8X-2326 J | [1] | KIT-TUBE (LUBRICATION PUMP)(LUBRICATION PUMP) | ||
| (INCLUDES CHECK SEAT, BALLS, PACKING, GASKET, ROD, PLUNGER & WASHER) | ||||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | KIT(S) MARKED J AVAILABLE FOR PART MARKED J | |||
#SEBP21920921
8W-4594: PUMP GP-LUBRICATION
8W-4594 PUMP GP-LUBRICATION -AUTOMATIC
S/N 7EK1-UP
PART OF 8X-8270 LUBRICATION GP-AUTOMATIC
S/N 7EK1-UP
PART OF 8X-8270 LUBRICATION GP-AUTOMATIC
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-7800 Y | [1] | PUMP GP-LUBRICATION (AUTO LUBE SYSTEM) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21920922
7I-4798: SIDEBOARD AS-BODY
7I-4798 SIDEBOARD AS-BODY
S/N 7EK1-UP
120.3 CUBIC METERS (156.4 CUBIC YARDS). INCREASED BODY CAPACITY
AN ATTACHMENT
S/N 7EK1-UP
120.3 CUBIC METERS (156.4 CUBIC YARDS). INCREASED BODY CAPACITY
AN ATTACHMENT
For full view, you need register
#SEBP21920923
118-0228: SIDEWALL CAP AS-BODY
118-0228 SIDEWALL CAP AS-BODY
S/N 7EK1-UP
PROVIDES ADDITIONAL SIDEWALL PROTECTION FOR BODY
CANNOT BE USED WITH SIDEBOARD ASSEMBLY
AN ATTACHMENT
S/N 7EK1-UP
PROVIDES ADDITIONAL SIDEWALL PROTECTION FOR BODY
CANNOT BE USED WITH SIDEBOARD ASSEMBLY
AN ATTACHMENT
For full view, you need register
#SEBP21920924
353-2781: STAIRWAY GP
353-2781 STAIRWAY GP
S/N 7EK1-UP
FOR USE WITH REHS2672 - INSTALLATION PROCEDURE OF LADDER GROUP & WALKWAY GROUP FIELD UPGRADE KIT FOR, 789B & 789C OFF-HIGHWAY TRUCK (7EK1-UP, 2BW1-UP)
FIELD INSTALLATION
S/N 7EK1-UP
FOR USE WITH REHS2672 - INSTALLATION PROCEDURE OF LADDER GROUP & WALKWAY GROUP FIELD UPGRADE KIT FOR, 789B & 789C OFF-HIGHWAY TRUCK (7EK1-UP, 2BW1-UP)
FIELD INSTALLATION
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS#SEBP21920925
5T-4465: SUSPENSION & MTG GP-FRONT
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4639 | [8] | BOLT (1-8X4-IN) | |
| 2. | 5P-8250 | [38] | WASHER (28X49X5-MM THK) | |
| 3. | 5M-6214 C | [2] | PLUG (1/8-27 PTF) | |
| 4. | 6V-3249 | [2] | BEARING | |
| 5. | 5T-5202 | [2] | CAP | |
| 6. | 6V-0836 | [2] | RING-RETAINING | |
| 7. | 4T-5182 Y | [2] | SUSPENSION GP-FRONT | |
| 8. | 5P-5769 | [24] | BOLT (1-1/4-12X7-IN) | |
| 5T-1352 | [24] | SPACER (34X55X12-MM THK) | ||
| 7H-7539 | [24] | NUT-FULL (1-1/4-12-THD) | ||
| 4K-0684 | [24] | WASHER-HARD (34X55X6-MM THK) | ||
| 9. | 2D-7687 | [8] | BOLT (1-1/2-12X8-IN) | |
| 8H-3390 | [8] | NUT-FULL (1-1/2-12-THD) | ||
| 5T-4896 | [8] | SPACER (40.5X67X12-MM THK) | ||
| 3S-6162 | [8] | WASHER-HARD (40.5X67X6-MM THK) | ||
| 10. | 5T-6303 | [2] | PLATE | |
| 11. | 1D-4643 | [30] | BOLT (1-8X5.5-IN) | |
| 12. | 5T-6616 B | [4] | SHIM PACK (INCLUDES 20-SHIMS)(EACH INCL 20 SHIMS) | |
| 13. | 5T-6255 | [2] | KEY | |
| 14. | 9T-2238 | [2] | VALVE AS (SUSPENSION CHARGING) | |
| (EACH INCLUDES) | ||||
