AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2P-6200 FASTENER GP-OIL PAN S/N 8TD4500-99999 PART OF 103-1208, 115-4298 ENGINE AR ALSO AN ATTACHMENT 12G


BASIC ENGINE
PAN GP-OIL
FLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
CYLINDER HEAD GP
HOUSING GP-FRONT

MOTOR GRADER 12G MOTOR GRADER 3PL
 12G Motor Grader 3PL00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2200 12G 3PL   (1993)

BASIC ENGINE

PAN GP-OIL
FASTENER GP-OIL PAN
2P-6200 FASTENER GP-OIL PAN
PAN GP-OIL
2P-9647 PAN GP-OIL
 

#SEBP22000030
 

2P-6200: FASTENER GP-OIL PAN

2P-6200 FASTENER GP-OIL PAN
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00125141 SEBP2200
2P6200 FASTENER GP-OIL PAN Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8535 [18] BOLT-LOCKING (3/8-16X0.875-IN)  
2. 5M-2894 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 0S-1591 B [20] BOLT (3/8-16X1.5-IN)  
4. 3B-1915 B [13] BOLT (3/8-16X1.375-IN)  
5. 0L-1143 B [5] BOLT (3/8-16X2.5-IN)  
6. 0L-1352 [3] BOLT (3/8-16X3.25-IN)  
7. 2A-4639 B [7] BOLT (3/8-16X1.625-IN)  
8. 0T-0573 B [5] BOLT (3/8-16X2.75-IN)  
9. 5M-2894 B [28] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP22000031
 

1P-9581: FLYWHEEL GP

1P-9581 FLYWHEEL GP
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00144040 SEBP2200
1P9581 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-9310 [1] FLYWHEEL AS  
2. 7N-9145 [1] GEAR (130-TEETH)  
3. 0S-1576 [9] BOLT (5/8-18X2-IN)  
 

#SEBP22000032
 

1W-5634: GEAR GP-FRONT

1W-5634 GEAR GP-FRONT
S/N 8TD4500-99999
PART OF 103-1208 ENGINE AR
i00144056 SEBP2200
1W5634 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 C [1] BOLT (5/8-11X2-IN)  
  7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
2. 7W-0508 C [1] GEAR-FUEL PUMP DRIVE (80-TEETH)  
3. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
4. 7N-4791 [1] GEAR AS-FUEL PUMP IDLER (57-TEETH)(57 TEETH)  
  5S-7630 [1] BUSHING  
5. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
  5S-7611 [1] LOCK-SHAFT  
6. 1W-4402 [1] GEAR-CAMSHAFT (80-TEETH)(80 TEETH)  
7. 8N-4959 [1] SHAFT-DRIVE IDLER  
8. 8N-4960 [1] PLATE-THRUST  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 7W-0449 [1] GEAR-PUMP IDLER (60 TEETH)  
  2P-1168 [1] BUSHING  
11. 0S-1748 [4] BOLT (3/8-24X2-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22000033
 

1W-5634: GEAR GP-FRONT

1W-5634 GEAR GP-FRONT
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00125129 SEBP2200
1W5634 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [1] BOLT (5/8-11X2-IN)  
  7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
2. 7W-0508 [1] GEAR-FUEL PUMP DRIVE (80-TEETH)  
3. 0S-1594 C [2] BOLT (3/8-16X1-IN)  
  5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 106-4497 C [1] GEAR AS-FUEL PUMP IDLER (57-TEETH)  
  2S-6692 C [1] BUSHING  
5. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
6. 1W-4402 [1] GEAR-CAMSHAFT (80-TEETH)  
7. 105-9772 [1] SHAFT-DRIVE IDLER  
8. 8N-4960 [1] PLATE-THRUST  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 7N-4722 [1] GEAR AS-IDLER (60-TEETH)  
  2P-1168 [1] BUSHING  
11. 0S-1748 [4] BOLT (3/8-24X2-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22000034
 

2P-6166: HOUSING GP-FLYWHEEL

2P-6166 HOUSING GP-FLYWHEEL
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00144109 SEBP2200
2P6166 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-9322 [1] HOUSING-FLYWHEEL  
2. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
3. 9H-5921 [1] GASKET  
4. 0S-1587 [13] BOLT (1/2-13X1.75-IN)  
5. 2B-0858 C [1] PLUG-PIPE  
6. 5F-0304 [1] PLUG  
7. 2A-1162 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22000035
 

8N-0303: HOUSING GP-FRONT

8N-0303 HOUSING GP-FRONT
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00125372 SEBP2200
8N0303 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0923 [1] HOUSING AS-FRONT  
2. 9X-2485 [6] STUD  
3. 1W-7816 [1] PLATE AS  
  5M-6214 [1] PLUG (1/8-27 PTF)  
4. 6H-0192 [3] STUD  
5. 8N-0110 [1] GASKET-FRONT PLATE  
6. 1W-3900 [1] GASKET  
 

