AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4I2630 PUMP GP-FUEL TRANSFER 5C0746,5C6108-PAGE 60 PART OF 4I1926 PUMP AR-FUEL TRANSFER AN ATTACHMENT 320 L


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
ELECTRICAL AND STARTING SYSTEM
WIRING GP
FUEL SYSTEM
PUMP GP-REFUELING
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
FILTER GP-FUEL
FITTING GP-FUEL

EXCAVATOR 320 L EXCAVATOR 3XK
 320, 320 L, 320 N AND 320 S EXCAVATORS 3XK00822-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2199 320 L 3XK   (2019)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
114-5269 PUMP AR-FUEL TRANSFER
4I-1926 PUMP AR-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4I-2630 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
114-5271 PUMP GP-FUEL TRANSFER
 

#SEBP21990130
 

4I-2630: PUMP GP-FUEL TRANSFER

4I2630 PUMP GP-FUEL TRANSFER
5C0746,5C6108-PAGE 60
PART OF 4I1926 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
c566333 SEBP2199
4I2630 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [2] BOLT  
2. 8T-4121 [15] WASHER  
3. 4I-2634 [1] SUPPORT AS  
4. 5P-7854 [1] CLIP (SLOT)  
5. 4I-2632 [1] COVER AS  
  8T-3490 M [1] NUT-WELD  
6. 8T-4191 M [10] BOLT  
7. 4S-1962 [1] CLIP  
8. 2S-3440 [4] CLAMP-HOSE  
9. 5P-0742 E HOSE (400 CM)  
10. 5C-0746 Y [1] STRAINER GP  
11. 8T-4195 M [3] BOLT  
12. 6C-5572 J [1] PUMP GP-MOTOR  
13. 096-3872 [2] GROMMET  
14. 093-2068 [1] GROMMET  
15. 6D-3534 [1] CONNECTOR-HOSE  
16. 003-9163 [2] ELBOW  
17. 005-7898 [1] CONNECTOR-HOSE  
18. 7K-1181 [1] STRAP-CABLE  
19. 5P-0743 E HOSE (150 CM)  
20. 4I-0062 [1] COVER  
21. 5C-6108 Y [1] SWITCH AS (SHUT-OFF)  
22. 4I-8443 [1] VALVE-CHECK  
23. 3B-6490 [1] COUPLING-PIPE  
24. 4I-8444 [1] SUPPORT AS  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE :
  6C-5571 J [1] KIT-SERVICE  
    (INCL O-RING, VANES
    & SHAFT SEAL)
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21990131
 

114-5271: PUMP GP-FUEL TRANSFER

1145271 PUMP GP-FUEL TRANSFER
5C0746,5C6108-PAGE 60
PART OF 1145269 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
c584640 SEBP2199
1145271 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [2] BOLT  
2. 8T-4121 [15] WASHER  
3. 4I-2634 [1] SUPPORT AS  
4. 5P-7854 [1] CLIP (SLOT)  
5. 115-0727 [1] CHANNEL  
6. 8T-4191 M [10] BOLT  
7. 4S-1962 [1] CLIP  
8. 2S-3440 [4] CLAMP-HOSE  
9. 5P-0742 E HOSE (400 CM)  
10. 5C-0746 Y [1] STRAINER GP  
11. 8T-4195 M [3] BOLT  
12. 6C-5572 J [1] PUMP GP-MOTOR  
13. 096-3872 [2] GROMMET  
14. 093-2068 [1] GROMMET  
15. 6D-3534 [1] CONNECTOR-HOSE  
16. 003-9163 [2] ELBOW  
17. 005-7898 [1] CONNECTOR-HOSE  
18. 7K-1181 [1] STRAP-CABLE  
19. 5P-0743 E HOSE (150 CM)  
20. 4I-0062 [1] COVER  
21. 5C-6108 Y [1] SWITCH AS (SHUT-OFF)  
22. 4I-8443 [1] VALVE-CHECK  
23. 3B-6490 [1] COUPLING-PIPE  
24. 4I-8444 [1] SUPPORT AS  
25. 113-2487 [1] COVER  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE :
  6C-5571 J [1] KIT-SERVICE  
    (INCL O-RING, VANES
    & SHAFT SEAL)
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21990132
 

