AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W9746 CYLINDER BLOCK GP*R S/N 4TF23955-UP 1004948-PAGE 4.02 320 L EXCAVATOR


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

EXCAVATOR 320 L EXCAVATOR 3XK
 320, 320 L, 320 N AND 320 S EXCAVATORS 3XK00822-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2199 320 L 3XK   (2019)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-4491 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
6I-3766 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4W-2108 COVER GP-CYLINDER BLOCK
 

#SEBP21990010
 

2W-9746: CYLINDER BLOCK GP

2W9746 CYLINDER BLOCK GP*R
S/N 4TF23955-UP
1004948-PAGE 4.02
c607753 SEBP2199
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL (20MM(.78IN)LG)  
3. 4P-2457 [6] TUBE AS-JET  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21990011
 

100-4948: CYLINDER BLOCK GP

1004948 CYLINDER BLOCK GP
S/N 4TF23955-UP
PART OF 2W9746 CYLINDER BLOCK
c565983 SEBP2199
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT  
4. 5P-8247 [14] WASHER-HARD  
5. 9S-8005 [1] PLUG-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BEARING-SLEEVE  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG-O-RING  
10. 8T-0293 M [2] BOLT  
11. 6F-7062 [2] WASHER  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG-O-RING  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BEARING-SLEEVE  
  M   METRIC PART
 

#SEBP21990012
 

7C-5826: CYLINDER BLOCK GP

7C5826 CYLINDER BLOCK GP
S/N 4TF4123-23954
PART OF 2W9746 CYLINDER BLOCK
FIELD REPLACEMENT FOR 1014491-PAGE 5.01
c537336 SEBP2199
7C5826 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT  
4. 5P-8247 [14] WASHER-HARD  
5. 9S-8005 [1] PLUG-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BEARING-SLEEVE  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG-O-RING  
10. 8T-0293 M [2] BOLT  
11. 6F-7062 [2] WASHER  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG-O-RING  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BEARING-SLEEVE  
   
  7C-6208 AF [1] SLEEVE-CYLINDER  
    FOR SALVAGE OF DAMAGED
    CYL. BORES IN BLOCK.
    QUANTITY TO BE
    DETERMINED BY USER.
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP21990013
 

101-4491: CYLINDER BLOCK GP

1014491 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER 7C5826-PAGE 5
c568700 SEBP2199
1014491 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 [14] BOLT  
4. 5P-8247 [14] WASHER-HARD  
5. 9S-8005 [1] PLUG-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BEARING-SLEEVE  
8. 3D-2824 [1] SEAL-O-RING  
9. 9S-8008 [1] PLUG-O-RING  
10. 8T-0293 M [2] BOLT  
11. 6F-7062 [2] WASHER  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG-O-RING  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BEARING-SLEEVE  
16. 9S-8008 B [1] PLUG-O-RING  
17. 3D-2824 B [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP21990014
 

6I-3766: COVER GP-CYLINDER BLOCK

6I3766 COVER GP-CYLINDER BLOCK
c573283 SEBP2199
6I3766 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3871 [3] COVER-SIDE  
2. 7W-9699 [3] GASKET  
3. 6V-2317 M [10] BOLT  
4. 9M-1974 [20] WASHER-HARD  
5. 6V-2317 BM [2] BOLT  
6. 6V-5217 M [10] BOLT  
7. 2W-6544 [1] COVER  
8. 1U-8846 B LIQUID GASKET  
9. 7W-3872 [6] SLEEVE (LOCATION X)  
10. 9S-4191 [3] PLUG-O-RING  
11. 3J-1907 [3] SEAL-O-RING  
12. 9Y-0747 [1] MANIFOLD-OIL  
13. 4F-9653 [1] SEAL-O-RING  
14. 6V-5842 M [2] BOLT  
15. 6V-5839 [2] WASHER  
16. 9M-1974 B [4] WASHER-HARD  
17. 6V-5217 BM [2] BOLT  
18. 110-7618 [4] BOLT AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP21990015
 

4W-2108: COVER GP-CYLINDER BLOCK

4W2108 COVER GP-CYLINDER BLOCK
c580979 SEBP2199
4W2108 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [10] BOLT  
2. 9M-1974 [20] WASHER-HARD  
3. 7W-3872 [6] SLEEVE  
4. 7W-3871 [3] COVER-SIDE  
5. 7W-9699 [3] GASKET  
6. 4F-9653 [1] SEAL-O-RING (LARGE)  
7. 6V-5217 M [10] BOLT  
8. 2W-6544 [1] COVER  
9. 9S-4191 [3] PLUG-O-RING  
10. 3J-1907 [3] SEAL-O-RING (SMALL)  
11. 9Y-0747 [1] MANIFOLD-OIL  
12. 6V-5842 M [2] BOLT  
13. 6V-5839 [2] WASHER  
14. 6V-2317 BM [2] BOLT  
  9M-1974 [2] WASHER-HARD  
15. 6V-5217 BM [1] BOLT  
  9M-1974 [1] WASHER-HARD  
16. 110-7618 [4] BOLT AS  
17. 1U-8846 LIQUID GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP21990016
 

4W-1016: SEAL GP-CRANKSHAFT

4W1016 SEAL GP-CRANKSHAFT
TYPE 2
FIELD REPLACEMENT FOR 7C3571 ORDER 1154109
c581969 SEBP2199
4W1016 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-3571 [1] SEAL GP-CRANKSHAFT  
2. 7C-4163 [1] SEAL GP-CRANKSHAFT  
 

#SEBP21990017
 

4W-1016: SEAL GP-CRANKSHAFT

4W1016 SEAL GP-CRANKSHAFT
TYPE 1
c406537 SEBP2199
4W1016 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-3570 [1] SEAL GP-CRANKSHAFT  
2. 7C-4163 [1] SEAL GP-CRANKSHAFT  
 

#SEBP21990018
 

115-4203: SEAL GP-CRANKSHAFT

1154203 SEAL GP-CRANKSHAFT
TYPE 2
c618486 SEBP2199
1154203 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-4109 [1] SEAL GP-CRANKSHAFT  
2. 119-2921 C [1] SEAL GP-CRANKSHAFT  
3. 4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21990019
 

115-4203: SEAL GP-CRANKSHAFT

1154203 SEAL GP-CRANKSHAFT
TYPE 1
c608311 SEBP2199
1154203 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-4109 [1] SEAL GP-CRANKSHAFT  
2. 7C-4163 [1] SEAL GP-CRANKSHAFT  
3. 4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines
Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
Oversize Pistons Not Available{1214,1216}
1993/04/05
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
Cylinder Sleeve Available For Reconditioning Cylinder Blocks {1222}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8192-02 {1201}
2000/01/31

Caterpillar Parts SIS Catalog 320 L :

CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
118-3627 ENGINE AR
118-3627 ENGINE AR
6I-2111 ENGINE AR
6I-2111 ENGINE AR
6I-2111 ENGINE AR
6C-6632 ENGINE AR
7Y-1585 ENGINE AR
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-4491 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
6I-3766 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4W-2108 COVER GP-CYLINDER BLOCK
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT

Truck sale:

 
 
Caterpillar 320L, Crawler Excavators, Construction


 
35,000 
Caterpillar 320L, Crawler Excavators, Construction
- Crawler Excavators
ALTORFER INC.
 
225,000 
Caterpillar 320LONG, Crawler Excavators, Construction


Caterpillar 320L, Crawler Excavators, Construction
16,500 
Caterpillar 320L, Crawler Excavators, Construction
- Crawler excavators
HOLT CAT
 
 
Caterpillar 320 L, Raupenbagger, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.