7C-8993 FASTENER GP-FUEL INJ PUMP S/N 8TD4500-99999 PART OF 2W-6229 PUMP GP-GOV & FUEL INJ ALSO AN ATTACHMENT 12G



FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
PUMP GP-FUEL INJECTION
LINES GP-FUEL
LINES GP-DRAIN
LINES GP-FUEL INJECTION

MOTOR GRADER 12G MOTOR GRADER 3PL
 12G Motor Grader 3PL00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2200 12G 3PL   (1993)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
392-9232 KIT-FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2837 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
2W-6229 PUMP GP-GOV & FUEL INJ
 

#SEBP22000090
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 8TD4500-99999
PART OF 2W-6229 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00125304 SEBP2200
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT (1/4-20X2-IN)  
2. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
4. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
5. 4F-7957 C [8] BOLT (1/4-20X0.875-IN)  
6. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
7. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
8. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22000091
 

2W-3282: FILTER GP-SECONDARY FUEL

2W-3282 FILTER GP-SECONDARY FUEL
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00125150 SEBP2200
2W3282 FILTER GP-SECONDARY FUEL Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7N-9519 [1] BASE AS-FUEL FILTER  
2. 5M-6214 [1] PLUG (1/8-27 PTF)  
3. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
5. 4W-9057 C [1] TUBE AS  
6. 030-7947 [1] ADAPTER-ELBOW  
7. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 7N-9520 [1] GASKET  
9. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
10. 5P-4289 [1] ELBOW  
11. 3J-1907 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22000092
 

7W-1488: GOVERNOR GP

7W-1488 GOVERNOR GP
S/N 8TD4500-99999
PART OF 2W-6229 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00431691 SEBP2200
7W1488 GOVERNOR GP Parts scheme 7W1488 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT (8-32X0.5-IN)  
2. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
3. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 2W-5161 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 8L-5832 C [1] NUT-HEX (10-32-THD)  
8. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
9. 8N-3258 [1] COVER-LOAD STOP  
  8N-3264 [1] GASKET  
10. 1P-2497 [2] BOLT-HEAD (10-24X1-IN)  
11. 3P-0009 [1] INSULATOR  
12. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
13. 4N-5485 [1] BODY-VALVE  
14. 4N-5484 [1] VALVE-NEEDLE  
15. 6H-9691 [1] SEAL-O-RING  
16. 5F-9144 [1] SEAL-O-RING  
17. 1W-6523 [1] PLUG  
18. 8N-3259 [1] COVER-HIGH IDLE  
  8N-3263 [1] GASKET  
19. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
20. 3J-7354 [1] SEAL-O-RING  
21. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
22. 7N-8780 [1] COVER AS-CONTROL  
23. 5P-3272 [1] SEAL-LIP TYPE  
24. 7N-8779 [1] GASKET-COVER  
25. 8N-2501 [1] HOUSING AS-GOVERNOR (REAR)  
  7E-5346 [1] VALVE AS  
  2F-2290 [1] PLUG-CORE  
26. 4N-0260 [1] SEAL-LIP TYPE  
27. 3D-8317 [1] RING-RETAINING  
28. 8N-2499 [1] SPRING-GUIDE  
29. 7N-8821 [1] RING-RETAINING  
30. 7W-2000 C [1] STOP-DETENT  
31. 6V-8137 [2] SCREW-BUTTON HEAD (10-24X1-IN)  
  7W-1318 [1] PLATE-RETAINING  
32. 2W-7400 [1] SPRING  
33. 2W-9996 [1] SCREW-IDLE STOP (1/4-20X1.25-IN)  
  7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
34. 8N-2496 [1] GASKET-GOVERNOR HOUSING  
35. 1N-3800 [1] SLEEVE-RACK CONTROL  
36. 6N-3504 [1] SEAT-GOVERNOR SPRING  
37. 2W-2216 [1] SPRING-LINK  
38. 2M-7819 [2] RING-RETAINING  
39. 1N-3802 [1] SEAT-SPRING  
40. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 C [1] CYLINDER AS  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
41. 1W-4098 [1] PISTON-GOVERNOR SERVO  
42. 7W-0250 C [1] SLEEVE  
43. 5P-9757 [1] SEAL-O-RING  
44. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
45. 4N-2953 [1] RING-LOCK  
46. 7E-4892 [2] RACE-THRUST BEARING  
47. 7M-7219 [1] BEARING-THRUST  
48. 4W-6868 [1] RISER-GOVERNOR  
49. 4N-0432 [1] BALL BEARING  
50. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM LG)  
  4F-6024 [2] PIN (8MM LG)  
51. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
52. 4N-6404 [1] RING-RETAINING  
53. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
54. 2N-0828 [2] WASHER  
55. 7N-8785 [1] SHAFT-PIVOT  
56. 7N-8821 [2] RING-RETAINING  
57. 7N-7270 [2] SLEEVE-SPRING  
58. 3K-5733 [1] SPRING  
59. 7N-7267 [1] SPRING  
60. 2W-9305 [1] PLATE-THROTTLE  
61. 7W-1321 [1] PLATE-THROTTLE  
62. 8N-3168 [1] LEVER-THROTTLE  
63. 2W-6102 [1] LEVER-SPRING SEAT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22000093
 

392-9232: KIT-FUEL INJECTION PUMP

392-9232 KIT-FUEL INJECTION PUMP
S/N 3PL1-99999
OPTIONAL REBUILD FUEL PUMP KIT FOR 3306 ENGINE
FIELD INSTALLATION
i05266065 SEBP2200
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  1W-6539 Y [6] PUMP GP-FUEL INJECTION  
   
  4N-0432 [1] BALL BEARING  
  1S-1953 [1] BEARING-RACK  
  1W-3285 [1] BEARING-RACK  
  7L-3326 [1] BEARING-THRUST  
  7M-7219 [1] BEARING-THRUST  
  4P-9828 [1] BUSHING  
  7N-7970 [1] BUSHING  
  8N-3945 [1] BUSHING-TERMINAL  
  8N-5117 [6] BUSHING-TERMINAL  
  5F-2807 [6] CAP-SEALING  
  6I-1564 [1] DIAPHRAGM  
  1S-5440 [4] DOWEL  
  4N-9019 [1] DOWEL  
  6I-2003 [1] GASKET  
  6I-2004 [1] GASKET  
  7N-9520 [1] GASKET  
  144-0477 [1] GASKET  
  150-3724 [1] GASKET  
  150-3726 [1] GASKET  
  150-3728 [1] GASKET  
  150-3730 [1] GASKET  
  150-3727 [1] GASKET-FUEL  
  3P-0009 [1] INSULATOR  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
  7N-2172 [2] PIN  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7E-4892 [2] RACE-THRUST BEARING  
  7N-7166 [2] RACE-THRUST BEARING  
  4N-2953 [1] RING-LOCK  
  2M-7819 [2] RING-RETAINING  
  3D-8317 [1] RING-RETAINING  
  7N-2171 [4] RING-RETAINING  
  7N-8421 [1] RING-RETAINING  
  7N-8821 [3] RING-RETAINING  
  8F-4610 [1] RING-RETAINING  
  8N-6680 [1] SCREEN AS  
  8N-5763 [1] SEAL  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [1] SEAL-LIP TYPE  
  2D-6392 [1] SEAL-O-RING  
  2H-3934 [1] SEAL-O-RING  
  3E-6760 [1] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  4J-7533 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  5P-6620 [1] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  5P-8210 [1] SEAL-O-RING  
  5P-9757 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  8J-8343 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  033-5879 [1] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  114-8718 [6] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
  6N-3504 [1] SEAT-GOVERNOR SPRING  
  8N-3088 [1] SHAFT AS-THROTTLE  
  8N-2510 [1] SHAFT-WEIGHT CARRIER  
  7W-0250 [1] SLEEVE  
  4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
  2N-2878 [1] SPRING  
  2W-7400 [1] SPRING  
  3K-5733 [1] SPRING  
  7L-8056 [1] SPRING  
  8L-9790 [1] SPRING  
  8M-9140 [1] SPRING  
  8M-9141 [1] SPRING  
  8N-9594 [1] SPRING  
  9N-1754 [1] SPRING  
  7L-4958 [1] SPRING-GOVERNOR  
  8N-2499 [1] SPRING-GUIDE  
  7E-5346 [1] VALVE AS  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  2N-0828 [2] WASHER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  7N-7264 [4] WEIGHT-GOVERNOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22000094
 

5T-5032: LINES GP-FUEL

5T-5032 LINES GP-FUEL
S/N 3PL1-99999
PART OF 103-0782, 8W-2425 CHASSIS AR
ALSO AN ATTACHMENT
i00144221 SEBP2200
5T5032 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 6B-5072 [1] ADAPTER  
2. 6K-1972 [1] ELBOW-FLARED  
3. 2G-4706 I [1] HOSE AS  
4. 3S-2093 [1] STRAP-CABLE  
5. 7D-5363 [1] CONNECTOR (9/16-18-THD)  
6. 5P-4620 C [1] CLIP  
7. 5K-5338 C [3] CLIP (LOOP)  
8. 2S-5100 [1] VALVE-MANUAL  
9. 8N-7140 I [1] HOSE AS  
10. 005-4362 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
11. 5S-7379 C [1] BOLT (3/8-16X0.875-IN)  
12. 9B-7237 C [2] BOLT (3/8-16X1.25-IN)  
13. 8T-4896 C [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22000095
 

2W-4012: LINES GP-FUEL DRAIN

2W-4012 LINES GP-FUEL DRAIN
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00144131 SEBP2200
2W4012 LINES GP-FUEL DRAIN Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 4W-7629 C [1] COVER  
2. 6K-9194 [1] ELBOW  
3. 2T-0676 I [1] HOSE AS-DRAIN  
4. 030-7946 [1] ELBOW  
5. 3J-7354 [1] SEAL-O-RING  
6. 030-7947 [1] ADAPTER-ELBOW  
7. 3J-1907 [1] SEAL-O-RING  
8. 4M-8303 C [1] SEAL-O-RING  
9. 0S-1615 C [2] BOLT (1/4-20X0.75-IN)  
  5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22000096
 

1W-3008: LINES GP-FUEL INJECTION

1W-3008 LINES GP-FUEL INJECTION
S/N 8TD4500-99999
PART OF 2W-5261 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00144049 SEBP2200
1W3008 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8N-7005 [6] INJECTOR GP-FUEL  
    (EACH INCLUDES)
  8C-3234 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER  
2. 7W-4486 [1] WASHER (9.76X17.14X1.8-MM THK)  
3. 9L-9098 [1] SEAL-CARBON STOP  
4. 1T-0416 [6] BOLT (5/16-18X0.75-IN)  
5. 8N-5132 [6] CLAMP-NOZZLE  
6. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 4P-9330 Y [1] LINES GP-FUEL INJECTION  
9. 4P-9331 YC [1] LINES GP-FUEL INJECTION  
10. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
11. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
12. 7U-4898 C [1] SCREW (3/8-16X0.75-IN)  
13. 4P-2578 C [1] BRACKET  
14. 1W-9169 C [1] CLAMP-FUEL LINE (THREADED)  
  1W-9167 C [1] CLAMP AS-FUEL LINE  
15. 9N-3388 C [1] BOLT (10-24X0.75-IN)  
  4B-4274 C [1] WASHER (5.5X13X1.2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22000097
 

2W-5261: LINES GP-FUEL INJECTION

2W-5261 LINES GP-FUEL INJECTION
S/N 8TD4500-99999
PART OF 103-1208, 115-4298 ENGINE AR
ALSO AN ATTACHMENT
i00144132 SEBP2200
2W5261 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 1W-3008 Y [1] LINES GP-FUEL INJECTION  
2. 3S-2713 [3] NUT-FULL (3/8-24-THD)  
3. 6V-6921 [1] SEAL-RING  
4. 2H-3934 [1] SEAL-O-RING  
5. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
6. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
7. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
8. 5F-7054 [1] SEAL-O-RING  
9. 2H-3932 [1] SEAL-O-RING  
10. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
11. 8M-5248 [2] SEAL-O-RING  
12. 8M-5253 [1] SEAL-O-RING  
13. 9S-4185 [2] PLUG (3/4-16-THD)  
14. 4W-1512 [1] SUPPORT AS-PUMP  
  5H-4279 [1] PLUG-CUP  
  8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
15. 9S-8002 [1] PLUG (7/16-20-THD)  
16. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 3K-0360 [2] SEAL-O-RING  
18. 3J-7354 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22000098
 

4P-9330: LINES GP-FUEL INJECTION

4P-9330 LINES GP-FUEL INJECTION
S/N 8TD4500-5681
PART OF 1W-3008 LINES GP-FUEL INJECTION
i00144204 SEBP2200
4P9330 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 4P-9381 [1] LINE AS-FUEL INJECTION  
2. 4P-9382 [1] LINE AS-FUEL INJECTION  
3. 4P-9383 [1] LINE AS-FUEL INJECTION  
4. 4P-9384 [1] LINE AS-FUEL INJECTION  
5. 1W-9169 [10] CLAMP-FUEL LINE (THREADED)  
6. 1W-9168 [7] CLAMP-FUEL LINE (NON-THREADED)  
7. 5P-4939 [7] SCREW-MACHINE (10-24X15.88-IN)  
8. 9N-3388 [3] BOLT (10-24X0.75-IN)  
9. 1W-9167 [3] CLAMP AS-FUEL LINE  
    (EACH INCLUDES)
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
10. 7C-7614 [1] BRACKET AS  
11. 9Y-7524 [1] PLATE  
12. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
 

#SEBP22000099
 

4P-9330: LINES GP-FUEL INJECTION

4P-9330 LINES GP-FUEL INJECTION
S/N 8TD5682-99999
PART OF 1W-3008 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00125188 SEBP2200
4P9330 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 4P-9381 [1] LINE AS-FUEL INJECTION  
2. 4P-9382 [1] LINE AS-FUEL INJECTION  
3. 104-4253 C [1] LINE AS-FUEL INJECTION  
4. 104-4254 C [1] LINE AS-FUEL INJECTION  
5. 1W-9169 [9] CLAMP-FUEL LINE (THREADED)  
6. 1W-9168 [7] CLAMP-FUEL LINE (NON-THREADED)  
7. 5P-4939 [6] SCREW-MACHINE (10-24X15.88-IN)  
8. 9N-3388 [3] BOLT (10-24X0.75-IN)  
9. 1W-9167 C [2] CLAMP AS-FUEL LINE  
    (EACH INCLUDES)
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
10. 7C-7614 [1] BRACKET AS  
11. 4B-4274 [3] WASHER (5.5X13X1.2-MM THK)  
12. 9Y-7524 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog 12G :

CONTROL GP-GOVERNOR
8W-1990 CONTROL GP-GOVERNOR
PIPE GP-EXHAUST
2W-9093 PIPE GP-EXHAUST
MUFFLER GP
6N-5252 MUFFLER GP
MUFFLER GP
4N-8296 MUFFLER GP
MANIFOLD GP-EXHAUST
2P-6572 MANIFOLD GP-EXHAUST
LINES GP-AIR
1P-9585 LINES GP-AIR
FASTENER GP-EXHAUST MANIFOLD
1W-4486 FASTENER GP-EXHAUST MANIFOLD
EXTENSION GP-EXHAUST
4N-8298 EXTENSION GP-EXHAUST
FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
GOVERNOR GP
7W-1488 GOVERNOR GP
392-9232 KIT-FUEL INJECTION PUMP
LINES GP-FUEL
5T-5032 LINES GP-FUEL
LINES GP-FUEL DRAIN
2W-4012 LINES GP-FUEL DRAIN
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
2W-5261 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT