AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6E-0019 CYLINDER GP-STICK S/N 8WJ1-UP; 1JM1-UP 220MM (8.66IN) BORE X 2262MM (89.06IN)STROKE PART OF 7Y-5193 CYLINDER & SEAL GP-STICK FIELD REPLACEMENT ORDER 156-0664 CYLINDER GP-STICK AN ATTACHMENT 375-A L


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 375-A L EXCAVATOR 1JM
 375 & 375 L Excavators 1JM00001-UP (MACHINE) POWERED BY 3406 Engine SEBP2213 375-A L 1JM   (1993)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-COUNTERWEIGHT
6E-3529 CYLINDER GP-COUNTERWEIGHT
CYLINDER GP-STICK
156-0664 CYLINDER GP-STICK
CYLINDER GP-STICK
6E-0019 CYLINDER GP-STICK
 

#SEBP22130440
 

6E-0019: CYLINDER GP-STICK

6E-0019 CYLINDER GP-STICK
S/N 8WJ1-UP; 1JM1-UP
220MM (8.66IN) BORE X 2262MM (89.06IN)STROKE
PART OF 7Y-5193 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT ORDER 156-0664 CYLINDER GP-STICK
AN ATTACHMENT
i00395818 SEBP2213
6E0019 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0488 [1] CYLINDER AS  
  6E-0781 [1] BUSHING  
2. 4I-6329 [1] NUT  
3. 7I-8122 [1] STOP  
4. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
5. 6E-0496 J [1] RING-WEAR  
6. 8C-9182 J [1] SEAL AS  
7. 116-3517 [1] PISTON  
8. 116-3518 [1] STOP  
9. 095-1733 J [1] SEAL-O-RING  
10. 4I-6442 J [1] RING-BACKUP  
11. 128-9262 [1] BUSHING  
12. 103-8361 [1] HEAD  
13. 8T-4167 [12] WASHER-HARD (26X44X4-MM THK)  
14. 7X-2454 M [12] BOLT (M24X3X110-MM)  
15. 142-5151 [1] ROD AS  
  6E-0781 [1] BUSHING  
16. 165-9296 J [1] SEAL-LIP TYPE  
17. 8C-9191 J [1] SEAL-U-CUP  
18. 8C-9193 J [1] SEAL-BUFFER  
19. 8C-9192 J [1] RING-BACKUP  
20. 4I-6443 J [1] RING  
21. 116-3519 J [1] RING-SEAL  
22. 095-1274 M [1] SETSCREW-SOCKET (M6X1X16-MM)  
23. 103-8364 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  156-0627 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22130441
 

102-6430: DRIVE GP-SWING

102-6430 DRIVE GP-SWING
S/N 8WJ60-UP; 1JM1-UP
PART OF 4E-4399 POWER TRAIN AR
i00466570 SEBP2213
1026430 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-7334 Y [1] MOTOR & MTG GP-SWING  
2. 7I-7617 Y [1] DRIVE GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22130442
 

102-6431: DRIVE GP-SWING

102-6431 DRIVE GP-SWING
S/N 8WJ60-UP; 1JM1-UP
PART OF 4E-4399 POWER TRAIN AR
i00466572 SEBP2213
1026431 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-7318 Y [1] MOTOR & MTG GP-SWING  
2. 7I-7618 Y [1] DRIVE GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22130443
 

