AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

120-9715 WIRING GP-ENGINE -FUEL RATIO CONTROL AN ATTACHMENT G3516 GAS ENGINE


ELECTRICAL AND STARTING SYSTEM
WIRING GP

GAS ENGINE G3516 GAS ENGINE 8LD
 G3516 Engine Electronic Ignition System 8LD00001-UP SEBP2222 G3516 8LD   (1991)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-EIS
113-3380 WIRING GP-EIS
WIRING GP-EIS
154-3856 WIRING GP-EIS
WIRING GP-ENGINE
120-9715 WIRING GP-ENGINE
WIRING GP-ENGINE
131-3875 WIRING GP-ENGINE
WIRING GP-ENGINE
141-1483 WIRING GP-ENGINE
WIRING GP-ENGINE
154-3848 WIRING GP-ENGINE
 

#SEBP22220850
 

120-9715: WIRING GP-ENGINE

120-9715 WIRING GP-ENGINE -FUEL RATIO CONTROL
AN ATTACHMENT
i00525762 SEBP2222
1209715 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 037-7692 [1] NUT (2-11 1/2NPS)  
2. 108-1702 [18] TERMINAL (SINGLE)  
3. 116-5137 [1] SPACER (TERMINAL)  
4. 116-5142 [5] TERMINAL (DOUBLE)  
5. 116-5193 [1] COVER-END  
6. 120-9714 [1] KIT-MARKER  
7. 123-4873 [1] BUSHING  
8. 123-4875 [1] BUSHING  
9. 123-5222 [1] PLATE  
 

#SEBP22220851
 

131-3875: WIRING GP-ENGINE

131-3875 WIRING GP-ENGINE
PART OF 133-3695 CONVERSION AR-ENGINE
AN ATTACHMENT
i00509306 SEBP2222
1313875 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6772 [40] STRAP-CABLE  
2. 4P-7581 [8] CLIP (LADDER)  
3. 4P-8134 [25] CLIP (LADDER)  
4. 130-7061 [1] HARNESS AS-WIRING  
  5P-6009 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.5-M)  
  6I-0755 [2] PLUG AS-CONNECTOR (3-PIN)  
  8T-5346 E TUBE-HEAT SHRINK (19.1-MM DIA)(10-CM)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  9X-3467 [1] CAP-PLUG  
  126-9424 E TUBE-HEAT SHRINK (3.2-MM DIA)(44-CM)  
5. 130-7064 [1] HARNESS AS-SENSOR (MANIFOLD AIR PRESSURE)  
  5P-6009 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.5-M)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(3-CM)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  126-9424 E TUBE-HEAT SHRINK (3.2-MM DIA)(44-CM)  
  131-4885 [1] PLUG AS-CONNECTOR  
6. 4P-7428 [1] CLIP (LADDER)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP22220852
 

141-1483: WIRING GP-ENGINE

141-1483 WIRING GP-ENGINE -EIS
AN ATTACHMENT
i00501193 SEBP2222
1411483 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
2. 9X-6772 [32] STRAP-CABLE  
3. 141-1848 [1] PLUG AS-CONNECTOR  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  3E-4367 [1] RING-RETAINING  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  5P-5623 D WIRE-ELECTRICAL (16-GA, BLACK)(0.1-M)  
  5P-5677 D WIRE (18-GA, BLACK)(0.1-M)  
  8T-8730 [24] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [16] PLUG-SEAL  
4. 149-1390 Y [1] HARNESS AS-SENSOR (EMCP II)  
5. 0S-0509 [15] BOLT (3/8-16X0.75-IN)  
6. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
7. 4P-7429 [2] CLIP (LADDER)  
8. 4P-7581 [2] CLIP (LADDER)  
9. 4P-8134 [22] CLIP (LADDER)  
10. 5M-2894 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
13. 4P-7428 [1] CLIP (LADDER)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22220853
 

