AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

207-1562 STARTING MOTOR GP-ELECTRIC S/N 70Z1073-UP 24-VOLT PART OF 7C-0526, 7C-0527 STARTING MOTOR GP-ELECTRIC AN ATTACHMENT 3508


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

GEN SET ENGINE 3508 GEN SET ENGINE 70Z
 3508 Generator Set Engine 70Z00757-UP SEBP2207 3508 70Z   (1982)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1562 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
 

#SEBP22071050
 

207-1562: STARTING MOTOR GP-ELECTRIC

207-1562 STARTING MOTOR GP-ELECTRIC
S/N 70Z1073-UP
24-VOLT
PART OF 7C-0526, 7C-0527 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i01592636 SEBP2207
2071562 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)(INSULATED)  
    (INCLUDES BOLT, NUT AS, NUT, & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, NUT, GASKET & RETAINER)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES, & SEAL)
32. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW ASSEMBLIES, WASHERS, SPACER & NUT)
 

#SEBP22071051
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 1
i01972316 SEBP2207
2371962 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 125-6537 [1] INSULATOR  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 318-2082 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
65. 125-6536 [1] TERMINAL AS  
 

#SEBP22071052
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 2
i06992648 SEBP2207
2371962 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 338-3453 C [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22071053
 

352-9766: STARTING MOTOR GP-ELECTRIC

352-9766 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 8N-3896 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i04040907 SEBP2207
3529766 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG (FELT)  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 528-6787 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 351-8955 [1] SEAL-O-RING  
58. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22071054
 

363-9837: STARTING MOTOR GP-ELECTRIC

363-9837 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 8N-3898, 8N-7253 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i05060181 SEBP2207
3639837 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 7T-3974 [1] HOUSING AS-DRIVE  
25. 3T-5343 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22071055
 

3T-2646: STARTING MOTOR GP-ELECTRIC

3T-2646 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 7C-0526, 7C-0527 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6N-1889@@@@@
AN ATTACHMENT
i00368161 SEBP2207
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3T-4704 Y [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  7T-0797 Y [1] STARTING MOTOR GP-ELECTRIC  
    -OR-
  8C-3645 Y [1] STARTING MOTOR GP-ELECTRIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22071056
 