108-3807: DRIVE GP-SWING

108-3807 DRIVE GP-SWING -FRONT
S/N 8WJ1-UP; 1JM1-UP
FIELD REPLACEMENT ORDER 1- 7I-7617 DRIVE GP-SWING
FIELD INSTALLATION
i00482319 SEBP2213
1083807 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0915 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 7Y-0916 [4] SHAFT-PLANETARY  
4. 7I-7661 [1] COVER-HOUSING  
5. 7Y-1116 [1] SPACER (161.7X178.25X5-MM THK)  
6. 7I-7700 [1] GEAR-SUN (17-TEETH)  
7. 8C-3411 M [1] BOLT (M30X3.5X90-MM)  
8. 7I-7684 M [1] SPACER (50X79.6X6-MM THK)  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 110-7082 [1] GEAR-SUN (17-TEETH)  
12. 7Y-0900 [1] CARRIER  
13. 7Y-5227 M [20] BOLT (M16X2X190-MM)  
14. 9X-8257 [22] WASHER (17.5X30X3.5-MM THK)  
15. 7Y-0903 [1] CARRIER  
16. 7Y-0902 [1] GEAR-RING (67-TEETH)  
17. 7Y-0904 [1] RETAINER  
18. 7Y-1215 [1] COUPLING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 7I-7612 [1] SPACER (140.5X160X43.2-MM THK)  
21. 7I-7619 [1] BEARING-ROLLER  
22. 7I-7611 [1] CAGE  
23. 6V-6899 [2] SEAL-LIP TYPE  
24. 7I-7615 [1] SHAFT-PINION (12-TEETH)  
25. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
26. 5M-4454 [1] SEAL-O-RING  
27. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7I-7610 [1] HOUSING  
29. 1B-5174 [3] PLUG-PIPE  
30. 7Y-1094 M [8] WASHER (66X102X1-MM THK)  
31. 7Y-0912 [8] BEARING AS-ROLLER  
32. 7Y-0911 [4] SHAFT-PLANETARY  
33. 7Y-0913 [4] GEAR-PLANETARY (24-TEETH)  
34. 095-0891 [10] PIN-SPRING  
35. 7Y-0339 [4] BEARING AS-ROLLER  
36. 7Y-2171 B [10] SHIM (0.1-MM THK)  
37. 7Y-2172 B [6] SHIM (0.16-MM THK)  
38. 7Y-2173 B [1] SHIM (0.8-MM THK)  
39. 8T-4190 M [2] BOLT (M16X2X25-MM)  
40. 2B-0858 [1] PLUG-PIPE  
41. 108-3813 [1] COVER  
42. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22130444
 

108-3809: DRIVE GP-SWING

108-3809 DRIVE GP-SWING -REAR
S/N 8WJ1-UP; 1JM1-UP
FIELD REPLACEMENT ORDER 1- 7I-7618 DRIVE GP-SWING
FIELD INSTALLATION
i00482321 SEBP2213
1083809 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0915 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 7Y-0916 [4] SHAFT-PLANETARY  
4. 7I-7661 [1] COVER-HOUSING  
5. 7Y-1116 [1] SPACER (161.7X178.25X5-MM THK)  
6. 7I-7700 [1] GEAR-SUN (17-TEETH)  
7. 8C-3411 M [1] BOLT (M30X3.5X90-MM)  
8. 7I-7684 M [1] SPACER (50X79.6X6-MM THK)  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 110-7082 [1] GEAR-SUN (17-TEETH)  
12. 7Y-0900 [1] CARRIER  
13. 7Y-5227 M [20] BOLT (M16X2X190-MM)  
14. 9X-8257 [22] WASHER (17.5X30X3.5-MM THK)  
15. 7Y-0903 [1] CARRIER  
16. 7Y-0902 [1] GEAR-RING (67-TEETH)  
17. 7Y-0904 [1] RETAINER  
18. 7Y-1215 [1] COUPLING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 7I-7612 [1] SPACER (140.5X160X43.2-MM THK)  
21. 7I-7619 [1] BEARING-ROLLER  
22. 7I-7611 [1] CAGE  
23. 6V-6899 [2] SEAL-LIP TYPE  
24. 7I-7615 [1] SHAFT-PINION (12-TEETH)  
25. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
26. 5M-4454 [1] SEAL-O-RING  
27. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7I-7610 [1] HOUSING  
29. 1B-5174 [3] PLUG-PIPE  
30. 7Y-1094 M [8] WASHER (66X102X1-MM THK)  
31. 7Y-0912 [8] BEARING AS-ROLLER  
32. 7Y-0911 [4] SHAFT-PLANETARY  
33. 7Y-0913 [4] GEAR-PLANETARY (24-TEETH)  
34. 095-0891 [10] PIN-SPRING  
35. 7Y-0339 [4] BEARING AS-ROLLER  
36. 7Y-2171 B [10] SHIM (0.1-MM THK)  
37. 7Y-2172 B [6] SHIM (0.16-MM THK)  
38. 7Y-2173 B [1] SHIM (0.8-MM THK)  
39. 8T-4190 M [2] BOLT (M16X2X25-MM)  
40. 2B-0858 [1] PLUG-PIPE  
41. 108-3813 [1] COVER  
42. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22130445
 

7I-7617: DRIVE GP-SWING

7I-7617 DRIVE GP-SWING
S/N 8WJ60-UP; 1JM1-UP
PART OF 102-6430 DRIVE GP-SWING
ALSO FIELD INSTALLATION
i00405043 SEBP2213
7I7617 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0915 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 7Y-0916 [4] SHAFT-PLANETARY  
4. 7I-7661 [1] COVER-HOUSING  
5. 7Y-1116 [1] SPACER (161.7X178.25X5-MM THK)  
6. 7I-7700 [1] GEAR-SUN (17-TEETH)  
7. 8C-3411 M [1] BOLT (M30X3.5X90-MM)  
8. 096-1441 [1] RING-RETAINING  
9. 093-1730 [1] RING-RETAINING  
10. 110-7082 [1] GEAR-SUN (17-TEETH)  
11. 093-2357 [1] GAUGE-OIL LEVEL (DIPSTICK)  
12. 7Y-1115 [1] PIPE-GAUGE  
13. 7Y-0900 [1] CARRIER  
14. 7Y-0903 [1] CARRIER  
15. 1U-8846 B SEALANT-GASKET  
16. 4I-7527 [1] BREATHER AS  
  093-5150 [1] COUPLING-PIPE  
  114-8234 [1] BREATHER (SWING DRIVE)  
  159-7665 [1] NIPPLE-PIPE  
17. 7Y-0902 [1] GEAR-RING (67-TEETH)  
18. 7Y-0904 [1] RETAINER  
19. 7Y-1215 [1] COUPLING  
20. 9U-8693 [1] BEARING-ROLLER  
21. 7I-7612 [1] SPACER (140.5X160X43.2-MM THK)  
22. 7I-7619 [1] BEARING-ROLLER  
23. 7I-7611 [1] CAGE  
24. 6V-6899 [2] SEAL-LIP TYPE  
25. 7I-7615 [1] SHAFT-PINION (12-TEETH)  
26. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
27. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7I-7610 [1] HOUSING  
29. 5M-4454 [1] SEAL-O-RING  
30. 4B-5984 [1] ELBOW  
31. 121-3980 [1] NIPPLE-PIPE  
32. 7I-7684 M [1] SPACER (50X79.6X6-MM THK)  
33. 7Y-1094 M [8] WASHER (66X102X1-MM THK)  
34. 7Y-0912 [8] BEARING AS-ROLLER  
35. 7Y-0911 [4] SHAFT-PLANETARY  
36. 7Y-0913 [4] GEAR-PLANETARY (24-TEETH)  
37. 095-0891 [10] PIN-SPRING  
38. 7Y-0339 [4] BEARING AS-ROLLER  
39. 9X-8257 [20] WASHER (17.5X30X3.5-MM THK)  
40. 7Y-5227 M [20] BOLT (M16X2X190-MM)  
41. 1B-5174 [2] PLUG-PIPE  
42. 7Y-2171 B [10] SHIM (0.1-MM THK)  
43. 7Y-2172 B [6] SHIM (0.16-MM THK)  
44. 7Y-2173 B [1] SHIM (0.8-MM THK)  
45. 108-4843 [1] VALVE GP-DRAIN  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22130446
 

7I-7618: DRIVE GP-SWING

7I-7618 DRIVE GP-SWING
S/N 8WJ60-UP; 1JM1-UP
PART OF 102-6431 DRIVE GP-SWING
ALSO FIELD INSTALLATION
i00405049 SEBP2213
7I7618 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0915 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 7Y-0916 [4] SHAFT-PLANETARY  
4. 7I-7661 [1] COVER-HOUSING  
5. 7Y-1116 [1] SPACER (161.7X178.25X5-MM THK)  
6. 7I-7700 [1] GEAR-SUN (17-TEETH)  
7. 8C-3411 M [1] BOLT (M30X3.5X90-MM)  
8. 096-1441 [1] RING-RETAINING  
9. 093-1730 [1] RING-RETAINING  
10. 7I-7685 [1] GEAR-SUN (17 T)  
11. 7Y-1187 [1] GAUGE-OIL LEVEL (DIPSTICK)  
12. 7Y-1188 [1] PIPE-GAUGE  
13. 7Y-0900 [1] CARRIER  
14. 7Y-0903 [1] CARRIER  
15. 1U-8846 B SEALANT-GASKET  
16. 4I-7527 [1] BREATHER AS  
  093-5150 [1] COUPLING-PIPE  
  114-8234 [1] BREATHER (SWING DRIVE)  
  159-7665 [1] NIPPLE-PIPE  
17. 7Y-0902 [1] GEAR-RING (67-TEETH)  
18. 7Y-0904 [1] RETAINER  
19. 7Y-1215 [1] COUPLING  
20. 9U-8693 [1] BEARING-ROLLER  
21. 7I-7612 [1] SPACER (140.5X160X43.2-MM THK)  
22. 7I-7619 [1] BEARING-ROLLER  
23. 7I-7611 [1] CAGE  
24. 6V-6899 [2] SEAL-LIP TYPE  
25. 7I-7615 [1] SHAFT-PINION (12-TEETH)  
26. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
27. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7I-7610 [1] HOUSING  
29. 5M-4454 [1] SEAL-O-RING  
30. 4B-5984 [1] ELBOW  
31. 7I-7614 [1] NIPPLE-PIPE  
32. 7I-7684 M [1] SPACER (50X79.6X6-MM THK)  
33. 7Y-1094 M [8] WASHER (66X102X1-MM THK)  
34. 7Y-0912 [8] BEARING AS-ROLLER  
35. 7Y-0911 [4] SHAFT-PLANETARY  
36. 7Y-0913 [4] GEAR-PLANETARY (24-TEETH)  
37. 095-0891 [10] PIN-SPRING  
38. 7Y-0339 [4] BEARING AS-ROLLER  
39. 9X-8257 [20] WASHER (17.5X30X3.5-MM THK)  
40. 7Y-5227 M [20] BOLT (M16X2X190-MM)  
41. 1B-5174 [2] PLUG-PIPE  
42. 7Y-2171 B [10] SHIM (0.1-MM THK)  
43. 7Y-2172 B [6] SHIM (0.16-MM THK)  
44. 7Y-2173 B [1] SHIM (0.8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22130447
 

7Y-0851: FASTENER GP-SWING & FINAL DR

7Y-0851 FASTENER GP-SWING & FINAL DR
S/N 8WJ1-UP; 1JM1-UP
PART OF 4E-4399 POWER TRAIN AR
i00423250 SEBP2213
7Y0851 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [4] CORK  
2. 9X-8258 [48] WASHER (33X56X6-MM THK)  
3. 7X-2582 M [48] BOLT (M30X3.5X110-MM)  
4. 8T-4167 [40] WASHER-HARD (26X44X4-MM THK)  
5. 7X-2576 M [40] BOLT (M24X3X70-MM)  
6. 7Y-1095 [2] DOWEL  
7. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22130448
 

6E-5534: FILTER GP-OIL

6E-5534 FILTER GP-OIL
S/N 8WJ1-UP; 1JM1-UP
PART OF 106-9599 LINES GP-PILOT, 107-0288, 112-8975, 113-5286 TANK & FILTER GP-HYDRAULIC
i00401660 SEBP2213
6E5534 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6788 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, CASE DRAIN)  
    -OR-
  223-7809 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC, CASE DRAIN)  
 

#SEBP22130449
 

7Y-4075: FILTER GP-OIL

7Y-4075 FILTER GP-OIL
S/N 8WJ1-UP; 1JM1-UP
PART OF 106-9599, 7Y-8009 LINES GP-PILOT
i00089707 SEBP2213
7Y4075 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 375-A L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3950 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)(DISPOSABLE)  
    -OR-
  126-1814 A [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(CLEANOUT/HIGH EFFICIENCY)  
2. 103-8236 [1] RING  
  A   NOT PART OF THIS GROUP
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 375-A L :

CYLINDER GP-STICK
156-0664 CYLINDER GP-STICK
CYLINDER GP-COUNTERWEIGHT
6E-3529 CYLINDER GP-COUNTERWEIGHT
CYLINDER GP-BUCKET
6E-0021 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
6E-0020 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
156-0697 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
156-0694 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
6E-0018 CYLINDER GP-BOOM
CYLINDER GP-BOOM
114-0596 CYLINDER GP-BOOM
DRIVE GP-SWING
102-6430 DRIVE GP-SWING
DRIVE GP-SWING
102-6431 DRIVE GP-SWING
DRIVE GP-SWING
108-3807 DRIVE GP-SWING
DRIVE GP-SWING
108-3809 DRIVE GP-SWING
DRIVE GP-SWING
7I-7617 DRIVE GP-SWING
DRIVE GP-SWING
7I-7618 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
7Y-0851 FASTENER GP-SWING & FINAL DR
FILTER GP-OIL
6E-5534 FILTER GP-OIL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.