154-3848: WIRING GP-ENGINE

154-3848 WIRING GP-ENGINE -EIS
PART OF 154-3847 CONTROL GP-EMCP ELECTRONIC
AN ATTACHMENT
i00917470 SEBP2222
1543848 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 9X-6772 [8] STRAP-CABLE  
3. 116-0118 [1] CLIP  
4. 154-3849 [1] HARNESS AS-ENGINE  
  5P-6009 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  5S-7433 [1] PLUG AS-CONNECTOR (2-PIN)  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  186-3735 [31] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [30] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
  8T-8737 [11] PLUG-SEAL  
  9X-1339 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  126-9424 E TUBE-HEAT SHRINK (3.2-MM DIA)(116-CM)  
  134-6258 E CABLE-ELECTRICAL (16-GA)(677-CM)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
5. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
6. 4P-7581 [2] CLIP (LADDER)  
7. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP22220854
 

154-3851: WIRING GP-ENGINE

154-3851 WIRING GP-ENGINE -ELECTRIC START
AN ATTACHMENT
i00916337 SEBP2222
1543851 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-3852 [1] HARNESS AS-WIRING (ELECTRIC START)  
  2L-8066 [2] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8071 [2] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  140-3063 [1] PLUG AS-CONNECTOR (4-PIN)  
2. 9X-6772 B [2] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP22220855
 

4P-9575: WIRING GP-ENGINE

4P-9575 WIRING GP-ENGINE
PART OF 4P-8890 CONTROL GP-ENGINE ELECTRONIC
i00540617 SEBP2222
4P9575 WIRING GP-ENGINE Parts scheme 4P9575 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7541 Y [1] WIRING GP-INSTR & IGNITION  
2. 9X-6772 [57] STRAP-CABLE  
3. 4P-7581 [28] CLIP (LADDER)  
4. 4P-8134 [23] CLIP (LADDER)  
5. 5M-2894 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 101-8925 Y [1] MOUNTING GP-INSTRUMENT PANEL  
7. 0S-1621 [1] BOLT (1/2-13X1-IN)  
8. 5P-8245 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
10. 4P-7428 [1] CLIP (LADDER)  
11. 4P-7429 [3] CLIP (LADDER)  
12. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
13. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22220856
 

107-7541: WIRING GP-INSTR & IGNITION

107-7541 WIRING GP-INSTR & IGNITION
PART OF 4P-9575 WIRING GP-ENGINE
i00474065 SEBP2222
1077541 WIRING GP-INSTR & IGNITION Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9571 Y [1] BOX GP-CONTROL PANEL  
2. 7C-9220 [1] PLUG AS  
3. 7W-2353 [8] PLUG AS  
4. 7W-2355 [1] PLUG AS  
5. 107-7542 Y [1] HARNESS AS-WIRING (EIS)  
6. 1L-6561 [1] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22220857
 

194-0908: WIRING GP-PANEL

194-0908 WIRING GP-PANEL -SPEED CONTROL
FOR USE WITH EIS WITH 70 PIN CONNECTORS, EMCP II
AN ATTACHMENT
i01903065 SEBP2222
1940908 WIRING GP-PANEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [6] STRAP-CABLE  
2. 9X-6772 [2] STRAP-CABLE  
3. 115-2245 [1] CIRCUIT BREAKER AS (0.5-AMPERE)  
4. 131-5451 Y [1] CONTROL AS-GOVERNOR  
5. 194-0900 [1] HARNESS AS-PANEL (SPEED CONTROL)  
6. 156-6175 [2] CLIP (LADDER)  
7. 8T-1688 [5] SCREW-MACHINE (10-24X12.7-MM)  
8. 8T-2228 [2] WASHER-HARD (6.5X17X2-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP22220858
 

222-8679: WIRING GP-PANEL

222-8679 WIRING GP-PANEL -CABLE FITTING
FOR USE WITH 2-INCH CONNECTOR
AN ATTACHMENT
i01917162 SEBP2222
2228679 WIRING GP-PANEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 221-9657 [1] FITTING-CABLE (2-IN)  
 

#SEBP22220859
 

222-8680: WIRING GP-PANEL

222-8680 WIRING GP-PANEL -CABLE FITTING
FOR USE WITH 1.25-INCH CONNECTOR
AN ATTACHMENT
i01917167 SEBP2222
2228680 WIRING GP-PANEL Parts scheme
  For full view, you need register