3T-8943: STARTING MOTOR GP-ELECTRIC

3T-8943 STARTING MOTOR GP-ELECTRIC
32-VOLT
PART OF 8N-2945, 8N-3897 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 3T-8948@@@@@, @@@@@ 6V-0501@@@@@, @@@@@107-0997@@@@@
AN ATTACHMENT
i00369890 SEBP2207
3T8943 STARTING MOTOR GP-ELECTRIC Parts scheme 3T8943 STARTING MOTOR GP-ELECTRIC Parts scheme 3T8943 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 036-9823 [6] BOLT (1/4-28X1-IN)  
2. 7F-3488 [6] SHOE-POLE  
3. 3T-3418 [1] FRAME AS-END  
4. 3T-3423 [1] CUP  
5. 9G-4367 [1] BUSHING-TERMINAL  
6. 3T-3424 [1] PLUG-FELT  
7. 6V-8188 [2] NUT (1/2-13-THD)  
8. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
9. 7M-8651 [1] ARMATURE AS  
10. 3L-3380 [1] BUSHING-TERMINAL  
11. 7M-0324 [1] COIL AS-FIELD  
12. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
13. 7X-0562 [1] WASHER-HARD (13.5X19X0.8-MM THK)  
14. 7M-0326 [1] CONNECTOR  
15. 4B-2049 [1] NUT (10-32-THD)  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
  8F-1434 [1] LOCKWASHER  
16. 3T-5051 Y [1] SOLENOID AS-STARTING MOTOR  
17. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
18. 1H-2629 [3] STRIP-INSULATION  
19. 3F-0379 [12] SCREW-POLE SHOE (3/8-24-THD)  
20. 7M-0325 [1] INSULATOR  
21. 4M-1831 [3] PLUG-LEVER HOUSING  
22. 7L-2894 [3] GASKET  
23. 3T-3422 [1] WIRE AS  
  5P-5621 D WIRE (12-GA)  
24. 2L-8071 [1] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
25. 2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
26. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
27. 2J-8163 [1] SEAL-O-RING  
28. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
29. 6T-0371 [1] INSULATOR  
30. 6T-0372 [1] PLATE  
31. 3T-4709 [3] PLATE  
32. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
33. 2L-6679 [3] PLATE-INSULATOR  
34. 3T-4710 [3] PLATE  
35. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
36. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
37. 3T-9494 [1] SPRING  
38. 9S-2544 [6] SCREW-HEX HEAD (8-32X11.13-MM)  
39. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
40. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 6N-3279 [1] INSULATOR  
43. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
44. 7X-0562 [1] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 9M-7606 [1] PLUNGER AS  
46. 036-9821 [1] WASHER  
47. 4M-1829 [1] BOOT-RUBBER  
48. 4M-1828 [1] RETAINER-SPRING  
49. 9M-7609 [1] SPRING (SHIFT LEVER)  
50. 4M-1827 [1] RETAINER-SPRING  
51. 1H-1023 [1] SEAL-O-RING  
52. 3T-3420 [1] HOUSING AS-LEVER  
53. 3T-3434 [1] PLUG  
54. 3T-3423 [1] CUP  
55. 1M-9968 [1] BUSHING  
56. 2F-6678 [1] SEAL-LIP TYPE  
57. 3T-3433 [1] PLUG  
58. 4M-1851 [1] GASKET  
59. 2H-3429 [2] RING-RETAINING  
60. 2J-8163 [1] SEAL-O-RING  
61. 4M-1853 [1] LEVER AS-SHIFT  
62. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
63. 7L-2894 [1] GASKET  
64. 4M-1831 [1] PLUG-LEVER HOUSING  
65. 3T-3419 [1] HOUSING AS-DRIVE  
66. 4M-1896 [1] BUSHING-TERMINAL  
67. 3T-3424 [1] PLUG-FELT  
68. 3T-3423 [1] CUP  
69. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
  7X-3373 [1] BOLT (5/16-18X0.88-IN)  
70. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
71. 6N-3826 [1] DRIVE AS-MOTOR  
72. 4M-1854 [1] SHAFT-LEVER  
73. 2D-6392 [1] SEAL-O-RING  
74. 036-9823 [7] BOLT (1/4-28X1-IN)  
75. 3R-8801 [1] CLAMP  
76. 3T-3434 [6] PLUG  
   
    AVAILABLE REPAIR KIT(S):
  3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP22071057
 