#SEBP22000036
 

398-9357: KIT-CYLINDER HEAD

398-9357 KIT-CYLINDER HEAD
S/N 3PL1-99999
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FIELD INSTALLATION
i05266884 SEBP2200
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  148-7425 [12] GUIDE-VALVE (STANDARD)  
  154-6997 AB GUIDE-VALVE (0.51-MM OS)  
  154-6998 AB GUIDE-VALVE (0.13-MM OS)  
  107-0265 [6] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  107-0268 [6] INSERT-VALVE SEAT (INLET)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  2A-4429 [24] LOCK-RETAINER  
  8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
  8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
  1W-5300 [12] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
  7N-8018 [6] SEAL  
  9Y-1798 [18] SEAL  
  3S-5496 [2] SEAL-O-RING  
  7S-7144 [12] SPRING-VALVE  
  148-7455 [6] VALVE-EXHAUST  
  100-7860 [6] VALVE-INLET  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP22000037
 

391-8935: KIT-CYLINDER HEAD GASKET

391-8935 KIT-CYLINDER HEAD GASKET -SINGLE
S/N 3PL1-99999
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT, AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FIELD INSTALLATION
i05372122 SEBP2200
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-0451 [1] GASKET (TURBOCHARGER)  
  5S-6735 [2] GASKET  
  7M-7273 [1] GASKET (TURBOCHARGER)  
  7N-0200 [1] GASKET  
  7N-0944 [1] GASKET (WATER TEMPERATURE REGULATOR)  
  8H-9788 [1] GASKET  
  188-6126 [1] GASKET  
  111-8015 [1] GASKET AS-CYLINDER HEAD  
  2P-6132 [1] GASKET-ELBOW  
  9Y-1979 [3] GASKET-MANIFOLD  
  1P-1255 [1] GASKET-OIL DRAIN  
  1S-4810 [2] GASKET-OIL DRAIN (TURBOCHARGER)  
  1S-6595 [1] GASKET-OIL SUPPLY  
  115-7550 [1] GASKET-PLATE  
  9N-3241 [1] GASKET-REGULATOR HOUSING  
  7N-8018 [6] SEAL  
  9Y-1798 [18] SEAL  
  1H-1023 [6] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  3J-7354 [3] SEAL-O-RING  
  3S-5496 [2] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8H-2046 [1] SEAL-O-RING  
  8M-4448 [1] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
  133-1247 [1] SEAL-VALVE COVER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP22000038
 

392-0637: KIT-CYLINDER HEAD GASKET

392-0637 KIT-CYLINDER HEAD GASKET
S/N 3PL1-99999
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION
i06146420 SEBP2200
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7L-6443 [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
  9L-2295 [2] BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)  
  1H-7666 [1] GASKET  
  1P-0451 [1] GASKET  
  5S-6735 [2] GASKET  
  7N-0200 [1] GASKET  
  7N-0944 [1] GASKET  
  2F-7761 [1] GASKET  
  188-6126 [1] GASKET  
  111-8015 [1] GASKET AS-CYLINDER HEAD  
  2P-6132 [1] GASKET-ELBOW  
  9Y-1979 [3] GASKET-MANIFOLD  
  1P-1255 [1] GASKET-OIL DRAIN  
  115-7550 [1] GASKET-PLATE  
  391-2167 [4] LOCKNUT-FLANGE (3/8X16-THD)  
  6N-0009 [1] RING-METAL SEAL  
  6N-0992 [1] RING-METAL SEAL  
  7N-8018 [6] SEAL  
  9Y-1798 [18] SEAL  
  3K-0360 [2] SEAL-O-RING  
  3J-1907 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3S-5496 [2] SEAL-O-RING  
  8H-2046 [1] SEAL-O-RING  
  8M-4448 [1] SEAL-O-RING  
  133-1247 [1] SEAL-VALVE COVER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP22000039
 

430-4633: KIT-FRONT COVER GASKET

430-4633 KIT-FRONT COVER GASKET
S/N 3PL1-99999
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION
i06124141 SEBP2200
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1W-3900 [1] GASKET  
  6L-1883 [1] GASKET  
  8M-7065 [1] GASKET (AIR INLET)  
  2P-2720 [1] GASKET  
  8N-0110 [1] GASKET-FRONT PLATE  
  6N-7887 [1] GASKET-HOUSING COVER  
  2P-0220 [1] GASKET-PUMP  
  362-8853 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)(FRONT)  
  6V-9748 [1] SEAL-LIP TYPE  
  5P-6718 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  2H-3932 [1] SEAL-O-RING  
  175-7900 [1] SEAL-O-RING  
  2P-1692 [1] SEAL-O-RING  
  175-7904 [2] SEAL-O-RING  
  5F-7054 [1] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
 

Information:

Caterpillar Parts SIS Catalog 12G :

FASTENER GP-FRONT HOUSING
8N-0872 FASTENER GP-FRONT HOUSING
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
DRIVE GP-FAN
6N-4599 DRIVE GP-FAN
DRIVE GP-FAN
3P-0059 DRIVE GP-FAN
DAMPER GP
4N-3238 DAMPER GP
DAMPER GP
1P-9579 DAMPER GP
CYLINDER HEAD GP
7N-8876 CYLINDER HEAD GP
CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
FLYWHEEL GP
1P-9581 FLYWHEEL GP
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
HOUSING GP-FLYWHEEL
2P-6166 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
398-9357 KIT-CYLINDER HEAD
391-8935 KIT-CYLINDER HEAD GASKET
392-0637 KIT-CYLINDER HEAD GASKET

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.