HYDRAULIC SYSTEM
HYDRAULIC GPKICKOUT & POSITIONER GP
LINES GP-FRONT
LINES GP-HYDRAULIC
COOLER GP
HYDRAULIC SYSTEM
HYDRAULIC GP#SEBP22180620
9U-4773: HYDRAULIC AR
9U-4773 HYDRAULIC AR
S/N 8TK1-99999
S/N 8TK1-99999
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS#SEBP22180621
121-9576: KICKOUT & POSITIONER GP
121-9576 KICKOUT & POSITIONER GP
S/N 8TK2704-99999
PART OF 115-9516 CONVERSION AR-MACHINE
S/N 8TK2704-99999
PART OF 115-9516 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-2675 | [2] | BOLT (1/4-20X1.75-IN) | |
| 2. | 4V-1939 | [2] | CLAMP | |
| 3. | 5V-6439 | [1] | PLATE | |
| 4. | 121-9577 | [1] | PLATE AS | |
| 5. | 1K-6925 | [1] | PIN-CLEVIS | |
| 6. | 3B-4617 | [1] | PIN-COTTER | |
| 7. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 2H-3903 | [2] | SETSCREW-SOCKET | |
| 9. | 121-9578 | [1] | ROD AS | |
| 10. | 120-0210 E | [10] | FILM-STRIPE (RED) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP22180622
9C-9750: KICKOUT & POSITIONER GP
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 C | [2] | BOLT (3/8-16X1-IN) | |
| 2. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 5V-1410 | [1] | HOLDER (SWITCH) | |
| 4. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 5. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8C-0566 C | [2] | WASHER (10.2X25.5X2.5-MM THK) | |
| 7. | 9X-9509 C | [1] | CONTROL GP-LIFT KICKOUT | |
| 8. | 5V-2787 | [1] | MAGNET AS | |
| 9. | 5P-1075 C | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 10. | 3K-7092 | [2] | NUT AS-SPRING | |
| 11. | 7X-0388 | [2] | BOLT (7/8-9X4.5-IN) | |
| 12. | 7X-0545 | [2] | WASHER-HARD (24X40X5-MM THK) | |
| 13. | 4E-5210 C | [1] | TUBE AS | |
| 14. | 4E-5209 C | [1] | BRACKET | |
| 15. | 6V-9025 C | [1] | SETSCREW | |
| 16. | 5S-7383 C | [2] | BOLT (3/8-16X1.75-IN) | |
| 17. | 8T-3601 | [4] | SETSCREW-SOCKET (1/4-20-THD) | |
| 18. | 4V-4840 | [1] | MAGNET AS | |
| 19. | 8T-8917 C | [2] | BOLT (1/2-13X1.25-IN) | |
| 20. | 8C-3121 C | [2] | BOLT (5/16-18X1.5-IN) | |
| 21. | 4E-5213 C | [1] | COVER AS | |
| 22. | 3E-5493 C | [1] | CONTROL GP-BUCKET POSITIONER | |
| 23. | 5D-0353 C | [2] | BOLT-LOCKING (3/8-16X1-IN) | |
| 24. | 8M-7145 C | [2] | WASHER (10.2X28.5X5-MM THK) | |
| 25. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP22180623
8R-3547: LINES GP-FRONT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-9088 | [1] | BRACKET | |
| 2. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 3. | 7X-0772 | [8] | WASHER-HARD (10.2X25.5X2.5-MM THK) | |
| 4. | 9C-9087 | [1] | BRACKET | |
| 5. | 8T-9382 | [24] | BOLT (7/16-14X1.25-IN) | |
| 6. | 8T-5360 | [30] | WASHER (12X22.5X2.5-MM THK) | |
| 7. | 2V-5043 I | [2] | HOSE AS | |
| 8. | 5V-7048 | [2] | BLOCK | |
| 9. | 1P-4578 | [12] | FLANGE-HALF | |
| 10. | 4J-0522 | [6] | SEAL-O-RING | |
| 11. | 4E-0220 | [1] | PLATE | |
| 12. | 5V-7047 | [4] | BLOCK | |
| 13. | 5V-7052 | [1] | TUBE AS | |
| 6K-1694 | [3] | CLIP | ||
| 14. | 8T-9380 | [10] | BOLT (7/16-14X1-IN) | |
| 15. | 5V-7051 | [1] | TUBE AS | |
| 6K-1694 | [3] | CLIP | ||
| 16. | 5H-4020 | [2] | COVER | |
| 17. | 9C-9201 | [1] | TUBE AS | |
| 18. | 8J-5914 | [1] | PLUG | |
| 19. | 2S-4078 | [1] | SEAL-O-RING | |
| 20. | 9C-9202 | [1] | TUBE AS | |
| 21. | 5V-7050 | [2] | PLATE | |
| 22. | 8C-6877 | [8] | BOLT (7/16-14X1.75-IN) | |
| 23. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 24. | 7V-6556 | [1] | ELBOW | |
