AVSPARE.COM
parts catalog

102-0050 SENSOR GP-TEMPERATURE 8-VOLT, 500-HERTZ PART OF 154-3850 SENSOR GP-ENGINE AN ATTACHMENT G3516




ELECTRICAL AND STARTING SYSTEM

SENSOR GP
 

#SEBP22220720
 

102-0050: SENSOR GP-TEMPERATURE

102-0050 SENSOR GP-TEMPERATURE
8-VOLT, 500-HERTZ
PART OF 154-3850 SENSOR GP-ENGINE
AN ATTACHMENT
i00464915 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-3271 [1] ADAPTER (1/2-14-THD)  
2. 134-2252 Y [1] SENSOR GP-TEMPERATURE (8-VOLT)(AIR)  
3. 3J-1907 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22220721
 

113-9126: SENSOR GP-TEMPERATURE

113-9126 SENSOR GP-TEMPERATURE
PART OF 154-3850 SENSOR GP-ENGINE
AN ATTACHMENT
i00480194 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 8T-8737 [1] PLUG-SEAL  
 

#SEBP22220722
 

134-2252: SENSOR GP-TEMPERATURE

134-2252 SENSOR GP-TEMPERATURE
8-VOLT. PULSE WIDTH MODULATED
PART OF 102-0050 SENSOR GP-TEMPERATURE
AN ATTACHMENT
i00748517 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP22220723
 

175-5341: SENSOR GP-TEMPERATURE

175-5341 SENSOR GP-TEMPERATURE
PART OF 113-3380 WIRING GP-EIS, 192-4134 WIRING GP-PYROMETER
AN ATTACHMENT
i01174475 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 8T-8737 [1] PLUG-SEAL  
 

#SEBP22220724
 

180-5420: SENSOR GP-TEMPERATURE

180-5420 SENSOR GP-TEMPERATURE
PART OF 113-3380 WIRING GP-EIS, 192-4134 WIRING GP-PYROMETER
Type 1
AN ATTACHMENT
i01277502 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
2. 8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
3. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 8T-8737 [1] PLUG-SEAL  
  E   ORDER BY THE CENTIMETER
 

#SEBP22220725
 

180-5420: SENSOR GP-TEMPERATURE

180-5420 SENSOR GP-TEMPERATURE
PART OF 113-3380 WIRING GP-EIS, 192-4134 WIRING GP-PYROMETER
Type 2
AN ATTACHMENT
i05676489 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 383-2980 C [1] SENSOR GP-TEMPERATURE (THERMOCOUPLE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22220726
 

241-9591: SENSOR GP-TEMPERATURE

241-9591 SENSOR GP-TEMPERATURE
PART OF 113-3380 WIRING GP-EIS, 192-4134 WIRING GP-PYROMETER
AN ATTACHMENT
i02108689 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 383-2989 [1] SENSOR GP-TEMPERATURE (THERMOCOUPLE)  
 

#SEBP22220727
 

9W-0532: SENSOR GP-TEMPERATURE

9W-0532 SENSOR GP-TEMPERATURE
PART OF 142-2282 SENSOR GP-ENGINE
AN ATTACHMENT
i00068680 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP22220728
 

108-6424: SHUTOFF GP-ELECTRICAL

108-6424 SHUTOFF GP-ELECTRICAL
Type 1
AN ATTACHMENT
i00484992 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0914 [1] SWITCH GP-TEMPERATURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
2. 7E-9291 [1] SWITCH AS-TEMPERATURE (AIR)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
3. 3K-0360 [1] SEAL-O-RING  
4. 4P-6160 [1] CONTACTOR AS  
5. 6I-1182 [1] TUBE AS  
6. 9W-5565 Y [1] SENSOR GP-TEMP & PRESS (ENGINE OIL)  
7. 108-7871 Y [1] CONTROL GP-ENGINE MONITORING (COGENERATION)  
8. 9X-9615 [7] TERMINAL (SINGLE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22220729
 

108-6424: SHUTOFF GP-ELECTRICAL

108-6424 SHUTOFF GP-ELECTRICAL
Type 2
AN ATTACHMENT
i00484993 SEBP2222
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0914 [1] SWITCH GP-TEMPERATURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
2. 7E-9291 [1] SWITCH AS-TEMPERATURE (INLET AIR)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
3. 3K-0360 [1] SEAL-O-RING  
4. 4P-6160 [1] CONTACTOR AS  
5. 6I-1182 [1] TUBE AS  
6. 9W-5565 Y [1] SENSOR GP-TEMP & PRESS (ENGINE OIL)  
7. 108-7871 Y [1] CONTROL GP-ENGINE MONITORING (COGENERATION)  
8. 9X-9615 [7] TERMINAL (SINGLE)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Operation and Maintenance Manual
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901}
Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Technical Information Bulletin
135-9851 Oxygen Sensor Adapter Ringer Installation
135-9851 Oxygen Sensor Adapter Ringer Installation
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Specifications
Detonation Sensor
G3500 Engines
Speed Sensor
G3500 Engines
Detonation Sensor
G3500 Engines
Speed Sensor
G3500 Engines
Pressure Sensor
G3500 Engines
Oxygen Sensor
G3500 Engines
Pressure Sensor
G3500 Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
EMCPII+ for Gas Engines
Sensor
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Testing and Adjusting
Speed Sensor (Engine) - Adjust
EMCPII+ for Gas Engines
Detonation Sensor
G3500 Engines
Speed Sensor - Adjust
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Temperature Sensor - Test
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Troubleshooting
GSC CID 0100 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0100 - FMI 04
EMCPII+ for Gas Engines
GSC CID 0110 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0111 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0110 - FMI 04
EMCPII+ for Gas Engines
GSC CID 0175 - FMI 02
EMCPII+ for Gas Engines
GSC CID 0175 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0175 - FMI 04
EMCPII+ for Gas Engines
GSC CID 0190 - FMI 02
EMCPII+ for Gas Engines
GSC CID 0190 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0269 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0269 - FMI 04
EMCPII+ for Gas Engines
Detonation Sensors
G3500 Engines
Engine Speed Sensor
G3500 Engines
01 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
02 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
08 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
09 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Disassembly and Assembly
Service Magazine

Caterpillar Parts SIS Catalog G3516 :

Truck sale:

59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.