AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

138-6615 GOVERNOR GP-ELECTRONIC -LOAD SHARE AN ATTACHMENT 3508 GEN SET ENGINE


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL INJECTION
LINES GP-FUEL
LINES GP-FUEL INJECTION

GEN SET ENGINE 3508 GEN SET ENGINE 23Z
 3508 Generator Set Engine (High Speed) 23Z03489-UP SEBP2208 3508 23Z   (1981)

FUEL SYSTEM

GOVERNOR GP
8N-0237 GOVERNOR GP-ELECTRIC
138-1973 GOVERNOR GP-ELECTRONIC
138-6615 GOVERNOR GP-ELECTRONIC
PUMP GP-GEROTOR
172-0265 PUMP GP-GEROTOR
PUMP GP-GEROTOR
5N-1925 PUMP GP-GEROTOR
PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
 

#SEBP22080670
 

138-6615: GOVERNOR GP-ELECTRONIC

138-6615 GOVERNOR GP-ELECTRONIC -LOAD SHARE
AN ATTACHMENT
i00511123 SEBP2208
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4W-8790 [1] BLOCK-FUSE  
  131-5454 [1] CONTROL AS-ELECTRONIC GOVERNOR  
  7T-0037 [1] FUSE (0.75-AMPERE)  
  126-3085 [1] HARNESS AS-ENGINE (GOVERNOR)(EMCP II)  
  126-3103 [1] HARNESS AS-PANEL (GOVERNOR)(EMCP II)  
  4W-5972 [1] KNOB  
  127-9068 [1] POTENTIOMETER (100-OHM, 2-WATT)(GOVERNOR)  
  7C-4550 [1] SEAL (ROTATING SHAFT)  
  5L-5840 [1] WASHER (9.25X16.92X1.83-MM THK)  
 

#SEBP22080671
 

4P-9076: INJECTOR GP-FUEL

4P-9076 INJECTOR GP-FUEL
PART OF 9Y-1796 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i00091540 SEBP2208
4P9076 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 194-9584 [2] SEAL-O-RING  
2. 6V-1250 [1] SEAL-O-RING  
 

#SEBP22080672
 

7E-6408: INJECTOR GP-FUEL

7E-6408 INJECTOR GP-FUEL
S/N 23Z4790-7926
PART OF 9Y-0136 PUMP GP-FUEL INJECTION
i00407550 SEBP2208
7E6408 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 194-9584 [2] SEAL-O-RING  
2. 6V-1250 [1] SEAL-O-RING  
 

#SEBP22080673
 

2W-4926: LINES GP-DIVERTER VALVE

2W-4926 LINES GP-DIVERTER VALVE
S/N 23Z3489-8032
Type 1
FOR USAGE REFER TO CHART @@@@@ 7W-7326@@@@@
AN ATTACHMENT
i00359347 SEBP2208
2W4926 LINES GP-DIVERTER VALVE Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4332 I [1] HOSE AS  
  032-1267 [1] CONNECTOR (STRAIGHT)  
2. 5P-7458 [1] CLIP (SLOT)  
  5P-7459 [1] CLIP (TAB)  
3. 032-1268 [2] CONNECTOR (90-DEG)  
4. 9M-0766 [1] BRACKET  
5. 4L-7108 [1] VALVE-PILOT  
6. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
7. 1D-4717 [2] NUT (3/8-16-THD)  
8. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 2W-4331 I [1] HOSE AS  
10. 2W-0636 [1] TUBE AS  
11. 6T-1546 C [1] SWITCH AS-PRESSURE (FUEL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
12. 2P-7215 [1] ELBOW  
13. 001-6498 [1] ELBOW  
14. 7W-0231 C [1] HARNESS AS-SWITCH (FUEL PRESSURE)(FUEL PRESS. SWITCH)  
15. 2R-6806 C [1] ADAPTER  
16. 0L-1351 [5] BOLT (3/8-16X0.875-IN)  
17. 8N-8514 [1] BRACKET  
18. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
19. 8N-8501 [1] TUBE AS  
20. 2W-0633 [1] TUBE AS  
21. 5N-5671 [3] BRACKET  
  5N-5996 [3] CLAMP  
22. 0S-1615 [3] BOLT (1/4-20X0.75-IN)  
  5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 7K-4129 [1] UNION-FLARED  
24. 3J-1907 [4] SEAL-O-RING  
25. 5N-7781 [1] TUBE AS  
26. 6K-9194 C [1] ELBOW-FLARED  
27. 2W-0635 [1] TUBE AS  
28. 0S-1594 [1] BOLT (3/8-16X1-IN)  
29. 8N-8506 [1] BRACKET  
30. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
31. 4W-1775 Y [1] VALVE GP-DIVERTER  
32. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
33. 030-7947 [2] ELBOW  
34. 8S-7115 CBD LOCKWIRE  
35. 8S-8159 C [1] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP22080674
 