| 25. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 26. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| 29. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 30. | 3J-1907 | [1] | SEAL-O-RING | |
| 31. | 6V-0852 | [1] | CAP-DUST | |
| 32. | 1P-7009 | [2] | CLIP | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP22180624
8R-3547: LINES GP-FRONT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-9088 | [1] | BRACKET | |
| 2. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 3. | 7X-0772 | [8] | WASHER-HARD (10.2X25.5X2.5-MM THK) | |
| 4. | 9C-9087 | [1] | BRACKET | |
| 5. | 8T-9382 | [24] | BOLT (7/16-14X1.25-IN) | |
| 6. | 8T-5360 | [30] | WASHER (12X22.5X2.5-MM THK) | |
| 7. | 2V-5043 I | [2] | HOSE AS | |
| 8. | 5V-7048 | [2] | BLOCK | |
| 9. | 1P-4578 | [12] | FLANGE-HALF | |
| 10. | 4J-0522 | [6] | SEAL-O-RING | |
| 11. | 123-9767 C | [1] | PLATE | |
| 12. | 5V-7047 | [4] | BLOCK | |
| 13. | 5V-7052 | [1] | TUBE AS | |
| 6K-1694 | [3] | CLIP | ||
| 14. | 8T-9380 | [10] | BOLT (7/16-14X1-IN) | |
| 15. | 5V-7051 | [1] | TUBE AS | |
| 6K-1694 | [3] | CLIP | ||
| 16. | 5H-4020 | [2] | COVER | |
| 17. | 115-1040 C | [1] | TUBE AS | |
| 18. | 8J-5914 | [1] | PLUG | |
| 19. | 2S-4078 | [1] | SEAL-O-RING | |
| 20. | 115-1039 C | [1] | TUBE AS | |
| 21. | 5V-7050 | [2] | PLATE | |
| 22. | 8C-6877 | [8] | BOLT (7/16-14X1.75-IN) | |
| 23. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 24. | 7V-6556 | [1] | ELBOW | |
| 25. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 26. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| 29. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 30. | 3J-1907 | [1] | SEAL-O-RING | |
| 31. | 6V-0852 | [1] | CAP-DUST | |
| 32. | 1P-7009 | [2] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP22180625
7V-8359: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-1777 I | [1] | HOSE AS | |
| 2. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| 3. | 7X-0345 | [4] | BOLT (5/8-11X1.75-IN) | |
| 4. | 8T-8916 | [18] | BOLT (7/16-14X1.5-IN) | |
| 8T-5360 | [18] | WASHER (12X22.5X2.5-MM THK) | ||
| 5. | 1P-4578 | [8] | FLANGE-HALF | |
| 4J-0522 | [4] | SEAL-O-RING | ||
| 6. | 5P-7470 | [1] | CLIP (SLOT) | |
| 5P-7471 | [1] | CLIP (TAB) | ||
| 7. | 5P-8182 | [1] | GROMMET (46-MM ID) | |
| 8. | 7X-3327 | [1] | BOLT-LOCKING (1/2-13X1.25-IN) | |
| 9. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 7V-6428 | [1] | KEEPER | |
| 11. | 8T-8919 | [4] | BOLT (1/2-13X1.75-IN) | |
| 12. | 1P-4579 | [4] | FLANGE-HALF | |
| 8T-7214 | [2] | SEAL (54.55-MM ID) | ||
| 13. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-0852 | [1] | CAP-DUST | ||
| 14. | 8J-5914 | [1] | PLUG | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 15. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 16. | 8T-8920 | [2] | BOLT (1/2-13X3.25-IN) | |
| 17. | 5V-8898 | [1] | ELBOW | |
| 18. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 19. | 5P-2424 | [2] | BOLT (1/2-13X2.25-IN) | |
| 20. | 4V-1776 I | [1] | HOSE AS | |
| 21. | 2H-6338 | [2] | SEAL-O-RING | |
| 22. | 6C-1511 | [1] | TUBE AS | |
| 23. | 3V-0928 | [1] | PLATE | |
| 24. | 4V-1775 I | [1] | HOSE AS | |
| 25. | 8T-4985 | [2] | CLAMP-HOSE | |
| 26. | 3V-0937 | [1] | ELBOW | |
| 27. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 28. | 1P-4585 | [2] | FLANGE-HALF | |
| 29. | 7X-0347 | [4] | BOLT (5/8-11X2.25-IN) | |
| 30. | 8T-4122 | [8] | WASHER-HARD (17X32X3.5-MM THK) | |
| 31. | 3V-0932 | [1] | TUBE AS | |
| 32. | 4V-1878 | [1] | HOSE | |
| 33. | 6E-3528 CY | [1] | VALVE GP-BREAKER RELIEF | |
| 3D-2824 C | [1] | SEAL-O-RING | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22180626
7V-8359: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-3573 CI | [1] | HOSE AS | |
| 2. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| 3. | 7X-0345 | [4] | BOLT (5/8-11X1.75-IN) | |
| 4. | 8T-8916 | [18] | BOLT (7/16-14X1.5-IN) | |
| 8T-5360 | [18] | WASHER (12X22.5X2.5-MM THK) | ||
| 5. | 1P-4578 | [8] | FLANGE-HALF | |
| 4J-0522 | [4] | SEAL-O-RING | ||
| 6. | 5P-7470 | [1] | CLIP (SLOT) | |
| 5P-7471 | [1] | CLIP (TAB) | ||
| 7. | 5P-8182 | [1] | GROMMET (46-MM ID) | |
| 8. | 7X-3327 | [1] | BOLT-LOCKING (1/2-13X1.25-IN) | |
| 9. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 7V-6428 | [1] | KEEPER | |
| 11. | 8T-8919 | [4] | BOLT (1/2-13X1.75-IN) | |
| 12. | 1P-4579 | [4] | FLANGE-HALF | |
| 8T-7214 | [2] | SEAL (54.55-MM ID) | ||
| 13. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-0852 | [1] | CAP-DUST | ||
| 14. | 8J-5914 | [1] | PLUG | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 15. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 16. | 8T-8920 | [2] | BOLT (1/2-13X3.25-IN) | |
| 17. | 5V-8898 | [1] | ELBOW | |
| 18. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 19. | 5P-2424 | [2] | BOLT (1/2-13X2.25-IN) | |
| 20. | 4V-1776 I | [1] | HOSE AS | |
| 21. | 2H-6338 | [2] | SEAL-O-RING | |
| 22. | 6C-1511 | [1] | TUBE AS | |
| 23. | 3V-0928 | [1] | PLATE | |
| 24. | 4V-1775 I | [1] | HOSE AS | |
| 25. | 8T-4985 | [2] | CLAMP-HOSE | |
| 26. | 3V-0937 | [1] | ELBOW | |
| 27. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 28. | 1P-4585 | [2] | FLANGE-HALF | |
| 29. | 7X-0347 | [4] | BOLT (5/8-11X2.25-IN) | |
| 30. | 8T-4122 | [8] | WASHER-HARD (17X32X3.5-MM THK) | |
| 31. | 3V-0932 | [1] | TUBE AS | |
| 32. | 4V-1878 | [1] | HOSE | |
| 33. | 6E-3528 Y | [1] | VALVE GP-BREAKER RELIEF | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22180627
122-1587: LINES GP-HYDRAULIC FAN
122-1587 LINES GP-HYDRAULIC FAN
S/N 8TK3231-99999
PART OF 121-6000 CONVERSION AR-MACHINE
S/N 8TK3231-99999
PART OF 121-6000 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 122-1588 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22180628
122-1588: LINES GP-HYDRAULIC FAN
122-1588 LINES GP-HYDRAULIC FAN
S/N 8TK3231-99999
PART OF 122-1587 LINES GP-HYDRAULIC FAN
S/N 8TK3231-99999
PART OF 122-1587 LINES GP-HYDRAULIC FAN
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8716 | [4] | CONNECTOR (STRAIGHT) | |
| 2. | 7M-8485 | [4] | SEAL-O-RING | |
| 3. | 2M-9780 | [1] | SEAL-O-RING | |
| 4. | 6V-8721 | [1] | ELBOW | |
| 5. | 6V-8398 | [7] | SEAL-O-RING | |
| 6. | 6V-8936 | [1] | REDUCER | |
| 7. | 7Y-4190 I | [1] | HOSE AS | |
| 8. | 6V-8397 | [11] | SEAL-O-RING | |
| 9. | 124-8017 I | [1] | HOSE AS | |
| 10. | 6V-9746 | [12] | SEAL-O-RING | |
| 11. | 6K-0806 | [4] | STRAP-CABLE | |
| 12. | 8T-7876 | [2] | SEAL-O-RING | |
| 13. | 119-6407 | [2] | CONNECTOR | |
| 14. | 3D-2824 | [4] | SEAL-O-RING | |
| 15. | 118-2460 | [1] | VALVE-THERMAL COMPENSATOR | |
| 16. | 124-8019 I | [1] | HOSE AS | |
| 17. | 6V-9876 | [1] | ELBOW | |
| 18. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 19. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 6V-8997 | [1] | UNION | |