3T-8948: STARTING MOTOR GP-ELECTRIC

3T-8948 STARTING MOTOR GP-ELECTRIC
32 VOLT
FIELD REPLACEMENT ORDER @@@@@ 6V-0501@@@@@
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
i00369922 SEBP2207
3T8948 STARTING MOTOR GP-ELECTRIC Parts scheme 3T8948 STARTING MOTOR GP-ELECTRIC Parts scheme 3T8948 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 036-9823 [6] BOLT (1/4-28X1-IN)  
2. 7F-3488 [6] SHOE-POLE  
3. 3T-3418 [1] FRAME AS-END  
4. 3T-3423 [1] CUP  
5. 9G-4367 [1] BUSHING-TERMINAL  
6. 3T-3424 [1] PLUG-FELT  
7. 3H-3680 [1] NUT-JAM (1/2-13-THD)  
8. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
9. 7M-8651 [1] ARMATURE AS  
10. 3L-3380 [1] BUSHING-TERMINAL  
11. 7M-0324 [1] COIL AS-FIELD  
12. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
13. 7F-3494 [1] WASHER (13.1X22.4X.8-MM THK)  
14. 7M-0326 [1] CONNECTOR  
15. 3H-3681 [1] NUT-FULL (1/2-13-THD)  
16. 3T-5051 Y [1] SOLENOID AS-STARTING MOTOR  
17. 6H-3622 [4] SCREW-MACHINE (1/4-20X0.5-IN)  
18. 9B-0453 C [1] LOCKWASHER  
19. 3F-0379 [12] SCREW-POLE SHOE (3/8-24-THD)  
20. 7M-0325 [1] INSULATOR  
21. 4M-1831 [3] PLUG-LEVER HOUSING  
22. 7L-2894 [3] GASKET  
23. 1H-2629 [3] STRIP-INSULATION  
24. 6V-8378 C [1] NUT (10-32-THD)  
  4B-4274 C [1] WASHER (5.5X13X1.2-MM THK)  
  8F-1434 C [1] LOCKWASHER  
25. 3T-3422 [1] WIRE AS  
  5P-5621 G WIRE (12-GA)(9.06IN)  
26. 2L-8071 [1] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
27. 2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
28. 3T-3106 [3] SCREW AS (8-32X12.3-MM)  
29. 2J-8163 [1] SEAL-O-RING  
30. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
31. 6T-0371 [1] INSULATOR  
32. 6T-0372 [1] PLATE  
33. 3T-4709 [3] PLATE  
34. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
35. 2L-6679 [3] PLATE-INSULATOR  
36. 3T-4710 [3] PLATE  
37. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
38. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
39. 3T-9494 [1] SPRING  
40. 2F-2860 [6] SCREW-MACHINE (8-32X7.94-MM)  
41. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
42. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
43. 3H-3680 [1] NUT-JAM (1/2-13-THD)  
44. 6N-3279 [1] INSULATOR  
45. 3H-3681 [1] NUT-FULL (1/2-13-THD)  
46. 7F-3494 [1] WASHER (13.1X22.4X.8-MM THK)  
47. 9B-0453 C [1] LOCKWASHER  
48. 9M-7606 [1] PLUNGER AS  
49. 036-9821 [1] WASHER  
50. 4M-1829 [1] BOOT-RUBBER  
51. 4M-1828 [1] RETAINER-SPRING  
52. 9M-7609 [1] SPRING (SHIFT LEVER)  
53. 4M-1827 [1] RETAINER-SPRING  
54. 1H-1023 [1] SEAL-O-RING  
55. 3T-3420 [1] HOUSING AS-LEVER  
56. 3T-3424 [1] PLUG-FELT  
57. 3T-3423 [1] CUP  
58. 1M-9968 [1] BUSHING  
59. 2F-6678 [1] SEAL-LIP TYPE  
60. 3T-3433 [1] PLUG  
61. 4M-1851 [1] GASKET  
62. 9M-7611 [2] RING-RETAINING  
63. 2J-8163 [1] SEAL-O-RING  
64. 4M-1853 [1] LEVER AS-SHIFT  
65. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
66. 7L-2894 [1] GASKET  
67. 4M-1831 [1] PLUG-LEVER HOUSING  
68. 3T-3419 [1] HOUSING AS-DRIVE  
69. 4M-1896 [1] BUSHING-TERMINAL  
70. 3T-3424 [1] PLUG-FELT  
71. 3T-3423 [1] CUP  
72. 4M-1833 [5] SCREW (5/16-18X1.5-IN)  
  7M-0336 [1] SCREW (5/16-18X0.859-IN)  
73. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
74. 6N-3826 [1] DRIVE AS-MOTOR  
75. 4M-1854 [1] SHAFT-LEVER  
76. 2D-6392 [1] SEAL-O-RING  
77. 036-9823 [7] BOLT (1/4-28X1-IN)  
78. 3T-3434 [6] PLUG  
79. 3R-8801 [1] CLAMP  
   
    AVAILABLE REPAIR KIT(S):
  3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP22071058
 

