AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-5104 STARTING MOTOR GP-AIR 24-32 VOLT CONTROL. LH MOUNTED Type 1 CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF AN ATTACHMENT 3508


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

GEN SET ENGINE 3508 GEN SET ENGINE 23Z
 3508 Generator Set Engine (High Speed) 23Z03489-UP SEBP2208 3508 23Z   (1981)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-AIR
7C-4167 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-4167 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-5104 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-5104 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-5104 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-5104 STARTING MOTOR GP-AIR
 

#SEBP22081280
 

7C-5104: STARTING MOTOR GP-AIR

7C-5104 STARTING MOTOR GP-AIR
24-32 VOLT CONTROL. LH MOUNTED
Type 1
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT
i00407964 SEBP2208
7C5104 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5732 Y [1] STARTING MOTOR GP-AIR  
  4H-7869 [1] GASKET  
2. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
3. 5B-7666 [3] ELBOW  
4. 6F-5985 I [1] HOSE AS  
5. 0V-0375 [2] BOLT (1/2-13X3.25-IN)  
6. 8S-9089 [2] BOLT (1/2-13X4.5-IN)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 5F-8807 [2] BOLT (1/2-13X1.25-IN)  
8. 8N-8447 [1] ELBOW  
9. 8N-8488 [1] SILENCER-AIR STARTING  
10. 6K-1972 [2] ELBOW-FLARED  
11. 7C-3898 J [1] LUBRICATOR GP-AIR MOTOR (STARTING)  
12. 6L-5699 [1] NIPPLE-PIPE  
13. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
14. 4N-3411 [1] VALVE GP-RELAY  
15. 3N-4411 I [1] HOSE AS  
16. 3N-4622 I [1] HOSE AS  
17. 030-7961 [1] ELBOW  
18. 3B-6552 [1] ELBOW-PIPE  
19. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
20. 3J-7354 [1] SEAL-O-RING  
21. 030-7946 [1] ELBOW  
22. 3P-6048 I [1] HOSE AS  
23. 6D-3479 [2] CLIP  
24. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
25. 5L-2534 [1] U-BOLT  
26. 7C-2946 [1] BRACKET  
27. 9S-9238 [2] SPACER (13.49X23.88X16.13-MM THK)  
28. 8N-8446 [1] ELBOW  
29. 3B-7273 [1] NIPPLE-PIPE  
30. 4M-5317 [2] BUSHING-REDUCER  
31. 8N-8451 [1] GASKET  
32. 2N-1287 [1] ELBOW-FLARED  
33. 8N-8452 [1] GASKET  
   
    AVAILABLE REPAIR KIT(S):
  7C-4382 J [1] KIT-LUBRICATOR SEAL (AIR STARTING MOTOR)  
    (KIT INCLUDES SEALS)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J AVAILABLE FOR PART MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP22081281
 

7C-5104: STARTING MOTOR GP-AIR

7C-5104 STARTING MOTOR GP-AIR
24-32 VOLT CONTROL. LH MOUNTED
Type 2
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT
i00407965 SEBP2208
7C5104 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5732 Y [1] STARTING MOTOR GP-AIR  
  4H-7869 [1] GASKET  
2. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
3. 5B-7666 [3] ELBOW  
4. 6F-5985 I [1] HOSE AS  
5. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8S-9089 [2] BOLT (1/2-13X4.5-IN)  
7. 5F-8807 [4] BOLT (1/2-13X1.25-IN)  
8. 8N-8452 [1] GASKET  
9. 107-8769 [1] SILENCER-AIR STARTING  
10. 6K-1972 [2] ELBOW-FLARED  
11. 7C-3898 J [1] LUBRICATOR GP-AIR MOTOR (STARTING)  
12. 6L-5699 [1] NIPPLE-PIPE  
13. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
14. 4N-3411 [1] VALVE GP-RELAY  
15. 3N-4411 I [1] HOSE AS  
16. 3N-4622 I [1] HOSE AS  
17. 030-7961 [1] ELBOW  
18. 3B-6552 [1] ELBOW-PIPE  
19. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
20. 3J-7354 [1] SEAL-O-RING  
21. 030-7946 [1] ELBOW  
22. 3P-6048 I [1] HOSE AS  
23. 6D-3479 [2] CLIP  
24. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
25. 5L-2534 [1] U-BOLT  
26. 7C-2946 [1] BRACKET  
27. 9S-9238 [2] SPACER (13.49X23.88X16.13-MM THK)  
28. 8N-8446 [1] ELBOW  
29. 3B-7273 [1] NIPPLE-PIPE  
30. 4M-5317 [2] BUSHING-REDUCER  
31. 8N-8451 [1] GASKET  
32. 2N-1287 [1] ELBOW-FLARED  
   
    AVAILABLE REPAIR KIT(S):
  7C-4382 BJ KIT-LUBRICATOR SEAL (AIR STARTING MOTOR)  
    (KIT INCLUDES SEALS)
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J AVAILABLE FOR PART MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP22081282
 

7C-5104: STARTING MOTOR GP-AIR

7C-5104 STARTING MOTOR GP-AIR
24-32 VOLT CONTROL. LH MOUNTED
Type 3
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT
i00407967 SEBP2208
7C5104 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5732 Y [1] STARTING MOTOR GP-AIR  
  4H-7869 [1] GASKET  
2. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
3. 5B-7666 [3] ELBOW  
4. 6F-5985 I [1] HOSE AS  
5. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8S-9089 [2] BOLT (1/2-13X4.5-IN)  
7. 141-8596 [4] BOLT-SOCKET HEAD (1/2-13X1.25-IN)  
8. 8N-8452 [1] GASKET  
9. 107-8769 [1] SILENCER-AIR STARTING  
10. 6K-1972 [2] ELBOW-FLARED  
11. 119-6284 Y [1] LUBRICATOR GP-AIR MOTOR  
12. 2L-2811 [2] FITTING  
13. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
14. 4N-3411 [1] VALVE GP-RELAY  
15. 3N-4411 I [1] HOSE AS  
16. 3N-4622 I [1] HOSE AS  
17. 9S-9238 [2] SPACER (13.49X23.88X16.13-MM THK)  
18. 3B-6552 [1] ELBOW-PIPE  
19. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
20. 8N-8446 [1] ELBOW  
21. 3B-7273 [1] NIPPLE-PIPE  
22. 4M-5317 [2] BUSHING-REDUCER  
23. 8N-8451 [1] GASKET  
24. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
25. 5L-2534 [1] U-BOLT  
26. 7C-2946 [1] BRACKET  
27. 3B-6492 [1] COUPLING-PIPE (1-1/2-11-1/2 NPT THD)  
28. 3L-8993 [1] FITTING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP22081283
 

7C-5104: STARTING MOTOR GP-AIR

7C-5104 STARTING MOTOR GP-AIR
24-32 VOLT CONTROL. LH MOUNTED
Type 4
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT
i01547326 SEBP2208
7C5104 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-2811 [2] FITTING  
2. 3B-6492 [1] COUPLING-PIPE (1-1/2-11-1/2 NPT THD)  
3. 3N-4411 I [1] HOSE AS  
4. 3N-4622 I [1] HOSE AS  
5. 4H-7869 [1] GASKET  
6. 4M-5317 [2] BUSHING-REDUCER  
7. 4N-3411 J [1] VALVE GP-RELAY  
8. 4W-5732 Y [1] STARTING MOTOR GP-AIR  
9. 5B-7666 [3] ELBOW  
10. 5N-8980 Y [1] VALVE AS-SOLENOID (AIR START)  
11. 6K-1972 [2] ELBOW-FLARED  
13. 7C-2946 [1] BRACKET  
14. 8N-8446 [1] ELBOW  
15. 8N-8451 [1] GASKET  
16. 8N-8452 [1] GASKET  
17. 9S-9238 [2] SPACER (13.49X23.88X16.13-MM THK)  
18. 107-8769 [1] SILENCER-AIR STARTING  
19. 119-6284 Y [1] LUBRICATOR GP-AIR MOTOR  
20. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
21. 141-8596 [4] BOLT-SOCKET HEAD (1/2-13X1.25-IN)  
22. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
23. 3B-6552 [1] ELBOW-PIPE  
24. 3B-7273 [1] NIPPLE-PIPE  
25. 3L-8993 [1] FITTING  
26. 5L-2534 [1] U-BOLT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8S-9089 [2] BOLT (1/2-13X4.5-IN)  
30. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7C-5105 J [1] KIT-VALVE SEAL (AIR STARTING)  
    (KIT INCLUDES SEALS, RETAINER, & BUMPER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP22081284
 

8N-8476: STARTING MOTOR GP-AIR

8N-8476 STARTING MOTOR GP-AIR -RH
STANDARD ENGINE ROTATION
FOR USE WITH SAE "0" FLYWHEEL HOUSING
AN ATTACHMENT
i00415330 SEBP2208
8N8476 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-0510 [1] GASKET  
2. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
3. 8N-8446 [1] ELBOW  
4. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
5. 8N-8451 [1] GASKET  
6. 4W-5108 CY [1] STARTING MOTOR GP-AIR  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22081285
 

8N-8477: STARTING MOTOR GP-AIR

8N-8477 STARTING MOTOR GP-AIR -RH
STANDARD ENGINE ROTATION
FOR USE WITH SAE NO. 00 FLYWHEEL HOUSING
AN ATTACHMENT
i00415332 SEBP2208
8N8477 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5107 Y [1] STARTING MOTOR GP-AIR  
2. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
3. 4H-7869 [1] GASKET  
4. 8N-8451 [1] GASKET  
5. 8N-8446 [1] ELBOW  
6. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22081286
 

106-8551: STARTING MOTOR GP-ELECTRIC

106-8551 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-4246 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT
i00491972 SEBP2208
1068551 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-1434 [2] LOCKWASHER  
2. 6V-8188 [4] NUT (1/2-13-THD)  
3. 8T-8566 [1] TERMINAL AS  
4. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
5. 3T-3422 [1] WIRE AS  
6. 7T-3278 [1] HOLDER AS-BRUSH  
7. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
8. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 7T-3276 [2] ARMATURE AS (24-VOLT)  
10. 4M-1831 [1] PLUG-LEVER HOUSING  
11. 7L-2894 [1] GASKET  
12. 9X-9511 [1] SOLENOID AS (24-VOLT)(STARTING MOTOR)  
13. 036-9821 [1] WASHER  
14. 7T-3269 [1] BOOT  
15. 4M-1828 [1] RETAINER-SPRING  
16. 9M-7609 [1] SPRING (SHIFT LEVER)  
17. 4M-1827 [1] RETAINER-SPRING  
18. 2H-3429 [1] RING-RETAINING  
19. 4B-2049 [3] NUT (10-32-THD)  
20. 6N-3826 [1] DRIVE AS-MOTOR  
21. 9X-4824 [1] COVER-STARTING MOTOR  
22. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
23. 7T-3277 [1] COIL AS-FIELD  
24. 7T-3454 [1] INSULATOR  
25. 8H-1141 [4] SHOE-POLE  
26. 3F-0379 [8] SCREW-POLE SHOE (3/8-24-THD)  
27. 7T-3271 [1] CONNECTOR  
28. 8T-8569 [1] INSULATOR-TERMINAL  
29. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
30. 3E-7775 [1] HOUSING AS  
31. 036-9823 [5] BOLT (1/4-28X1-IN)  
32. 7T-3974 [1] HOUSING AS-DRIVE  
33. 3T-3434 [6] PLUG  
34. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
35. 7T-3270 [1] PLUNGER AS  
36. 7T-3279 [1] HOUSING AS  
   
    AVAILABLE REPAIR KIT(S):
  8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (KIT INCLUDES SPRINGS, BRUSHES, SEAL, SCREW ASSEMBLIES & SCREWS)
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (KIT INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW ASSEMBLIES, WASHERS, SPACER & NUT)
  7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (KIT INCLUDES GASKET, RETAINER, LEVER ASSEMBLIES, NUT & SEALS)
  8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (KIT INCLUDES BUSHING & INSULATORS)
 

#SEBP22081287
 

106-8554: STARTING MOTOR GP-ELECTRIC

106-8554 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
i00090223 SEBP2208
1068554 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-1434 [2] LOCKWASHER  
2. 6V-8188 [4] NUT (1/2-13-THD)  
3. 8T-8566 [1] TERMINAL AS  
4. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
5. 3T-3422 [1] WIRE AS  
6. 7T-3278 [1] HOLDER AS-BRUSH  
7. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
8. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 7T-3276 [1] ARMATURE AS (24-VOLT)  
10. 4M-1831 [1] PLUG-LEVER HOUSING  
11. 7L-2894 [1] GASKET  
12. 250-8279 [1] KIT-SOLENOID (24-VOLT)(STARTING MOTOR)  
    (INCLUDES BOLT, COVER, CONNECTORS, NUTS & SOLENOID AS)
13. 036-9821 [1] WASHER  
14. 306-3997 [1] BOOT  
15. 4M-1828 [1] RETAINER-SPRING  
16. 9M-7609 [1] SPRING (SHIFT LEVER)  
17. 4M-1827 [1] RETAINER-SPRING  
18. 2H-3429 [1] RING-RETAINING  
19. 4B-2049 [3] NUT (10-32-THD)  
20. 6N-3826 [1] DRIVE AS-MOTOR  
21. 9X-4824 [1] COVER-STARTING MOTOR  
22. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
23. 7T-3277 [1] COIL AS-FIELD  
24. 7T-3454 [1] INSULATOR  
25. 8H-1141 [4] SHOE-POLE  
26. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
27. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
28. 8T-8569 [1] INSULATOR-TERMINAL  
29. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
30. 3E-7775 [1] HOUSING AS  
31. 0S-1597 [5] BOLT (1/4-28X1-IN)  
32. 7T-3974 [1] HOUSING AS-DRIVE  
33. 3T-3434 [6] PLUG  
34. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
35. 7T-3270 [1] PLUNGER AS  
36. 7T-3279 [1] HOUSING AS  
   
    AVAILABLE REPAIR KIT(S):
  8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SPRINGS, BRUSH ASSEMBLIES & SCREWS)
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES NUT, SPACER, GASKET, BUSHINGS, WICKS, CUPS, SEALS & SCREW ASSEMBLIES)
  7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES RETAINER, LEVER ASSEMBLIES, NUT & SEALS)
  8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES BUSHING & INSULATORS)
 

#SEBP22081288
 

107-0997: STARTING MOTOR GP-ELECTRIC

107-0997 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
i00493611 SEBP2208
1070997 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 036-9823 [13] BOLT (1/4-28X1-IN)  
2. 3L-3380 [1] BUSHING-TERMINAL  
3. 3T-3418 [1] FRAME AS-END  
4. 3T-3423 [1] CUP  
5. 9G-4101 [1] BUSHING-END  
6. 3T-3424 [1] PLUG-FELT  
7. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
8. 7M-8651 [1] ARMATURE AS  
9. 7M-0324 [1] COIL AS-FIELD  
10. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
11. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
12. 6V-8188 [6] NUT (1/2-13-THD)  
13. 7M-0326 [1] CONNECTOR  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 3E-7769 [1] SOLENOID AS (STARTER)  
16. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
17. 4M-1831 [4] PLUG-LEVER HOUSING  
18. 7L-2894 [4] GASKET  
19. 3F-0379 [12] SCREW-POLE SHOE (3/8-24-THD)  
20. 7M-0325 [1] INSULATOR  
21. 7F-3488 [6] SHOE-POLE  
22. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
23. 3T-9524 [6] BRUSH AS  
24. 9S-2544 [6] SCREW-HEX HEAD (8-32X11.13-MM)  
25. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
26. 6T-0371 [1] INSULATOR  
27. 3T-4711 [12] SCREW AS (10-32X17.5-MM)  
  9F-5599 [12] LOCKWASHER  
28. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
29. 6T-0372 [1] PLATE  
30. 3T-4709 [3] PLATE  
31. 2L-6679 [3] PLATE-INSULATOR  
32. 3T-4710 [3] PLATE  
33. 6T-0363 [6] HOLDER AS-BRUSH  
    (EACH INCLUDES)
34. 3T-9494 [1] SPRING  
35. 2D-6392 [1] SEAL-O-RING  
36. 2J-8163 [2] SEAL-O-RING  
37. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
38. 3R-8801 [1] CLAMP  
39. 6N-3826 [1] DRIVE AS-MOTOR  
40. 1H-2629 [3] STRIP-INSULATION  
41. 6V-4155 [1] TERMINAL AS  
42. 9M-7606 [1] PLUNGER AS  
43. 036-9821 [1] WASHER  
44. 4M-1829 [1] BOOT-RUBBER  
45. 4M-1828 [1] RETAINER-SPRING  
46. 9M-7609 [1] SPRING (SHIFT LEVER)  
47. 1H-1023 [1] SEAL-O-RING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 3T-3424 [2] PLUG-FELT  
50. 3T-3423 [2] CUP  
51. 1M-9968 [1] BUSHING  
52. 2F-6678 [1] SEAL-LIP TYPE  
53. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
54. 4M-1854 [1] SHAFT-LEVER  
55. 2H-3429 [2] RING-RETAINING  
56. 4M-1853 [1] LEVER AS-SHIFT  
57. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
58. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
59. 4M-1827 [1] RETAINER-SPRING  
60. 8C-3089 [1] SEAL-O-RING  
61. 7T-3974 [1] HOUSING AS-DRIVE  
62. 4M-1896 [1] BUSHING-TERMINAL  
63. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
64. 3T-9494 [6] SPRING  
65. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
66. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES PARTS MARKED J)
  JZ [1] INSULATOR  
67. JZ [1] BUSHING  
68. JZ [1] BUSHING  
69. JZ [1] WASHER  
70. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
71. 6N-3279 [1] INSULATOR  
72. 4B-2049 [2] NUT (10-32-THD)  
73. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
74. 8F-1434 [2] LOCKWASHER  
75. 3T-3434 B [6] PLUG  
  B   USE AS REQUIRED
  J   (null)
  Z   NOT SERVICED SEPARATELY
 

#SEBP22081289
 

207-1562: STARTING MOTOR GP-ELECTRIC

207-1562 STARTING MOTOR GP-ELECTRIC
S/N 23Z7889-UP
24-VOLT
PART OF 7C-0526, 7C-0527 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i01592636 SEBP2208
2071562 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 250-8279 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES SOLENOID AS, BOLT, NUT AS, NUT, COVER & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, NUT, GASKET & RETAINER)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES, & SEAL)
32. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW ASSEMBLIES, WASHERS, SPACER & NUT)
 

Information:

General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26
New Air Start And Override Valve Has Stronger Mounting
1984/06/20
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay)
1989/08/01
Air Starter Relay Valve Improved
1991/07/01
New Starting Motors Used {1453}
2002/05/01
Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01
A New Starter Drive is Used on Air Starting Motors {1451}
2006/01/02
Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Bowl - Clean
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Oil Level - Check
3500 Industrial and Generator Set Engines
Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Cold Weather Starting
3500 Industrial and Generator Set Engines
Starting the Engine
3500 Industrial and Generator Set Engines
Air Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
3500 Generator Set Engines
Electric Starting Motor
3500 Generator Set Engines
Air Starting Motor
3500 Generator Set Engines
Air Starting Motor Pressure Regulating Valve
3500 Generator Set Engines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor
3500 Generator Set Engines
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
3500 Engines
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
Testing and Adjusting
Engaged Starting Motor - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Electric Starting System
3500 Engines
Pinion Clearance Adjustment
3500 Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Pressure Regulating Valve
3500 Engines
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Air Starting Motor - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Air Starting Motor - Assemble
3508, 3512 and 3516 Generator Set Engines
Air Regulator - Remove and Install - Air Starting
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17
New Air Start And Override Valve Has Stronger Mounting{1451}
1984/06/11
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

Caterpillar Parts SIS Catalog 3508 :

STARTING MOTOR GP-AIR
7C-4167 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-4167 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-4167 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3371 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-2971 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-2971 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-2971 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-5104 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-5104 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-5104 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
8N-8476 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
8N-8477 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
106-8551 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.