AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9U-4793 WIRING GP-FRONT S/N 9YJ1-1077 PART OF 4E-8678 CHASSIS AR 966F II WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEEL LOADER 966F II WHEEL LOADER 9YJ
 966F Series II Wheel Loader 9YJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2214 966F II 9YJ   (1992)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-FRONT
9U-4793 WIRING GP-FRONT
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
 

#SEBP22140340
 

9U-4793: WIRING GP-FRONT

9U-4793 WIRING GP-FRONT
S/N 9YJ1-1077
PART OF 4E-8678 CHASSIS AR
i00189252 SEBP2214
9U4793 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-5859 [1] HORN  
2. 8M-2770 [2] CLIP (LOOP)  
3. 8T-4896 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 [7] NUT (3/8-16-THD)  
5. 9X-3495 [1] CLIP AS  
6. 6T-6962 [2] WIRE AS  
  3T-3048 [2] CLIP AS  
7. 092-9741 [2] GROMMET  
8. 033-8248 [1] CLIP  
9. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4133 M [1] NUT (M10X1.5-THD)  
10. 9M-4972 [2] CLIP (LOOP)  
11. 7I-3520 [1] HARNESS AS-FRONT  
12. 4K-8864 [8] CLIP  
13. 9G-9152 [1] CLIP  
14. 9D-3769 [2] GROMMET  
15. 7I-3521 [1] HARNESS AS  
16. 4V-1939 [4] CLAMP  
  5V-6439 [2] PLATE  
  5P-2675 [4] BOLT (1/4-20X1.75-IN)  
17. 9K-0700 [2] GROMMET  
18. 5M-3062 [8] BOLT (3/8-16X0.75-IN)  
19. 3T-3045 [2] CLIP AS  
20. 9M-8406 [4] CLIP (LOOP)  
21. 4D-7794 [1] CLIP  
22. 3S-2093 [6] STRAP-CABLE  
  M   METRIC PART
 

#SEBP22140341
 

6C-8494: WIRING GP-MONITOR

6C-8494 WIRING GP-MONITOR
S/N 9YJ1-99999
PART OF 6C-5342 MONITOR AR-PAYLOAD
Type 1
i00188878 SEBP2214
6C8494 WIRING GP-MONITOR Parts scheme 6C8494 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8188 [3] NUT (1/2-13-THD)  
2. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
5. 8K-1253 [2] ROD END  
6. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
7. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  5C-2890 M [3] NUT (M6X1-THD)  
  9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
8. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
9. 4E-2453 [1] SHAFT  
10. 3E-5400 [1] SENSOR GP-POSITION (LIFT)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
  9X-1813 SLEEVE (72CM)  
11. 6D-3025 [2] BALL BEARING  
12. 2L-6726 [2] RING-RETAINING  
13. 2H-3429 [1] RING-RETAINING  
14. 6C-8636 [1] COVER  
15. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 2M-2292 [1] ROD  
17. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
18. 6S-4868 [1] LEVER  
19. 8T-2502 [1] BOLT (3/8-16X1.125-IN)(SLOT)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 4E-2250 [1] HOUSING  
21. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
22. 4E-2452 [1] ARM-BAIL  
23. 3T-7567 [1] BAR  
24. 8C-3678 [3] STUD-WELD (1/2-13X1.125-IN)  
25. 4K-8479 [4] STUD-WELD (3/8-16X1.25-IN)  
26. 6V-8188 [2] NUT (1/2-13-THD)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  8C-3678 [2] STUD-WELD (1/2-13X1.125-IN)  
27. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  4S-4455 [1] CLIP  
28. 4E-2448 [1] BRACKET  
29. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 6V-8397 [2] SEAL-O-RING  
31. 9R-2152 I [1] HOSE AS  
32. 8R-7723 [1] ADAPTER  
  1P-3703 [1] SEAL-RECTANGULAR  
33. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
34. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
35. 6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
36. 103-2040 CY [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
37. 8N-4326 [1] BRACE  
38. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 3E-9293 C [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
  9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
41. 6C-8422 [1] PLATE AS  
42. 4E-2460 [1] HARNESS AS  
43. 4E-9687 [1] HARNESS AS  
44. 033-8248 [4] CLIP  
  6V-8801 [4] NUT (3/8-16-THD)  
45. 6C-8640 [1] SUPPORT AS  
46. 7K-1181 [12] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140342
 

