ELECTRICAL AND STARTING SYSTEM
WIRING GPBATTERY GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP21980150
5I-8344: WIRING GP
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-8345 | [1] | HARNESS AS | |
| 2. | 8T-4121 | [5] | WASHER (21MM OD) | |
| 3. | 8T-4137 | [1] | BOLT (M10X1.50X20MM) | |
| 4. | 4D-8123 | [5] | CLIP | |
| 5. | 8T-4133 | [4] | NUT (M10X1.50 THD) | |
| 6. | 7X-6386 | [1] | SWITCH AS-ROCKER (CREEPER SPEED CONTROL) | |
| 7N-7779 | [1] | SOCKET | ||
| 7N-7780 | [1] | PIN-CONNECTOR (BLADE) | ||
| 7N-9737 | [1] | HOUSING-PLUG | ||
| 7. | 5I-8372 | [1] | PLATE AS | |
| 8T-3490 | [1] | NUT-WELD (M10X1.5-6H THD) |
#SEBP21980151
121-4763: WIRING GP-CONSOLE
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS#SEBP21980152
7Y-8184: WIRING GP-CONSOLE
7Y8184 WIRING GP-CONSOLE
PART OF 6C8283 & 1139152 OPERATORS AR
PART OF 6C8283 & 1139152 OPERATORS AR
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS#SEBP21980153
117-9433: WIRING GP-PLATFORM
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-6024 | [1] | HARNESS AS | |
| 2. | 6K-0806 | [18] | STRAP-CABLE | |
| 3. | 3T-3132 | [1] | SWITCH AS-PLUNGER (COMMON PIPING) | |
| 2H-3922 | [1] | LOCKWASHER (3/4 INTERNAL TOOTH) | ||
| 6V-8363 | [2] | SCREW (10-32X.312IN) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-2B THD MM) | ||
| 8F-1434 | [2] | LOCKWASHER (5MM ID) | ||
| 9X-0199 | [1] | BOOT-SWITCH |
#SEBP21980154
4I-5379: WIRING GP-CONSOLE
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-8215 | [1] | HARNESS AS | |
| 2. | 7Y-3921 | [1] | HARNESS AS | |
| 3. | 3T-4405 | [1] | SWITCH AS (GOVERNOR) | |
| 4. | 7N-8008 | [1] | SWITCH AS (ACCELERATOR) | |
| 5. | 7Y-8233 | [1] | BRACKET | |
| 6. | 8T-4171 M | [3] | BOLT | |
| 9X-8256 | [3] | WASHER | ||
| 7. | 7Y-8247 | [1] | PLUG-BEZEL | |
| 8. | 9G-7641 Y | [1] | SWITCH GP-START | |
| 9. | 7Y-5465 | [1] | SWITCH AS-ROTARY | |
| 7N-7779 | [3] | SOCKET | ||
| 7N-7780 | [2] | PIN-CONNECTOR | ||
| 9G-3672 | [1] | HOUSING-PLUG | ||
| 10. | 4K-8864 | [1] | CLIP | |
| 11. | 8T-4191 M | [1] | BOLT | |
| 12. | 8T-4121 | [1] | WASHER | |
| 13. | 7Y-8234 | [1] | BRACKET | |
| 14. | 3S-2093 | [4] | STRAP-CABLE | |
| 15. | 7Y-8246 | [3] | PLUG-BEZEL | |
| 16. | 7Y-9390 | [1] | KNOB | |
| 17. | 7Y-8172 | [1] | GROMMET | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21980155
121-4764: WIRING GP-CONSOLE
1214764 WIRING GP-CONSOLE
LH
S/N 2EL423-UP, 8CK279-UP
PART OF 1214763 WIRNG-CONSOLE
LH
S/N 2EL423-UP, 8CK279-UP
PART OF 1214763 WIRNG-CONSOLE
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-4694 | [1] | PLUG-BUTTON | |
| 2. | 3T-4405 | [1] | SWITCH AS | |
| 3. | 7Y-8246 | [4] | PLUG-BEZEL | |
| 4. | 9X-8256 | [5] | WASHER (2MM THK) | |
| 5. | 8T-4171 M | [3] | BOLT (M6X1.0X12MM) | |
| 6. | 7Y-8233 | [1] | BRACKET | |
| 7. | 7Y-8172 | [1] | GROMMET | |
| 8. | 7Y-3868 | [1] | HARNESS AS | |
| 9. | 102-7902 | [1] | HARNESS AS | |
| 10. | 8T-4121 | [1] | WASHER (2.5MM THK) | |
| 11. | 8T-4191 M | [1] | BOLT (M10X1.50X16MM) | |
| 12. | 5P-9297 | [1] | CLIP (9.52MM ID) | |
| 13. | 102-8016 | [1] | RESISTOR AS (47 OHMS)(40 WATT) | |
| 14. | 5C-9553 M | [2] | BOLT (M6X1.0X16MM) | |
| 15. | 7Y-8234 | [1] | BRACKET | |
| 16. | 3S-2093 | [5] | STRAP-CABLE | |
| 17. | 102-8018 | [1] | COVER | |
| 18. | 114-4876 | [1] | HARNESS AS | |
| M | METRIC PART | |||
#SEBP21980156
121-4761: WIRING GP-CONSOLE