| 21. | 2P-1293 | [1] | LOCKNUT (1-3/16-12-THD) | |
| 22. | 6V-8942 | [2] | REDUCER-O-RING | |
| 23. | 6V-8556 | [3] | NUT (1-3/16-12-THD)(1-3/16-12 THD) | |
| 24. | 6V-8995 | [1] | UNION (STRAIGHT) | |
| 25. | 6V-9169 | [1] | NUT (13/16-16-THD) | |
| 26. | 124-8016 I | [1] | HOSE AS | |
| 27. | 8S-0948 | [2] | CLIP | |
| 28. | 6V-8801 | [5] | NUT (3/8-16-THD) | |
| 29. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 30. | 124-8018 I | [1] | HOSE AS | |
| 31. | 120-0684 | [1] | MANIFOLD | |
| 32. | 119-6409 | [1] | BRACKET | |
| 33. | 8T-3647 M | [3] | BOLT (M8X1.25X80-MM) | |
| 34. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 35. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 6V-8636 | [1] | CONNECTOR | |
| 37. | 3J-1907 | [6] | SEAL-O-RING | |
| 38. | 6V-8724 | [1] | ELBOW | |
| 39. | 8T-1905 | [1] | ELBOW | |
| 40. | 128-8409 | [1] | SPACER | |
| 41. | 124-8023 | [1] | ELBOW | |
| 42. | 6V-8637 | [2] | CONNECTOR | |
| 43. | 123-3317 | [1] | TUBE AS | |
| 44. | 122-7032 | [1] | TUBE AS | |
| 45. | 1L-2731 | [2] | CLAMP-TUBE | |
| 46. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 47. | 124-8020 I | [1] | HOSE AS | |
| 48. | 9M-4972 | [2] | CLIP (LOOP) | |
| 49. | 124-8015 I | [1] | HOSE AS | |
| 50. | 124-8021 I | [1] | HOSE AS | |
| 51. | 6C-6540 I | [1] | HOSE AS | |
| 52. | 6V-9161 | [1] | TEE | |
| 53. | 3J-7354 | [1] | SEAL-O-RING | |
| 54. | 8T-0788 | [1] | ELBOW | |
| 55. | 8T-6907 | [1] | VALVE-BALL | |
| 56. | 8T-6663 | [1] | ADAPTER-PORT | |
| 57. | 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | |
| 58. | 087-4441 I | [1] | HOSE AS | |
| 59. | 3K-0360 | [1] | SEAL-O-RING | |
| 60. | 4I-1025 I | [1] | HOSE AS | |
| 61. | 6V-9007 | [1] | ELBOW | |
| 62. | 6V-9839 | [1] | TEE-SWIVEL | |
| 63. | 120-0685 | [1] | ADAPTER | |
| 64. | 9X-2614 | [1] | CONNECTOR | |
| 65. | 6V-9875 | [1] | CONNECTOR | |
| 66. | 3S-8665 | [2] | CLIP (LOOP) | |
| 67. | 2S-4078 | [1] | SEAL-O-RING | |
| 68. | 123-3332 | [1] | ADAPTER-PUMP | |
| 69. | 1H-6227 | [1] | SEAL-O-RING | |
| 70. | 9Y-4634 | [1] | GASKET | |
| 71. | 9U-3224 I | [1] | HOSE AS | |
| 72. | 121-6016 Y | [1] | PUMP GP-PISTON | |
| 73. | 7C-3179 | [1] | GEAR (50-TEETH) | |
| 74. | 7F-6547 | [1] | NUT | |
| 75. | 125-9118 | [1] | PIN-COTTER | |
| 76. | 5K-9090 | [1] | SEAL-O-RING | |
| 77. | 128-7752 | [1] | SUPPORT AS | |
| 78. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22180629
117-3696: LINES GP-HYDRAULIC OIL COOLER
117-3696 LINES GP-HYDRAULIC OIL COOLER
S/N 8TK3065-99999
PART OF 106-0426 CHASSIS AR, 115-9516 CONVERSION AR-MACHINE
S/N 8TK3065-99999
PART OF 106-0426 CHASSIS AR, 115-9516 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 950F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8637 | [2] | CONNECTOR | |
| 2. | 3D-2824 | [2] | SEAL-O-RING | |
| 3. | 117-3418 | [1] | TUBE AS | |
| 4. | 6V-9746 | [2] | SEAL-O-RING | |
| 5. | 6V-8398 | [4] | SEAL-O-RING | |
| 6. | 117-3417 | [1] | TUBE AS | |
| 7. | 3S-8665 | [6] | CLIP (LOOP) | |
| 8. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 10. | 117-0378 I | [1] | HOSE AS | |
| 11. | 117-0379 I | [1] | HOSE AS | |
| 12. | 6D-4247 | [3] | CLIP | |
| 13. | 8T-4896 | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 15. | 9V-9116 | [3] | SPACER (11.11X19.05X165-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
