OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP22020540
9R-7662: CONTROL GP-HYDRAULIC HAND
9R-7662 CONTROL GP-HYDRAULIC HAND
S/N 8ZK1-5999
3 LEVER FOOT
PART OF 9R-7657 HYDRAULIC AR
AN ATTACHMENT
S/N 8ZK1-5999
3 LEVER FOOT
PART OF 9R-7657 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-8801 | [1] | LEVER AS | |
| 2. | 9R-2614 | [2] | BEARING | |
| 3. | 9R-8804 | [1] | LEVER AS | |
| 4. | 9R-2614 | [2] | BEARING | |
| 5. | 8T-9000 | [3] | KNOB | |
| 6. | 9R-8806 | [1] | LEVER AS | |
| 7. | 9R-2614 | [2] | BEARING | |
| 8. | 9R-7456 | [1] | BOOT | |
| 9. | 9R-8808 | [1] | SPACER | |
| 10. | 9R-1948 | [5] | RIVET | |
| 11. | 9R-8047 | [1] | PLATE-INSTRUCTION | |
| 12. | 8T-4815 | [3] | ROD END | |
| 13. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 14. | 9R-8809 | [3] | ROD-CONTROL | |
| 15. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 9R-8818 | [1] | PEDAL AS | |
| 18. | 9R-8830 | [2] | SEAL | |
| 19. | 9R-8810 | [1] | PEDAL AS | |
| 20. | 9R-2751 B | [12] | WASHER (22.5X40X3-IN THK) | |
| 21. | 9R-8807 | [1] | SHAFT AS | |
| 22. | 9R-8823 | [1] | SUPPORT AS | |
| 23. | 9R-2614 | [2] | BEARING | |
| 24. | 9R-8820 | [1] | SUPPORT AS | |
| 25. | 9R-2614 | [2] | BEARING | |
| 26. | 9R-2807 | [8] | CLIP (RETAINER) | |
| 27. | 9R-2806 | [3] | PIN | |
| 28. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 30. | 9R-8813 | [2] | BLOCK | |
| 31. | 9R-8827 | [1] | PLATE AS | |
| 32. | 9R-3135 | [3] | PIN | |
| 33. | 9R-8816 | [1] | SHAFT AS | |
| 34. | 9R-8814 | [1] | SHAFT AS | |
| 35. | 9R-8825 | [2] | PLATE | |
| 36. | 9R-8824 | [1] | PIVOT AS | |
| 37. | 9R-2614 | [1] | BEARING | |
| 38. | 3H-3433 | [1] | PIN-SPRING | |
| 39. | 9R-8826 | [2] | PLATE | |
| 40. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP22020541
9R-7663: CONTROL GP-HYDRAULIC HAND
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-1948 | [5] | RIVET | |
| 2. | 9R-8048 | [1] | PLATE-INSTRUCTION | |
| 3. | 9R-7456 | [1] | BOOT | |
| 4. | 9R-4918 | [4] | KNOB | |
| 5. | 9R-2751 | [10] | WASHER (22.5X40X3-IN THK) | |
| 6. | 9R-2806 | [4] | PIN | |
| 7. | 9R-2807 | [4] | CLIP (RETAINER) | |
| 8. | 8T-4815 | [4] | ROD END | |
| 9. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 10. | 9R-8858 | [2] | ROD | |
| 11. | 9R-8857 | [2] | ROD | |
| 12. | 9R-8808 | [1] | SPACER | |
| 13. | 9R-8807 | [1] | SHAFT AS | |
| 14. | 9R-8849 | [1] | LEVER AS | |
| 15. | 9R-2614 | [2] | BEARING | |
| 16. | 9R-8850 | [1] | LEVER AS | |
| 17. | 9R-2614 | [1] | BEARING | |
| 18. | 9R-8851 | [1] | LEVER AS | |
| 19. | 9R-2614 | [1] | BEARING | |
| 20. | 9R-8852 | [1] | LEVER AS | |
| 21. | 9R-2614 | [2] | BEARING | |
| M | METRIC PART | |||
#SEBP22020542
9R-8605: CONTROL GP-HYDRAULIC HAND
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-8328 | [1] | SHAFT AS | |
| 2. | 8Y-7336 | [1] | BRACKET | |
| 3. | 9R-4826 | [2] | PLATE AS | |
| 4. | 9R-4661 | [2] | ROD | |
| 5. | 9R-8046 | [1] | PLATE-INSTRUCTION | |
| 6. | 8T-4815 | [2] | ROD END | |
| 7. | 9R-2806 | [2] | PIN | |
| 8. | 9R-2807 | [4] | CLIP (RETAINER) | |
| 9. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 10. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 12. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 13. | 9R-1948 | [5] | RIVET | |
| 14. | 9R-8332 | [2] | LEVER AS | |
| (EACH INCLUDES) | ||||
| 15. | 9R-2614 | [2] | BEARING | |
| 16. | 9R-2751 | [4] | WASHER (22.5X40X3-IN THK) | |
| M | METRIC PART | |||
#SEBP22020543
9R-8713: CONTROL GP-HYDRAULIC HAND
9R-8713 CONTROL GP-HYDRAULIC HAND
S/N 8ZK1-5999
PART OF 123-7739, 9R-7657 HYDRAULIC AR
AN ATTACHMENT
S/N 8ZK1-5999
PART OF 123-7739, 9R-7657 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4815 | [2] | ROD END | |
| 2. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 3. | 9R-2751 | [4] | WASHER (22.5X40X3-IN THK) | |
| 4. | 9R-8809 | [1] | ROD-CONTROL | |
| 5. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 6. | 8T-9000 | [1] | KNOB | |
| 7. | 9R-2806 | [2] | PIN | |
| 8. | 9R-8831 | [1] | LEVER AS | |
| 9. | 9R-2614 | [1] | BEARING | |
| 101-2788 F | [1] | FILM-INSTRUCTION (EXTENDABLE STICK) | ||
| 10. | 126-0877 B | [1] | SHIM | |
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP22020544
9R-7661: CONTROL GP-HYDRAULIC LOCKOUT
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-8543 | [1] | PLATE | |
| 2. | 9R-8470 | [1] | ROD AS | |
| 3. | 9R-8477 | [1] | DOOR AS | |
| 4. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 9R-8473 | [1] | TUBE | |
| 6. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 7. | 9R-8474 | [1] | BRACKET AS | |
| 8. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 9. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 8C-8888 | [1] | KNOB-BALL | |
| 11. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| M | METRIC PART | |||
#SEBP22020545
9R-7652: CONTROL GP-HYDRAULIC PEDAL
9R-7652 CONTROL GP-HYDRAULIC PEDAL
S/N 8ZK1-5999
PART OF 9R-7656 HYDRAULIC AR
AN ATTACHMENT
S/N 8ZK1-5999
PART OF 9R-7656 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-4695 C | [1] | PEDAL AS | |
| 2. | 6V-8335 CM | [1] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 3. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 4. | 8T-4121 C | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 6. | 9R-8830 | [1] | SEAL | |
| 7. | 9R-3584 | [1] | ROD | |
| 8. | 8T-4815 | [2] | ROD END | |
| 9. | 9R-2806 | [2] | PIN | |
| 10. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 11. | 9R-8172 | [1] | SHAFT AS | |
| 12. | 9R-8169 | [1] | SUPPORT AS | |
| 13. | 9R-2614 | [2] | BEARING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP22020546
9R-7653: CONTROL GP-HYDRAULIC PEDAL
9R-7653 CONTROL GP-HYDRAULIC PEDAL
S/N 8ZK1-5999
PART OF 9R-7659 HYDRAULIC AR
AN ATTACHMENT
S/N 8ZK1-5999
PART OF 9R-7659 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-4696 | [1] | PEDAL AS | |
| 2. | 9R-8830 | [1] | SEAL | |
| 3. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 4. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 6. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 7. | 9R-8723 | [1] | ROD-CONTROL | |
| 8. | 8T-4815 | [2] | ROD END | |
| 9. | 9R-2806 | [2] | PIN | |
| 10. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 11. | 9R-8179 | [1] | SHAFT AS | |
| 12. | 6V-8335 CM | [1] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 13. | 9R-8177 | [1] | SUPPORT AS | |
| 14. | 9R-2614 | [2] | BEARING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP22020547
9R-8681: CONTROL GP-HYDRAULIC PEDAL
9R-8681 CONTROL GP-HYDRAULIC PEDAL
S/N 8ZK1-5999
MOUNTING & PEDAL
PART OF 118-2867, 118-2868, 9R-8719 HYDRAULIC AR, 106-0396, 106-0842 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
S/N 8ZK1-5999
MOUNTING & PEDAL
PART OF 118-2867, 118-2868, 9R-8719 HYDRAULIC AR, 106-0396, 106-0842 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-4695 C | [1] | PEDAL AS | |
| 2. | 9R-8830 | [1] | SEAL | |
| 3. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 4. | 8T-4121 C | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 6. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 7. | 9R-3051 | [1] | ROD | |
| 8. | 8T-4815 | [2] | ROD END | |
| 9. | 9R-2806 | [2] | PIN | |
| 10. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 11. | 9R-8741 | [1] | SHAFT AS | |
| 12. | 6V-8335 CM | [1] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 13. | 9R-8738 | [1] | SUPPORT AS | |
| 14. | 9R-2614 | [2] | BEARING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP22020548
9R-0031: CONTROL GP-STEERING & XMSN
9R-0031 CONTROL GP-STEERING & XMSN
S/N 8ZK1-5999
PART OF 9R-7575 POWER TRAIN AR
S/N 8ZK1-5999
PART OF 9R-7575 POWER TRAIN AR
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-3984 C | [1] | KNOB | |
| 2. | 9R-4771 C | [1] | STEERING COLUMN AS | |
| 3. | 8T-4225 | [1] | WASHER (39X57X2-MM THK) | |
| 4. | 9R-1606 | [2] | BEARING | |
| 5. | 1V-9385 | [1] | COVER-EMBLEM | |
| 6. | 9K-5635 C | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 7. | 032-1557 | [1] | STEERING WHEEL | |
| 8. | 8T-4134 M | [2] | NUT (M6X1-THD) | |
| 9. | 8T-4765 | [2] | ROD END | |
| 10. | 9R-2637 | [1] | ROD | |
| 11. | 9R-1605 | [1] | CUP | |
| 12. | 9R-1931 | [1] | BOOT AS-COLUMN | |
| 13. | 8T-3991 M | [3] | SCREW-BUTTON HEAD (M6X1X20-MM) | |
| 14. | 9R-1065 | [1] | PLATE AS | |
| 15. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 9R-0820 | [1] | STEERING COLUMN | |
| 18. | 9R-0882 | [1] | BRACKET | |
| 19. | 8T-4957 M | [3] | BOLT-SOCKET HEAD (M10X1.5X30-MM) | |
| 20. | 9R-6219 C | [1] | LOCK | |
| 21. | 8T-7839 C | [1] | WASHER (SPECIAL) | |
| 22. | 8T-0441 CM | [1] | BOLT (M10X1.5X45-MM) | |
| 23. | 8T-4200 CM | [2] | BOLT (M8X1.25X16-MM) | |
| 24. | 6V-7743 M | [2] | LOCKNUT (M6X1-THD) | |
| 25. | 7F-7781 | [1] | WASHER-FELT (38.1X50.8X4.8-MM THK) | |
| 8T-4225 CBF | [3] | WASHER (39X57X2-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP22020549
9R-0979: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 416B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-1764 | [1] | KNOB AS | |
| 2. | 9R-1766 | [1] | COVER-BOTTOM | |
| 3. | 9R-1767 | [1] | BOOT | |
| 4. | 3S-2093 C | [1] | STRAP-CABLE | |
| 5. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 6. | 9R-9868 C | [1] | SWITCH GP-PUSH BUTTON | |
| 7. | 9R-9867 C | [1] | WIRE AS | |
| 8. | 9W-0625 C | [1] | SWITCH AS-PUSH BUTTON | |
| 9. | 9R-1582 | [1] | BOOT | |
| 10. | 9R-0967 | [1] | ROD AS | |
| 11. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 12. | 8T-4184 M | [1] | BOLT (M12X1.75X45-MM) | |
| 13. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 3E-3364 C | [1] | RECEPTACLE (2-PIN) | |
| 15. | 3E-3365 C | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 16. | 9R-1765 | [1] | COVER-TOP | |
| 17. | 9R-2644 | [1] | BUSHING-TERMINAL (RUBBER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