3T-8954: STARTING MOTOR GP-ELECTRIC

3T-8954 STARTING MOTOR GP-ELECTRIC
24 VOLT
PART OF 8N-3898, 8N-7253 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i00369953 SEBP2207
3T8954 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 036-9823 [13] BOLT (1/4-28X1-IN)  
2. 3L-3380 [1] BUSHING-TERMINAL  
3. 3T-5440 [1] FRAME AS-END  
4. 3T-3423 [1] CUP  
5. 9G-4101 [1] BUSHING-END  
6. 3T-3424 [1] PLUG-FELT  
7. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
8. 7M-8651 [1] ARMATURE AS  
9. 5L-6425 [1] COIL AS-FIELD  
10. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
11. 7F-3494 [2] WASHER (13.1X22.4X.8-MM THK)  
12. 3H-3680 [2] NUT-JAM (1/2-13-THD)  
13. 7M-0326 [1] CONNECTOR  
14. 9F-4976 [2] LOCKWASHER  
15. 7T-8854 CY [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
16. 6H-3622 [4] SCREW-MACHINE (1/4-20X0.5-IN)  
17. 4M-1831 [4] PLUG-LEVER HOUSING  
18. 7L-2894 [4] GASKET  
19. 3F-0379 [12] SCREW-POLE SHOE (3/8-24-THD)  
20. 7M-0325 [1] INSULATOR  
21. 7F-3488 [6] SHOE-POLE  
22. 3T-3106 [3] SCREW AS (8-32X12.3-MM)  
23. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
24. 2F-2860 C [6] SCREW-MACHINE (8-32X7.94-MM)  
25. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
26. 6T-0371 [1] INSULATOR  
27. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
28. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
29. 6T-0372 [1] PLATE  
30. 3T-4709 [3] PLATE  
31. 2L-6679 [3] PLATE-INSULATOR  
32. 3T-4710 [3] PLATE  
33. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
34. 3T-9494 [1] SPRING  
35. 2D-6392 [1] SEAL-O-RING  
36. 2J-8163 [2] SEAL-O-RING  
37. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
38. 3R-8801 C [1] CLAMP  
39. 6N-3826 [1] DRIVE AS-MOTOR  
40. 1H-2629 [1] STRIP-INSULATION  
41. 3T-3422 [1] WIRE AS  
42. 9M-7606 [1] PLUNGER AS  
43. 036-9821 [1] WASHER  
44. 4M-1829 [1] BOOT-RUBBER  
45. 4M-1828 [1] RETAINER-SPRING  
46. 9M-7609 [1] SPRING (SHIFT LEVER)  
47. 1H-1023 [1] SEAL-O-RING  
48. 3T-3420 [1] HOUSING AS-LEVER  
49. 3T-3424 [1] PLUG-FELT  
50. 3T-3423 [1] CUP  
51. 1M-9968 [1] BUSHING  
52. 2F-6678 [1] SEAL-LIP TYPE  
53. 3T-3433 [1] PLUG  
54. JZ [1] WASHER  
55. 9M-7611 [2] RING-RETAINING  
56. 4M-1853 [1] LEVER AS-SHIFT  
57. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
58. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
59. 4M-1827 [1] RETAINER-SPRING  
60. 4M-1851 [1] GASKET  
61. 3T-4700 [1] HOUSING AS-DRIVE  
62. 4M-1896 [1] BUSHING-TERMINAL  
63. 3T-3424 [1] PLUG-FELT  
64. 3T-3423 [1] CUP  
65. 4M-1833 [4] SCREW (5/16-18X1.5-IN)  
  7M-0336 [2] SCREW (5/16-18X0.859-IN)  
66. JZ [1] BUSHING  
67. JZ [1] BUSHING  
68. 3N-3763 J [1] KIT-TERMINAL (STARTING MOTOR)  
69. 4M-1854 [1] SHAFT-LEVER  
70. 3H-3681 [2] NUT-FULL (1/2-13-THD)  
71. 6N-3279 [1] INSULATOR  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP22071059
 

3T-8967: STARTING MOTOR GP-ELECTRIC

3T-8967 STARTING MOTOR GP-ELECTRIC
24-VOLT
FIELD REPLACEMENT FOR @@@@@ 6T-0647@@@@@
i00068405 SEBP2207
3T8967 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 036-9823 [13] BOLT (1/4-28X1-IN)  
2. 3L-3380 [1] BUSHING-TERMINAL  
3. 3T-3418 [1] FRAME AS-END  
4. 3T-3423 [1] CUP  
5. 9G-4101 [1] BUSHING-END  
6. 3T-3424 [1] PLUG-FELT  
7. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
8. 7M-8651 [1] ARMATURE AS  
9. 7M-0324 [1] COIL AS-FIELD  
10. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
11. 7F-3494 [2] WASHER (13.1X22.4X.8-MM THK)  
12. 3H-3681 [2] NUT-FULL (1/2-13-THD)  
13. 7M-0326 [1] CONNECTOR  
14. 9B-0453 [2] LOCKWASHER  
15. 7T-8854 Y [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
16. 6H-3622 [4] SCREW-MACHINE (1/4-20X0.5-IN)  
17. 4M-1831 [4] PLUG-LEVER HOUSING  
18. 7L-2894 [4] GASKET  
19. 3F-0379 [12] SCREW-POLE SHOE (3/8-24-THD)  
20. 7M-0325 [1] INSULATOR  
21. 7F-3488 [6] SHOE-POLE  
22. 3T-3106 [3] SCREW AS (8-32X12.3-MM)  
23. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
24. 2F-2860 [6] SCREW-MACHINE (8-32X7.94-MM)  
25. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
26. 6T-0371 [1] INSULATOR  
27. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
28. 6T-0372 [1] PLATE  
29. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
30. 3T-9494 [1] SPRING  
31. 2L-6679 [3] PLATE-INSULATOR  
32. 3T-4710 [3] PLATE  
33. 3T-4709 [3] PLATE  
34. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
35. 2D-6392 [1] SEAL-O-RING  
36. 2J-8163 [2] SEAL-O-RING  
37. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
38. 3H-3680 [2] NUT-JAM (1/2-13-THD)  
39. 6N-3279 [1] INSULATOR  
40. 1H-2629 [3] STRIP-INSULATION  
41. 3T-3422 [1] WIRE AS  
42. 9M-7606 [1] PLUNGER AS  
43. 036-9821 [1] WASHER  
44. 4M-1829 [1] BOOT-RUBBER  
45. 4M-1828 [1] RETAINER-SPRING  
46. 9M-7609 [1] SPRING (SHIFT LEVER)  
47. 1H-1023 [1] SEAL-O-RING  
48. 3T-3420 [1] HOUSING AS-LEVER  
49. 3T-3424 [1] PLUG-FELT  
50. 3T-3423 [1] CUP  
51. 1M-9968 [1] BUSHING  
52. 2F-6678 [1] SEAL-LIP TYPE  
53. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
54. 3T-3434 [6] PLUG  
55. 9M-7611 [2] RING-RETAINING  
56. 4M-1853 [1] LEVER AS-SHIFT  
57. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
58. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
59. 4M-1827 [1] RETAINER-SPRING  
60. 4M-1851 [1] GASKET  
61. 3T-3419 [1] HOUSING AS-DRIVE  
62. 4M-1896 [1] BUSHING-TERMINAL  
63. 3T-3424 [1] PLUG-FELT  
  3T-3423 [1] CUP  
64. 4M-1833 [5] SCREW (5/16-18X1.5-IN)  
  7M-0336 [1] SCREW (5/16-18X0.859-IN)  
65. 6N-3826 [1] DRIVE AS-MOTOR  
66. 3R-8801 [1] CLAMP  
67. 4M-1854 [1] SHAFT-LEVER  
68. 6V-8378 [1] NUT (10-32-THD)  
  8F-1434 [1] LOCKWASHER  
  4B-4274 [1] WASHER (5.5X13X1.2-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHER)
  Y   SEPARATE ILLUSTRATION
 

Information:

General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26
New Air Start And Override Valve Has Stronger Mounting
1984/06/20
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay)
1989/08/01
Air Starter Relay Valve Improved
1991/07/01
New Starting Motors Used {1453}
2002/05/01
A New Starter Drive is Used on Air Starting Motors {1451}
2006/01/02
Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Bowl - Clean
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Oil Level - Check
3500 Industrial and Generator Set Engines
Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Cold Weather Starting
3500 Industrial and Generator Set Engines
Starting the Engine
3500 Industrial and Generator Set Engines
Air Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
3500 Generator Set Engines
Electric Starting Motor
3500 Generator Set Engines
Air Starting Motor
3500 Generator Set Engines
Air Starting Motor Pressure Regulating Valve
3500 Generator Set Engines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor
3500 Generator Set Engines
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
3500 Engines
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
Testing and Adjusting
Engaged Starting Motor - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Electric Starting System
3500 Engines
Pinion Clearance Adjustment
3500 Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Pressure Regulating Valve
3500 Engines
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Air Starting Motor (An Attachment)
3500 GENERATOR SET ENGINES
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17
New Air Start And Override Valve Has Stronger Mounting{1451}
1984/06/11
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Air Starter Relay Valve Improved{1462}
1991/06/24

Caterpillar Parts SIS Catalog 3508 :

STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
106-8551 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-AIR
8N-8477 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
8N-8476 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3371 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5108 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
363-9837 STARTING MOTOR GP-ELECTRIC
3T-2646 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
3T-8943 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
3T-8954 STARTING MOTOR GP-ELECTRIC

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.