BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
DAMPER GP
DRIVE GP-FAN
CYLINDER HEAD GP
HOUSING GP-FRONT
PAN GP-OIL
BASIC ENGINE
CYLINDER BLOCK GP#SEBP22140040
7N-6550: CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
S/N R6J1-UP; 08Z92747-99999; 13Z28100-99999
PART OF 8N-5286 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3576@@@@@, 6N-7727 KIT-CYLINDER BLOCK
S/N R6J1-UP; 08Z92747-99999; 13Z28100-99999
PART OF 8N-5286 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3576@@@@@, 6N-7727 KIT-CYLINDER BLOCK
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5S-6670 | [18] | SEAL-O-RING | |
2. | 371-5941 | [6] | LINER-CYLINDER | |
104-5512 ABJ | INSERT-LINER SEAT (0.822-MM THK) | |||
104-5518 ABJ | INSERT-LINER SEAT (1.605-MM THK) | |||
104-5527 ABJ | INSERT-LINER SEAT (2.71-MM THK) | |||
104-5530 ABJ | INSERT-LINER SEAT (5.21-MM THK) | |||
(REFER TO SEBF8198 FOUND IN SISWEB FOR LINER INSERTS.) | ||||
3. | 2W-6134 | [6] | BAND-FILLER | |
4. | 7S-3224 | [14] | BOLT (5/8-11X5.25-IN) | |
5. | 6N-8003 | [7] | CAP-CRANKSHAFT BEARING | |
6. | 2S-5658 | [14] | WASHER-HARD (17X29X3-MM THK) | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
J | TO REPAIR LIGHT DAMAGE DUE TO EROSION/FRETTING IN THE LINER FLANGE SEATING AREA |
#SEBP22140041
8N-5286: CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
S/N R6J1-UP; 08Z92747-99999; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
S/N R6J1-UP; 08Z92747-99999; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7N-6550 Y | [1] | CYLINDER BLOCK GP | |
2. | 7M-4046 | [4] | BUSHING | |
3. | 8K-1207 | [2] | DOWEL | |
4. | 3S-5496 | [1] | SEAL-O-RING | |
5. | 8B-6349 | [2] | DOWEL | |
6. | 7N-7998 | [1] | PLATE-BLOCK | |
7. | 115-7550 | [1] | GASKET-PLATE | |
8. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
9. | 8T-6763 | [1] | PLUG-PIPE (1/4-18-THD) | |
10. | 8T-6765 | [4] | PLUG-PIPE (1/4-18-THD) | |
11. | 8M-9307 | [1] | PLUG | |
12. | 8T-6762 | [3] | PLUG-PIPE (1/2-14-THD) | |
13. | 5B-7652 | [2] | DOWEL | |
14. | 8N-4110 | [1] | BUSHING | |
15. | 4B-5387 | [1] | PLUG-CUP | |
16. | 4B-9782 | [1] | BALL | |
17. | 1S-9540 | [1] | DOWEL | |
18. | 5S-8462 | [1] | STUD | |
19. | 4B-3938 | [1] | PLUG-CUP | |
20. | 6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | |
Y | SEPARATE ILLUSTRATION |
#SEBP22140042
7W-0362: CYLINDER HEAD GP
7W-0362 CYLINDER HEAD GP
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
FIELD REPLACEMENT FOR @@@@@ 8N-0246@@@@@
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
FIELD REPLACEMENT FOR @@@@@ 8N-0246@@@@@
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7S-7144 | [12] | SPRING-VALVE | |
2. | 1W-5300 | [12] | ROTOCOIL AS | |
(EACH INCLUDES) | ||||
6N-7174 | [1] | SHIELD-OIL | ||
3. | 2A-4429 | [24] | LOCK-RETAINER | |
4. | 8N-6796 Y | [1] | CYLINDER HEAD GP | |
5. | 100-7860 | [6] | VALVE-INLET | |
6. | 148-7455 | [6] | VALVE-EXHAUST | |
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP22140043
8N-0246: CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@ 8N-6796@@@@@, @@@@@ 7W-0362@@@@@
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@ 8N-6796@@@@@, @@@@@ 7W-0362@@@@@
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-6762 B | [1] | PLUG-PIPE (1/2-14-THD) | |
2. | 148-7425 | [12] | GUIDE-VALVE | |
3. | 3J-5389 B | [2] | PLUG (EXTERNAL) | |
4. | 111-8015 | [1] | GASKET AS-CYLINDER HEAD | |
5. | 8T-6763 | [1] | PLUG-PIPE (1/4-18-THD) | |
6. | 1W-5300 | [12] | ROTOCOIL AS | |
7. | 148-7455 | [6] | VALVE-EXHAUST | |
8. | 2A-4429 | [24] | LOCK-RETAINER | |
9. | 7S-7144 | [12] | SPRING-VALVE | |
10. | 100-7860 | [6] | VALVE-INLET | |
11. | 3S-5496 | [1] | SEAL-O-RING | |
12. | 9Y-1798 | [18] | SEAL | |
13. | 7N-8018 | [6] | SEAL | |
14. | 7C-4006 | [1] | CYLINDER HEAD AS | |
15. | 107-0268 | [6] | INSERT-VALVE SEAT (INLET) | |
16. | 107-0265 | [6] | INSERT-VALVE SEAT (EXHAUST) | |
3B-0623 | [6] | PLUG-CUP | ||
3P-1896 | [13] | PLUG-CUP | ||
3S-8313 | [7] | PLUG-CUP | ||
B | USE AS REQUIRED | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP22140044
8N-6796: CYLINDER HEAD GP
8N-6796 CYLINDER HEAD GP
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 7W-0362 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@ 8N-0246@@@@@
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 7W-0362 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@ 8N-0246@@@@@
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 148-7502 | [12] | GUIDE-VALVE | |
2. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
3. | 8T-6762 | [3] | PLUG-PIPE (1/2-14-THD) | |
4. | 5S-6735 | [1] | GASKET | |
5. | 1P-6367 | [1] | COVER | |
6. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
7. | 8T-6763 | [1] | PLUG-PIPE (1/4-18-THD) | |
8. | 8N-4485 | [1] | VALVE AS-VENT | |
9. | 107-0265 | [6] | INSERT-VALVE SEAT (EXHAUST) | |
10. | 107-0268 | [6] | INSERT-VALVE SEAT (INLET) | |
11. | 3B-0623 | [6] | PLUG-CUP | |
12. | 3S-8313 | [7] | PLUG-CUP | |
13. | 3P-1896 | [13] | PLUG-CUP |
#SEBP22140045
1W-7831: DAMPER GP
1W-7831 DAMPER GP
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SIS#SEBP22140046
2W-9267: DRIVE GP-FAN
2W-9267 DRIVE GP-FAN
S/N 9YJ1-99999
PART OF 151-7275, 6C-8499, 6C-8583 ENGINE AR, 6I-2028 INSTALLATION AR-ENGINE
S/N 9YJ1-99999
PART OF 151-7275, 6C-8499, 6C-8583 ENGINE AR, 6I-2028 INSTALLATION AR-ENGINE
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1P-9945 | [1] | BRACKET AS-FAN | |
5B-5812 | [1] | DOWEL | ||
2. | 1P-9946 | [1] | SHAFT-FAN | |
3. | 5S-9062 | [1] | SPACER (35.032X50.8X15.88-MM THK) | |
4. | 8H-9789 | [1] | BALL BEARING | |
5. | 8N-5305 | [1] | SPACER (35.6X47.62X43.74-MM THK) | |
6. | 1W-4407 | [1] | HUB-FAN PULLEY | |
7. | 5S-7264 | [1] | WASHER-RETAINING (0.219-IN THK) | |
8. | 6V-4626 | [2] | BOLT-LOCKING (5/16-24X2-IN) | |
9. | 3L-1425 | [1] | BALL BEARING | |
10. | 5S-2106 | [1] | SEAL-LIP TYPE | |
11. | 8T-8920 | [4] | BOLT (1/2-13X3.25-IN) | |
12. | 9N-6612 | [1] | SPACER | |
13. | 3B-8485 | [1] | ELBOW |
#SEBP22140047
7N-9536: FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
S/N R6J1-UP; 08Z92747-UP; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
#SEBP22140048
8N-0872: FASTENER GP-FRONT HOUSING
8N-0872 FASTENER GP-FRONT HOUSING
S/N R6J1-UP; 08Z92747-99999; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
S/N R6J1-UP; 08Z92747-99999; 13Z28100-99999
PART OF 101-3023, 106-3145, 113-5378, 122-4210, 141-2912, 151-7278, 6I-2965 ENGINE AR
Parts for your 966F II WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-6914 | [6] | BOLT (3/8-16X0.87-IN) | |
2. | 0L-2070 | [11] | BOLT (3/8-16X2.25-IN) | |
3. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
4. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
5. | 1C-2251 B | [2] | BOLT (3/8-16X1.87-IN) | |
6. | 0L-2070 B | [9] | BOLT (3/8-16X2.25-IN) | |
7. | 5M-2894 B | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
8. | 6V-8801 B | [5] | NUT (3/8-16-THD) | |
B | USE AS REQUIRED |
#SEBP22140049
4P-5814: FASTENER GP-OIL PAN
4P-5814 FASTENER GP-OIL PAN
S/N 13Z30500-99999
PART OF 101-3023, 106-3145, 113-5378, 141-2912 ENGINE AR
S/N 13Z30500-99999
PART OF 101-3023, 106-3145, 113-5378, 141-2912 ENGINE AR
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly