AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-4563 GEAR GP-FRONT S/N 08Z71874-89170 TIMING PART OF 4P-4730 ENGINE AR 615C WHEEL SCRAPER


BASIC ENGINE
GEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
CYLINDER HEAD GP
SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILD

WHEEL SCRAPER 615C WHEEL SCRAPER 2XG
 615C Series II Wheel Tractor-Scraper 2XG00898-UP (MACHINE) POWERED BY 3306 Engine SEBP2201 615C 2XG   (1988)

BASIC ENGINE

GEAR GP
GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
GEAR GP-FRONT
4P-9858 GEAR GP-FRONT
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
 

#SEBP22010050
 

1W-4563: GEAR GP-FRONT

1W-4563 GEAR GP-FRONT
S/N 08Z71874-89170
TIMING
PART OF 4P-4730 ENGINE AR
i00148457 SEBP2201
1W4563 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2602 [1] BOLT (5/8-11X2-IN)  
  7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
2. 9N-5760 Y [1] DAMPER GP (80 TEETH)  
3. 0S-1594 [2] BOLT (3/8-16X1-IN)  
4. 196-0029 C [1] GEAR AS-IDLER (57-TEETH)  
  195-0302 [1] BUSHING  
5. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
6. 1W-4402 [1] GEAR-CAMSHAFT (80-TEETH)  
7. 170-7502 [1] SHAFT-DRIVE IDLER  
8. 8N-4960 [1] PLATE-THRUST  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 196-0223 C [1] GEAR AS-IDLER (60-TEETH)  
  196-9988 [1] BUSHING  
11. 0S-1748 [4] BOLT (3/8-24X2-IN)  
12. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22010051
 

4P-9858: GEAR GP-FRONT

4P-9858 GEAR GP-FRONT
S/N 6NC1-UP; R6J1-UP; 08Z89171-99999; 10Z46580-UP
TIMING
PART OF 125-1354, 275-7767 ENGINE AR
i00122114 SEBP2201
4P9858 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2602 [1] BOLT (5/8-11X2-IN)  
2. 7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
3. 8N-4960 [1] PLATE-THRUST  
4. 0S-1618 [2] BOLT (5/16-18X1-IN)  
5. 170-7502 C [1] SHAFT-DRIVE IDLER  
6. 0S-1748 [4] BOLT (3/8-24X2-IN)  
7. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 196-0224 [1] GEAR AS-IDLER (50-TEETH)  
  196-9988 [1] BUSHING  
9. 4P-7826 [1] GEAR-CAMSHAFT (66-TEETH)  
10. 4P-7822 [1] WEIGHT AS  
10A. 9N-5766 [2] WEIGHT  
10B. 1W-5879 [2] SPRING (54.6MM LONG)  
10C. 1W-5878 [2] SPRING (35.7MM LONG)  
10D. 9N-5767 [2] SLIDE  
10E. 9N-5765 [1] PLATE-END  
10F. 4B-1273 [2] SCREW-MACHINE (10-24X0.5-IN)  
10G. 8N-0498 [1] SEAL-FACE  
10H. 6F-4718 [1] SEAL-O-RING  
11. 0S-1594 C [2] BOLT (3/8-16X1-IN)  
12. 196-0028 [1] GEAR AS-IDLER (47-TEETH)  
  195-0302 [1] BUSHING  
13. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22010052
 

2P-6166: HOUSING GP-FLYWHEEL

2P-6166 HOUSING GP-FLYWHEEL
S/N 6NC1-UP; R6J1-UP; 08Z69300-99999; 10Z46580-UP
PART OF 125-1354, 275-7767, 4P-4730 ENGINE AR
i00122023 SEBP2201
2P6166 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-9322 [1] HOUSING-FLYWHEEL  
2. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
3. 9H-5921 [1] GASKET  
4. 0S-1587 [13] BOLT (1/2-13X1.75-IN)  
5. 8T-6762 C [1] PLUG-PIPE (1/2-14-THD)  
6. 5F-0304 [2] PLUG  
7. 2A-1162 [2] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22010053
 

8N-0303: HOUSING GP-FRONT

8N-0303 HOUSING GP-FRONT
S/N 6NC1-UP; R6J1-UP; 08Z69300-99999; 10Z46580-UP
PART OF 125-1354, 275-7767, 4P-4730 ENGINE AR
i00122460 SEBP2201
8N0303 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0923 [1] HOUSING AS-FRONT  
2. 9X-2485 [6] STUD  
3. 1W-7816 [1] PLATE AS  
  5M-6214 [1] PLUG (1/8-27 PTF)  
4. 6H-0192 [3] STUD  
5. 8N-0110 [1] GASKET-FRONT PLATE  
6. 1W-3900 [1] GASKET  
 

#SEBP22010054
 

398-9357: KIT-CYLINDER HEAD

398-9357 KIT-CYLINDER HEAD
S/N 2XG898-UP; 9XG1-UP
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FOR USE WITH @@@@@275-7767@@@@@, @@@@@125-1354@@@@@, @@@@@ 4P-4730@@@@@
FIELD INSTALLATION
i05266701 SEBP2201
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  148-7425 [12] GUIDE-VALVE (STANDARD)  
  154-6997 AB GUIDE-VALVE (0.51-MM OS)  
  154-6998 AB GUIDE-VALVE (0.13-MM OS)  
  107-0265 [6] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  107-0268 [6] INSERT-VALVE SEAT (INLET)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  2A-4429 [24] LOCK-RETAINER  
  8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
  8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
  1W-5300 [12] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
  7N-8018 [6] SEAL  
  9Y-1798 [18] SEAL  
  3S-5496 [2] SEAL-O-RING  
  7S-7144 [12] SPRING-VALVE  
  148-7455 [6] VALVE-EXHAUST  
  100-7860 [6] VALVE-INLET  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP22010055
 

20R-1435: KIT-ENGINE OVERHAUL

20R-1435 KIT-ENGINE OVERHAUL -GOLD
S/N 6NC1-UP; R6J1-UP; 08Z69300-99999; 10Z46580-UP
PART OF 125-1354, 275-7767, 4P-4730 ENGINE AR
FOR USE WITH @@@@@125-1354@@@@@, @@@@@275-7767@@@@@, @@@@@ 4P-4730@@@@@
i04939480 SEBP2201
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  393-2824 Y [1] KIT-ENGINE OVERHAUL (BRONZE)  
  10R-9259 [6] CYLINDER PACK AS  
    (EACH INCLUDES)
  6I-0497 [1] RING-PISTON (OIL)  
  110-5800 [1] LINER-CYLINDER BLOCK  
  7N-9805 [1] PIN-PISTON  
  238-2703 [1] BODY AS-PISTON  
  0R-0914 [1] ROD AS-CONNECTING  
  1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT (1/2-20-THD)  
  8N-1849 [1] BEARING-CONNECTING ROD  
  1S-9543 [2] RETAINER-PIN  
  2W-1707 [1] RING-PISTON (TOP)  
  2W-1708 [1] RING-PISTON (INTERMEDIATE)  
  5P-8768 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
  2W-6134 [1] BAND-FILLER  
  5S-6670 [3] SEAL-O-RING  
  393-1024 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22010056
 

20R-1466: KIT-ENGINE OVERHAUL

20R-1466 KIT-ENGINE OVERHAUL -PLATINUM
S/N 6NC1-UP; 08Z89171-99999
PART OF 125-1354 ENGINE AR
FOR USE WITH @@@@@125-1354@@@@@
i04940141 SEBP2201
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  393-2824 Y [1] KIT-ENGINE OVERHAUL (BRONZE)  
   
  0R-0920 [1] PUMP GP-ENGINE OIL  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  [1] BODY AS-OIL PUMP  
  8S-6511 [2] BUSHING  
  [1] BODY AS-OIL PUMP  
  8S-6511 [2] BUSHING  
  6N-1036 [2] GEAR (8-TEETH)  
  8S-0493 [1] SHAFT AS-PUMP  
  8S-0490 [1] SHAFT  
  2P-1781 [1] SPACER (0.24-MM THK)  
  4B-9880 [1] BALL  
  4N-3732 [1] COVER-VALVE  
  4P-3546 [1] VALVE AS-RELIEF (ENGINE OIL PUMP)  
  6I-1345 [1] SHAFT AS-OIL PUMP  
  0T-0065 [3] BOLT (3/8-16X3.5-IN)  
  1B-8709 [1] KEY-WOODRUFF  
  1F-1006 [1] DOWEL  
  2B-2694 [1] BOLT (5/16-18X2-IN)  
  2P-1170 [1] SHAFT AS-GEAR  
  4B-9782 [1] BALL  
  0R-0997 [1] PUMP GP-WATER  
  172-0038 [1] GASKET  
  176-1250 [1] PUMP GP-WATER  
  1K-6985 [1] RING-RETAINING  
  6H-3957 [1] BALL BEARING  
  8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
  154-4482 [1] SEAL-LIP TYPE  
  169-1750 [1] SEAL GP  
  172-5189 [1] IMPELLER-PUMP  
  172-5185 [1] SHAFT-WATER PUMP  
  208-4836 [1] KIT-GASKET (WATER PUMP)  
  2P-0406 [1] GASKET  
  2P-6132 [1] GASKET-ELBOW  
  5F-3106 [1] SEAL-O-RING  
  7N-0200 [1] GASKET  
  9M-4849 [1] SEAL-O-RING  
  380-7575 [1] KIT-GASKET (WATER PUMP)  
  0L-1351 [2] BOLT (3/8-16X0.875-IN)  
  4P-7831 [1] GEAR AS-PUMP (33-TEETH)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  6H-3957 [1] BALL BEARING  
  6K-3771 [1] BOLT-12 POINT HEAD (7/16-14X1.5-IN)  
  0R-2549 [1] CYLINDER HEAD GP  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5S-6735 [1] GASKET  
  103-2454 [12] SPRING-VALVE  
  100-7860 [6] VALVE-INLET  
  148-7455 [6] VALVE-EXHAUST  
  0R-0836 [1] CYLINDER HEAD AS  
  8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
  107-0265 [6] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  107-0268 [6] INSERT-VALVE SEAT (INLET)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  148-7425 [12] GUIDE-VALVE (STANDARD)  
  154-6997 AB GUIDE-VALVE (0.51-MM OS)  
  154-6998 AB GUIDE-VALVE (0.13-MM OS)  
  3B-0623 [6] PLUG-CUP  
  3B-0645 [7] PLUG-CUP  
  3P-1896 [13] PLUG-CUP  
  8N-4485 [1] VALVE AS-VENT  
  8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
  0S-1594 [4] BOLT (3/8-16X1-IN)  
  1P-6367 [1] COVER  
  1W-5300 [12] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
  2A-4429 [24] LOCK-RETAINER  
   
  0R-8782 [6] INJECTOR AS  
    (EACH INCLUDES)
  114-3362 [1] SEAL-O-RING  
  271-2489 [1] SEAL-WASHER  
  7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
  9L-9098 [1] SEAL-CARBON STOP  
  9X-2836 [1] SCREW-BUTTON HEAD  
  10R-9259 [6] CYLINDER PACK AS  
    (EACH INCLUDES)
  6I-0497 [1] RING-PISTON (OIL)  
  110-5800 [1] LINER-CYLINDER BLOCK  
  7N-9805 [1] PIN-PISTON  
  238-2703 [1] BODY AS-PISTON  
  0R-0914 [1] ROD AS-CONNECTING  
  1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT (1/2-20-THD)  
  8N-1849 [1] BEARING-CONNECTING ROD  
  1S-9543 [2] RETAINER-PIN  
  2W-1707 [1] RING-PISTON (TOP)  
  2W-1708 [1] RING-PISTON (INTERMEDIATE)  
  5P-8768 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
  2W-6134 [1] BAND-FILLER  
  5S-6670 [3] SEAL-O-RING  
  393-1024 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22010057
 