| 5J-5148 | [1] | CORE | ||
| 6J-0368 | [1] | CAP | ||
| 15. | 6V-5142 | [2] | SEAL-O-RING | |
| 16. | 030-0167 | [2] | RING-BACKUP | |
| 17. | 8M-4435 | [2] | SEAL-O-RING | |
| 18. | 7X-0291 | [4] | BOLT (3/8-16X3.75-IN) | |
| 19. | 6E-3748 | [2] | COVER AS | |
| 20. | 9T-3637 | [2] | VALVE GP-CHECK (PAYLOAD MONITOR) | |
| (EACH INCLUDES) | ||||
| 5J-5148 | [1] | CORE | ||
| 21. | 033-6039 | [2] | SEAL-O-RING | |
| 22. | 101-9980 Y | [2] | SENSOR GP-PRESSURE (PAYLOAD MONITOR) | |
| 23. | 8W-4838 | [2] | GUARD AS | |
| 24. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 25. | 5M-6708 | [2] | WASHER (0.609X1.25X0.219-IN THK) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21920926
5T-4465: SUSPENSION & MTG GP-FRONT
5T-4465 SUSPENSION & MTG GP-FRONT
S/N 7EK314-UP
PART OF 2A-6530 CHASSIS AR
Type 1
S/N 7EK314-UP
PART OF 2A-6530 CHASSIS AR
Type 1
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4639 | [8] | BOLT (1-8X4-IN) | |
| 2. | 5P-8250 | [38] | WASHER (28X49X5-MM THK) | |
| 3. | 5M-6214 | [2] | PLUG (1/8-27 PTF) | |
| 4. | 6V-3249 | [2] | BEARING | |
| 5. | 5T-5202 | [2] | CAP | |
| 6. | 6V-0836 | [2] | RING-RETAINING | |
| 7. | 4T-5182 Y | [2] | SUSPENSION GP-FRONT | |
| 8. | 5P-5769 | [24] | BOLT (1-1/4-12X7-IN) | |
| 5T-1352 | [24] | SPACER (34X55X12-MM THK) | ||
| 7H-7539 | [24] | NUT-FULL (1-1/4-12-THD) | ||
| 4K-0684 | [24] | WASHER-HARD (34X55X6-MM THK) | ||
| 9. | 2D-7687 | [8] | BOLT (1-1/2-12X8-IN) | |
| 8H-3390 | [8] | NUT-FULL (1-1/2-12-THD) | ||
| 5T-4896 | [8] | SPACER (40.5X67X12-MM THK) | ||
| 3S-6162 | [8] | WASHER-HARD (40.5X67X6-MM THK) | ||
| 10. | 5T-6303 | [2] | PLATE | |
| 11. | 1D-4643 | [30] | BOLT (1-8X5.5-IN) | |
| 12. | 5T-6616 B | [4] | SHIM PACK (INCLUDES 20-SHIMS)(EACH INCLUDES 20 SHIMS) | |
| 13. | 5T-6255 | [2] | KEY | |
| 14. | 9T-2238 | [2] | VALVE AS (SUSPENSION CHARGING) | |
| (EACH INCLUDES) | ||||
| 5J-5148 | [1] | CORE | ||
| 6J-0368 | [1] | CAP | ||
| 15. | 6V-5142 | [2] | SEAL-O-RING | |
| 16. | 030-0167 | [2] | RING-BACKUP | |
| 17. | 8M-4435 | [2] | SEAL-O-RING | |
| 18. | 7X-0291 | [4] | BOLT (3/8-16X3.75-IN) | |
| 19. | 6E-3748 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 6V-3231 | [3] | BOSS-WELD | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 20. | 9T-3637 | [2] | VALVE GP-CHECK (PAYLOAD MONITOR) | |
| (EACH INCLUDES) | ||||
| 5J-5148 | [1] | CORE | ||
| 21. | 033-6039 | [2] | SEAL-O-RING | |
| 22. | 124-0328 CY | [2] | SENSOR GP-PRESSURE (PAYLOAD MONITOR) | |
| 23. | 8W-4838 | [2] | GUARD AS | |
| 24. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 25. | 5M-6708 | [2] | WASHER (0.609X1.25X0.219-IN THK) | |
| 26. | 117-4935 C | [16] | PLATE | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21920927
5T-4465: SUSPENSION & MTG GP-FRONT