114-5270: WIRING GP-REFUELING PUMP

1145270 WIRING GP-REFUELING PUMP
S/N 9WG723-UP, 4ZJ460-UP, 3XK822-UP, 6KM1-UP
AN ATTACHMENT
c584637 SEBP2199
1145270 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4191 M [5] BOLT  
2. 8T-4121 [9] WASHER  
3. 8T-4133 M [4] NUT  
4. 8M-2772 [5] CLIP  
5. 4B-2049 [1] NUT  
6. 7X-0620 [1] WASHER-HARD  
7. 7Y-5490 [2] RELAY  
8. 7S-4244 [3] CLIP  
9. 5I-8258 [1] WIRE AS  
10. 115-1302 [1] PLATE-INSTRUCTION  
11. 113-2483 [1] SWITCH AS  
  9X-4959 [1] SWITCH AS-PUSHBUTTON  
12. 113-2484 [1] SWITCH AS  
  9X-4959 [1] SWITCH AS-PUSHBUTTON  
13. 114-5265 [2] ADAPTER  
14. 6F-0253 [2] LOCKWASHER  
15. 3K-0835 [2] NUT-SPECIAL  
  M   METRIC PART
 

#SEBP21990133
 

5C-0746: STRAINER GP

5C0746 STRAINER GP
PART OF 4I2630, 1145271 PUMPS-FUEL TRANSFER
AN ATTACHMENT
c207764 SEBP2199
5C0746 STRAINER GP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6783 [1] NIPPLE-HOSE  
2. 5C-0747 [1] COUPLING  
3. 5C-0748 [1] STRAINER AS  
 

#SEBP21990134
 

5C-6108: SWITCH AS-REFUELING

5C6108 SWITCH AS
PART OF 4I2630, 1145271 PUMPS-FUEL TRANSFER
AN ATTACHMENT
c558661 SEBP2199
5C6108 SWITCH AS-REFUELING Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-9236 [1] SWITCH (LEVEL)  
2. 5C-6074 [1] FITTING  
3. 2S-4078 [1] SEAL-O-RING (37.46MM ID)  
4. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
5. 8S-1815 [1] PLUG  
6. 8S-1814 [2] INSULATOR  
7. 4B-2049 [2] NUT (10-32 THD)  
8. 8S-1812 [1] POST-TERMINAL  
9. 9B-4499 [1] SCREW-MACHINE  
10. 2L-8076 [1] TERMINAL  
 

#SEBP21990135
 

7Y-5470: CONTROL GP-GOVERNOR

7Y5470 CONTROL GP-GOVERNOR
S/N 9WG723-1160,4ZJ460-596,3XK822-1908,6KM1-212
c584009 SEBP2199
7Y5470 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-5314 [1] BRACKET AS  
2. 8T-4189 M [9] BOLT  
3. 8T-4224 [10] WASHER-HARD  
4. 7Y-3914 [1] MOTOR AS-GOVERNOR  
  7N-7779 [3] SOCKET  
  7N-7780 [2] PIN-CONNECTOR  
  7Y-5560 [1] COVER  
  7Y-5561 [1] PACKING  
  9G-3672 [1] HOUSING-PLUG  
5. 5C-9553 M [2] BOLT  
6. 9X-8256 [4] WASHER  
7. 5K-5338 [4] CLIP  
8. 4I-5310 [1] COVER AS  
  8T-3612 M [1] NUT-WELD  
9. 8T-4200 M [1] BOLT  
10. 4I-5372 [1] BOSS  
11. 4I-5381 [1] PULLEY  
12. 7X-2534 M [2] BOLT  
13. 8T-4192 M [3] BOLT  
  8T-4223 [3] WASHER-HARD  
14. 4I-5470 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD  
  M   METRIC PART
 

#SEBP21990136
 

102-7986: CONTROL GP-GOVERNOR

1027986 CONTROL GP-GOVERNOR
TYPE 1. S/N 9WG1161-1571, 4ZJ597-804, 3XK1909-3265, 6KM213-379
c582935 SEBP2199
1027986 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4192 M [3] BOLT (M12X1.75X25MM)  
2. 8T-4223 [3] WASHER-HARD  
3. 102-8005 [1] MOTOR AS-GOVERNOR  
  7N-7779 [3] SOCKET  
  7N-7780 [2] PIN-CONNECTOR  
  9G-3672 [1] HOUSING-PLUG  
4. 106-0110 [1] BRACKET AS  
5. 8T-4189 M [6] BOLT (M8X1.25X20MM)  
6. 8T-4224 [9] WASHER-HARD  
7. 5C-9553 M [2] BOLT (M6X1.0X16MM)  
8. 9X-8256 [4] WASHER  
9. 6D-4246 [4] CLIP  
10. 8T-4200 M [1] BOLT (M8X1.25X16MM)  
11. 106-0070 [1] SPRING  
12. 4I-5470 [1] BRACKET AS  
13. 102-8046 [1] LEVER AS  
14. 8T-4138 M [2] BOLT (M6X1.0X20MM)  
15. 5C-7261 M [1] NUT (M8X1.25 THD)  
  M   METRIC PART
 

#SEBP21990137
 

102-7986: CONTROL GP-GOVERNOR

1027986 CONTROL GP-GOVERNOR
TYPE 2. 9WG1572-UP, 4ZJ805-UP, 3XK3266-UP, 6KM380-UP
c659741 SEBP2199
1027986 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4192 M [3] BOLT (M12X1.75X25MM)  
2. 8T-4223 [3] WASHER-HARD  
3. 126-3019 C [1] MOTOR AS-GOVERNOR  
  7N-7779 [3] SOCKET  
  7N-7780 [2] PIN-CONNECTOR  
  9G-3672 [1] HOUSING-PLUG  
4. 106-0110 [1] BRACKET AS  
5. 8T-4189 M [6] BOLT (M8X1.25X20MM)  
6. 8T-4224 [9] WASHER-HARD  
7. 5C-9553 M [2] BOLT (M6X1.0X16MM)  
8. 9X-8256 [4] WASHER  
9. 6D-4246 [4] CLIP  
10. 8T-4200 M [1] BOLT (M8X1.25X16MM)  
11. 106-0070 [1] SPRING  
12. 4I-5470 [1] BRACKET AS  
13. 102-8046 [1] LEVER AS  
14. 8T-4138 M [2] BOLT (M6X1.0X20MM)  
15. 5C-7261 M [1] NUT (M8X1.25 THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP21990138
 

6I-2693: FILTER GP-FUEL

6I2693 FILTER GP-FUEL
c589546 SEBP2199
6I2693 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [1] WASHER-HARD  
2. 6V-9607 MB [1] BOLT  
3. 3J-1907 [1] SEAL-O-RING  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT  
6. 1R-0751 [1] FILTER AS-FUEL  
7. 9S-4191 [1] PLUG-O-RING  
8. 6I-4802 C [1] BASE AS  
9. 6I-4801 C [1] INSERT-FILTER  
10. 9M-1974 [3] WASHER-HARD  
11. 6V-9607 M [1] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP21990139
 

9Y-0283: FITTING GP-FUEL

9Y0283 FITTING GP-FUEL
SEBP21990139 SEBP2199
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-4924 [2] ELBOW-O-RING  
  3J-1907 [2] SEAL-O-RING  
 

Information:

Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Systems Operation
Fuel Transfer Pump
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Fuel System Pressure - Test
3114, 3116, and 3126 Engines
Disassembly and Assembly
Fuel Priming Pump
3116 ENGINE SUPPLEMENT FOR 320, 320L & 320N EXCAVATORS
Fuel Priming Pump & Primary Fuel Filter
3116 ENGINE SUPPLEMENT FOR 320, 320L & 320N EXCAVATORS
Governor & Fuel Transfer Pump
3116 ENGINE SUPPLEMENT FOR 320, 320L & 320N EXCAVATORS
Fuel Transfer Pump - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/05
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 320 L :

4I-1926 PUMP AR-FUEL TRANSFER
114-5269 PUMP AR-FUEL TRANSFER
PUMP GP-FUEL INJECTION
7E-9711 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRM & PRIM FILTER
129-1106 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-UNIT INJECTION
7E-7607 PUMP GP-UNIT INJECTION
PUMP GP-FUEL PRM & PRIM FILTER
4P-7206 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
4P-7206 PUMP GP-FUEL PRM & PRIM FILTER
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
PUMP GP-FUEL TRANSFER
114-5271 PUMP GP-FUEL TRANSFER
WIRING GP-REFUELING PUMP
114-5270 WIRING GP-REFUELING PUMP
STRAINER GP
5C-0746 STRAINER GP
SWITCH AS-REFUELING
5C-6108 SWITCH AS-REFUELING
CONTROL GP-GOVERNOR
7Y-5470 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
102-7986 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
102-7986 CONTROL GP-GOVERNOR
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL

Truck sale:

 
 
Caterpillar 320L, Crawler Excavators, Construction


 
35,000 
Caterpillar 320L, Crawler Excavators, Construction
- Crawler Excavators
ALTORFER INC.
 
225,000 
Caterpillar 320LONG, Crawler Excavators, Construction


Caterpillar 320L, Crawler Excavators, Construction
16,500 
Caterpillar 320L, Crawler Excavators, Construction
- Crawler excavators
HOLT CAT
 
 
Caterpillar 320 L, Raupenbagger, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.