20R-1468: KIT-ENGINE OVERHAUL

20R-1468 KIT-ENGINE OVERHAUL -PLATINUM
S/N 08Z69300-89170
PART OF 4P-4730 ENGINE AR
FOR USE WITH @@@@@ 4P-4730@@@@@
i04939542 SEBP2201
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  393-2824 Y [1] KIT-ENGINE OVERHAUL (BRONZE)  
  0R-2549 [1] CYLINDER HEAD GP  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5S-6735 [1] GASKET  
  103-2454 [12] SPRING-VALVE  
  100-7860 [6] VALVE-INLET  
  148-7455 [6] VALVE-EXHAUST  
  0R-0836 [1] CYLINDER HEAD AS  
  8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
  107-0265 [6] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  107-0268 [6] INSERT-VALVE SEAT (INLET)(STANDARD)  
  AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  148-7425 [12] GUIDE-VALVE (STANDARD)  
  154-6997 AB GUIDE-VALVE (0.51-MM OS)  
  154-6998 AB GUIDE-VALVE (0.13-MM OS)  
  3B-0623 [6] PLUG-CUP  
  3B-0645 [7] PLUG-CUP  
  3P-1896 [13] PLUG-CUP  
  8N-4485 [1] VALVE AS-VENT  
  8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
  0S-1594 [4] BOLT (3/8-16X1-IN)  
  1P-6367 [1] COVER  
  1W-5300 [12] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
  2A-4429 [24] LOCK-RETAINER  
  10R-9259 [6] CYLINDER PACK AS  
    (EACH INCLUDES)
  6I-0497 [1] RING-PISTON (OIL)  
  110-5800 [1] LINER-CYLINDER BLOCK  
  7N-9805 [1] PIN-PISTON  
  238-2703 [1] BODY AS-PISTON  
  0R-0914 [1] ROD AS-CONNECTING  
  1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT (1/2-20-THD)  
  8N-1849 [1] BEARING-CONNECTING ROD  
  1S-9543 [2] RETAINER-PIN  
  2W-1707 [1] RING-PISTON (TOP)  
  2W-1708 [1] RING-PISTON (INTERMEDIATE)  
  5P-8768 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
  2W-6134 [1] BAND-FILLER  
  5S-6670 [3] SEAL-O-RING  
  393-1024 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
  0R-3418 [6] NOZZLE AS-FUEL INJECTION  
    (EACH INCLUDES)
  7W-4486 [1] WASHER (9.76X17.14X1.8-MM THK)  
  9L-9098 [1] SEAL-CARBON STOP  
  9X-2836 [1] SCREW-BUTTON HEAD  
  114-3362 [1] SEAL-O-RING  
  271-2489 [1] SEAL-WASHER  
  0R-0920 [1] PUMP GP-ENGINE OIL  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  [1] BODY AS-OIL PUMP  
  8S-6511 [2] BUSHING  
  [1] BODY AS-OIL PUMP  
  8S-6511 [2] BUSHING  
  6N-1036 [2] GEAR (8-TEETH)  
  8S-0493 [1] SHAFT AS-PUMP  
  8S-0490 [1] SHAFT  
  2P-1781 [1] SPACER (0.24-MM THK)  
  4B-9880 [1] BALL  
  4N-3732 [1] COVER-VALVE  
  4P-3546 [1] VALVE AS-RELIEF (ENGINE OIL PUMP)  
  6I-1345 [1] SHAFT AS-OIL PUMP  
  0T-0065 [3] BOLT (3/8-16X3.5-IN)  
  1B-8709 [1] KEY-WOODRUFF  
  1F-1006 [1] DOWEL  
  2B-2694 [1] BOLT (5/16-18X2-IN)  
  2P-1170 [1] SHAFT AS-GEAR  
  4B-9782 [1] BALL  
  0R-1000 [1] PUMP GP-WATER  
  172-0038 [1] GASKET  
  176-1250 [1] PUMP GP-WATER  
  172-5189 [1] IMPELLER-PUMP  
  172-5185 [1] SHAFT-WATER PUMP  
  1K-6985 [1] RING-RETAINING  
  6H-3957 [1] BALL BEARING  
  8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
  154-4482 [1] SEAL-LIP TYPE  
  169-1750 [1] SEAL GP  
  208-4836 [1] KIT-GASKET (WATER PUMP)  
  2P-0406 [1] GASKET  
  2P-6132 [1] GASKET-ELBOW  
  5F-3106 [1] SEAL-O-RING  
  7N-0200 [1] GASKET  
  9M-4849 [1] SEAL-O-RING  
  0L-1351 [2] BOLT (3/8-16X0.875-IN)  
  2W-7678 [1] GEAR AS (40-TEETH)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  6H-3957 [1] BALL BEARING  
  6K-3771 [1] BOLT-12 POINT HEAD (7/16-14X1.5-IN)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22010058
 

393-2824: KIT-ENGINE OVERHAUL

393-2824 KIT-ENGINE OVERHAUL -BRONZE
S/N 6NC1-UP; 2XG898-UP; 9XG1-UP; R6J1-UP; 08Z69300-99999; 10Z46580-UP
PART OF 125-1354, 275-7767, 4P-4730 ENGINE AR, 20R-1435, 20R-1466, 20R-1468, 398-0458 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@125-1354@@@@@, @@@@@ 4P-4730@@@@@, @@@@@275-7767@@@@@, REHS7759
ALSO FIELD INSTALLATION
i04902438 SEBP2201
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  393-1165 Y [1] KIT-TURBOCHARGER GASKET  
  393-5763 Y [1] KIT-OIL COOLER & LINES GASKET  
  8C-8741 Y [1] KIT-GASKET (REAR STRUCTURE)  
  281-0029 Y [6] KIT-GASKET (SINGLE FUEL INJECTOR SEALS)  
  391-8229 Y [1] KIT-FRONT COVER GASKET (FRONT STRUCTURE)  
  392-0166 Y [1] KIT-GASKET (SINGLE CYLINDER HEAD)  
   
  2W-9162 [1] BREATHER AS (CRANKCASE)  
  1R-1807 [1] FILTER AS-ENGINE OIL (ADVANCED EFFICIENCY)  
   
  328-5572 [6] BEARING-CONNECTING ROD (STANDARD)  
  3E-6914 [6] BOLT (3/8-16X0.87-IN)  
  7M-4046 [4] BUSHING  
  8N-4110 [1] BUSHING  
  195-0302 [1] BUSHING  
  196-9988 [1] BUSHING  
  5P-0597 [2] CLAMP-HOSE  
  5P-2230 [2] CLAMP-HOSE  
  8T-4984 [2] CLAMP-HOSE  
  9M-2904 [1] CLAMP-HOSE  
  9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  7N-9520 [1] GASKET  
  131-6645 [1] HOSE  
  0L-0364 [2] LOCK  
  8S-1491 [1] LOCK  
  2N-2766 [12] LOCKNUT (3/8-16-THD)  
  8S-8874 [1] LOCKNUT  
  5B-9079 [1] NUT-JAM (3/8-24-THD)  
  4B-3938 [2] PLUG-CUP  
  6V-3508 [2] PLUG-CUP  
  8T-6757 [6] PLUG-PIPE  
  111-8010 [1] REGULATOR-WATER TEMPERATURE  
  9H-1113 [2] RING-RETAINING  
  8N-5763 [1] SEAL  
  2D-6392 [1] SEAL-O-RING  
  2J-0157 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  3E-6760 [1] SEAL-O-RING  
  3J-1907 [4] SEAL-O-RING  
  4J-7533 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5F-7054 [1] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  5P-8210 [1] SEAL-O-RING  
  8M-5248 [2] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  8H-2778 [1] SEAL-RING  
  1M-7643 [1] SPACER (10.5X25.4X18.21-MM THK)  
  6B-7469 [1] SPACER (0.406X0.875X0.875-IN THK)  
  8M-3182 [2] SPRING  
  6V-1426 [10] STUD-TAPERLOCK (3/8-16X2.75-IN, HIGH TEMP)  
  6V-1427 [2] STUD-TAPERLOCK (3/8-16X3.54-IN)  
  106-1793 [1] STUD-TAPERLOCK (3/8-16X2.36-IN)  
  2S-6160 [11] WASHER-HARD (10.2X32X5-MM THK)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  134-0641 [1] WASHER-HARD (10.2X28.5X5-MM THK)  
  7N-0550 [2] WASHER-SPRING  
   