Parts for your G3516 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-7316 [2] WASHER-REDUCING (2-IN TO 1-1/4-IN)(REDUCING)  
2. 221-9656 [1] FITTING-CABLE (1.25-IN)  
 

Information:

Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Wiring Harness Repair Kit for G3500 Engines with Electronic Ignition Systems (EIS){1408}
1995/01/01
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
1996/06/12
New Bracket Available To Support Gas Engine Ignition Group Wiring Harness Assembly {1408,1550}
1996/09/23
New Breakout Harness{1559}
1999/05/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
New Wiring Harness Assemblies Are Available To Service Engines Equipped With An Air Fuel Ratio Control (AFRC) Valve {1278, 1408}
2000/08/01
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/01
Field Returns of the Engine Speed Sensor are Necessary for Failure Analysis and Product Improvement {1907}
2000/06/01
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Selection Of Service Harness For Engines With Electronic Ignition System{1408}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Service Letter-NACD
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Schematic
Schematics & Wiring Diagrams
ELECTRONIC MODULAR CONTROL PANEL II (EMCP II)
Service Letter-Americas
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Technical Information Bulletin
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Product Support Program For Replacing EIS Engine Harnesses On Certain G3508, G3512, And G3516 EIS Engines
Testing and Adjusting
Connector Contact Identification of Generator Set Control
EMCPII+ for Gas Engines
Schematics and Wiring Diagrams
EMCPII+ for Gas Engines
Detonation Sensor
G3500 Engines
Manifold Air Pressure Sensor
G3500 Engines
Schematics and Wiring Diagrams
EMCPII+ for Gas Engines
Electrical Connector - Inspect
EMCP3
Wiring Harness (Open Circuit) - Test
EMCP3
Wiring Harness (Short Circuit) - Test
EMCP3
Troubleshooting
MID 014 - CID 0168 - FMI 02 System Voltage intermittent/erratic
G3500 Engines
MID 014 - CID 0300 - FMI 03 Primary Return short to +batt
G3500 Engines
MID 014 - CID 0300 - FMI 04 Primary Return short to ground
G3500 Engines
MID 014 - CID 0317 - FMI 08 Load Sensor (MAPS) signal abnormal
G3500 Engines
MID 014 - CID 0317 - FMI 11 No Inlet Manifold Pressure signal
G3500 Engines
MID 014 - CID 0318 - FMI 01 Loss of Right Bank Detonation Sensor Signal
G3500 Engines
MID 014 - CID 0318 - FMI 03 Right Bank Detonation Sensor short to +batt
G3500 Engines
MID 014 - CID 0318 - FMI 05 Right Bank Detonation Sensor open or short to ground
G3500 Engines
MID 014 - CID 0319 - FMI 01 Loss of Left Bank Detonation Sensor Signal
G3500 Engines
MID 014 - CID 0319 - FMI 03 Left Bank Detonation Sensor short to +batt
G3500 Engines
MID 014 - CID 0319 - FMI 05 Left Bank Detonation Sensor open or short to ground
G3500 Engines
MID 014 - CID 0320 - FMI 05 Timing Control Speed Sensor open/short to +batt
G3500 Engines
MID 014 - CID 0320 - FMI 07 Speed/Timing Sensor improper response
G3500 Engines
MID 014 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
G3500 Engines
MID 014 - CID 0322 - FMI 03 Shutdown Relay short to +batt
G3500 Engines
MID 014 - CID 0322 - FMI 05 Shutdown Relay open/short to ground
G3500 Engines
MID 014 - CID 0323 - FMI 03 Shutdown Lamp short to +batt
G3500 Engines
MID 014 - CID 0323 - FMI 05 Shutdown Lamp open/short to ground
G3500 Engines
MID 014 - CID 0324 - FMI 03 Warning Lamp short to +batt
G3500 Engines
MID 014 - CID 0324 - FMI 05 Warning Lamp open/short to ground
G3500 Engines
MID 014 - CID 0325 - FMI 00 Excessive Detonation
G3500 Engines
MID 014 - CID 0326 - FMI 01 Detonation Retarded Timing
G3500 Engines
MID 014 - CID 0327 - FMI 02 Number of Detonation Sensors mismatch
G3500 Engines
MID 014 - CID 0330 - FMI 11 Propane Timing Mode requested
G3500 Engines
MID 014 - CID 0331 - FMI 11 Ignition Shutdown requested
G3500 Engines
MID 018 - CID 0317 - FMI 11 No Inlet Manifold Pressure signal
G3500 Engines
MID 018 - CID 0523 - FMI 00 Engine Overspeed **Shutdown**
G3500 Engines
MID 018 - CID 0523 - FMI 02 Noisy Engine Speed signal
G3500 Engines
MID 018 - CID 0550 - FMI 02 Noisy or Loss of Oxygen Signal
G3500 Engines
MID 018 - CID 0523 - FMI 11 No A/F Ratio Engine Speed Sensor **Shutdown**
G3500 Engines
MID 018 - CID 0551 - FMI 01 Oxygen Sensor not connected to buffer
G3500 Engines
MID 018 - CID 0552 - FMI 11 Engine Speed present during an O2 calibration
G3500 Engines
Electrical Connectors and Functions
G3500 Engines
MID 018 - CID 0553 - FMI 11 Oxygen Signal present when it should not have been
G3500 Engines
MID 018 - CID 0554 - FMI 11 Oxygen Signal missing during O2 calibration step
G3500 Engines
MID 018 - CID 0555 - FMI 02 Noisy Oxygen signal
G3500 Engines
MID 018 - CID 0556 - FMI 11 Oxygen Sensor Calculated Gain out of range
G3500 Engines
MID 018 - CID 0557 - FMI 11 Oxygen Sensor Calculated Offset out of range
G3500 Engines
MID 018 - CID 0570 - FMI 11 Temperature Sensor Reading out of range
G3500 Engines
Detonation Sensors
G3500 Engines
Detonation Retard and Detonation Shutdown
G3500 Engines
Engine Speed/Timing Sensor - Calibrate
G3500 Engines
Electrical Power Supply
G3500 Engines
Engine Speed Sensor
G3500 Engines
Engine Speed/Timing Sensor
G3500 Engines
Inlet Manifold Pressure Sensor
G3500 Engines
Inlet Manifold Temperature Sensor
G3500 Engines
Inspecting Electrical Connectors
G3500 Engines
Oxygen Sensor Calibration Switch
G3500 Engines
Oxygen Sensor Signal
G3500 Engines
Propane Switch
G3500 Engines
Shutdown Lamp
G3500 Engines
Shutdown Relay
G3500 Engines
Warning Lamp Circuit - Test
G3500 Engines
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Speed Sensor Available With Improved Reliability{1907}
1994/04/11
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Caterpillar Parts SIS Catalog G3516 :