5T-4465 SUSPENSION & MTG GP-FRONT
S/N 7EK314-UP
PART OF 2A-6530 CHASSIS AR
Type 2
S/N 7EK314-UP
PART OF 2A-6530 CHASSIS AR
Type 2
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4639 | [8] | BOLT (1-8X4-IN) | |
| 2. | 5P-8250 | [38] | WASHER (28X49X5-MM THK) | |
| 3. | 5M-6214 | [2] | PLUG (1/8-27 PTF) | |
| 4. | 6V-3249 | [2] | BEARING | |
| 5. | 5T-5202 | [2] | CAP | |
| 6. | 6V-0836 | [2] | RING-RETAINING | |
| 7. | 4T-5182 Y | [2] | SUSPENSION GP-FRONT | |
| 8. | 5P-5769 | [24] | BOLT (1-1/4-12X7-IN) | |
| 5T-1352 | [24] | SPACER (34X55X12-MM THK) | ||
| 7H-7539 | [24] | NUT-FULL (1-1/4-12-THD) | ||
| 4K-0684 | [24] | WASHER-HARD (34X55X6-MM THK) | ||
| 9. | 2D-7687 | [8] | BOLT (1-1/2-12X8-IN) | |
| 8H-3390 | [8] | NUT-FULL (1-1/2-12-THD) | ||
| 5T-4896 | [8] | SPACER (40.5X67X12-MM THK) | ||
| 3S-6162 | [8] | WASHER-HARD (40.5X67X6-MM THK) | ||
| 10. | 5T-6303 | [2] | PLATE | |
| 11. | 1D-4643 | [30] | BOLT (1-8X5.5-IN) | |
| 12. | 5T-6616 B | [4] | SHIM PACK (INCLUDES 20-SHIMS)(EACH INCLUDES 20 SHIMS) | |
| 13. | 5T-6255 | [2] | KEY | |
| 14. | 9T-2238 | [4] | VALVE AS (SUSPENSION CHARGING) | |
| (EACH INCLUDES) | ||||
| 175-3185 | [1] | CORE-VALVE | ||
| 6J-0368 | [1] | CAP | ||
| 15. | 114-3361 C | [2] | SEAL-O-RING | |
| 16. | 030-0167 | [2] | RING-BACKUP | |
| 17. | 8M-4435 | [4] | SEAL-O-RING | |
| 18. | 7X-0291 | [4] | BOLT (3/8-16X3.75-IN) | |
| 19. | 6E-3748 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 6V-3231 | [3] | BOSS-WELD | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 20. | 129-1029 C | [2] | VALVE GP-CHECK (PAYLOAD MONITOR) | |
| (EACH INCLUDES) | ||||
| 175-3185 | [1] | CORE-VALVE | ||
| 21. | 033-6039 | [2] | SEAL-O-RING | |
| 22. | 124-0328 Y | [2] | SENSOR GP-PRESSURE (PAYLOAD MONITOR) | |
| 23. | 8W-4838 | [2] | GUARD AS | |
| 24. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 25. | 5M-6708 | [4] | WASHER (0.609X1.25X0.219-IN THK) | |
| 26. | 117-4935 | [16] | PLATE | |
| 27. | 2D-2285 | [4] | BOLT (3/8-16X1.75-IN) | |
| 28. | 4T-4837 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-4755 | [1] | PLATE-WARNING (SUSPENSION CYLINDER) | ||
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21920928
347-7423: SUSPENSION GP-FRONT
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-6853 | [2] | FITTING-PRESSURE RELIEF | |
| 2. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 4T-4826 | [1] | PISTON | |
| 4. | 4T-4838 | [1] | HEAD | |
| 5. | 4T-4839 | [1] | END | |
| 6. | 4T-5181 | [3] | RETAINER | |
| 7. | 9X-7352 N | [1] | SEAL-LIP TYPE | |
| 8. | 171-3707 | [1] | PLATE | |
| 9. | 271-7486 | [1] | ROD | |
| 10. | 279-2269 | [2] | FILM-WARNING (CRUSH HAZARD, READ MANUAL) | |
| 11. | 279-2271 | [2] | FILM-WARNING (HIGH PRESSURE, READ MANUAL) | |
| 12. | 297-3134 | [1] | HOUSING AS | |
| 13. | 297-3135 | [1] | GLAND | |
| 14. | 1D-4639 | [40] | BOLT (1-8X4-IN) | |
| 15. | 1F-8359 | [1] | BALL | |
| 16. | 312-4249 N | [1] | SEAL-U-CUP | |
| 17. | 4J-1253 N | [3] | SEAL-O-RING | |
| 18. | 4T-4825 JN | [1] | RING-WEAR | |
| 19. | 4T-4827 JN | [1] | RING-WEAR | |
| 20. | 4T-5929 N | [5] | RING-BACKUP | |
| 21. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 22. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 5P-8250 | [40] | WASHER (28X49X5-MM THK) | |
| 24. | 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | |
| 25. | 8H-0273 N | [1] | SEAL-O-RING | |
| 26. | 8T-1130 JN | [1] | RING-WEAR | |
| 27. | 8T-6376 | [1] | PLATE-INSTRUCTION (HYDRAULIC ACCUMULATOR) | |
| 28. | 8T-7574 N | [1] | SEAL-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 512-6572 J | [1] | KIT-WEAR RING | ||
| (INCLUDES WEAR RINGS) | ||||
| 569-4636 N | [1] | KIT-HYDRAULIC CYLINDER SEAL | ||
| (INCLUDES SEALS & RINGS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP21920929
4T-5182: SUSPENSION GP-FRONT
4T-5182 SUSPENSION GP-FRONT
S/N 7EK1-UP
PART OF 5T-4465 SUSPENSION & MTG GP-FRONT, 6E-1921 SUSPENSION GP-FRONT
FIELD REPLACEMENT ORDER @@@@@347-7423@@@@@
S/N 7EK1-UP
PART OF 5T-4465 SUSPENSION & MTG GP-FRONT, 6E-1921 SUSPENSION GP-FRONT
FIELD REPLACEMENT ORDER @@@@@347-7423@@@@@
For full view, you need register
Parts for your 789B TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-6853 | [2] | FITTING-PRESSURE RELIEF | |
| 2. | 4T-4826 | [1] | PISTON | |
| 3. | 4T-4834 | [1] | TUBE | |
| 4. | 4T-4838 | [1] | HEAD | |
| 5. | 4T-4839 | [1] | END | |
| 6. | 4T-5181 | [3] | RETAINER | |
| 7. | 279-2271 | [2] | FILM-WARNING (HIGH PRESSURE, READ MANUAL) | |
| 8. | 9T-9346 | [1] | ROD | |
| 9. | 106-0905 | [1] | HOUSING AS | |
| 10. | 171-3707 | [1] | PLATE | |
| 11. | 1D-4639 | [40] | BOLT (1-8X4-IN) | |
| 12. | 1F-8359 | [1] | BALL | |
| 13. | 312-4249 | [1] | SEAL-U-CUP | |
| 14. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF)(FRONT SUSPENSION) | |
| 15. | 4J-1253 | [2] | SEAL-O-RING | |
| 16. | 4T-4825 | [1] | RING-WEAR | |
| 17. | 4T-4827 | [1] | RING-WEAR | |
| 18. | 4T-5929 | [2] | RING-BACKUP | |
| 19. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 20. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 5P-8250 | [40] | WASHER (28X49X5-MM THK) | |
| 22. | 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | |
| 23. | 8H-0273 | [1] | SEAL-O-RING | |
| 24. | 8T-1130 | [1] | RING-WEAR | |
| 25. | 279-2269 | [2] | FILM-WARNING (CRUSH HAZARD, READ MANUAL) | |
| 26. | 8T-7574 | [1] | SEAL-RING | |
| 27. | 9T-0276 | [1] | GLAND (SUSPENSION CYLINDER) | |
| 28. | 9X-7352 | [1] | SEAL-LIP TYPE | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
