AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N1342 COVER GP-CYLINDER BLOCK 330 L EXCAVATOR


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
HOUSING GP-FLYWHEEL
CAMSHAFT GP
FLYWHEEL GP
PISTON & ROD GP
CYLINDER HEAD GP

EXCAVATOR 330 L EXCAVATOR 2EL
 330, 330 L AND 330 LN EXCAVATORS 2EL00001-UP (MACHINE) POWERED BY 3306 ENGINE SEBP2198 330 L 2EL   (2016)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7N-6550 CYLINDER BLOCK AS
COVER GP-CYLINDER BLOCK
7N-1342 COVER GP-CYLINDER BLOCK
 

#SEBP21980010
 

7N-1342: COVER GP-CYLINDER BLOCK

7N1342 COVER GP-CYLINDER BLOCK
c312973 SEBP2198
7N1342 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 B [2] BOLT  
2. 5M-2894 B [2] WASHER  
3. 8L-8662 B [1] COVER  
4. 5S-8055 B [1] GASKET  
5. 4B-3938 [1] PLUG-CUP  
6. 2A-3798 [2] DOWEL  
7. 8M-3267 B [1] SCREW-HEX SOCKET  
8. 5M-6214 BC [1] PLUG-PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21980011
 

2P-6224: SEAL GP-CRANKSHAFT

2P6224 SEAL GP-CRANKSHAFT
c490391 SEBP2198
2P6224 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0452 [1] SEAL GP-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)(REAR)  
2. 362-8853 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) (FRONT)  
   
    -OR-
   
  9Y-9895 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) (FRONT)  
 

#SEBP21980012
 

2W-7458: CRANKSHAFT AS

2W7458 CRANKSHAFT AS*R
PART OF 6N8079 CRANKSHAFT
c488582 SEBP2198
2W7458 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [6] PLUG  
2. 1W-4405 [1] GEAR-CRANKSHAFT (40 TEETH)  
3. 5H-2671 [1] KEY-WOODRUFF  
 

#SEBP21980013
 

8N-2395: HOUSING GP-FLYWHEEL

8N2395 HOUSING GP-FLYWHEEL
ENGINE S/N 13Z27468-41027
c514718 SEBP2198
8N2395 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 B [1] PLUG-CUP  
2. 5F-0304 [1] PLUG-DRAIN  
  2A-1162 [1] GASKET  
3. 5M-6213 [1] PLUG  
4. 1B-5170 [2] PLUG-PIPE  
5. 1B-5174 [1] PLUG-PIPE  
6. 1A-1460 [13] BOLT  
7. 9H-5921 [1] GASKET-FLYWHEEL HOUSING  
8. 7W-9324 [1] HOUSING-FLYWHEEL  
9. 8S-0527 B [1] PLUG-CUP  
  B   USE AS REQUIRED
 

#SEBP21980014
 

8N-2395: HOUSING GP-FLYWHEEL

8N2395 HOUSING GP-FLYWHEEL
ENGINE S/N 13Z41028-UP
c720044 SEBP2198
8N2395 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 B [1] PLUG-CUP (32.08MM AVG OD)  
2. 5F-0304 [2] PLUG-DRAIN  
  2A-1162 [2] GASKET  
3. 8T-6765 [1] PLUG-PIPE (1/4-18 NPTF THD)  
4. 7X-7730 [1] PLUG-PIPE  
5. 7X-7731 [1] PLUG-PIPE (3/4-14 NPTF THD)  
6. 1A-1460 [13] BOLT (1/2-13X2IN)  
7. 9H-5921 [1] GASKET-FLYWHEEL HOUSING  
8. 143-0814 [1] HOUSING-FLYWHEEL  
9. 8S-0527 B [1] PLUG-CUP  
10. 8T-6760 [1] PLUG-PIPE  
  B   USE AS REQUIRED
 

#SEBP21980015
 

1N-4406: CAMSHAFT GP

1N4406 CAMSHAFT GP-SINGLE
c556765 SEBP2198
1N4406 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2942 R [1] CAMSHAFT AS  
2. 7S-2204 [1] WASHER-THRUST  
3. 8S-1491 [1] LOCK  
4. 0S-0509 [2] BOLT  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP21980016
 

7C-4441: FLYWHEEL GP

7C4441 FLYWHEEL GP
c544324 SEBP2198
7C4441 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1600 [9] BOLT  
2. 7C-4442 [1] FLYWHEEL AS  
  7N-9146 [1] GEAR (156 TEETH)  
 

#SEBP21980017
 

6I-3834: PISTON & ROD GP

6I3834 PISTON & ROD GP-6 REQUIRED
c541798 SEBP2198
6I3834 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-3650 [1] BODY AS-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 7N-9805 [1] PIN-PISTON  
4. 8N-1721 R [1] ROD AS-CONNECTING  
  1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
  8N-1849 [1] BEARING-CONNECTING ROD  
5. 4W-5739 [1] BEARING-CONNECTING ROD  
    (STD)
  8N-8221 A [1] BEARING-CONNECTING ROD  
    (.25MM)UNDERSIZE
  8N-8222 A [1] BEARING-CONNECTING ROD  
    (.51MM)UNDERSIZE
  8N-8223 A [1] BEARING-CONNECTING ROD  
    (.76MM)UNDERSIZE
6. 7E-6047 [1] RING-PISTON (OIL)  
7. 5S-6750 [1] RING-INTERMEDIATE  
8. 2W-1707 [1] RING-PISTON (TOP)  
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP21980018
 

8N-0246: CYLINDER HEAD GP

8N0246 CYLINDER HEAD GP*R
SERVICE REPLACEMENT ORDER 8N6796-PAGE 14.01
c721538 SEBP2198
8N0246 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 [12] ROTOCOIL AS  
    (EACH INCLUDES)
  103-2454 [1] SPRING-VALVE  
  6N-7174 [1] SHIELD-OIL  
3. 2A-4429 [24] LOCK-RETAINER  
4. 7N-8018 [6] SEAL-WATER  
5. 9Y-1798 [18] SEAL-WATER  
6. 100-7861 [6] VALVE (EXHAUST)  
7. 100-7860 [6] VALVE-INLET  
8. 111-8015 [1] GASKET AS-CYLINDER HEAD  
9. 3B-0623 [6] PLUG-CUP (25.73MM AVG OD)  
10. 3S-8313 [7] PLUG-CUP  
11. 3S-5496 [1] SEAL-O-RING  
12. 8T-6763 [1] PLUG  
13. 107-0268 [6] INSERT-VALVE SEAT  
14. 107-0265 [6] INSERT-VALVE SEAT  
15. 148-7502 [12] GUIDE-VALVE  
16. 3P-1896 [13] PLUG-CUP  
17. 8T-6762 B [3] PLUG-PIPE  
  B   USE AS REQUIRED
 

#SEBP21980019
 

8N-6796: CYLINDER HEAD GP

8N6796 CYLINDER HEAD GP
SERVICE REPLACEMENT FOR 8N246-PAGE 14
c721015 SEBP2198
8N6796 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 330 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-7502 [12] GUIDE-VALVE  
2. 5M-2894 [4] WASHER (2.5MM THK)  
3. 8T-6762 [3] PLUG-PIPE  
4. 5S-6735 [1] GASKET  
5. 1P-6367 [1] COVER  
6. 0S-1594 [4] BOLT (3/8-16X1IN)  
7. 8T-6763 [1] PLUG  
8. 8N-4485 [1] VALVE AS  
9. 107-0265 [6] INSERT-VALVE SEAT  
10. 107-0268 [6] INSERT-VALVE SEAT (INT)  
11. 3B-0623 [6] PLUG-CUP (25.73MM AVG OD)  
12. 3S-8313 [7] PLUG-CUP  
13. 3P-1896 [13] PLUG-CUP  
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Cylinder Liner - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Spacer Plate - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Liner - Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 330 L :

CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CYLINDER BLOCK AS
7N-6550 CYLINDER BLOCK AS
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
9Y-4134 ENGINE AR
9Y-4134 ENGINE AR
9Y-4133 ENGINE AR
6C-9318 ENGINE AR
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
CRANKSHAFT AS
2W-7458 CRANKSHAFT AS
HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
CAMSHAFT GP
1N-4406 CAMSHAFT GP
FLYWHEEL GP
7C-4441 FLYWHEEL GP
PISTON & ROD GP
6I-3834 PISTON & ROD GP
CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP

Truck sale:

Caterpillar 330L, Crawler Excavators, Construction
21,000 
Caterpillar 330L, Crawler Excavators, Construction
- Crawler Excavators
FABICK CAT
Caterpillar 330L, Rupsgraafmachines, Bouw
45.000 
Caterpillar 330L, Rupsgraafmachines, Bouw

PETERSON CAT
Caterpillar 330LONG, Raupenbagger, Bau-Und Bergbauausrüstung
325.000 
Caterpillar 330LONG, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler Excavators
RING POWER CORP.
 
 
Caterpillar 330 L, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
Caterpillar 330LONG, Raupenbagger, Bau-Und Bergbauausrüstung
395.000 
Caterpillar 330LONG, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler Excavators
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.