2W-4926: LINES GP-DIVERTER VALVE

2W-4926 LINES GP-DIVERTER VALVE
S/N 23Z8033-UP
FOR USAGE REFER TO CHART @@@@@ 7W-7326@@@@@
AN ATTACHMENT
i05926152 SEBP2208
2W4926 LINES GP-DIVERTER VALVE Parts scheme 2W4926 LINES GP-DIVERTER VALVE Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-4129 [1] UNION-FLARED  
2. 8N-8501 [1] TUBE AS  
3. 7E-1121 [1] VALVE (THERMOSTATIC)  
4. 9X-4276 [1] SWITCH AS-PRESSURE (FUEL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
5. 030-7947 [2] ELBOW  
6. 6V-5049 [4] SEAL-O-RING  
7. 2P-7215 [1] ELBOW  
8. 2R-6806 [1] ADAPTER  
9. 7W-0231 [1] HARNESS AS-SWITCH (FUEL PRESSURE)  
  2W-4899 [1] DIODE AS  
  3S-2093 [4] STRAP-CABLE  
  7N-7779 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  8S-4626 [2] SPLICE-WIRE  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  153-7049 [1] TERMINAL-BLADE  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(1-M)  
10. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
11. 8N-8514 [1] BRACKET  
12. 0L-1351 [5] BOLT (3/8-16X0.875-IN)  
13. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
15. 8N-8506 [1] BRACKET  
16. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
17. 0S-1594 [1] BOLT (3/8-16X1-IN)  
18. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
20. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
21. 2W-0633 [1] TUBE AS  
22. 5P-7458 [1] CLIP (SLOT)  
23. 4P-7048 [1] BRACKET  
24. 032-1268 [2] CONNECTOR (90-DEG)  
25. 032-1267 [1] CONNECTOR (STRAIGHT)  
26. 2W-7703 [3] BRACKET  
27. 001-6498 [1] ELBOW  
28. 4F-7957 [3] BOLT (1/4-20X0.875-IN)  
29. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
30. 2W-7704 [3] CLAMP  
31. 5N-7781 [1] TUBE AS  
32. 2W-0635 [1] TUBE AS  
33. 451-6973 CI [1] HOSE AS  
34. 2W-4332 I [1] HOSE AS  
35. 2W-0636 [1] TUBE AS  
36. 5P-7459 [1] CLIP (TAB)  
37. 6K-9194 [1] ELBOW-FLARED  
38. 8S-8158 [1] SEAL-WIRE  
39. 5P-6025 BD LOCKWIRE  
40. 4M-5317 [1] BUSHING-REDUCER  
41. 9G-8010 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
41A. 6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
41B. 9B-7233 [2] LOCKWASHER  
42. 7B-1597 [1] CLIP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22080675
 

3N-6668: LINES GP-FLEXIBLE FUEL

3N-6668 LINES GP-FLEXIBLE FUEL
PART OF 141-7901, 146-9055, 147-5679, 147-5687, 155-1808, 162-2247 TANK GP-FUEL
AN ATTACHMENT
i00366588 SEBP2208
3N6668 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-3331 C [2] CONNECTOR-PIPE  
2. 3N-6667 I [2] HOSE AS  
3. 003-2143 C [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22080676
 

5N-2438: LINES GP-FLEXIBLE FUEL

5N-2438 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT
i00384663 SEBP2208
5N2438 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-6504 I [1] HOSE AS  
2. 8N-1186 I [1] HOSE AS  
3. 5F-5990 B [2] CLIP  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22080677
 

176-5854: LINES GP-FUEL

176-5854 LINES GP-FUEL
PART OF 102-6820 HEATER GP-JACKET WATER
AN ATTACHMENT
i01219314 SEBP2208
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2Y-4062 [1] ADAPTER  
  4M-5317 [1] BUSHING-REDUCER  
  1P-4278 [2] CLAMP-HOSE  
  2V-4868 [1] FITTING (1/8-27 PTF)  
  7H-0728 [1] FITTING  
  9X-2372 G HOSE (48 IN)  
  1L-8444 [1] TEE  
  129-3078 [1] VALVE AS-SHUTOFF (FUEL, SCREED)  
  G   ORDER BY THE INCH
 

#SEBP22080678
 

7C-8146: LINES GP-FUEL INJECTION

7C-8146 LINES GP-FUEL INJECTION
S/N 23Z3489-3687
i00390719 SEBP2208
7C8146 LINES GP-FUEL INJECTION Parts scheme 7C8146 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)(LH)  
2. 030-7949 [2] ELBOW  
3. 2M-9780 [6] SEAL-O-RING  
4. 7N-6806 C [2] SEAL-RECTANGULAR  
5. 7C-8606 [1] MANIFOLD AS-FUEL (LH)  
6. 2B-2694 [4] BOLT (5/16-18X2-IN)  
7. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
8. 9M-4584 [2] CONNECTOR  
9. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
10. 1W-3116 [4] CLAMP  
11. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
12. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 0L-1352 C [1] BOLT (3/8-16X3.25-IN)  
14. 1D-4717 [2] NUT (3/8-16-THD)  
15. 6V-0268 [1] CLIP (SLOT)  
16. 9Y-5594 [1] TUBE AS  
17. 9Y-5593 [1] TUBE AS  
18. 030-7977 [1] ELBOW  
19. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)(RH)  
20. 1D-4541 C [1] BOLT (5/16-18X3-IN)  
21. 8N-8293 [1] TUBE AS  
22. 8N-2755 [4] CLAMP  
23. 0T-0065 C [2] BOLT (3/8-16X3.5-IN)  
24. 7K-3377 C [1] PIPE  
25. 7P-8672 [1] PLATE  
26. 0S-1594 [1] BOLT (3/8-16X1-IN)  
27. 1B-4971 C [2] SPACER (0.406X1X1-IN THK)  
28. 6V-0267 [1] CLIP (TAB)  
29. 7E-3921 [1] VALVE-CHECK  
30. 7C-8605 [1] MANIFOLD AS-FUEL (RH)  
31. 9N-4053 [1] SPRING  
32. 7C-7677 [8] TUBE AS  
33. 7C-7678 [8] TUBE AS  
34. 030-8276 [1] ELBOW-FLARED  
35. 3J-1907 [19] SEAL-O-RING  
36. 6V-4362 [1] CONNECTOR  
37. 9Y-5585 [1] TUBE AS  
38. 7H-7954 [2] BOLT (3/8-16X2.125-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
39. 2B-2694 [4] BOLT (5/16-18X2-IN)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
40. 9M-8406 [2] CLIP (LOOP)  
41. 3H-4656 [1] SPACER (1.5-IN THK)  
42. 3V-0409 [1] SPACER (0.423X0.675X1.25-IN THK)  
43. 003-8581 [1] TEE-UNION  
44. 7W-2122 [16] CONNECTOR-PORT  
45. 7N-6806 C [2] SEAL-RECTANGULAR  
46. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
47. 1W-7535 [1] PLUNGER-VALVE  
48. 2M-9780 [1] SEAL-O-RING  
49. 6V-4363 [1] ELBOW  
50. 9S-4191 [1] PLUG (9/16-18-THD)  
51. 030-7943 C [1] ELBOW  
52. 7E-3678 C [1] TUBE AS  
53. 3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22080679
 

7C-8146: LINES GP-FUEL INJECTION

7C-8146 LINES GP-FUEL INJECTION
S/N 23Z3688-99999
i00390726 SEBP2208
7C8146 LINES GP-FUEL INJECTION Parts scheme 7C8146 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4971 [1] SPACER (0.406X1X1-IN THK)  
2. 1W-7536 C [1] TUBE AS  
3. 6V-4589 [7] SEAL-O-RING  
4. 6V-5049 [19] SEAL-O-RING  
5. 6V-5048 [1] SEAL-O-RING  
6. 238-5080 [1] SEAL-O-RING  
7. 4P-0692 C [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
8. 4P-0693 C [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
9. 4P-0707 C [4] CLAMP AS  
10. 6B-6205 [1] SPACER (0.438X0.875X1.281-IN THK)  
11. 6V-0267 [1] CLIP (TAB)  
12. 6V-4363 [1] ELBOW  
13. 7C-7677 [8] TUBE AS  
14. 7C-7678 [8] TUBE AS  
15. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)  
16. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)  
17. 7E-3678 [1] TUBE AS  
18. 7E-3921 [1] VALVE-CHECK  
19. 7K-3377 C [3] PIPE  
20. 7N-6806 [4] SEAL-RECTANGULAR  
21. 7P-8672 [1] PLATE  
22. 7W-2122 [16] CONNECTOR-PORT  
23. 8N-8293 [1] TUBE AS  
24. 8N-8294 C [1] TUBE AS  
25. 8N-8729 C [1] TUBE AS  
26. 9N-4053 [1] SPRING  
27. 003-8581 [1] TEE-UNION  
28. 030-7977 [1] ELBOW  
29. 114-5477 [1] PLUNGER-VALVE  
30. 156-9751 CY [1] MANIFOLD GP-FUEL (ENGINE, RH)(RH)  
31. 156-9752 CY [1] MANIFOLD GP-FUEL (ENGINE, LH)(LH)  
32. 162-6803 [1] ELBOW (FLARED 37-DEG)  
33. 030-7943 [1] ELBOW  
34. 030-7949 [2] ELBOW  
35. 0L-1352 C [2] BOLT (3/8-16X3.25-IN)  
36. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
37. 0S-1594 [1] BOLT (3/8-16X1-IN)  
38. 0S-1608 C [2] BOLT (3/8-16X3.75-IN)  
39. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
40. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
41. 1D-4541 [1] BOLT (5/16-18X3-IN)  
42. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
43. 5S-0003 [1] NUT (5/16-18-THD)  
44. 6V-0268 [1] CLIP (SLOT)  
45. 6V-4362 [1] CONNECTOR  
46. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
47. 9M-4584 [2] CONNECTOR  
48. 9S-4182 [1] PLUG (7/16-20-THD)  
49. 9S-4191 [1] PLUG (9/16-18-THD)  
50. 9S-8752 C [2] NUT-FULL (3/8-16-THD)  
51. 5S-0003 B [7] NUT (5/16-18-THD)  
52. 9M-1974 B [7] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
Remove Plastic Plug From Fuel Transfer Pump
1983/04/27
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
Quadrants Improved In Governor Control Groups
1984/07/11
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Tighten Bolts To Correct Torque In 3161 Governor
1985/02/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor
1986/06/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New Woodward Actuator Assembly (EG10P) Has Lower Relief Valve Setting
1988/11/01
New "On Engine" Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
New Hydramechanical Shutoff Groups Reduce The Occurrence Of Improper Shutdowns {1289}
2000/07/01
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
3500 Industrial and Generator Set Engines
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of 7E5253 Governor Control Assembly{1265}
Installation of 7E5253 Governor Control Assembly{1265}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Governor Linkage
3500 Generator Set Engines
Service Letter-China
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Systems Operation
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Installation And Operation
2301A SPEED CONTROL
Governor - 3161
3500 Engines
Service Letter-APD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Testing & Adjusting
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Governor Actuator - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Governor Drive - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack{1257}
1982/10/11
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Remove Plastic Plug From Fuel Transfer Pump{1256}
1983/04/25
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Quadrants Improved In Governor Control Groups{1265,1264}
1984/05/21
New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load{1251,1250}
1984/11/26
Low Oil Level In Governor Can Cause Erratic Engine RPM{1287}
1985/01/28
Tighten Bolts To Correct Torque In 3161 Governor{1264}
1985/02/04
Rough Handling Can Move Droop Lever Out Of Position{1264}
1985/08/05
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Optional Load Sharing Electric Governor Changed From 2301 to 2301A Woodward Governor{1250,1289}
1986/05/26
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
New Woodward Actuator Assembly (EG10P) Has Lower Relief Valve Setting{1289}
1988/10/17
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New "On Engine" Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Fuel Injection Pump Bushing Torque Increased {1253}
1991/04/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01{1289}
1991/04/22
Engine Updates Help Prevent Piston Seizures{1214,1252,1265,1274,1355,1383,1393,1456}
1991/05/13
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20

Caterpillar Parts SIS Catalog 3508 :

138-1973 GOVERNOR GP-ELECTRONIC
8N-0237 GOVERNOR GP-ELECTRIC
GOVERNOR GP
7E-8799 GOVERNOR GP
GOVERNOR GP
6I-0663 GOVERNOR GP
1W-5024 GOVERNOR GP
GOVERNOR GP
124-3172 GOVERNOR GP
GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
4W-9314 GOVERNOR AS-ELECTRONIC
INJECTOR GP-FUEL
4P-9076 INJECTOR GP-FUEL
INJECTOR GP-FUEL
7E-6408 INJECTOR GP-FUEL
LINES GP-DIVERTER VALVE
2W-4926 LINES GP-DIVERTER VALVE
LINES GP-DIVERTER VALVE
2W-4926 LINES GP-DIVERTER VALVE
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
176-5854 LINES GP-FUEL
LINES GP-FUEL INJECTION
7C-8146 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.