6C-8494: WIRING GP-MONITOR

6C-8494 WIRING GP-MONITOR
S/N 9YJ1-99999
PART OF 6C-5342 MONITOR AR-PAYLOAD
Type 2
i00188879 SEBP2214
6C8494 WIRING GP-MONITOR Parts scheme 6C8494 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8188 [3] NUT (1/2-13-THD)  
2. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
5. 8K-1253 [2] ROD END  
6. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
7. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  5C-2890 M [3] NUT (M6X1-THD)  
  9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
8. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
9. 4E-2453 [1] SHAFT  
10. 110-8190 CY [1] SENSOR GP-POSITION (LIFT)  
11. 6D-3025 [2] BALL BEARING  
12. 2L-6726 [2] RING-RETAINING  
13. 2H-3429 [1] RING-RETAINING  
14. 6C-8636 [1] COVER  
15. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 2M-2292 [1] ROD  
17. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
18. 6S-4868 [1] LEVER  
19. 8T-2502 [1] BOLT (3/8-16X1.125-IN)(SLOT)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 4E-2250 [1] HOUSING  
21. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
22. 4E-2452 [1] ARM-BAIL  
23. 3T-7567 [1] BAR  
24. 8C-3678 [3] STUD-WELD (1/2-13X1.125-IN)  
25. 4K-8479 [4] STUD-WELD (3/8-16X1.25-IN)  
26. 6V-8188 [2] NUT (1/2-13-THD)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  8C-3678 [2] STUD-WELD (1/2-13X1.125-IN)  
27. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  4S-4455 [1] CLIP  
28. 4E-2448 [1] BRACKET  
29. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 6V-8397 [2] SEAL-O-RING  
31. 9R-2152 I [1] HOSE AS  
32. 8R-7723 [1] ADAPTER  
  1P-3703 [1] SEAL-RECTANGULAR  
33. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
34. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
35. 6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
36. 103-2040 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
37. 8N-4326 [1] BRACE  
38. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 3E-9293 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
  9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
41. 6C-8422 [1] PLATE AS  
42. 4E-2460 [1] HARNESS AS  
43. 4E-9687 [1] HARNESS AS  
44. 033-8248 [4] CLIP  
  6V-8801 [4] NUT (3/8-16-THD)  
45. 6C-8640 [1] SUPPORT AS  
46. 7K-1181 [12] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140343
 

6C-8494: WIRING GP-MONITOR

6C-8494 WIRING GP-MONITOR
S/N 9YJ1-99999
PART OF 6C-5342 MONITOR AR-PAYLOAD
Type 3
i00188880 SEBP2214
6C8494 WIRING GP-MONITOR Parts scheme 6C8494 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8188 [3] NUT (1/2-13-THD)  
2. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
5. 8K-1253 [2] ROD END  
6. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
7. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  5C-2890 M [3] NUT (M6X1-THD)  
  9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
8. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
9. 4E-2453 [1] SHAFT  
10. 123-7416 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
11. 6D-3025 [2] BALL BEARING  
12. 2L-6726 [2] RING-RETAINING  
13. 2H-3429 [1] RING-RETAINING  
14. 6C-8636 [1] COVER  
15. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 2M-2292 [1] ROD  
17. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
18. 6S-4868 [1] LEVER  
19. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 4E-2250 [1] HOUSING  
21. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
22. 4E-2452 [1] ARM-BAIL  
23. 3T-7567 [1] BAR  
24. 8C-3678 [3] STUD-WELD (1/2-13X1.125-IN)  
25. 4K-8479 [4] STUD-WELD (3/8-16X1.25-IN)  
26. 6V-8188 [2] NUT (1/2-13-THD)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  8C-3678 [2] STUD-WELD (1/2-13X1.125-IN)  
27. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  4S-4455 [1] CLIP  
28. 4E-2448 [1] BRACKET  
29. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 6V-8397 C [3] SEAL-O-RING  
31. 9R-2152 I [1] HOSE AS  
32. 8R-7723 [1] ADAPTER  
  1P-3703 [1] SEAL-RECTANGULAR  
33. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
34. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
35. 6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
36. 124-4672 YC [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
37. 8N-4326 [1] BRACE  
38. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 3E-9293 C [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
  9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
41. 6C-8422 [1] PLATE AS  
42. 4E-2460 [1] HARNESS AS  
43. 4E-9687 [1] HARNESS AS  
44. 033-8248 [4] CLIP  
  6V-8801 [4] NUT (3/8-16-THD)  
45. 6C-8640 [1] SUPPORT AS  
46. 7K-1181 [12] STRAP-CABLE  
47. 122-2222 C [1] ADAPTER  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140344
 

6C-8494: WIRING GP-MONITOR

6C-8494 WIRING GP-MONITOR
S/N 9YJ1-99999
PART OF 6C-5342 MONITOR AR-PAYLOAD
Type 4
i00188881 SEBP2214
6C8494 WIRING GP-MONITOR Parts scheme 6C8494 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8188 [3] NUT (1/2-13-THD)  
2. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
5. 8K-1253 [2] ROD END  
6. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
7. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  5C-2890 M [3] NUT (M6X1-THD)  
  9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
8. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
9. 4E-2453 [1] SHAFT  
10. 123-7416 Y [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
11. 6D-3025 [2] BALL BEARING  
12. 2L-6726 [2] RING-RETAINING  
13. 2H-3429 [1] RING-RETAINING  
14. 6C-8636 [1] COVER  
15. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 2M-2292 [1] ROD  
17. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
18. 6S-4868 [1] LEVER  
19. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 4E-2250 [1] HOUSING  
21. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
22. 4E-2452 [1] ARM-BAIL  
23. 3T-7567 [1] BAR  
24. 8C-3678 [3] STUD-WELD (1/2-13X1.125-IN)  
25. 4K-8479 [4] STUD-WELD (3/8-16X1.25-IN)  
26. 6V-8188 [2] NUT (1/2-13-THD)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  8C-3678 [2] STUD-WELD (1/2-13X1.125-IN)  
27. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  4S-4455 [1] CLIP  
28. 4E-2448 [1] BRACKET  
29. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 6V-8397 [3] SEAL-O-RING  
31. 9R-2152 I [1] HOSE AS  
32. 8R-7723 [1] ADAPTER  
  1P-3703 [1] SEAL-RECTANGULAR  
33. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
34. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
35. 6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
36. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
37. 8N-4326 [1] BRACE  
38. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 130-6427 C [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
  9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
41. 6C-8422 [1] PLATE AS  
42. 4E-2460 [1] HARNESS AS  
43. 4E-9687 [1] HARNESS AS  
44. 033-8248 [4] CLIP  
  6V-8801 [4] NUT (3/8-16-THD)  
45. 6C-8640 [1] SUPPORT AS  
46. 7K-1181 [12] STRAP-CABLE  
47. 122-2222 [1] ADAPTER  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140345
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9YJ1-99999
PART OF 110-5698 MONITOR AR-PAYLOAD
Type 1
i00189389 SEBP2214
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-2040 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 [2] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-8915 [8] BOLT (3/8-16X3.25-IN)  
10. 4J-0520 [2] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 [2] ROD END  
19. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
20. 2M-2292 [1] ROD  
21. 8W-0580 [1] BLOCK  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 110-8190 Y [1] SENSOR GP-POSITION (LIFT)  
39. 111-5684 [1] ADAPTER  
40. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 109-0235 [1] BOX AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
42. 109-0236 [1] COVER  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 9S-4181 [1] PLUG (1-5/16-12-THD)  
45. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
46. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
47. 111-3410 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
48. 7X-7877 BE STRIP-EDGE  
49. 6C-8636 [1] COVER  
50. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
51. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
52. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
53. 7M-8485 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140346
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9YJ1-99999
PART OF 110-5698 MONITOR AR-PAYLOAD
Type 2
i00189390 SEBP2214
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-2040 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 [2] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 101-3677 C [1] ADAPTER  
10. 4J-0520 [1] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 C [1] ROD END  
19. 4F-2294 C [1] NUT-JAM (5/16-24-THD)  
20. 4L-6459 C [8] BOLT (3/8-16X2.5-IN)  
21. 8T-5005 CM [8] BOLT (M10X1.5X70-MM)  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 110-8190 Y [1] SENSOR GP-POSITION (LIFT)  
39. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 109-0235 [1] BOX AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
42. 109-0236 [1] COVER  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
45. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
46. 111-3410 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
47. 7X-7877 E STRIP-EDGE (30CM)  
48. 6C-8636 [1] COVER  
49. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
50. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
51. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
52. 114-1766 [1] ROD  
53. 5P-9683 C [1] ROD END (29.74MM ID)  
54. 8L-4496 C [1] NUT-JAM (5/16-24 LH-THD)  
55. 9W-0202 C [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140347
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9YJ2124-99999
PART OF 128-3791 MONITOR AR-PAYLOAD
i00189391 SEBP2214
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-4672 CY [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 C [3] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 101-3677 [1] ADAPTER  
10. 4J-0520 [1] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 [1] ROD END  
19. 4F-2294 [1] NUT-JAM (5/16-24-THD)  
20. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
21. 8T-5005 M [8] BOLT (M10X1.5X70-MM)  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 123-7416 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 109-0235 [1] BOX AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
42. 109-0236 [1] COVER  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
45. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
46. 111-3410 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
47. 7X-7877 E STRIP-EDGE (30CM)  
48. 6C-8636 [1] COVER  
49. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
50. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
51. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
52. 114-1766 [1] ROD  
53. 5P-9683 [1] ROD END (29.74MM ID)  
54. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
55. 9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
56. 122-2222 C [1] ADAPTER  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140348
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9YJ1-99999
PART OF 128-3791, 130-5198 MONITOR AR-PAYLOAD
Type 3
i00189392 SEBP2214
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 [3] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 101-3677 [1] ADAPTER  
10. 4J-0520 [1] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 [1] ROD END  
19. 4F-2294 [1] NUT-JAM (5/16-24-THD)  
20. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
21. 8T-5005 M [8] BOLT (M10X1.5X70-MM)  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 123-7416 Y [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4896 C [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 122-2222 [1] ADAPTER  
42. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
45. 114-1766 [1] ROD  
46. 5P-9683 [1] ROD END (29.74MM ID)  
47. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
48. 6C-8636 [1] COVER  
49. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22140349
 

122-3675: WIRING GP-PLATFORM

122-3675 WIRING GP-PLATFORM
S/N 9YJ2124-99999
PART OF 121-9296 PLATFORM AR
i00188543 SEBP2214
1223675 WIRING GP-PLATFORM Parts scheme 1223675 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 966F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
2. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT INCLUDES WEDGE)
3. 3S-2093 [8] STRAP-CABLE  
4. 111-9855 [1] BRACKET AS  
5. 4E-4686 [1] PLATE  
6. 4E-4687 [1] PLATE AS  
  3T-0049 [2] CLIP  
7. 4P-7581 [4] CLIP (LADDER)  
8. 4P-8134 [4] CLIP (LADDER)(FLAT)  
9. 102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES WEDGE)
10. 5C-8312 M [12] NUT (M4X0.7-THD)  
11. 5C-9553 M [4] BOLT (M6X1X16-MM)  
12. 5P-7657 BD SEAL  
13. 7K-1181 [11] STRAP-CABLE  
14. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [2] NUT (M10X1.5-THD)  
16. 8T-4138 M [4] BOLT (M6X1X20-MM)  
17. 110-0553 [1] WIRE AS  
18. 8T-8737 [20] PLUG-SEAL  
19. 8T-9405 M [12] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
20. 9G-3672 [1] HOUSING AS-CONNECTOR  
21. 9G-3695 [5] PLUG-SEAL  
22. 9X-2041 M [13] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
23. 9X-2043 M [8] SCREW-TRUSS HEAD (M6X1X14-MM)  
24. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
25. 096-6166 [12] WASHER-HARD (4.5X9X1-MM THK)  
26. 102-4129 [1] PLATE AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
27. 102-4130 [1] GASKET  
28. 117-1387 [1] HARNESS AS-CAB (MAIN-LOWER)  
29. 109-6280 [1] PLUG AS  
30. 112-5148 Y [1] CONTROL GP-AUTOSHIFT  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 966F II :

WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-ENGINE
7I-3469 WIRING GP-ENGINE
WIRING GP-ENGINE
107-0020 WIRING GP-ENGINE
WIRING GP-ENGINE
107-0020 WIRING GP-ENGINE
WIRING GP-ENGINE
107-0020 WIRING GP-ENGINE
WIRING GP-ENGINE
107-0020 WIRING GP-ENGINE
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-MONITOR
6C-8494 WIRING GP-MONITOR
WIRING GP-PAYLOAD SENSOR
110-8674 WIRING GP-PAYLOAD SENSOR
WIRING GP-PAYLOAD SENSOR
110-8674 WIRING GP-PAYLOAD SENSOR
WIRING GP-PAYLOAD SENSOR
110-8674 WIRING GP-PAYLOAD SENSOR
WIRING GP-PAYLOAD SENSOR
110-8674 WIRING GP-PAYLOAD SENSOR

Truck sale:

Caterpillar 966F II
 
Caterpillar 966F II
- Wheel Loaders
FABICK CAT
 
 
Caterpillar 966FII, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 966FII, Construction
52,228 USD 
Caterpillar 966FII, Construction
- Wheel Loaders
TRACTOR & EQUIPMENT CO.
 
 
Caterpillar 966FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
 
80,000 
Caterpillar 966FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.