  391-8604 [1] KIT-GASKET (CENTRAL AND LOWER STRUCTURE)  
  2A-3398 [2] GASKET  
  2A-3541 [1] GASKET  
  2M-5407 [1] GASKET  
  2M-9780 [3] SEAL-O-RING  
  2P-8746 [1] GASKET  
  2W-4561 [1] GASKET  
  3J-1907 [1] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  4M-6480 [1] GASKET  
  4M-8303 [1] SEAL-O-RING  
  5S-8055 [2] GASKET  
  7F-7590 [1] GASKET  
  8C-3445 [1] CAP-DUST  
  8L-2786 [2] SEAL-O-RING  
  8M-0904 [1] GASKET  
  8M-5248 [2] SEAL-O-RING  
  8M-5253 [1] SEAL-O-RING  
  8N-6854 [1] GASKET  
  9M-4849 [1] SEAL-O-RING  
  9Y-6860 [1] GASKET  
  114-2687 [1] SEAL-O-RING  
  121-0145 [2] SEAL-O-RING  
  169-4199 [1] GASKET-OIL PAN  
  169-4200 [1] GASKET  
  208-4836 [1] KIT-GASKET (WATER PUMP)  
  2P-0406 [1] GASKET  
  2P-6132 [1] GASKET-ELBOW  
  5F-3106 [1] SEAL-O-RING  
  7N-0200 [1] GASKET  
  9M-4849 [1] SEAL-O-RING  
  380-7575 [1] KIT-GASKET (WATER PUMP)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  Y   SEPARATE ILLUSTRATION
 

#SEBP22010059
 

398-0458: KIT-ENGINE OVERHAUL

398-0458 KIT-ENGINE OVERHAUL -SILVER
S/N 6NC1-UP; 2XG898-UP; 9XG1-UP; R6J1-UP; 08Z69300-99999; 10Z46580-UP
PART OF 125-1354, 275-7767, 4P-4730 ENGINE AR
FOR USE WITH @@@@@ 4P-4730@@@@@, @@@@@275-7767@@@@@
ALSO FIELD INSTALLATION
i04902447 SEBP2201
  For full view, you need register

Parts for your 615C WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  393-2824 Y [1] KIT-ENGINE OVERHAUL (BRONZE)  
  5P-8768 Y [6] KIT-GASKET (SINGLE CYLINDER LINER)  
   
  165-4262 [6] BODY AS-PISTON  
    (EACH INCLUDES)
  0R-1697 [1] CYLINDER PACK GP  
  10R-9259 [1] CYLINDER PACK AS  
  270-4353 [1] KIT-CYLINDER LINER  
   
  371-5941 [6] LINER-CYLINDER  
  1S-9543 [12] RETAINER-PIN  
  2W-1707 [6] RING-PISTON (TOP)  
  2W-1708 [6] RING-PISTON (INTERMEDIATE)  
  6I-0497 [6] RING-PISTON (OIL)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Gear Group (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13

Caterpillar Parts SIS Catalog 615C :

GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
FLYWHEEL GP
2P-2505 FLYWHEEL GP
FASTENER GP-OIL PAN
2P-6200 FASTENER GP-OIL PAN
FASTENER GP-OIL PAN
175-7859 FASTENER GP-OIL PAN
FASTENER GP-FRONT HOUSING
241-3920 FASTENER GP-FRONT HOUSING
FASTENER GP-FRONT HOUSING
1W-3802 FASTENER GP-FRONT HOUSING
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
DRIVE GP-FAN
9Y-3960 DRIVE GP-FAN
GEAR GP-FRONT
4P-9858 GEAR GP-FRONT
HOUSING GP-FLYWHEEL
2P-6166 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
398-9357 KIT-CYLINDER HEAD
20R-1435 KIT-ENGINE OVERHAUL
20R-1466 KIT-ENGINE OVERHAUL
20R-1468 KIT-ENGINE OVERHAUL
393-2824 KIT-ENGINE OVERHAUL

Truck sale:

Caterpillar 615C, Construction
 
Caterpillar 615C, Construction
- Scrapers
CARTER MACHINERY COMPANY, INC.
Caterpillar 615C, Construction
 
Caterpillar 615C, Construction
- Scrapers
CARTER MACHINERY COMPANY, INC.
 
 
CATERPILLAR 615C 1994
- WHEEL TRACTOR SCRAPERS
CARTER MACHINERY
United States
 
 
CATERPILLAR 615C 1995
- WHEEL TRACTOR SCRAPERS
CARTER MACHINERY
United States
CATERPILLAR 615C 2001
 
CATERPILLAR 615C 2001
- WHEEL TRACTOR SCRAPERS
NMC CAT
11002 Sapp Bros. Dr. - Omaha - Nebrask
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.