WIRING GP-EIS
154-3856 WIRING GP-EIS
WIRING GP-EIS
113-3380 WIRING GP-EIS
WIRING GP-EIS
113-3380 WIRING GP-EIS
WIRING GP-EIS
113-3380 WIRING GP-EIS
207-3814 WIRE AS
VALVE GP-SOLENOID
9Y-6992 VALVE GP-SOLENOID
VALVE GP-SOLENOID
9Y-6992 VALVE GP-SOLENOID
VALVE GP-SOLENOID
9Y-6061 VALVE GP-SOLENOID
WIRING GP-ENGINE
131-3875 WIRING GP-ENGINE
WIRING GP-ENGINE
141-1483 WIRING GP-ENGINE
WIRING GP-ENGINE
154-3848 WIRING GP-ENGINE
WIRING GP-ENGINE
154-3851 WIRING GP-ENGINE
WIRING GP-ENGINE
4P-9575 WIRING GP-ENGINE
WIRING GP-INSTR & IGNITION
107-7541 WIRING GP-INSTR & IGNITION
WIRING GP-PANEL
194-0908 WIRING GP-PANEL
WIRING GP-PANEL
222-8679 WIRING GP-PANEL

Truck sale:

Caterpillar G3516, Construction
59,000 USD 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
225,000 
Caterpillar G3516, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3516EP, Construction
206,200 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516EP, Construction
250,000 
Caterpillar G3516EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar G3516IN, Construction
224,900 
Caterpillar G3516IN, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.