1214761 WIRING GP-CONSOLE
RH
S/N 2EL423-UP, 8CK279-UP
PART OF 1214763 WIRING CONSOLE
RH
S/N 2EL423-UP, 8CK279-UP
PART OF 1214763 WIRING CONSOLE
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-4405 | [1] | SWITCH AS (GOVERNOR BACKUP) | |
| 3L-8187 | [6] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32 THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | LOCKRING | ||
| 6V-8374 | [6] | SCREW-MACHINE (6-32X.25IN) | ||
| 2. | 7N-8008 | [1] | SWITCH AS-TOGGLE (SPEED SELECT) | |
| 3L-8187 | [6] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32 THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | LOCKRING | ||
| 6V-8374 | [6] | SCREW-MACHINE (6-32X.25IN) | ||
| 3. | 9X-8256 | [3] | WASHER (2MM THK) | |
| 4. | 8T-4171 M | [3] | BOLT (M6X1.0X12MM) | |
| 5. | 7Y-8234 | [1] | BRACKET | |
| 6. | 7Y-8233 | [1] | BRACKET | |
| 7. | 7Y-8246 | [3] | PLUG-BEZEL | |
| 8. | 7Y-8172 | [1] | GROMMET | |
| 9. | 7Y-8247 | [1] | PLUG-BEZEL | |
| 10. | 7Y-9390 | [1] | KNOB | |
| 11. | 3S-2093 | [7] | STRAP-CABLE | |
| 12. | 9G-7641 Y | [1] | SWITCH GP-START | |
| 13. | 5I-8215 | [1] | HARNESS AS | |
| 14. | 7Y-3921 | [1] | HARNESS AS | |
| 15. | 4K-8864 | [1] | CLIP | |
| 16. | 8T-4121 | [1] | WASHER (2.5MM THK) | |
| 17. | 8T-4191 M | [1] | BOLT (M10X1.50X16MM) | |
| 18. | 7Y-5465 | [1] | SWITCH AS-ROTARY (THROTTLE) | |
| 7N-7779 | [3] | SOCKET | ||
| 7N-7780 | [2] | PIN-CONNECTOR | ||
| 7Y-5458 M | [1] | NUT (M12X1.0) | ||
| 7Y-5464 | [1] | WASHER | ||
| 9G-3672 | [1] | HOUSING-PLUG | ||
| 19. | 117-7253 | [1] | HARNESS AS | |
| 20. | 7X-6388 | [1] | SWITCH AS-ROCKER (HAMMER ) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP21980157
105-9996: BATTERY & WIRING GP
1059996 BATTERY & WIRING GP-PART 1 OF 6
S/N 6ZK64-UP,2EL332-656,8CK206-1110
S/N 6ZK64-UP,2EL332-656,8CK206-1110
#SEBP21980158
105-9996: BATTERY & WIRING GP
1059996 BATTERY & WIRING GP-PART 2 OF 6
S/N 6ZK64-UP,2EL332-656,8CK206-1110
S/N 6ZK64-UP,2EL332-656,8CK206-1110
Parts for your 330 L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-4818 | [3] | LOCKWASHER-TOOTH | |
| 2. | 8T-4133 M | [12] | NUT | |
| 3. | 8T-4121 | [20] | WASHER | |
| 4. | 7Y-8132 | [1] | CABLE AS (FROM GRD ON FRAME TO | |
| GRD ON STARTER MOTOR) | ||||
| 1S-7251 | [2] | TERMINAL | ||
| 5P-0747 E | CABLE (00 GA) (60CM) | |||
| 5. | 8T-4191 M | [7] | BOLT | |
| 6. | 7Y-8167 | [1] | GROMMET | |
| 7. | 087-4587 | [2] | GROMMET | |
| 8. | 5P-9297 | [9] | CLIP (9.52MM DIA) | |
| 9. | 8T-4192 M | [2] | BOLT | |
| 10. | 6D-4246 | [1] | CLIP | |
| 11. | 4K-8864 | [3] | CLIP | |
| 12. | 7Y-8165 | [2] | GROMMET | |
| 13. | 7Y-8168 | [2] | GROMMET | |
| 14. | 8T-4223 | [2] | WASHER-HARD | |
| 15. | 4I-5437 | [1] | PLATE | |
| 16. | 4S-4455 | [4] | CLIP (31.75 MM ID) | |
| 17. | 1S-0994 | [1] | CLIP (20.64MM)ID | |
| 18. | 9M-4995 | [1] | CLIP (12.7 MM ID) | |
| 19. | 6V-1889 | [1] | CLIP (28.58MM ID) | |
| 20. | 9G-9150 | [1] | CLIP | |
| 21. | 4S-1962 | [1] | CLIP (25.4MM DIA) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP21980159
105-9996: BATTERY & WIRING GP
1059996 BATTERY & WIRING GP-PART 3 OF 6
S/N 6ZK64-UP,2EL332-656,8CK206-1110
S/N 6ZK64-UP,2EL332-656,8CK206-1110
Parts for your 330 L EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Caterpillar Parts SIS Catalog 330 L :
Truck sale:
325.000
Caterpillar 330 L, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
395.000



